- 09 Mar, 2018 1 commit
-
-
Randy Dunlap authored
Documentation updates for Documentation/cdrom/cdrom-standard.tex: cdrom_device_ops: - add check_events() and generic_packet() cdrom_device_info: - add one 'const' modifier - correct some field descriptions - add some missing fields - drop 'kdev_t dev;' field Also drop <n_discs> sentence from documentation because it is not referenced anywhere in the kernel header or C files. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 08 Mar, 2018 11 commits
-
-
Bart Van Assche authored
This patch helps to avoid that new code gets introduced in block drivers that manipulates queue flags without holding the queue lock when that lock should be held. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Bart Van Assche authored
Since it is not safe to use queue_flag_(set|clear)_unlocked() without holding the queue lock after the sysfs entries for a queue have been created, complain if this happens. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: -
Bart Van Assche authored
Use blk_queue_flag_set() instead of open-coding this function. Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Use blk_queue_flag_set() instead of open-coding this function. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Acked-by:
-
Bart Van Assche authored
Use the blk_queue_flag_{set,clear}() functions instead of open-coding these. Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:Michael Lyle <mlyle@lyle.org> Reviewed-by:
-
Bart Van Assche authored
Use the blk_queue_flag_*() functions instead of open-coding these. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Since the queue flags may be changed concurrently from multiple contexts after a queue becomes visible in sysfs, make these changes safe by protecting these with the queue lock. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Introduce functions that modify the queue flags and that protect these modifications with the request queue lock. Except for moving one wake_up_all() call from inside to outside a critical section, this patch does not change any functionality. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Except for changing the atomic queue flag manipulations that are protected by the queue lock into non-atomic manipulations, this patch does not change any functionality. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Move the definition of queue_flag_clear_unlocked() up and move the definition of queue_in_flight() down such that all queue flag manipulation function definitions become contiguous. This patch does not change any functionality. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
- 07 Mar, 2018 1 commit
-
-
Jonas Rabenstein authored
Tokens are prefixed by a variable length of bytes. If a bytestring is not stored in an tiny or short atom, we have to skip more than one byte in order to have the actual bytes not prefixed by the bytes describing the actual length of the string. Acked-by:
Jonathan Derrick <jonathan.derrick@intel.com> Signed-off-by:
Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by:
-
- 06 Mar, 2018 1 commit
-
-
Ming Lei authored
On ARM64, the default page size has been 64K on some distributions, and we should allow ARM64 people to play null_blk. This patch fixes the issue by extend page bitmap size for supporting other non-4KB PAGE_SIZE. Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Cc: Shaohua Li <shli@kernel.org> Cc: Kyungchan Koh <kkc6196@fb.com>, Cc: weiping zhang <zhangweiping@didichuxing.com> Cc: Yi Zhang <yi.zhang@redhat.com> Reported-by:
Yi Zhang <yi.zhang@redhat.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
- 01 Mar, 2018 2 commits
-
-
Arnd Bergmann authored
A change to the generic scatterlist code caused a conflict with the rtsx card reader driver: In file included from drivers/staging/rts5208/rtsx.h:180, from drivers/staging/rts5208/rtsx.c:28: drivers/staging/rts5208/rtsx_chip.h:343: error: "SG_END" redefined [-Werror] This changes one instance of the driver to prefix SG_END and related constants. Fixes: 723fbf56 ("lib/scatterlist: Add SG_CHAIN and SG_END macros for LSB encodings") Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Reviewed-by:Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
A change to the generic scatterlist code caused a conflict with the rtsx card reader driver: In file included from drivers/misc/cardreader/rtsx_pcr.c:32: include/linux/rtsx_pci.h:40: error: "SG_END" redefined [-Werror] This changes one instance of the driver to prefix SG_END and related constants. Fixes: 723fbf56 ("lib/scatterlist: Add SG_CHAIN and SG_END macros for LSB encodings") Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
- 28 Feb, 2018 16 commits
-
-
Bart Van Assche authored
Avoid that the following race can occur: blk_cleanup_queue() blkcg_print_blkgs() spin_lock_irq(lock) (1) spin_lock_irq(blkg->q->queue_lock) (2,5) q->queue_lock = &q->__queue_lock (3) spin_unlock_irq(lock) (4) spin_unlock_irq(blkg->q->queue_lock) (6) (1) take driver lock; (2) busy loop for driver lock; (3) override driver lock with internal lock; (4) unlock driver lock; (5) can take driver lock now; (6) but unlock internal lock. This change is safe because only the SCSI core and the NVME core keep a reference on a request queue after having called blk_cleanup_queue(). Neither driver accesses any of the removed data structures between its blk_cleanup_queue() and blk_put_queue() calls. Reported-by:Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by:
-
Bart Van Assche authored
Initialize the request queue lock earlier such that the following race can no longer occur: blk_init_queue_node() blkcg_print_blkgs() blk_alloc_queue_node (1) q->queue_lock = &q->__queue_lock (2) blkcg_init_queue(q) (3) spin_lock_irq(blkg->q->queue_lock) (4) q->queue_lock = lock (5) spin_unlock_irq(blkg->q->queue_lock) (6) (1) allocate an uninitialized queue; (2) initialize queue_lock to its default internal lock; (3) initialize blkcg part of request queue, which will create blkg and then insert it to blkg_list; (4) traverse blkg_list and find the created blkg, and then take its queue lock, here it is the default *internal lock*; (5) *race window*, now queue_lock is overridden with *driver specified lock*; (6) now unlock *driver specified lock*, not the locked *internal lock*, unlock balance breaks. The changes in this patch are as follows: - Move the .queue_lock initialization from blk_init_queue_node() into blk_alloc_queue_node(). - Only override the .queue_lock pointer for legacy queues because it is not useful for blk-mq queues to override this pointer. - For all all block drivers that initialize .queue_lock explicitly, change the blk_alloc_queue() call in the driver into a blk_alloc_queue_node() call and remove the explicit .queue_lock initialization. Additionally, initialize the spin lock that will be used as queue lock earlier if necessary. Reported-by: -
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Remove the disk, partition and bdi sysfs attributes before cleaning up the request queue associated with the disk. Signed-off-by:
-
Bart Van Assche authored
Remove the disk, partition and bdi sysfs attributes before cleaning up the request queue associated with the disk. Signed-off-by:
-
Bart Van Assche authored
Remove the disk, partition and bdi sysfs attributes before cleaning up the request queue associated with the disk. Signed-off-by:
-
Jens Axboe authored
Similarly to the support we have for testing/faking timeouts for null_blk, this adds support for triggering a requeue condition. Considering the issues around restart we've been seeing, this should be a useful addition to the testing arsenal to ensure that we are handling requeue conditions correctly. This works for queue mode 1 (legacy request_fn based path) and 2 (blk-mq path), as there's no good way to do requeue with a bio based driver. This is similar to the timeout path. For the blk-mq path, we alternate between passing back BLK_STS_RESOURCE and manually calling blk_mq_requeue_request() in the driver. The former will hit the core requeue path, while the latter exercises the IO scheduler requeue path. Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Omar Sandoval authored
sbitmap_queue_get()/sbitmap_queue_clear() are used for allocating/freeing a resource, so they should provide acquire/release barrier semantics, respectively. sbitmap_get() currently contains a full barrier, which is unnecessary, so use test_and_set_bit_lock() instead of test_and_set_bit() (these are equivalent on x86_64). sbitmap_clear_bit() does not imply any barriers, which is incorrect, as accesses of the resource (e.g., request) could potentially get reordered to after the clear_bit(). Introduce sbitmap_clear_bit_unlock() and use it for sbitmap_queue_clear() (this only adds a compiler barrier on x86_64). The other existing user of sbitmap_clear_bit() (the blk-mq software queue pending map) is serialized through a spinlock and does not need this. Reported-by:
Tejun Heo <tj@kernel.org> Acked-by:
-
Omar Sandoval authored
When we insert a request, we set the software queue pending bit while holding the software queue lock. However, we clear it outside of the lock, so it's possible that a concurrent insert could reset the bit after we clear it but before we empty the request list. Afterwards, the bit would still be set but the software queue wouldn't have any requests in it, leading us to do a spurious run in the future. This is mostly a benign/theoretical issue, but it makes the following change easier to justify. Signed-off-by:
-
Bart Van Assche authored
When debugging the ZBC code in the mq-deadline scheduler it is very important to know which zones are locked and which zones are not locked. Hence this patch that exports the zone locking information through debugfs. Cc: Omar Sandoval <osandov@fb.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Tested-by:
-
Bart Van Assche authored
Make sure that the queue show and store methods are contiguous and also that these appear in alphabetical order. Signed-off-by:
-
Jiufei Xue authored
Signed-off-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Acked-by:
-
Anshuman Khandual authored
This replaces scatterlist->page_link LSB encodings with SG_CHAIN and SG_END definitions without any functional change. Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Keith for 4.16-rc. * 'for-jens' of git://git.infradead.org/nvme: nvmet: fix PSDT field check in command format nvme-multipath: fix sysfs dangerously created links nvme-pci: Fix nvme queue cleanup if IRQ setup fails nvmet-loop: use blk_rq_payload_bytes for sgl selection nvme-rdma: use blk_rq_payload_bytes instead of blk_rq_bytes nvme-fabrics: don't check for non-NULL module in nvmf_register_transport
-
Max Gurtovoy authored
PSDT field section according to NVM_Express-1.3: "This field specifies whether PRPs or SGLs are used for any data transfer associated with the command. PRPs shall be used for all Admin commands for NVMe over PCIe. SGLs shall be used for all Admin and I/O commands for NVMe over Fabrics. This field shall be set to 01b for NVMe over Fabrics 1.0 implementations. Suggested-by:
Idan Burstein <idanb@mellanox.com> Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Keith Busch <keith.busch@intel.com>
-
Baegjae Sung authored
If multipathing is enabled, each NVMe subsystem creates a head namespace (e.g., nvme0n1) and multiple private namespaces (e.g., nvme0c0n1 and nvme0c1n1) in sysfs. When creating links for private namespaces, links of head namespace are used, so the namespace creation order must be followed (e.g., nvme0n1 -> nvme0c1n1). If the order is not followed, links of sysfs will be incomplete or kernel panic will occur. The kernel panic was: kernel BUG at fs/sysfs/symlink.c:27! Call Trace: nvme_mpath_add_disk_links+0x5d/0x80 [nvme_core] nvme_validate_ns+0x5c2/0x850 [nvme_core] nvme_scan_work+0x1af/0x2d0 [nvme_core] Correct order Context A Context B nvme0n1 nvme0c0n1 nvme0c1n1 Incorrect order Context A Context B nvme0c1n1 nvme0n1 nvme0c0n1 The nvme_mpath_add_disk (for creating head namespace) is called just before the nvme_mpath_add_disk_links (for creating private namespaces). In nvme_mpath_add_disk, the first context acquires the lock of subsystem and creates a head namespace, and other contexts do nothing by checking GENHD_FL_UP of a head namespace after waiting to acquire the lock. We verified the code with or without multipathing using three vendors of dual-port NVMe SSDs. Signed-off-by:Baegjae Sung <baegjae@gmail.com> Reviewed-by:
-
- 27 Feb, 2018 3 commits
-
-
Gustavo A. R. Silva authored
It seems that the proper value to return in this particular case is the one contained into variable new_index instead of ret. Addresses-Coverity-ID: 1465148 ("Copy-paste error") Fixes: e46c7287 ("nbd: add a basic netlink interface") Reviewed-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Tang Junhui authored
Kernel crashed when run fio in a RAID5 backend bcache device, the call trace is bellow: [ 440.012034] kernel BUG at block/blk-ioc.c:146! [ 440.012696] invalid opcode: 0000 [#1] SMP NOPTI [ 440.026537] CPU: 2 PID: 2205 Comm: md127_raid5 Not tainted 4.15.0 #8 [ 440.027441] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 07/16 /2015 [ 440.028615] RIP: 0010:put_io_context+0x8b/0x90 [ 440.029246] RSP: 0018:ffffa8c882b43af8 EFLAGS: 00010246 [ 440.029990] RAX: 0000000000000000 RBX: ffffa8c88294fca0 RCX: 0000000000 0f4240 [ 440.031006] RDX: 0000000000000004 RSI: 0000000000000286 RDI: ffffa8c882 94fca0 [ 440.032030] RBP: ffffa8c882b43b10 R08: 0000000000000003 R09: ffff949cb8 0c1700 [ 440.033206] R10: 0000000000000104 R11: 000000000000b71c R12: 00000000000 01000 [ 440.034222] R13: 0000000000000000 R14: ffff949cad84db70 R15: ffff949cb11 bd1e0 [ 440.035239] FS: 0000000000000000(0000) GS:ffff949cba280000(0000) knlGS: 0000000000000000 [ 440.060190] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 440.084967] CR2: 00007ff0493ef000 CR3: 00000002f1e0a002 CR4: 00000000001 606e0 [ 440.110498] Call Trace: [ 440.135443] bio_disassociate_task+0x1b/0x60 [ 440.160355] bio_free+0x1b/0x60 [ 440.184666] bio_put+0x23/0x30 [ 440.208272] search_free+0x23/0x40 [bcache] [ 440.231448] cached_dev_write_complete+0x31/0x70 [bcache] [ 440.254468] closure_put+0xb6/0xd0 [bcache] [ 440.277087] request_endio+0x30/0x40 [bcache] [ 440.298703] bio_endio+0xa1/0x120 [ 440.319644] handle_stripe+0x418/0x2270 [raid456] [ 440.340614] ? load_balance+0x17b/0x9c0 [ 440.360506] handle_active_stripes.isra.58+0x387/0x5a0 [raid456] [ 440.380675] ? __release_stripe+0x15/0x20 [raid456] [ 440.400132] raid5d+0x3ed/0x5d0 [raid456] [ 440.419193] ? schedule+0x36/0x80 [ 440.437932] ? schedule_timeout+0x1d2/0x2f0 [ 440.456136] md_thread+0x122/0x150 [ 440.473687] ? wait_woken+0x80/0x80 [ 440.491411] kthread+0x102/0x140 [ 440.508636] ? find_pers+0x70/0x70 [ 440.524927] ? kthread_associate_blkcg+0xa0/0xa0 [ 440.541791] ret_from_fork+0x35/0x40 [ 440.558020] Code: c2 48 00 5b 41 5c 41 5d 5d c3 48 89 c6 4c 89 e7 e8 bb c2 48 00 48 8b 3d bc 36 4b 01 48 89 de e8 7c f7 e0 ff 5b 41 5c 41 5d 5d c3 <0f> 0b 0f 1f 00 0f 1f 44 00 00 55 48 8d 47 b8 48 89 e5 41 57 41 [ 440.610020] RIP: put_io_context+0x8b/0x90 RSP: ffffa8c882b43af8 [ 440.628575] ---[ end trace a1fd79d85643a73e ]-- All the crash issue happened when a bypass IO coming, in such scenario s->iop.bio is pointed to the s->orig_bio. In search_free(), it finishes the s->orig_bio by calling bio_complete(), and after that, s->iop.bio became invalid, then kernel would crash when calling bio_put(). Maybe its upper layer's faulty, since bio should not be freed before we calling bio_put(), but we'd better calling bio_put() first before calling bio_complete() to notify upper layer ending this bio. This patch moves bio_complete() under bio_put() to avoid kernel crash. [mlyle: fixed commit subject for character limits] Reported-by:
Matthias Ferdinand <bcache@mfedv.net> Tested-by:
Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by:
-
Coly Li authored
Commit 2831231d ("bcache: reduce cache_set devices iteration by devices_max_used") adds c->devices_max_used to reduce iteration of c->uuids elements, this value is updated in bcache_device_attach(). But for flash only volume, when calling flash_devs_run(), the function bcache_device_attach() is not called yet and c->devices_max_used is not updated. The unexpected result is, the flash only volume won't be run by flash_devs_run(). This patch fixes the issue by iterate all c->uuids elements in flash_devs_run(). c->devices_max_used will be updated properly when bcache_device_attach() gets called. [mlyle: commit subject edited for character limit] Fixes: 2831231d ("bcache: reduce cache_set devices iteration by devices_max_used") Reported-by:
Coly Li <colyli@suse.de> Reviewed-by:
-
- 26 Feb, 2018 5 commits
-
-
Eric Biggers authored
'struct blk_user_trace_setup' is passed to BLKTRACESETUP, not BLKTRACESTART. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Jan Kara authored
When blkdev_open() races with device removal and creation it can happen that unhashed bdev inode gets associated with newly created gendisk like: CPU0 CPU1 blkdev_open() bdev = bd_acquire() del_gendisk() bdev_unhash_inode(bdev); remove device create new device with the same number __blkdev_get() disk = get_gendisk() - gets reference to gendisk of the new device Now another blkdev_open() will not find original 'bdev' as it got unhashed, create a new one and associate it with the same 'disk' at which point problems start as we have two independent page caches for one device. Fix the problem by verifying that the bdev inode didn't get unhashed before we acquired gendisk reference. That way we make sure gendisk can get associated only with visible bdev inodes. Tested-by:Hou Tao <houtao1@huawei.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
When two blkdev_open() calls for a partition race with device removal and recreation, we can hit BUG_ON(!bd_may_claim(bdev, whole, holder)) in blkdev_open(). The race can happen as follows: CPU0 CPU1 CPU2 del_gendisk() bdev_unhash_inode(part1); blkdev_open(part1, O_EXCL) blkdev_open(part1, O_EXCL) bdev = bd_acquire() bdev = bd_acquire() blkdev_get(bdev) bd_start_claiming(bdev) - finds old inode 'whole' bd_prepare_to_claim() -> 0 bdev_unhash_inode(whole); <device removed> <new device under same number created> blkdev_get(bdev); bd_start_claiming(bdev) - finds new inode 'whole' bd_prepare_to_claim() - this also succeeds as we have different 'whole' here... - bad things happen now as we have two exclusive openers of the same bdev The problem here is that block device opens can see various intermediate states while gendisk is shutting down and then being recreated. We fix the problem by introducing new lookup_sem in gendisk that synchronizes gendisk deletion with get_gendisk() and furthermore by making sure that get_gendisk() does not return gendisk that is being (or has been) deleted. This makes sure that once we ever manage to look up newly created bdev inode, we are also guaranteed that following get_gendisk() will either return failure (and we fail open) or it returns gendisk for the new device and following bdget_disk() will return new bdev inode (i.e., blkdev_open() follows the path as if it is completely run after new device is created). Reported-and-analyzed-by: -
Jan Kara authored
When two blkdev_open() calls race with device removal and recreation, __blkdev_get() can use looked up gendisk after it is freed: CPU0 CPU1 CPU2 del_gendisk(disk); bdev_unhash_inode(inode); blkdev_open() blkdev_open() bdev = bd_acquire(inode); - creates and returns new inode bdev = bd_acquire(inode); - returns the same inode __blkdev_get(devt) __blkdev_get(devt) disk = get_gendisk(devt); - got structure of device going away <finish device removal> <new device gets created under the same device number> disk = get_gendisk(devt); - got new device structure if (!bdev->bd_openers) { does the first open } if (!bdev->bd_openers) - false } else { put_disk_and_module(disk) - remember this was old device - this was last ref and disk is now freed } disk_unblock_events(disk); -> oops Fix the problem by making sure we drop reference to disk in __blkdev_get() only after we are really done with it. Reported-by: -
Jan Kara authored
Add a proper counterpart to get_disk_and_module() - put_disk_and_module(). Currently it is opencoded in several places. Signed-off-by:
-
