- 20 May, 2020 29 commits
-
-
Kai-Heng Feng authored
[ Upstream commit 52e4e368 ] Commit 317d9313 ("ALSA: hda/realtek - Set default power save node to 0") makes the ALC225 have pop noise on S3 resume and cold boot. The previous fix enable power save node universally for ALC225, however it makes some ALC225 systems unable to produce any sound. So let's only enable power save node for the affected Dell Wyse platform. Fixes: 317d9313 ("ALSA: hda/realtek - Set default power save node to 0") BugLink: https://bugs.launchpad.net/bugs/1866357Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200503152449.22761-2-kai.heng.feng@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vasily Averin authored
[ Upstream commit 5e698222 ] Commit 89163f93 ("ipc/util.c: sysvipc_find_ipc() should increase position index") is causing this bug (seen on 5.6.8): # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages # ipcmk -Q Message queue id: 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 # ipcmk -Q Message queue id: 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcrm -q 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 2 # ipcrm -q 2 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 3 # ipcrm -q 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 Whenever an IPC item with a low id is deleted, the items with higher ids are duplicated, as if filling a hole. new_pos should jump through hole of unused ids, pos can be updated inside "for" cycle. Fixes: 89163f93 ("ipc/util.c: sysvipc_find_ipc() should increase position index") Reported-by:
Andreas Schwab <schwab@suse.de> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Waiman Long <longman@redhat.com> Cc: NeilBrown <neilb@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/4921fe9b-9385-a2b4-1dc4-1099be6d2e39@virtuozzo.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 5b5703db ] v2: removed TODO reminder Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Kai Vehmanen authored
[ Upstream commit ca76282b ] A race exists between build_pcms() and build_controls() phases of codec setup. Build_pcms() sets up notifier for jack events. If a monitor event is received before build_controls() is run, the initial jack state is lost and never reported via mixer controls. The problem can be hit at least with SOF as the controller driver. SOF calls snd_hda_codec_build_controls() in its workqueue-based probe and this can be delayed enough to hit the race condition. Fix the issue by invalidating the per-pin ELD information when build_controls() is called. The existing call to hdmi_present_sense() will update the ELD contents. This ensures initial monitor state is correctly reflected via mixer controls. BugLink: https://github.com/thesofproject/linux/issues/1687Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Chris Wilson authored
[ Upstream commit 8c539776 ] Make a note of the first time we discover the turbo mode has been disabled by the BIOS, as otherwise we complain every time we try to update the mode. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit 0c894463 ] When a channel configuration fails, the status of the channel is set to DEV_ERROR so that an attempt to submit it fails. However, this status sticks until the heat end of the universe, making it impossible to recover from the error. Let's reset it when the channel is released so that further use of the channel with correct configuration is not impacted. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200419164912.670973-5-lkundrak@v3.skSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Madhuparna Bhowmik authored
[ Upstream commit 2e45676a ] pd->dma.dev is read in irq handler pd_irq(). However, it is set to pdev->dev after request_irq(). Therefore, set pd->dma.dev to pdev->dev before request_irq() to avoid data race between pch_dma_probe() and pd_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200416062335.29223-1-madhuparnabhowmik10@gmail.comSigned-off-by:
-
Ilie Halip authored
[ Upstream commit 3c1918c8 ] When building with the LLVM linker this error occurrs: LD arch/riscv/kernel/vdso/vdso-syms.o ld.lld: error: no input files This happens because the lld treats -R as an alias to -rpath, as opposed to ld where -R means --just-symbols. Use the long option name for compatibility between the two. Link: https://github.com/ClangBuiltLinux/linux/issues/805Reported-by:
Dmitry Golovin <dima@golovin.in> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Ilie Halip <ilie.halip@gmail.com> Reviewed-by:
Fangrui Song <maskray@google.com> Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 24adbc16 ] We autotune rcvbuf whenever SO_RCVLOWAT is set to account for 100% overhead in tcp_set_rcvlowat() This works well when skb->len/skb->truesize ratio is bigger than 0.5 But if we receive packets with small MSS, we can end up in a situation where not enough bytes are available in the receive queue to satisfy RCVLOWAT setting. As our sk_rcvbuf limit is hit, we send zero windows in ACK packets, preventing remote peer from sending more data. Even autotuning does not help, because it only triggers at the time user process drains the queue. If no EPOLLIN is generated, this can not happen. Note poll() has a similar issue, after commit c7004482 ("tcp: Respect SO_RCVLOWAT in tcp_poll().") Fixes: 03f45c88 ("tcp: avoid extra wakeups for SO_RCVLOWAT users") Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kelly Littlepage authored
[ Upstream commit cc4de047 ] The stated intent of the original commit is to is to "return the timestamp corresponding to the highest sequence number data returned." The current implementation returns the timestamp for the last byte of the last fully read skb, which is not necessarily the last byte in the recv buffer. This patch converts behavior to the original definition, and to the behavior of the previous draft versions of commit 98aaa913 ("tcp: Extend SOF_TIMESTAMPING_RX_SOFTWARE to TCP recvmsg") which also match this behavior. Fixes: 98aaa913 ("tcp: Extend SOF_TIMESTAMPING_RX_SOFTWARE to TCP recvmsg") Co-developed-by:
Iris Liu <iris@onechronos.com> Signed-off-by:
Kelly Littlepage <kelly@onechronos.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Zefan Li authored
[ Upstream commit 090e28b2 ] If systemd is configured to use hybrid mode which enables the use of both cgroup v1 and v2, systemd will create new cgroup on both the default root (v2) and netprio_cgroup hierarchy (v1) for a new session and attach task to the two cgroups. If the task does some network thing then the v2 cgroup can never be freed after the session exited. One of our machines ran into OOM due to this memory leak. In the scenario described above when sk_alloc() is called cgroup_sk_alloc() thought it's in v2 mode, so it stores the cgroup pointer in sk->sk_cgrp_data and increments the cgroup refcnt, but then sock_update_netprioidx() thought it's in v1 mode, so it stores netprioidx value in sk->sk_cgrp_data, so the cgroup refcnt will never be freed. Currently we do the mode switch when someone writes to the ifpriomap cgroup control file. The easiest fix is to also do the switch when a task is attached to a new cgroup. Fixes: bd1060a1 ("sock, cgroup: add sock->sk_cgroup") Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Tested-by:
Zefan Li <lizefan@huawei.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 57644431 ] In commit b406472b ("net: ipv4: avoid mixed n_redirects and rate_tokens usage") I missed the fact that a 0 'rate_tokens' will bypass the backoff algorithm. Since rate_tokens is cleared after a redirect silence, and never incremented on redirects, if the host keeps receiving packets requiring redirect it will reply ignoring the backoff. Additionally, the 'rate_last' field will be updated with the cadence of the ingress packet requiring redirect. If that rate is high enough, that will prevent the host from generating any other kind of ICMP messages The check for a zero 'rate_tokens' value was likely a shortcut to avoid the more complex backoff algorithm after a redirect silence period. Address the issue checking for 'n_redirects' instead, which is incremented on successful redirect, and does not interfere with other ICMP replies. Fixes: b406472b ("net: ipv4: avoid mixed n_redirects and rate_tokens usage") Reported-and-tested-by:
Colin Walters <walters@redhat.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 3047211c ] There is a soft dependency against dsa_loop_bdinfo.ko which sets up the MDIO device registration, since there are no symbols referenced by dsa_loop.ko, there is no automatic loading of dsa_loop_bdinfo.ko which is needed. Fixes: 98cd1552 ("net: dsa: Mock-up driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Luo bin authored
[ Upstream commit e8a1b0ef ] if some function in ndo_stop interface returns failure because of hardware fault, must go on excuting rest steps rather than return failure directly, otherwise will cause memory leak.And bump the timeout for SET_FUNC_STATE to ensure that cmd won't return failure when hw is busy. Otherwise hw may stomp host memory if we free memory regardless of the return value of SET_FUNC_STATE. Fixes: 51ba902a ("net-next/hinic: Initialize hw interface") Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit 01c32598 ] When we fill up a receive VQ, try_fill_recv currently tries to count kicks using a 64 bit stats counter. Turns out, on a 32 bit kernel that uses a seqcount. sequence counts are "lock" constructs where you need to make sure that writers are serialized. In turn, this means that we mustn't run two try_fill_recv concurrently. Which of course we don't. We do run try_fill_recv sometimes from a softirq napi context, and sometimes from a fully preemptible context, but the later always runs with napi disabled. However, when it comes to the seqcount, lockdep is trying to enforce the rule that the same lock isn't accessed from preemptible and softirq context - it doesn't know about napi being enabled/disabled. This causes a false-positive warning: WARNING: inconsistent lock state ... inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. As a work around, shut down the warning by switching to u64_stats_update_begin_irqsave - that works by disabling interrupts on 32 bit only, is a NOP on 64 bit. Reported-by:
Thomas Gleixner <tglx@linutronix.de> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e776af60 ] If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE operation we want to return -EINVAL error. But depending on zc->recv_skip_hint content, we might return -EIO error if the socket has SOCK_DONE set. Make sure to return -EINVAL in this case. BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131 __sys_getsockopt+0x533/0x7b0 net/socket.c:2177 __do_sys_getsockopt net/socket.c:2192 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:2189 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2189 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c829 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829 RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009 RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4 Local variable ----zc@do_tcp_getsockopt created at: do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 Fixes: 05255b82 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
-
Maciej Żenczykowski authored
[ Upstream commit 09454fd0 ] This reverts commit 19bda36c: | ipv6: add mtu lock check in __ip6_rt_update_pmtu | | Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu. | It leaded to that mtu lock doesn't really work when receiving the pkt | of ICMPV6_PKT_TOOBIG. | | This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4 | did in __ip_rt_update_pmtu. The above reasoning is incorrect. IPv6 *requires* icmp based pmtu to work. There's already a comment to this effect elsewhere in the kernel: $ git grep -p -B1 -A3 'RTAX_MTU lock' net/ipv6/route.c=4813= static int rt6_mtu_change_route(struct fib6_info *f6i, void *p_arg) ... /* In IPv6 pmtu discovery is not optional, so that RTAX_MTU lock cannot disable it. We still use this lock to block changes caused by addrconf/ndisc. */ This reverts to the pre-4.9 behaviour. Cc: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Fixes: 19bda36c ("ipv6: add mtu lock check in __ip6_rt_update_pmtu") Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit b8c15839 ] We don't want to disconnect a session because of a stray PADT arriving while the interface is in promiscuous mode. Furthermore, multicast and broadcast packets make no sense here, so only PACKET_HOST is accepted. Reported-by:
David Balažic <xerces9@gmail.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 9de5d235 ] phy_restart_aneg() enables aneg in the PHY. That's not what we want if phydev->autoneg is disabled. In this case still update EEE advertisement register, but don't enable aneg and don't trigger an aneg restart. Fixes: f75abeb8 ("net: phy: restart phy autonegotiation after EEE advertisment change") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit eead1c2e ] The cipso and calipso code can set the MLS_CAT attribute on successful parsing, even if the corresponding catmap has not been allocated, as per current configuration and external input. Later, selinux code tries to access the catmap if the MLS_CAT flag is present via netlbl_catmap_getlong(). That may cause null ptr dereference while processing incoming network traffic. Address the issue setting the MLS_CAT flag only if the catmap is really allocated. Additionally let netlbl_catmap_getlong() cope with NULL catmap. Reported-by:
Matthew Sheets <matthew.sheets@gd-ms.com> Fixes: 4b8feff2 ("netlabel: fix the horribly broken catmap functions") Fixes: ceba1832 ("calipso: Set the calipso socket label to match the secattr.") Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit dd912306 ] syzbot managed to trigger a recursive NETDEV_FEAT_CHANGE event between bonding master and slave. I managed to find a reproducer for this: ip li set bond0 up ifenslave bond0 eth0 brctl addbr br0 ethtool -K eth0 lro off brctl addif br0 bond0 ip li set br0 up When a NETDEV_FEAT_CHANGE event is triggered on a bonding slave, it captures this and calls bond_compute_features() to fixup its master's and other slaves' features. However, when syncing with its lower devices by netdev_sync_lower_features() this event is triggered again on slaves when the LRO feature fails to change, so it goes back and forth recursively until the kernel stack is exhausted. Commit 17b85d29 intentionally lets __netdev_update_features() return -1 for such a failure case, so we have to just rely on the existing check inside netdev_sync_lower_features() and skip NETDEV_FEAT_CHANGE event only for this specific failure case. Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack") Reported-by: syzbot+e73ceacfd8560cc8a3ca@syzkaller.appspotmail.com Reported-by: syzbot+c2fb6f9ddcea95ba49b5@syzkaller.appspotmail.com Cc: Jarod Wilson <jarod@redhat.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jann Horn <jannh@google.com> Reviewed-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Raul E Rangel authored
[ Upstream commit 45a3fe3b ] The AMD eMMC 5.0 controller does not support 64 bit DMA. Fixes: 34597a3f ("mmc: sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400") Signed-off-by:
Raul E Rangel <rrangel@chromium.org> Link: https://marc.info/?l=linux-mmc&m=158879884514552&w=2Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200508165344.1.Id5bb8b1ae7ea576f26f9d91c761df7ccffbf58c5@changeidSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Wu Bo authored
commit 83c6f239 upstream. If the __copy_from_user function failed we need to call sg_remove_request in sg_write. Link: https://lore.kernel.org/r/610618d9-e983-fd56-ed0f-639428343af7@huawei.comAcked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Wu Bo <wubo40@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Stefan Hajnoczi authored
[ Upstream commit 90b5feb8 ] A userspace process holding a file descriptor to a virtio_blk device can still invoke block_device_operations after hot unplug. This leads to a use-after-free accessing vblk->vdev in virtblk_getgeo() when ioctl(HDIO_GETGEO) is invoked: BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 IP: [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio] PGD 800000003a92f067 PUD 3a930067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 1310 Comm: hdio-getgeo Tainted: G OE ------------ 3.10.0-1062.el7.x86_64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 task: ffff9be5fbfb8000 ti: ffff9be5fa890000 task.ti: ffff9be5fa890000 RIP: 0010:[<ffffffffc00e5450>] [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio] RSP: 0018:ffff9be5fa893dc8 EFLAGS: 00010246 RAX: ffff9be5fc3f3400 RBX: ffff9be5fa893e30 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff9be5fbc10b40 RBP: ffff9be5fa893dc8 R08: 0000000000000301 R09: 0000000000000301 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9be5fdc24680 R13: ffff9be5fbc10b40 R14: ffff9be5fbc10480 R15: 0000000000000000 FS: 00007f1bfb968740(0000) GS:ffff9be5ffc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000090 CR3: 000000003a894000 CR4: 0000000000360ff0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffc016ac37>] virtblk_getgeo+0x47/0x110 [virtio_blk] [<ffffffff8d3f200d>] ? handle_mm_fault+0x39d/0x9b0 [<ffffffff8d561265>] blkdev_ioctl+0x1f5/0xa20 [<ffffffff8d488771>] block_ioctl+0x41/0x50 [<ffffffff8d45d9e0>] do_vfs_ioctl+0x3a0/0x5a0 [<ffffffff8d45dc81>] SyS_ioctl+0xa1/0xc0 A related problem is that virtblk_remove() leaks the vd_index_ida index when something still holds a reference to vblk->disk during hot unplug. This causes virtio-blk device names to be lost (vda, vdb, etc). Fix these issues by protecting vblk->vdev with a mutex and reference counting vblk so the vd_index_ida index can be removed in all cases. Fixes: 48e4043d ("virtio: add virtio disk geometry feature") Reported-by:
Lance Digby <ldigby@redhat.com> Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Link: https://lore.kernel.org/r/20200430140442.171016-1-stefanha@redhat.comSigned-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit dc30b405 ] The current gcc-10 snapshot produces a false-positive warning: net/core/drop_monitor.c: In function 'trace_drop_common.constprop': cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=] In file included from net/core/drop_monitor.c:23: include/uapi/linux/net_dropmon.h:36:8: note: at offset 0 to object 'entries' with size 4 declared here 36 | __u32 entries; | ^~~~~~~ I reported this in the gcc bugzilla, but in case it does not get fixed in the release, work around it by using a temporary variable. Fixes: 9a8afc8d ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94881Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit ee8d2267 ] Should an irq requested with 'devm_request_irq' be released explicitly, it should be done by 'devm_free_irq()', not 'free_irq()'. Fixes: 6c821bd9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 10e3cc18 ] A call to 'dma_alloc_coherent()' is hidden in 'sonic_alloc_descriptors()', called from 'sonic_probe1()'. This is correctly freed in the remove function, but not in the error handling path of the probe function. Fix it and add the missing 'dma_free_coherent()' call. While at it, rename a label in order to be slightly more informative. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Signed-off-by:
-
Hugh Dickins authored
[ Upstream commit ea0dfeb4 ] Recent commit 71725ed1 ("mm: huge tmpfs: try to split_huge_page() when punching hole") has allowed syzkaller to probe deeper, uncovering a long-standing lockdep issue between the irq-unsafe shmlock_user_lock, the irq-safe xa_lock on mapping->i_pages, and shmem inode's info->lock which nests inside xa_lock (or tree_lock) since 4.8's shmem_uncharge(). user_shm_lock(), servicing SysV shmctl(SHM_LOCK), wants shmlock_user_lock while its caller shmem_lock() holds info->lock with interrupts disabled; but hugetlbfs_file_setup() calls user_shm_lock() with interrupts enabled, and might be interrupted by a writeback endio wanting xa_lock on i_pages. This may not risk an actual deadlock, since shmem inodes do not take part in writeback accounting, but there are several easy ways to avoid it. Requiring interrupts disabled for shmlock_user_lock would be easy, but it's a high-level global lock for which that seems inappropriate. Instead, recall that the use of info->lock to guard info->flags in shmem_lock() dates from pre-3.1 days, when races with SHMEM_PAGEIN and SHMEM_TRUNCATE could occur: nowadays it serves no purpose, the only flag added or removed is VM_LOCKED itself, and calls to shmem_lock() an inode are already serialized by the caller. Take info->lock out of the chain and the possibility of deadlock or lockdep warning goes away. Fixes: 4595ef88 ("shmem: make shmem_inode_info::lock irq-safe") Reported-by: syzbot+c8a8197c8852f566b9d9@syzkaller.appspotmail.com Reported-by: syzbot+40b71e145e73f78f81ad@syzkaller.appspotmail.com Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2004161707410.16322@eggly.anvils Link: https://lore.kernel.org/lkml/000000000000e5838c05a3152f53@google.com/ Link: https://lore.kernel.org/lkml/0000000000003712b305a331d3b1@google.com/Signed-off-by:
-
Florian Fainelli authored
commit 86f8b1c0 upstream. Prior to 1d27732f ("net: dsa: setup and teardown ports"), we would not treat failures to set-up an user port as fatal, but after this commit we would, which is a regression for some systems where interfaces may be declared in the Device Tree, but the underlying hardware may not be present (pluggable daughter cards for instance). Fixes: 1d27732f ("net: dsa: setup and teardown ports") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 14 May, 2020 11 commits
-
-
Greg Kroah-Hartman authored
-
Oleg Nesterov authored
[ Upstream commit b5f20061 ] Commit cc731525 ("signal: Remove kernel interal si_code magic") changed the value of SI_FROMUSER(SI_MESGQ), this means that mq_notify() no longer works if the sender doesn't have rights to send a signal. Change __do_notify() to use do_send_sig_info() instead of kill_pid_info() to avoid check_kill_permission(). This needs the additional notify.sigev_signo != 0 check, shouldn't we change do_mq_notify() to deny sigev_signo == 0 ? Test-case: #include <signal.h> #include <mqueue.h> #include <unistd.h> #include <sys/wait.h> #include <assert.h> static int notified; static void sigh(int sig) { notified = 1; } int main(void) { signal(SIGIO, sigh); int fd = mq_open("/mq", O_RDWR|O_CREAT, 0666, NULL); assert(fd >= 0); struct sigevent se = { .sigev_notify = SIGEV_SIGNAL, .sigev_signo = SIGIO, }; assert(mq_notify(fd, &se) == 0); if (!fork()) { assert(setuid(1) == 0); mq_send(fd, "",1,0); return 0; } wait(NULL); mq_unlink("/mq"); assert(notified); return 0; } [manfred@colorfullife.com: 1) Add self_exec_id evaluation so that the implementation matches do_notify_parent 2) use PIDTYPE_TGID everywhere] Fixes: cc731525 ("signal: Remove kernel interal si_code magic") Reported-by:
Yoji <yoji.fujihar.min@gmail.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: <1vier1@web.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/e2a782e4-eab9-4f5c-c749-c07a8f7a4e66@colorfullife.comSigned-off-by:
-
Ivan Delalande authored
commit e08df079 upstream. If the trapping instruction contains a ':', for a memory access through segment registers for example, the sed substitution will insert the '*' marker in the middle of the instruction instead of the line address: 2b: 65 48 0f c7 0f cmpxchg16b %gs:*(%rdi) <-- trapping instruction I started to think I had forgotten some quirk of the assembly syntax before noticing that it was actually coming from the script. Fix it to add the address marker at the right place for these instructions: 28: 49 8b 06 mov (%r14),%rax 2b:* 65 48 0f c7 0f cmpxchg16b %gs:(%rdi) <-- trapping instruction 30: 0f 94 c0 sete %al Fixes: 18ff44b1 ("scripts/decodecode: make faulting insn ptr more robust") Signed-off-by:
Ivan Delalande <colona@arista.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20200419223653.GA31248@visorSigned-off-by:
-
Josh Poimboeuf authored
commit d8dd25a4 upstream. When the current frame address (CFA) is stored on the stack (i.e., cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack offset when there are subsequent pushes or pops. This results in bad ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the previous stack pointer on the stack and does a subsequent push. This fixes the following unwinder warning: WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0 Fixes: 627fce14 ("objtool: Add ORC unwind table generation") Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Reported-by:
Dave Jones <dsj@fb.com> Reported-by:
Steven Rostedt <rostedt@goodmis.org> Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Reported-by:
Joe Mario <jmario@redhat.com> Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.comSigned-off-by:
-
Arnd Bergmann authored
commit c165d57b upstream. gcc-10 points out that a code path exists where a pointer to a stack variable may be passed back to the caller: net/netfilter/nfnetlink_osf.c: In function 'nf_osf_hdr_ctx_init': cc1: warning: function may return address of local variable [-Wreturn-local-addr] net/netfilter/nfnetlink_osf.c:171:16: note: declared here 171 | struct tcphdr _tcph; | ^~~~~ I am not sure whether this can happen in practice, but moving the variable declaration into the callers avoids the problem. Fixes: 31a9c292 ("netfilter: nf_osf: add struct nf_osf_hdr_ctx") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Guillaume Nault authored
commit ea64d8d6 upstream. If the UDP header of a local VXLAN endpoint is NAT-ed, and the VXLAN device has disabled UDP checksums and enabled Tx checksum offloading, then the skb passed to udp_manip_pkt() has hdr->check == 0 (outer checksum disabled) and skb->ip_summed == CHECKSUM_PARTIAL (inner packet checksum offloaded). Because of the ->ip_summed value, udp_manip_pkt() tries to update the outer checksum with the new address and port, leading to an invalid checksum sent on the wire, as the original null checksum obviously didn't take the old address and port into account. So, we can't take ->ip_summed into account in udp_manip_pkt(), as it might not refer to the checksum we're acting on. Instead, we can base the decision to update the UDP checksum entirely on the value of hdr->check, because it's null if and only if checksum is disabled: * A fully computed checksum can't be 0, since a 0 checksum is represented by the CSUM_MANGLED_0 value instead. * A partial checksum can't be 0, since the pseudo-header always adds at least one non-zero value (the UDP protocol type 0x11) and adding more values to the sum can't make it wrap to 0 as the carry is then added to the wrapped number. * A disabled checksum uses the special value 0. The problem seems to be there from day one, although it was probably not visible before UDP tunnels were implemented. Fixes: 5b1158e9 ("[NETFILTER]: Add NAT support for nf_conntrack") Signed-off-by:
-
Josh Poimboeuf authored
commit 81b67439 upstream. The following execution path is possible: fsnotify() [ realign the stack and store previous SP in R10 ] <IRQ> [ only IRET regs saved ] common_interrupt() interrupt_entry() <NMI> [ full pt_regs saved ] ... [ unwind stack ] When the unwinder goes through the NMI and the IRQ on the stack, and then sees fsnotify(), it doesn't have access to the value of R10, because it only has the five IRET registers. So the unwind stops prematurely. However, because the interrupt_entry() code is careful not to clobber R10 before saving the full regs, the unwinder should be able to read R10 from the previously saved full pt_regs associated with the NMI. Handle this case properly. When encountering an IRET regs frame immediately after a full pt_regs frame, use the pt_regs as a backup which can be used to get the C register values. Also, note that a call frame resets the 'prev_regs' value, because a function is free to clobber the registers. For this fix to work, the IRET and full regs frames must be adjacent, with no FUNC frames in between. So replace the FUNC hint in interrupt_entry() with an IRET_REGS hint. Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder") Reviewed-by:
-
Josh Poimboeuf authored
commit a0f81bf2 upstream. If the ORC entry type is unknown, nothing else can be done other than reporting an error. Exit the function instead of breaking out of the switch statement. Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder") Reviewed-by:
-
Josh Poimboeuf authored
commit 98d0c8eb upstream. If the unwinder is called before the ORC data has been initialized, orc_find() returns NULL, and it tries to fall back to using frame pointers. This can cause some unexpected warnings during boot. Move the 'orc_init' check from orc_find() to __unwind_init(), so that it doesn't even try to unwind from an uninitialized state. Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder") Reviewed-by:
-
Miroslav Benes authored
commit f1d9a2ab upstream. When unwinding an inactive task, the ORC unwinder skips the first frame by default. If both the 'regs' and 'first_frame' parameters of unwind_start() are NULL, 'state->sp' and 'first_frame' are later initialized to the same value for an inactive task. Given there is a "less than or equal to" comparison used at the end of __unwind_start() for skipping stack frames, the first frame is skipped. Drop the equal part of the comparison and make the behavior equivalent to the frame pointer unwinder. Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder") Reviewed-by:
-
Jann Horn authored
commit f977df7b upstream. The LEAQ instruction in rewind_stack_do_exit() moves the stack pointer directly below the pt_regs at the top of the task stack before calling do_exit(). Tell the unwinder to expect pt_regs. Fixes: 8c1f7558 ("x86/entry/64: Add unwind hint annotations") Reviewed-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
