Pull SCSI fixes from James Bottomley:
 "This is four patches, consisting of one regression from the merge
  window (qla2xxx), one long-standing memory leak (sd_zbc), one event
  queue mislabelling which we want to eliminate to discourage the
  pattern (mpt3sas), and one behaviour change because re-reading the
  partition table shouldn't clear the ro flag"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Keep disk read-only when re-reading partition
  scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure
  scsi: sd_zbc: Fix potential memory leak
  scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM

geo->keylen cannot be larger than 4.  So we might as well make
fixed-size allocations.

Given the one remaining user, geo->keylen cannot even be larger than 1.
Logfs used to have 64bit and 128bit keys, tcm_qla2xxx only has 32bit
keys.  But let's not break the code if we don't have to.
Signed-off-by: Joern Engel <joern@purestorage.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull percpu_ref rcu fixes from Tejun Heo:
 "Jann Horn found that aio was depending on the internal RCU grace
  periods of percpu-ref and that it's broken because aio uses regular
  RCU while percpu_ref uses sched-RCU.

  Depending on percpu_ref's internal grace periods isn't a good idea
  because

   - The RCU type might not match.

   - percpu_ref's grace periods are used to switch to atomic mode. They
     aren't between the last put and the invocation of the last release.
     This is easy to get confused about and can lead to subtle bugs.

   - percpu_ref might not have grace periods at all depending on its
     current operation mode.

  This patchset audits and fixes percpu_ref users for their RCU usages"

[ There's a continuation of this series that clarifies percpu_ref
  documentation that the internal grace periods must not be depended
  upon, and introduces rcu_work to simplify bouncing to a workqueue
  after an RCU grace period.

  That will go in for 4.17 - this is just the minimal set with the fixes
  that are tagged for -stable ]

* 'percpu_ref-rcu-audit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc:
  RDMAVT: Fix synchronization around percpu_ref
  fs/aio: Use RCU accessors for kioctx_table->table[]
  fs/aio: Add explicit RCU grace period when freeing kioctx

This reverts commit 864b75f9.

Commit 864b75f9 ("mm/page_alloc: fix memmap_init_zone pageblock
alignment") modified the logic in memmap_init_zone() to initialize
struct pages associated with invalid PFNs, to appease a VM_BUG_ON()
in move_freepages(), which is redundant by its own admission, and
dereferences struct page fields to obtain the zone without checking
whether the struct pages in question are valid to begin with.

Commit 864b75f9 only makes it worse, since the rounding it does
may cause pfn assume the same value it had in a prior iteration of
the loop, resulting in an infinite loop and a hang very early in the
boot. Also, since it doesn't perform the same rounding on start_pfn
itself but only on intermediate values following an invalid PFN, we
may still hit the same VM_BUG_ON() as before.

So instead, let's fix this at the core, and ensure that the BUG
check doesn't dereference struct page fields of invalid pages.

Fixes: 864b75f9 ("mm/page_alloc: fix memmap_init_zone pageblock alignment")
Tested-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Cc: Daniel Vacek <neelx@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 platform drives fixes from Darren Hart:

 - DELL_SMBIOS conditionally depends on ACPI_WMI in the same way it
   depends on DCDBAS, update the Kconfig accordingly.

 - fix the dell driver init order to ensure that the driver dependencies
   are met, avoiding race conditions resulting in boot failure on
   certain systems when the drivers are built-in.

* tag 'platform-drivers-x86-v4.16-7' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: Fix dell driver init order
  platform/x86: dell-smbios: Resolve dependency error on ACPI_WMI

rvt_mregion uses percpu_ref for reference counting and RCU to protect
accesses from lkey_table.  When a rvt_mregion needs to be freed, it
first gets unregistered from lkey_table and then rvt_check_refs() is
called to wait for in-flight usages before the rvt_mregion is freed.

rvt_check_refs() seems to have a couple issues.

* It has a fast exit path which tests percpu_ref_is_zero().  However,
  a percpu_ref reading zero doesn't mean that the object can be
  released.  In fact, the ->release() callback might not even have
  started executing yet.  Proceeding with freeing can lead to
  use-after-free.

* lkey_table is RCU protected but there is no RCU grace period in the
  free path.  percpu_ref uses RCU internally but it's sched-RCU whose
  grace periods are different from regular RCU.  Also, it generally
  isn't a good idea to depend on internal behaviors like this.

To address the above issues, this patch removes the fast exit and adds
an explicit synchronize_rcu().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: linux-rdma@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>

While converting ioctx index from a list to a table, db446a08
("aio: convert the ioctx list to table lookup v3") missed tagging
kioctx_table->table[] as an array of RCU pointers and using the
appropriate RCU accessors.  This introduces a small window in the
lookup path where init and access may race.

Mark kioctx_table->table[] with __rcu and use the approriate RCU
accessors when using the field.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Fixes: db446a08 ("aio: convert the ioctx list to table lookup v3")
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org # v3.12+

While fixing refcounting, e34ecee2 ("aio: Fix a trinity splat")
incorrectly removed explicit RCU grace period before freeing kioctx.
The intention seems to be depending on the internal RCU grace periods
of percpu_ref; however, percpu_ref uses a different flavor of RCU,
sched-RCU.  This can lead to kioctx being freed while RCU read
protected dereferences are still in progress.

Fix it by updating free_ioctx() to go through call_rcu() explicitly.

v2: Comment added to explain double bouncing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Fixes: e34ecee2 ("aio: Fix a trinity splat")
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org # v3.13+

Update the initcall ordering to satisfy the following dependency
ordering:

1. DCDBAS, ACPI_WMI
2. DELL_SMBIOS, DELL_RBTN
3. DELL_LAPTOP, DELL_WMI

By assigning them to the following initcall levels:

subsys_initcall: DCDBAS, ACPI_WMI
module_init: DELL_SMBIOS, DELL_RBTN
late_initcall: DELL_LAPTOP, DELL_WMI

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Similarly to DCDBAS for DELL_SMBIOS_SMM, if DELL_SMBIOS_WMI is enabled,
DELL_SMBIOS becomes dependent on ACPI_WMI. Update the depends lines to
prevent a configuration where DELL_SMBIOS=y and either backend
dependency =m. Update the comment accordingly.

Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Pull USB fixes from Greg KH:
 "Here are a small clump of USB fixes for 4.16-rc6.

  Nothing major, just a number of fixes in lots of different drivers, as
  well as a PHY driver fix that snuck into this tree. Full details are
  in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  usb: musb: Fix external abort in musb_remove on omap2430
  phy: qcom-ufs: add MODULE_LICENSE tag
  usb: typec: tcpm: fusb302: Do not log an error on -EPROBE_DEFER
  USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
  usbip: vudc: fix null pointer dereference on udc->lock
  xhci: Fix front USB ports on ASUS PRIME B350M-A
  usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
  usb: usbmon: Read text within supplied buffer size
  usb: host: xhci-rcar: add support for r8a77965
  USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h
  usb: xhci: dbc: Fix lockdep warning
  xhci: fix endpoint context tracer output
  Revert "typec: tcpm: Only request matching pdos"
  usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
  usb: quirks: add control message delay for 1b1c:1b20
  uas: fix comparison for error code
  usb: gadget: udc: renesas_usb3: add binging for r8a77965
  usb: renesas_usbhs: add binding for r8a77965
  usb: dwc2: fix STM32F7 USB OTG HS compatible
  dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding
  ...

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty core and serial driver fixes for 4.16-rc6.

  They resolve some newly reported bugs, as well as some very old ones,
  which is always nice to see. There is also a new device id added in
  here for good measure.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: imx: fix bogus dev_err
  serial: sh-sci: prevent lockup on full TTY buffers
  serial: 8250_pci: Add Brainboxes UC-260 4 port serial device
  earlycon: add reg-offset to physical address before mapping
  serial: core: mark port as initialized in autoconfig
  serial: 8250_pci: Don't fail on multiport card class
  tty/serial: atmel: add new version check for usart
  tty: make n_tty_read() always abort if hangup is in progress

Pull staging fixes from Greg KH:
 "Here are three staging driver fixes for 4.16-rc6

  Two of them are lockdep fixes for the ashmem driver that have been
  reported by a number of people recently. The last one is a fix for the
  comedi driver core.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ashmem: Fix possible deadlock in ashmem_ioctl
  staging: comedi: fix comedi_nsamples_left.
  staging: android: ashmem: Fix lockdep issue during llseek

Pull auxdisplay fixes from Miguel Ojeda:
 "Silence a few warnings in auxdisplay.

   - a couple of uninitialized warnings reported by the build service

   - a doc comment warning under W=1

   - three fall-through comments not recognized under W=1"

* tag 'auxdisplay-for-linus-v4.16-rc6' of git://github.com/ojeda/linux:
  auxdisplay: img-ascii-lcd: Silence 2 uninitialized warnings
  auxdisplay: img-ascii-lcd: Fix doc comment to silence warnings
  auxdisplay: panel: Change comments to silence fallthrough warnings

The warnings are:

  drivers/auxdisplay/img-ascii-lcd.c: warning: 'err' may be used
  uninitialized in this function [-Wuninitialized]

At lines 109 and 207. Reported by Geert using the build service
several times, e.g.:

  https://lkml.org/lkml/2018/2/19/303

They are two false positives, since num_chars > 0 in the three present
configurations (boston, malta, sead3). Initialize to 0 in order to
silence the warning.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

Compiling with W=1 with gcc 7.2.0 gives 2 warnings:

  drivers/auxdisplay/img-ascii-lcd.c:233: warning: Function parameter or
  member 't' not described in 'img_ascii_lcd_scroll'
  drivers/auxdisplay/img-ascii-lcd.c:233: warning: Excess function
  parameter 'arg' description in 'img_ascii_lcd_scroll'

Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

Compiling with W=1 with gcc 7.2.0 gives 3 warnings like:

  drivers/auxdisplay/panel.c: In function ‘panel_process_inputs’:
  drivers/auxdisplay/panel.c:1374:17: warning: this statement may fall
  through [-Wimplicit-fallthrough=]

Cc: Willy Tarreau <w@1wt.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

This fixes an oops on unbind / module unload (on the musb omap2430
platform).

musb_remove function now calls musb_platform_exit before disabling
runtime pm.
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull NFS client bugfixes from Trond Myklebust:
 "Hightlights include the following stable fixes:

   - NFS: Fix an incorrect type in struct nfs_direct_req

   - pNFS: Prevent the layout header refcount going to zero in
     pnfs_roc()

   - NFS: Fix unstable write completion"

* tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix unstable write completion
  pNFS: Prevent the layout header refcount going to zero in pnfs_roc()
  NFS: Fix an incorrect type in struct nfs_direct_req

Merge tag 'phy-for-4.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus

phy: for 4.16-rc

 *) Fix a Kbuild failure in qcom-ufs
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

While the specific UFS PHY drivers (14nm and 20nm) have a module
license, the common base module does not, leading to a Kbuild
failure:

WARNING: modpost: missing MODULE_LICENSE() in drivers/phy/qualcomm/phy-qcom-ufs.o
FATAL: modpost: GPL-incompatible module phy-qcom-ufs.ko uses GPL-only symbol 'clk_enable'

This adds a module description and license tag to fix the build.
I added both Yaniv and Vivek as authors here, as Yaniv sent the initial
submission, while Vivek did most of the work since.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Pull x86/pti updates from Thomas Gleixner:
 "Yet another pile of melted spectrum related updates:

   - Drop native vsyscall support finally as it causes more trouble than
     benefit.

   - Make microcode loading more robust. There were a few issues
     especially related to late loading which are now surfacing because
     late loading of the IB* microcodes addressing spectre issues has
     become more widely used.

   - Simplify and robustify the syscall handling in the entry code

   - Prevent kprobes on the entry trampoline code which lead to kernel
     crashes when the probe hits before CR3 is updated

   - Don't check microcode versions when running on hypervisors as they
     are considered as lying anyway.

   - Fix the 32bit objtool build and a coment typo"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix kernel crash when probing .entry_trampoline code
  x86/pti: Fix a comment typo
  x86/microcode: Synchronize late microcode loading
  x86/microcode: Request microcode on the BSP
  x86/microcode/intel: Look into the patch cache first
  x86/microcode: Do not upload microcode if CPUs are offline
  x86/microcode/intel: Writeback and invalidate caches before updating microcode
  x86/microcode/intel: Check microcode revision before updating sibling threads
  x86/microcode: Get rid of struct apply_microcode_ctx
  x86/spectre_v2: Don't check microcode versions when running under hypervisors
  x86/vsyscall/64: Drop "native" vsyscalls
  x86/entry/64/compat: Save one instruction in entry_INT80_compat()
  x86/entry: Do not special-case clone(2) in compat entry
  x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls
  x86/syscalls: Use proper syscall definition for sys_ioperm()
  x86/entry: Remove stale syscall prototype
  x86/syscalls/32: Simplify $entry == $compat entries
  objtool: Fix 32-bit build

Pull timer fix from Thomas Gleixner:
 "Just a single fix which adds a missing Kconfig dependency to avoid
  unmet dependency warnings"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency

Pull RAS fixes from Thomas Gleixner:
 "Two small fixes for RAS/MCE:

   - Serialize sysfs changes to avoid concurrent modificaiton of
     underlying data

   - Add microcode revision to Machine Check records. This should have
     been there forever, but now with the broken microcode versions in
     the wild it has become important"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MCE: Serialize sysfs changes
  x86/MCE: Save microcode revision in machine check records

Pull perf updates from Thomas Gleixner:
 "Another set of perf updates:

   - Fix a Skylake Uncore event format declaration

   - Prevent perf pipe mode from crahsing which was caused by a missing
     buffer allocation

   - Make the perf top popup message which tells the user that it uses
     fallback mode on older kernels a debug message.

   - Make perf context rescheduling work correcctly

   - Robustify the jump error drawing in perf browser mode so it does
     not try to create references to NULL initialized offset entries

   - Make trigger_on() robust so it does not enable the trigger before
     everything is set up correctly to handle it

   - Make perf auxtrace respect the --no-itrace option so it does not
     try to queue AUX data for decoding.

   - Prevent having different number of field separators in CVS output
     lines when a counter is not supported.

   - Make the perf kallsyms man page usage behave like it does for all
     other perf commands.

   - Synchronize the kernel headers"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix ctx_event_type in ctx_resched()
  perf tools: Fix trigger class trigger_on()
  perf auxtrace: Prevent decoding when --no-itrace
  perf stat: Fix CVS output format for non-supported counters
  tools headers: Sync x86's cpufeatures.h
  tools headers: Sync copy of kvm UAPI headers
  perf record: Fix crash in pipe mode
  perf annotate browser: Be more robust when drawing jump arrows
  perf top: Fix annoying fallback message on older kernels
  perf kallsyms: Fix the usage on the man page
  perf/x86/intel/uncore: Fix Skylake UPI event format

Pull locking fix from Thomas Gleixner:
 "rt_mutex_futex_unlock() grew a new irq-off call site, but the function
  assumes that its always called from irq enabled context.

  Use (un)lock_irqsafe() to handle the new call site correctly"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites

Pull dmaengine fixes from Vinod Koul:
 "Two small fixes are for this cycle:

   - fix max_chunk_size for rcar-dmac for R-Car Gen3

   - fix clock resource of mv_xor_v2"

* tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
  dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3

Pull GPIO fix from Linus Walleij:
 "This is a single GPIO fix for the v4.16 series affecting the Renesas
  driver, and fixes wakeup from external stuff"

* tag 'gpio-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: rcar: Use wakeup_path i.s.o. explicit clock handling

On the CP110 components which are present on the Armada 7K/8K SoC we need
to explicitly enable the clock for the registers. However it is not
needed for the AP8xx component, that's why this clock is optional.

With this patch both clock have now a name, but in order to be backward
compatible, the name of the first clock is not used. It allows to still
use this clock with a device tree using the old binding.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Merge tag 'kbuild-fixes-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - make fixdep parse kconfig.h to fix missing rebuild

 - replace hyphens with underscores in builtin DTB label names

 - fix typos

* tag 'kbuild-fixes-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Handle builtin dtb file names containing hyphens
  scripts/bloat-o-meter: fix typos in help
  fixdep: do not ignore kconfig.h
  fixdep: remove some false CONFIG_ matches
  fixdep: remove stale references to uml-config.h

Pull watchdog fixes from Wim Van Sebroeck:

 - f71808e_wdt: Fix magic close handling

 - sbsa: 32-bit read fix for WCV

 - hpwdt: Remove legacy NMI sourcing

* tag 'linux-watchdog-4.16-fixes-2' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: hpwdt: Remove legacy NMI sourcing.
  watchdog: sbsa: use 32-bit read for WCV
  watchdog: f71808e_wdt: Fix magic close handling

Pull block fixes from Jens Axboe:

 - a xen-blkfront fix from Bhavesh with a multiqueue fix when
   detaching/re-attaching

 - a few important NVMe fixes, including a revert for a sysfs fix that
   caused some user space confusion

 - two bcache fixes by way of Michael Lyle

 - a loop regression fix, fixing an issue with lost writes on DAX.

* tag 'for-linus-20180309' of git://git.kernel.dk/linux-block:
  loop: Fix lost writes caused by missing flag
  nvme_fc: rework sqsize handling
  nvme-fabrics: Ignore nr_io_queues option for discovery controllers
  xen-blkfront: move negotiate_mq to cover all cases of new VBDs
  Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers"
  bcache: don't attach backing with duplicate UUID
  bcache: fix crashes in duplicate cache device register
  nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectors
  nvme-pci: Fix EEH failure on ppc

Merge tag 'for-4.16/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix an uninitialized variable false warning in dm bufio

 - Fix DM's passthrough ioctl support to be race free against an
   underlying device being removed.

 - Fix corner-case of DM raid resync reporting if/when the raid becomes
   degraded during resync; otherwise automated raid repair will fail.

 - A few DM multipath fixes to make non-SCSI optimizations, that were
   introduced during the 4.16 merge, useful for all non-SCSI devices,
   rather than narrowly define this non-SCSI mode in terms of "nvme".

   This allows the removal of "queue_mode nvme" that really didn't need
   to be introduced. Instead DM core will internalize whether
   nvme-specific IO submission optimizations are doable and DM multipath
   will only do SCSI-specific device handler operations if SCSI is in
   use.

* tag 'for-4.16/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm table: allow upgrade from bio-based to specialized bio-based variant
  dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks
  dm table: fix "nvme" test
  dm raid: fix incorrect sync_ratio when degraded
  dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl
  dm bufio: avoid false-positive Wmaybe-uninitialized warning

Pull rdma fixes from Doug Ledford:

 - Various driver bug fixes in mlx5, mlx4, bnxt_re and qedr, ranging
   from bugs under load to bad error case handling

 - There in one largish patch fixing the locking in bnxt_re to avoid a
   machine hard lock situation

 - A few core bugs on error paths

 - A patch to reduce stack usage in the new CQ API

 - One mlx5 regression introduced in this merge window

 - There were new syzkaller scripts written for the RDMA subsystem and
   we are fixing issues found by the bot

 - One of the commits (aa0de36a “RDMA/mlx5: Fix integer overflow
   while resizing CQ”) is missing part of the commit log message and one
   of the SOB lines. The original patch was from Leon Romanovsky, and a
   cut-n-paste separator in the commit message confused patchworks which
   then put the end of message separator in the wrong place in the
   downloaded patch, and I didn’t notice in time. The patch made it into
   the official branch, and the only way to fix it in-place was to
   rebase. Given the pain that a rebase causes, and the fact that the
   patch has relevant tags for stable and syzkaller, a revert of the
   munged patch and a reapplication of the original patch with the log
   message intact was done.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits)
  RDMA/mlx5: Fix integer overflow while resizing CQ
  Revert "RDMA/mlx5: Fix integer overflow while resizing CQ"
  RDMA/ucma: Check that user doesn't overflow QP state
  RDMA/mlx5: Fix integer overflow while resizing CQ
  RDMA/ucma: Limit possible option size
  IB/core: Fix possible crash to access NULL netdev
  RDMA/bnxt_re: Avoid Hard lockup during error CQE processing
  RDMA/core: Reduce poll batch for direct cq polling
  IB/mlx5: Fix an error code in __mlx5_ib_modify_qp()
  IB/mlx5: When not in dual port RoCE mode, use provided port as native
  IB/mlx4: Include GID type when deleting GIDs from HW table under RoCE
  IB/mlx4: Fix corruption of RoCEv2 IPv4 GIDs
  RDMA/qedr: Fix iWARP write and send with immediate
  RDMA/qedr: Fix kernel panic when running fio over NFSoRDMA
  RDMA/qedr: Fix iWARP connect with port mapper
  RDMA/qedr: Fix ipv6 destination address resolution
  IB/core : Add null pointer check in addr_resolve
  RDMA/bnxt_re: Fix the ib_reg failure cleanup
  RDMA/bnxt_re: Fix incorrect DB offset calculation
  RDMA/bnxt_re: Unconditionly fence non wire memory operations
  ...

Pull x86 platform driver fixes from Darren Hart:
 "Correct a module loading race condition between the DELL_SMBIOS
  backend modules and the first user by converting them to bool features
  of the DELL_SMBIOS driver. Fixup the resulting Kconfig dependency
  issue with DCDBAS"

* tag 'platform-drivers-x86-v4.16-6' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: dell-smbios: Resolve dependency error on DCDBAS
  platform/x86: Allow for SMBIOS backend defaults
  platform/x86: dell-smbios: Link all dell-smbios-* modules together
  platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-base
  platform/x86: dell-smbios: Correct some style warnings

Pull KVM fixes from Radim Krčmář:
 "PPC:

   - Fix guest time accounting in the host

   - Fix large-page backing for radix guests on POWER9

   - Fix HPT guests on POWER9 backed by 2M or 1G pages

   - Compile fixes for some configs and gcc versions

  s390:

   - Fix random memory corruption when running as guest2 (e.g. KVM in
     LPAR) and starting guest3 (e.g. nested KVM) with many CPUs

   - Export forgotten io interrupt delivery statistics counter"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix memory overwrites when not using SCA entries
  KVM: PPC: Book3S HV: Fix guest time accounting with VIRT_CPU_ACCOUNTING_GEN
  KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing
  KVM: PPC: Book3S HV: Fix handling of large pages in radix page fault handler
  KVM: s390: provide io interrupt kvm_stat
  KVM: PPC: Book3S: Fix compile error that occurs with some gcc versions
  KVM: PPC: Fix compile error that occurs when CONFIG_ALTIVEC=n

Pull xen fix from Juergen Gross:
 "Just one fix for the correct error handling after a failed
  device_register()"

* tag 'for-linus-4.16a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: xenbus: use put_device() instead of kfree()

Pull arm64 fixes from Catalin Marinas:

 - The SMCCC firmware interface for the spectre variant 2 mitigation has
   been updated to allow the discovery of whether the CPU needs the
   workaround. This pull request relaxes the kernel check on the return
   value from firmware.

 - Fix the commit allowing changing from global to non-global page table
   entries which inadvertently disallowed other safe attribute changes.

 - Fix sleeping in atomic during the arm_perf_teardown_cpu() code.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery
  arm_pmu: Use disable_irq_nosync when disabling SPI in CPU teardown hook
  arm64: mm: fix thinko in non-global page table attribute check

Pull Documentation build fix from Jonathan Corbet:
 "The Sphinx 1.7 release broke the build process for reasons that are
  mostly our fault.

  This is a single fix cherry-picked from docs-next that restores docs
  buildability for all supported Sphinx versions"

* tag 'docs-4.16-fix' of git://git.lwn.net/linux:
  Documentation/sphinx: Fix Directive import error