- 29 Oct, 2012 16 commits
-
-
Antonio Quartulli authored
Signed-off-by:Antonio Quartulli <ordex@autistici.org>
-
Antonio Quartulli authored
in case of client roaming a new global entry is added while a corresponding local one is still present. In this case the node can safely pass the WIFI flag from the local to the global entry. This change is required to let the AP-isolation correctly working in case of roaming: if a generic WIFI client C roams from node A to B, A adds a global entry for C without adding any WIFI flag. The latter will be set only later, once A has received C's advertisement from B. In this time period the AP-Isolation (if enabled) would not correctly work since C is not marked as WIFI, so allowing it to communicate with other WIFI clients. Signed-off-by: -
Antonio Quartulli authored
In order to properly convert a bitwise AND to a boolean value, the whole expression must be prepended by "!!". Signed-off-by: -
Antonio Quartulli authored
In batadv_check_unicast_ttvn() the code accesses both the unicast header and the Ethernet header in the payload. For this reason pskb_may_pull() must be invoked to check for the required space. Signed-off-by: -
Antonio Quartulli authored
To simplify TranslationTable debugging it is better to print the packet rerouting message on the DBG_TT log level. In this way a developer interested in packets rerouting doesn't need to filter it out of the whole ROUTES log. Moreover, since this message will appear for each rerouted message, it is now "ratelimited". Signed-off-by: -
Antonio Quartulli authored
in case of a new global entry added because of roaming, the roam_at field must be properly initiated with the current time. This value will be later use to purge this entry out on time out (if nobody claims it). Instead roam_at field is now set to zero in this situation leading to an immediate purging of the related entry. Signed-off-by: -
Simon Wunderlich authored
We have seen this to break networks when used with bridge loop avoidance. As we can't see any benefit from sending these ancient frames via our mesh, we just drop them. Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
-
Sven Eckelmann authored
The test whether we can use a router for alternating bonding should only be done once because it is already known that it is still usable and will not be deleted from the list soon. This patch addresses Coverity #712285: Unchecked return value Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
-
Sven Eckelmann authored
New operations should not be started when they need an increased module reference counter and try_module_get failed. This patch addresses Coverity #712284: Unchecked return value Signed-off-by:
-
Sven Eckelmann authored
batadv_bit_get_packet checks for all common situations before it decides that the new received packet indicates that the host was restarted. This extra condition check at the end of the function is not necessary because this condition is always true. This patch addresses Coverity #712296: Logically dead code Signed-off-by:
-
Sven Eckelmann authored
Transmissions over batman-adv devices always start another nested transmission over devices attached to the batman-adv interface. These devices usually use the ethernet lockdep class for the tx_queue lock which is also set by default for all batman-adv devices. Lockdep will detect a nested locking attempt of two locks with the same class and warn about a possible deadlock. This is the default and expected behavior and should not alarm the locking correctness prove mechanism. Therefore, the locks for all netdevice specific tx queues get a special batman-adv lock class to avoid a false positive for each transmission. Reported-by:
Linus Luessing <linus.luessing@web.de> Signed-off-by:
-
Antonio Quartulli authored
In case of hash_add failure tt_global_add() must return 0 (which means on entry insertion). Signed-off-by: -
Marek Lindner authored
Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Sven Eckelmann authored
Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Antonio Quartulli authored
To avoid code duplication and to simplify further changes, check_unicast_packet() is now used in recv_roam_adv() to check for not well formed packets and so discard them. Signed-off-by:
-
- 28 Oct, 2012 8 commits
-
-
Bjørn Mork authored
Removes the warnings drivers/net/usb/sierra_net.c:343:45: warning: incorrect type in assignment (different base types) drivers/net/usb/sierra_net.c:343:45: expected unsigned short [unsigned] [short] [usertype] <noident> drivers/net/usb/sierra_net.c:343:45: got restricted __be16 [usertype] <noident> and drivers/net/usb/sierra_net.c:658:18: warning: cast to restricted __le16 Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
Fixes the sparse warning drivers/net/usb/cdc_ncm.c:836:9: warning: context imbalance in 'cdc_ncm_txpath_bh' - different lock contexts for basic block Signed-off-by:
-
Bjørn Mork authored
Probably doesn't matter much since the value is used as a boolean anyway, but it removes the sparse warning: drivers/net/usb/cdc_ncm.c:1090:32: warning: incorrect type in assignment (different base types) drivers/net/usb/cdc_ncm.c:1090:32: expected unsigned short [unsigned] [usertype] connected drivers/net/usb/cdc_ncm.c:1090:32: got restricted __le16 [usertype] wValue Signed-off-by:
-
Nicolas Dichtel authored
This message allows to get the devconf for an interface. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Nicolas Dichtel authored
Signed-off-by:
-
Nicolas Dichtel authored
This message allows to get the devconf for an interface. Signed-off-by:
-
Nicolas Dichtel authored
Signed-off-by:
-
Nicolas Dichtel authored
A new type is added to allow userland to monitor protocol configuration, like IPv4 or IPv6. For example, monitoring the state of the forwarding status of an interface of the system. Signed-off-by:
-
- 26 Oct, 2012 16 commits
-
-
git://1984.lsi.us.es/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following changeset contains updates for IPVS from Jesper Dangaard Brouer that did not reach the previous merge window in time. More specifically, updates to improve IPv6 support in IPVS. More relevantly, some of the existing code performed wrong handling of the extensions headers and better fragmentation handling. Jesper promised more follow-up patches to refine this after this batch hits net-next. Yet to come. ==================== Signed-off-by: -
David S. Miller authored
Only the real implementation got updated. Signed-off-by: -
Alan Cox authored
Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
multi is assigned to 0 and then acts as a constant. Remove the dead code. Signed-off-by:
-
Daniel Wagner authored
The cgroup logic part of net_cls is very similar as the one in net_prio. Let's stream line the net_cls logic with the net_prio one. The net_prio update logic was changed by following commit (note there were some changes necessary later on) commit 406a3c63 Author: John Fastabend <john.r.fastabend@intel.com> Date: Fri Jul 20 10:39:25 2012 +0000 net: netprio_cgroup: rework update socket logic Instead of updating the sk_cgrp_prioidx struct field on every send this only updates the field when a task is moved via cgroup infrastructure. This allows sockets that may be used by a kernel worker thread to be managed. For example in the iscsi case today a user can put iscsid in a netprio cgroup and control traffic will be sent with the correct sk_cgrp_prioidx value set but as soon as data is sent the kernel worker thread isssues a send and sk_cgrp_prioidx is updated with the kernel worker threads value which is the default case. It seems more correct to only update the field when the user explicitly sets it via control group infrastructure. This allows the users to manage sockets that may be used with other threads. Since classid is now updated when the task is moved between the cgroups, we don't have to call sock_update_classid() from various places to ensure we always using the latest classid value. [v2: Use iterate_fd() instead of open coding] Signed-off-by:
Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Li Zefan <lizefan@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Joe Perches <joe@perches.com> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: <netdev@vger.kernel.org> Cc: <cgroups@vger.kernel.org> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Daniel Wagner authored
sock_update_classid() assumes that the update operation always are applied on the current task. sock_update_classid() needs to know on which tasks to work on in order to be able to migrate task between cgroups using the struct cgroup_subsys attach() callback. Signed-off-by:
-
Daniel Wagner authored
As Eric pointed out: "Hey task_cls_classid() has its own rcu protection since commit 3fb5a991 (cls_cgroup: Fix rcu lockdep warning) So we can safely revert Paul commit (1144182a) (We no longer need rcu_read_lock/unlock here)" Signed-off-by:
-
Daniel Wagner authored
The classid type used throughout the kernel is u32. Signed-off-by:
-
Daniel Wagner authored
net_prio_attach() is only access via cgroup_subsys callbacks, therefore we can reduce the visibility of this function. Signed-off-by:
-
Ming Lei authored
Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
