- 08 Dec, 2013 37 commits
-
-
Jiri Pirko authored
[ Upstream commit 6aafeef0 ] Pushing original fragments through causes several problems. For example for matching, frags may not be matched correctly. Take following example: <example> On HOSTA do: ip6tables -I INPUT -p icmpv6 -j DROP ip6tables -I INPUT -p icmpv6 -m icmp6 --icmpv6-type 128 -j ACCEPT and on HOSTB you do: ping6 HOSTA -s2000 (MTU is 1500) Incoming echo requests will be filtered out on HOSTA. This issue does not occur with smaller packets than MTU (where fragmentation does not happen) </example> As was discussed previously, the only correct solution seems to be to use reassembled skb instead of separete frags. Doing this has positive side effects in reducing sk_buff by one pointer (nfct_reasm) and also the reams dances in ipvs and conntrack can be removed. Future plan is to remove net/ipv6/netfilter/nf_conntrack_reasm.c entirely and use code in net/ipv6/reassembly.c instead. Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Pirko authored
[ Upstream commit 9037c357 ] If reassembled packet would fit into outdev MTU, it is not fragmented according the original frag size and it is send as single big packet. The second case is if skb is gso. In that case fragmentation does not happen according to the original frag size. This patch fixes these. Signed-off-by:
-
Vlad Yasevich authored
Commit 6d0bfe22 net: ipv6: Add IPv6 support to the ping socket introduced a change in the cleanup logic of inet6_init and has a bug in that ipv6_packet_cleanup() may not be called. Fix the cleanup ordering. CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Lorenzo Colitti <lorenzo@google.com> CC: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 1fa4c710 ] Offenders don't have port numbers, so set it to 0. Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit db31c55a ] If kmsg->msg_namelen > sizeof(struct sockaddr_storage) then in the original code that would lead to memory corruption in the kernel if you had audit configured. If you didn't have audit configured it was harmless. There are some programs such as beta versions of Ruby which use too large of a buffer and returning an error code breaks them. We should clamp the ->msg_namelen value instead. Fixes: 1661bf36 ("net: heap overflow in __audit_sockaddr()") Reported-by:
Eric Wong <normalperson@yhbt.net> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 85fbaa75 ] Commit bceaa902 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") conditionally updated addr_len if the msg_name is written to. The recv_error and rxpmtu functions relied on the recvmsg functions to set up addr_len before. As this does not happen any more we have to pass addr_len to those functions as well and set it to the size of the corresponding sockaddr length. This broke traceroute and such. Fixes: bceaa902 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") Reported-by:
Brad Spengler <spender@grsecurity.net> Reported-by: Tom Labanowski Cc: mpb <mpb.mail@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 68c6beb3 ] In that case it is probable that kernel code overwrote part of the stack. So we should bail out loudly here. The BUG_ON may be removed in future if we are sure all protocols are conformant. Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit f3d33426 ] This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by:
-
Hannes Frederic Sowa authored
[ Upstream commit cf970c00 ] A plain read() on a socket does set msg->msg_name to NULL. So check for NULL pointer first. Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit bceaa902 ] Only update *addr_len when we actually fill in sockaddr, otherwise we can return uninitialized memory from the stack to the caller in the recvfrom, recvmmsg and recvmsg syscalls. Drop the the (addr_len == NULL) checks because we only get called with a valid addr_len pointer either from sock_common_recvmsg or inet_recvmsg. If a blocking read waits on a socket which is concurrently shut down we now return zero and set msg_msgnamelen to 0. Reported-by:
mpb <mpb.mail@gmail.com> Suggested-by:
-
Eric Dumazet authored
[ Upstream commit f52ed899 ] For performance reasons, sch_fq tried hard to not setup timers for every sent packet, using a quantum based heuristic : A delay is setup only if the flow exhausted its credit. Problem is that application limited flows can refill their credit for every queued packet, and they can evade pacing. This problem can also be triggered when TCP flows use small MSS values, as TSO auto sizing builds packets that are smaller than the default fq quantum (3028 bytes) This patch adds a 40 ms delay to guard flow credit refill. Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 65c5189a ] Commit 7eec4174 ("pkt_sched: fq: fix non TCP flows pacing") obsoleted TCA_FQ_FLOW_DEFAULT_RATE without notice for the users. Suggested by David Miller Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c9e90429 ] ip4_datagram_connect() being called from process context, it should use IP_INC_STATS() instead of IP_INC_STATS_BH() otherwise we can deadlock on 32bit arches, or get corruptions of SNMP counters. Fixes: 584bdf8c ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP") Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Chris Metcalf authored
[ Upstream commit 1ca1a4cf ] In af3e095a, Erik Jacobsen fixed one type of unaligned access bug for ia64 by converting a 64-bit write to use put_unaligned(). Unfortunately, since gcc will convert a short memset() to a series of appropriately-aligned stores, the problem is now visible again on tilegx, where the memset that zeros out proc_event is converted to three 64-bit stores, causing an unaligned access panic. A better fix for the original problem is to ensure that proc_event is aligned to 8 bytes here. We can do that relatively easily by arranging to start the struct cn_msg aligned to 8 bytes and then offset by 4 bytes. Doing so means that the immediately following proc_event structure is then correctly aligned to 8 bytes. The result is that the memset() stores are now aligned, and as an added benefit, we can remove the put_unaligned() calls in the code. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Maciej Żenczykowski authored
[ Upstream commit 2abc2f07 ] Initial sch_fq implementation copied code from pfifo_fast to classify a packet as a high prio packet. This clashes with setups using PRIO with say 7 bands, as one of the band could be incorrectly (mis)classified by FQ. Packets would be queued in the 'internal' queue, and no pacing ever happen for this special queue. Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 1e9f3d6f ] Bug has been introduced by commit bb814094 ("ip6tnl: allow to use rtnl ops on fb tunnel"). When ip6_tunnel.ko is unloaded, FB device is delete by rtnl_link_unregister() and then we try to use the pointer in ip6_tnl_destroy_tunnels(). Let's add an handler for dellink, which will never remove the FB tunnel. With this patch it will no more be possible to remove it via 'ip link del ip6tnl0', but it's safer. The same fix was already proposed by Willem de Bruijn <willemb@google.com> for sit interfaces. CC: Willem de Bruijn <willemb@google.com> Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit f9a23c84 ] These strings come from a copy_from_user() and there is no way to be sure they are NUL terminated. Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 9434266f ] Bug: The fallback device is created in sit_init_net and assumed to be freed in sit_exit_net. First, it is dereferenced in that function, in sit_destroy_tunnels: struct net *net = dev_net(sitn->fb_tunnel_dev); Prior to this, rtnl_unlink_register has removed all devices that match rtnl_link_ops == sit_link_ops. Commit 205983c4 added the line + sitn->fb_tunnel_dev->rtnl_link_ops = &sit_link_ops; which cases the fallback device to match here and be freed before it is last dereferenced. Fix: This commit adds an explicit .delllink callback to sit_link_ops that skips deallocation at rtnl_unlink_register for the fallback device. This mechanism is comparable to the one in ip_tunnel. It also modifies sit_destroy_tunnels and its only caller sit_exit_net to avoid the offending dereference in the first place. That double lookup is more complicated than required. Test: The bug is only triggered when CONFIG_NET_NS is enabled. It causes a GPF only when CONFIG_DEBUG_SLAB is enabled. Verified that this bug exists at the mentioned commit, at davem-net HEAD and at 3.11.y HEAD. Verified that it went away after applying this patch. Fixes: 205983c4 ("sit: allow to use rtnl ops on fb tunnel") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit dccf76ca ] We had some reports of crashes using TCP fastopen, and Dave Jones gave a nice stack trace pointing to the error. Issue is that tcp_get_metrics() should not be called with a NULL dst Fixes: 1fe4c481 ("net-tcp: Fast Open client - cookie cache") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Tested-by:
Dave Jones <davej@fedoraproject.org> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit b869ccfa ] This patch fixes two race conditions between bond_store_updelay/downdelay and bond_store_miimon which could lead to division by zero as miimon can be set to 0 while either updelay/downdelay are being set and thus miss the zero check in the beginning, the zero div happens because updelay/downdelay are stored as new_value / bond->params.miimon. Use rtnl to synchronize with miimon setting. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Acked-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 98e09386 ] After commit c9eeec26 ("tcp: TSQ can use a dynamic limit"), several users reported throughput regressions, notably on mvneta and wifi adapters. 802.11 AMPDU requires a fair amount of queueing to be effective. This patch partially reverts the change done in tcp_write_xmit() so that the minimal amount is sysctl_tcp_limit_output_bytes. It also remove the use of this sysctl while building skb stored in write queue, as TSO autosizing does the right thing anyway. Users with well behaving NICS and correct qdisc (like sch_fq), can then lower the default sysctl_tcp_limit_output_bytes value from 128KB to 8KB. This new usage of sysctl_tcp_limit_output_bytes permits each driver authors to check how their driver performs when/if the value is set to a minimum of 4KB. Normally, line rate for a single TCP flow should be possible, but some drivers rely on timers to perform TX completion and too long TX completion delays prevent reaching full throughput. Fixes: c9eeec26 ("tcp: TSQ can use a dynamic limit") Signed-off-by:
Sujith Manoharan <sujith@msujith.org> Reported-by:
Arnaud Ebalard <arno@natisbad.org> Tested-by:
-
Jason Wang authored
[ Upstream commit 16a3fa28 ] We currently use hdr_len as a hint of head length which is advertised by guest. But when guest advertise a very big value, it can lead to an 64K+ allocating of kmalloc() which has a very high possibility of failure when host memory is fragmented or under heavy stress. The huge hdr_len also reduce the effect of zerocopy or even disable if a gso skb is linearized in guest. To solves those issues, this patch introduces an upper limit (PAGE_SIZE) of the head, which guarantees an order 0 allocation each time. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 96f8d9ec ] We currently use hdr_len as a hint of head length which is advertised by guest. But when guest advertise a very big value, it can lead to an 64K+ allocating of kmalloc() which has a very high possibility of failure when host memory is fragmented or under heavy stress. The huge hdr_len also reduce the effect of zerocopy or even disable if a gso skb is linearized in guest. To solves those issues, this patch introduces an upper limit (PAGE_SIZE) of the head, which guarantees an order 0 allocation each time. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jukka Rissanen authored
[ Upstream commit 1188f054 ] If priority/traffic class field in IPv6 header is set (seen when using ssh), the uncompression sets the TC and Flow fields incorrectly. Example: This is IPv6 header of a sent packet. Note the priority/TC (=1) in the first byte. 00000000: 61 00 00 00 00 2c 06 40 fe 80 00 00 00 00 00 00 00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00 00000020: 02 1e ab ff fe 4c 52 57 This gets compressed like this in the sending side 00000000: 72 31 04 06 02 1e ab ff fe 4c 52 57 ec c2 00 16 00000010: aa 2d fe 92 86 4e be c6 .... In the receiving end, the packet gets uncompressed to this IPv6 header 00000000: 60 06 06 02 00 2a 1e 40 fe 80 00 00 00 00 00 00 00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00 00000020: ab ff fe 4c 52 57 ec c2 First four bytes are set incorrectly and we have also lost two bytes from destination address. The fix is to switch the case values in switch statement when checking the TC field. Signed-off-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 81b9eab5 ] commit 06a23fe3 ("core/dev: set pkt_type after eth_type_trans() in dev_forward_skb()") and refactoring 64261f23 ("dev: move skb_scrub_packet() after eth_type_trans()") are forcing pkt_type to be PACKET_HOST when skb traverses veth. which means that ip forwarding will kick in inside netns even if skb->eth->h_dest != dev->dev_addr Fix order of eth_type_trans() and skb_scrub_packet() in dev_forward_skb() and in ip_tunnel_rcv() Fixes: 06a23fe3 ("core/dev: set pkt_type after eth_type_trans() in dev_forward_skb()") CC: Isaku Yamahata <yamahatanetdev@gmail.com> CC: Maciej Zenczykowski <zenczykowski@gmail.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 52f48d0d ] Since commit 7b0c5f21 "sierra_net: keep status interrupt URB active", sierra_net triggers status interrupt polling before the net_device is opened (in order to properly receive the sync message response). To be able to receive further interrupts, the interrupt urb needs to be re-submitted, so this patch removes the bogus check for netif_running(). Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Tested-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Veaceslav Falico authored
[ Upstream commit ec9f1d15 ] Currently the ARP monitoring is not supported with 802.3ad, and it's prohibited to use it via the module params. However we still can set it afterwards via sysfs, cause we only check for *LB modes there. To fix this - add a check for 802.3ad mode in bonding_store_arp_interval. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 51c37a70 ] For properly initialising the Tausworthe generator [1], we have a strict seeding requirement, that is, s1 > 1, s2 > 7, s3 > 15. Commit 697f8d03 ("random32: seeding improvement") introduced a __seed() function that imposes boundary checks proposed by the errata paper [2] to properly ensure above conditions. However, we're off by one, as the function is implemented as: "return (x < m) ? x + m : x;", and called with __seed(X, 1), __seed(X, 7), __seed(X, 15). Thus, an unwanted seed of 1, 7, 15 would be possible, whereas the lower boundary should actually be of at least 2, 8, 16, just as GSL does. Fix this, as otherwise an initialization with an unwanted seed could have the effect that Tausworthe's PRNG properties cannot not be ensured. Note that this PRNG is *not* used for cryptography in the kernel. [1] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme.ps [2] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme2.ps Joint work with Hannes Frederic Sowa. Fixes: 697f8d03 ("random32: seeding improvement") Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Florian Weimer <fweimer@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit f8c31c8f ] Fixes a suspicious rcu derference warning. Cc: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Signed-off-by:
-
Duan Jiong authored
[ Upstream commit f104a567 ] As the rfc 4191 said, the Router Preference and Lifetime values in a ::/0 Route Information Option should override the preference and lifetime values in the Router Advertisement header. But when the kernel deals with a ::/0 Route Information Option, the rt6_get_route_info() always return NULL, that means that overriding will not happen, because those default routers were added without flag RTF_ROUTEINFO in rt6_add_dflt_router(). In order to deal with that condition, we should call rt6_get_dflt_router when the prefix length is 0. Signed-off-by:
Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by:
-
Andreas Henriksson authored
[ Upstream commit 13eb2ab2 ] When trying to delete a table >= 256 using iproute2 the local table will be deleted. The table id is specified as a netlink attribute when it needs more then 8 bits and iproute2 then sets the table field to RT_TABLE_UNSPEC (0). Preconditions to matching the table id in the rule delete code doesn't seem to take the "table id in netlink attribute" into condition so the frh_get_table helper function never gets to do its job when matching against current rule. Use the helper function twice instead of peaking at the table value directly. Originally reported at: http://bugs.debian.org/724783Reported-by:
Nicolas HICHER <nhicher@avencall.com> Signed-off-by:
Andreas Henriksson <andreas@fatal.se> Signed-off-by:
-
Amir Vadai authored
[ Upstream commit 1ec4864b ] timecounter_init() was was called only after first potential timecounter_read(). Moved mlx4_en_init_timestamp() before mlx4_en_init_netdev() Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Andrey Vagin authored
[ Upstream commit 98bbc06a ] sk_filter isn't freed if bpf_func is equal to sk_run_filter. This memory leak was introduced by v3.12-rc3-224-gd45ed4a4 "net: fix unsafe set_memory_rw from softirq". Before this patch sk_filter was freed in sk_filter_release_rcu, now it should be freed in bpf_jit_free. Here is output of kmemleak: unreferenced object 0xffff8800b774eab0 (size 128): comm "systemd", pid 1, jiffies 4294669014 (age 124.062s) hex dump (first 32 bytes): 00 00 00 00 0b 00 00 00 20 63 7f b7 00 88 ff ff ........ c...... 60 d4 55 81 ff ff ff ff 30 d9 55 81 ff ff ff ff `.U.....0.U..... backtrace: [<ffffffff816444be>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811845af>] __kmalloc+0xef/0x260 [<ffffffff81534028>] sock_kmalloc+0x38/0x60 [<ffffffff8155d4dd>] sk_attach_filter+0x5d/0x190 [<ffffffff815378a1>] sock_setsockopt+0x991/0x9e0 [<ffffffff81531bd6>] SyS_setsockopt+0xb6/0xd0 [<ffffffff8165f3e9>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff v2: add extra { } after else Fixes: d45ed4a4 ("net: fix unsafe set_memory_rw from softirq") Acked-by:
Andrey Vagin <avagin@openvz.org> Acked-by:
-
Veaceslav Falico authored
[ Upstream commit b3241870 ] Currently we rely on rtnl locking in bond_set_rx_mode(), however it's not always the case: RTNL: assertion failed at drivers/net/bonding/bond_main.c (3391) ... [<ffffffff81651ca5>] dump_stack+0x54/0x74 [<ffffffffa029e717>] bond_set_rx_mode+0xc7/0xd0 [bonding] [<ffffffff81553af7>] __dev_set_rx_mode+0x57/0xa0 [<ffffffff81557ff8>] __dev_mc_add+0x58/0x70 [<ffffffff81558020>] dev_mc_add+0x10/0x20 [<ffffffff8161e26e>] igmp6_group_added+0x18e/0x1d0 [<ffffffff81186f76>] ? kmem_cache_alloc_trace+0x236/0x260 [<ffffffff8161f80f>] ipv6_dev_mc_inc+0x29f/0x320 [<ffffffff8161f9e7>] ipv6_sock_mc_join+0x157/0x260 ... Fix this by using RCU primitives. Reported-by:
Joe Lawrence <joe.lawrence@stratus.com> Tested-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 0e033e04 ] Commit 1e2bd517 ("udp6: Fix udp fragmentation for tunnel traffic.") changed the calculation if there is enough space to include a fragment header in the skb from a skb->mac_header dervived one to skb_headroom. Because we already peeled off the skb to transport_header this is wrong. Change this back to check if we have enough room before the mac_header. This fixes a panic Saran Neti reported. He used the tbf scheduler which skb_gso_segments the skb. The offsets get negative and we panic in memcpy because the skb was erroneously not expanded at the head. Reported-by:
Saran Neti <Saran.Neti@telus.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Dan Carpenter authored
upstream commit 6115c11f We assume that "mp->phy" can be NULL a couple lines before the dereference. Fixes: 1cce16d3 ('net: mv643xx_eth: Add missing phy_addr_set in DT mode') Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Jason Gunthorpe authored
Commit cc9d4598 'net: mv643xx_eth: use of_phy_connect if phy_node present' made the call to phy_scan optional, if the DT has a link to the phy node. However phy_scan has the side effect of calling phy_addr_set, which writes the phy MDIO address to the ethernet controller. If phy_addr_set is not called, and the bootloader has not set the correct address then the driver will fail to function. Tested on Kirkwood. Signed-off-by:
-
- 04 Dec, 2013 3 commits
-
-
Greg Kroah-Hartman authored
-
Nanno Langstraat authored
commit 43c83146 upstream. Use case: people who use both Apple and PC keyboards regularly, and desire to keep&use their PC muscle memory. A particular use case: an Apple compact external keyboard connected to a PC laptop. (This use case can't be covered well by X.org key remappings etc.) Signed-off-by:
Nanno Langstraat <langstr@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Tristan Rice authored
commit e17f5d76 upstream. This is a patch that adds the new Mayflash Gamecube Controller to USB adapter (ID 1a34:f705 ACRUX) to the ACRUX driver (drivers/hid/hid-axff.c) with full force feedback support. Signed-off-by:
Tristan Rice <rice@outerearth.net> Signed-off-by:
-
