da9063_ldo_lim_event() is only referenced in this driver, make it static.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

lp872x regulator driver can be built a module after commit 631a1fc4
"regulator: build: Allow most regulators to be built as modules".
Make REGULATOR_LP872X depend on I2C to allow building lp872x module when I2C=m.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Below is the equation in original code:

tps65217_uv1_ranges:
        0  ... 24: uV = vsel * 25000 + 900000;
        25 ... 52: uV = (vsel - 24) * 50000 + 1500000;
                      = (vsel - 25) * 50000 + 1550000;
        53 ... 55: uV = (vsel - 52) * 100000 + 2900000;
                      = (vsel - 53) * 100000 + 3000000;
        56 ... 62: uV = 3300000;

tps65217_uv2_ranges:
        0  ...  8: uV = vsel * 50000 + 1500000;
        9  ... 13: uV = (vsel - 8) * 100000 + 1900000;
                      = (vsel - 9) * 100000 + 2000000;
        14 ... 31: uV = (vsel - 13) * 50000 + 2400000;
                      = (vsel - 14) * 50000 + 2450000;

The voltage tables are composed of linear ranges.
This patch converts this driver to use multiple linear ranges APIs.

In original code, voltage range for DCDC1 is 900000 ~ 1800000 and voltage range
for DCDC3 is 900000 ~ 1500000.  This patch separates the range 25~52 in
tps65217_uv1_ranges table to two linear ranges: 25~30 and 31~52.
This change makes it possible to reuse the same linear_ranges table for DCDCx.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

regulator_register() does not return NULL, it returns ERR_PTR on error.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

All the current limit tables have the values in ascend order.
So we can slightly optimize the for loop iteration because the first match
is the minimal value.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Mostly for testing without bloating the kernel image rather than actual
utility.
Signed-off-by: Mark Brown <broonie@linaro.org>

Add a resource managed regulator_get_exclusive()
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Mark Brown <broonie@linaro.org>

The driver adds support for the following DA9063 PMIC regulators:
 - 11x LDOs (named LDO1 - LDO11),
 - 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),

Regulators provide following operations:
 - REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
 - REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
     - LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
     - buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
       and REGULATOR_MODE_STANDBY,
 - REGULATOR_CHANGE_CURRENT for buck converters (current limits).

The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.

Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.

This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

Pull staging fixes from Greg KH:
 "Here are two tiny staging tree fixes (well, one is for an iio driver,
  but those updates come through the staging tree due to dependancies)

  One fixes a problem with an IIO driver, and the other fixes a bug in
  the comedi driver core"

* tag 'staging-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: bug-fix NULL pointer dereference on failed attach
  iio: adjd_s311: Fix non-scan mode data read

Pull USB fixes from Greg KH:
 "Here are two USB fixes for 3.11-rc7

  One fixes a reported regression in the OHCI driver, and the other
  fixes a reported build breakage in the USB phy drivers"

* tag 'usb-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: phy: fix build breakage
  USB: OHCI: add missing PCI PM callbacks to ohci-pci.c

Pull ARM fixes from Russell King:
 "This round of fixes is smaller than previous: a couple more updates
  for the security fixes, and a one-liner kexec fix"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7816/1: CONFIG_KUSER_HELPERS: fix help text
  ARM: 7815/1: kexec: offline non panic CPUs on Kdump panic
  ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()

Pull vfs fixes from Al Viro:
 "Assorted fixes from the last week or so"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: collect_mounts() should return an ERR_PTR
  bfs: iget_locked() doesn't return an ERR_PTR
  efs: iget_locked() doesn't return an ERR_PTR()
  proc: kill the extra proc_readfd_common()->dir_emit_dots()
  cope with potentially long ->d_dname() output for shmem/hugetlb

Pull ACPI fix from Rafael Wysocki:
 "I really hoped that it wouldn't be necessary to change anything in
  ACPI at this point, but it turns out that we need to revert one more
  ACPI video commit causing trouble.

  This reverts a change in the ACPI video driver that caused the ACPI
  backlight initialization to be carried out even if acpi_backlight=vendor
  is passed in the kernel command line which turns out to break things
  at least on one system"

* tag 'acpi-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI / video: Always call acpi_video_init_brightness() on init"

Pull SCSI fixes from James Bottomley:
 "This is a set of small bug fixes for lpfc and zfcp and a fix for a
  fairly nasty bug in sg where a process which cancels I/O completes in
  a kernel thread which would then try to write back to the now gone
  userspace and end up writing to a random kernel address instead"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] zfcp: remove access control tables interface (keep sysfs files)
  [SCSI] zfcp: fix schedule-inside-lock in scsi_device list loops
  [SCSI] zfcp: fix lock imbalance by reworking request queue locking
  [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal
  [SCSI] lpfc: Don't force CONFIG_GENERIC_CSUM on

For a search buffer, 2 byte aligned, strchr() was returning pointer
outside of buffer (buf - 1)

------------->8----------------
    // Input buffer (default 4 byte aigned)
    char *buffer = "1AA_";

    // actual search start (to mimick 2 byte alignment)
    char *current_line = &(buffer[2]);

    // Character to search for
    char c = 'A';

    char *c_pos = strchr(current_line, c);

    printf("%s\n", c_pos) --> 'AA_' as oppose to 'A_'
------------->8----------------
Reported-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Debugged-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: <stable@vger.kernel.org> # [3.9 and 3.10]
Cc: Noam Camus <noamc@ezchip.com>
Signed-off-by: Joern Rennecke  <joern.rennecke@embecosm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This should actually be returning an ERR_PTR on error instead of NULL.
That was how it was designed and all the callers expect it.

[AV: actually, that's what "VFS: Make clone_mnt()/copy_tree()/collect_mounts()
return errors" missed - originally collect_mounts() was expected to return
NULL on failure]

Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

iget_locked() returns a NULL on error, it doesn't return an ERR_PTR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The iget_locked() function returns NULL on error and never an ERR_PTR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

proc_readfd_common() does dir_emit_dots() twice in a row,
we need to do this only once.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dynamic_dname() is both too much and too little for those - the
output may be well in excess of 64 bytes dynamic_dname() assumes
to be enough (thanks to ashmem feeding really long names to
shmem_file_setup()) and vsnprintf() is an overkill for those
guys.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull libata fixes from Tejun Heo:
 "This contains three commits all of which are updates for specific
  devices which aren't too widespread.  Pretty limited scope and nothing
  too interesting or dangerous"

* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  sata_fsl: save irqs while coalescing
  libata: apply behavioral quirks to sil3826 PMP
  sata, highbank: fix ordering of SGPIO signals

Pull cgroup fix from Tejun Heo:
 "A late fix for cgroup.

  This fixes a behavior regression visible to userland which was created
  by a commit merged during -rc1.  While the behavior change isn't too
  likely to be noticeable, the fix is relatively low risk and we'll need
  to backport it through -stable anyway if the bug gets released"

* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: fix a regression in validating config change

Pull drm fixes from Dave Airlie:
 "Ben was on holidays for a week so a few nouveau regression fixes
  backed up, but they all seem necessary.

  Otherwise one i915 and one gma500 fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  gma500: Fix SDVO turning off randomly
  drm/nv04/disp: fix framebuffer pin refcounting
  drm/nouveau/mc: fix race condition between constructor and request_irq()
  drm/nouveau: fix reclocking on nv40
  drm/nouveau/ltcg: fix allocating memory as free
  drm/nouveau/ltcg: fix ltcg memory initialization after suspend
  drm/nouveau/fb: fix null derefs in nv49 and nv4e init
  drm/i915: Invalidate TLBs for the rings after a reset

Commit 94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c)
renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h
but changed drivers/usb/phy/phy-fsm-usb.c to include not existing
"phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building:
  ...
  drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory
  compilation terminated.
  make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1

This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h
to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting
in another build breakage:
  ...
  In file included from drivers/usb/phy/phy-fsl-usb.c:46:0:
  drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory
  compilation terminated.
  make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1

Fix both issues.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: stable <stable@vger.kernel.org> # 3.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit c1117afb (USB: OHCI: make ohci-pci a separate driver)
neglected to preserve the entries for the pci_suspend and pci_resume
driver callbacks.  As a result, OHCI controllers don't work properly
during suspend and after hibernation.

This patch adds the missing callbacks to the driver.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Steve Cotton <steve@s.cotton.clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>