[ Upstream commit 79462ad0 ]

郭永刚 reported that one could simply crash the kernel as root by
using a simple program:

	int socket_fd;
	struct sockaddr_in addr;
	addr.sin_port = 0;
	addr.sin_addr.s_addr = INADDR_ANY;
	addr.sin_family = 10;

	socket_fd = socket(10,3,0x40000000);
	connect(socket_fd , &addr,16);

AF_INET, AF_INET6 sockets actually only support 8-bit protocol
identifiers. inet_sock's skc_protocol field thus is sized accordingly,
thus larger protocol identifiers simply cut off the higher bits and
store a zero in the protocol fields.

This could lead to e.g. NULL function pointer because as a result of
the cut off inet_num is zero and we call down to inet_autobind, which
is NULL for raw sockets.

kernel: Call Trace:
kernel:  [<ffffffff816db90e>] ? inet_autobind+0x2e/0x70
kernel:  [<ffffffff816db9a4>] inet_dgram_connect+0x54/0x80
kernel:  [<ffffffff81645069>] SYSC_connect+0xd9/0x110
kernel:  [<ffffffff810ac51b>] ? ptrace_notify+0x5b/0x80
kernel:  [<ffffffff810236d8>] ? syscall_trace_enter_phase2+0x108/0x200
kernel:  [<ffffffff81645e0e>] SyS_connect+0xe/0x10
kernel:  [<ffffffff81779515>] tracesys_phase2+0x84/0x89

I found no particular commit which introduced this problem.

CVE: CVE-2015-8543
Cc: Cong Wang <cwang@twopensource.com>
Reported-by: 郭永刚 <guoyonggang@360.cn>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9470e24f ]

SCTP is lacking proper np->opt cloning at accept() time.

TCP and DCCP use ipv6_dup_options() helper, do the same
in SCTP.

We might later factorize this code in a common helper to avoid
future mistakes.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 01ce63c9 ]

Dmitry Vyukov reported that SCTP was triggering a WARN on socket destroy
related to disabling sock timestamp.

When SCTP accepts an association or peel one off, it copies sock flags
but forgot to call net_enable_timestamp() if a packet timestamping flag
was copied, leading to extra calls to net_disable_timestamp() whenever
such clones were closed.

The fix is to call net_enable_timestamp() whenever we copy a sock with
that flag on, like tcp does.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f2a3771a ]

atl1c driver is doing order-4 allocation with GFP_ATOMIC
priority. That often breaks  networking after resume. Switch to
GFP_KERNEL. Still not ideal, but should be significantly better.

atl1c_setup_ring_resources() is called from .open() function, and
already uses GFP_KERNEL, so this change is safe.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6a61d4db ]

Parameters were updated only if the kernel was unable to find the tunnel
with the new parameters, ie only if core pamareters were updated (keys,
addr, link, type).
Now it's possible to update ttl, hoplimit, flowinfo and flags.

Fixes: c12b395a ("gre: Support GRE over IPv6")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5377adb0 upstream.

usb_parse_ss_endpoint_companion() now decodes the burst multiplier
correctly in order to check that it's <= 3, but still uses the wrong
expression if warning that it's > 3.

Fixes: ff30cbc8 ("usb: Use the USB_SS_MULT() macro to get the ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f9fa1887 upstream.

qset_fill_page_list() do not check for dma mapping errors.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ad87e032 upstream.

Some USB device / host controller combinations seem to have problems
with Link Power Management.  For example, Steinar found that his xHCI
controller wouldn't handle bandwidth calculations correctly for two
video cards simultaneously when LPM was enabled, even though the bus
had plenty of bandwidth available.

This patch introduces a new quirk flag for devices that should remain
disabled for LPM, and creates quirk entries for Steinar's devices.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7c90e610 upstream.

CP2110 ID (0x10c4, 0xea80) doesn't belong here because it's a HID
and completely different from CP210x devices.
Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f33a7f72 upstream.

Some modems, such as the Telit UE910, are using an Infineon Flash Loader
utility. It has two interfaces, 2/2/0 (Abstract Modem) and 10/0/0 (CDC
Data). The latter can be used as a serial interface to upgrade the
firmware of the modem. However, that isn't possible when the cdc-acm
driver takes control of the device.

The following is an explanation of the behaviour by Daniele Palmas during
discussion on linux-usb.

"This is what happens when the device is turned on (without modifying
the drivers):

[155492.352031] usb 1-3: new high-speed USB device number 27 using ehci-pci
[155492.485429] usb 1-3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
[155492.485436] usb 1-3: New USB device found, idVendor=058b, idProduct=0041
[155492.485439] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[155492.485952] cdc_acm 1-3:1.0: ttyACM0: USB ACM device

This is the flashing device that is caught by the cdc-acm driver. Once
the ttyACM appears, the application starts sending a magic string
(simple write on the file descriptor) to keep the device in flashing
mode. If this magic string is not properly received in a certain time
interval, the modem goes on in normal operative mode:

[155493.748094] usb 1-3: USB disconnect, device number 27
[155494.916025] usb 1-3: new high-speed USB device number 28 using ehci-pci
[155495.059978] usb 1-3: New USB device found, idVendor=1bc7, idProduct=0021
[155495.059983] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[155495.059986] usb 1-3: Product: 6 CDC-ACM + 1 CDC-ECM
[155495.059989] usb 1-3: Manufacturer: Telit
[155495.059992] usb 1-3: SerialNumber: 359658044004697
[155495.138958] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[155495.140832] cdc_acm 1-3:1.2: ttyACM1: USB ACM device
[155495.142827] cdc_acm 1-3:1.4: ttyACM2: USB ACM device
[155495.144462] cdc_acm 1-3:1.6: ttyACM3: USB ACM device
[155495.145967] cdc_acm 1-3:1.8: ttyACM4: USB ACM device
[155495.147588] cdc_acm 1-3:1.10: ttyACM5: USB ACM device
[155495.154322] cdc_ether 1-3:1.12 wwan0: register 'cdc_ether' at usb-0000:00:1a.7-3, Mobile Broadband Network Device, 00:00:11:12:13:14

Using the cdc-acm driver, the string, though being sent in the same way
than using the usb-serial-simple driver (I can confirm that the data is
passing properly since I used an hw usb sniffer), does not make the
device to stay in flashing mode."
Signed-off-by: Jonas Jonsson <jonas@ludd.ltu.se>
Tested-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c812012f upstream.

If we pass in an empty nfs_fattr struct to nfs_update_inode, it will
(correctly) not update any of the attributes, but it then clears the
NFS_INO_INVALID_ATTR flag, which indicates that the attributes are
up to date. Don't clear the flag if the fattr struct has no valid
attrs to apply.
Reviewed-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c68a027c upstream.

If clp->cl_cb_ident is zero, then nfs_cb_idr_remove_locked() skips removing
it when the nfs_client is freed.  A decoding or server bug can then find
and try to put that first nfs_client which would lead to a crash.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: d6870312 ("nfs4client: convert to idr_alloc()")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 100ceb66 upstream.

Reported by Clifford and Craig for JMicron OHCI-1394 + SDHCI combo
controllers:  Often or even most of the time, the controller is
initialized with the message "added OHCI v1.10 device as card 0, 4 IR +
0 IT contexts, quirks 0x10".  With 0 isochronous transmit DMA contexts
(IT contexts), applications like audio output are impossible.

However, OHCI-1394 demands that at least 4 IT contexts are implemented
by the link layer controller, and indeed JMicron JMB38x do implement
four of them.  Only their IsoXmitIntMask register is unreliable at early
access.

With my own JMB381 single function controller I found:
  - I can reproduce the problem with a lower probability than Craig's.
  - If I put a loop around the section which clears and reads
    IsoXmitIntMask, then either the first or the second attempt will
    return the correct initial mask of 0x0000000f.  I never encountered
    a case of needing more than a second attempt.
  - Consequently, if I put a dummy reg_read(...IsoXmitIntMaskSet)
    before the first write, the subsequent read will return the correct
    result.
  - If I merely ignore a wrong read result and force the known real
    result, later isochronous transmit DMA usage works just fine.

So let's just fix this chip bug up by the latter method.  Tested with
JMB381 on kernel 3.13 and 4.3.

Since OHCI-1394 generally requires 4 IT contexts at a minium, this
workaround is simply applied whenever the initial read of IsoXmitIntMask
returns 0, regardless whether it's a JMicron chip or not.  I never heard
of this issue together with any other chip though.

I am not 100% sure that this fix works on the OHCI-1394 part of JMB380
and JMB388 combo controllers exactly the same as on the JMB381 single-
function controller, but so far I haven't had a chance to let an owner
of a combo chip run a patched kernel.

Strangely enough, IsoRecvIntMask is always reported correctly, even
though it is probed right before IsoXmitIntMask.

Reported-by: Clifford Dunn
Reported-by: Craig Moore <craig.moore@qenos.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4327ba52 upstream.

If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the
journaling will be aborted first and the error number will be recorded
into JBD2 superblock and, finally, the system will enter into the
panic state in "errors=panic" option.  But, in the rare case, this
sequence is little twisted like the below figure and it will happen
that the system enters into panic state, which means the system reset
in mobile environment, before completion of recording an error in the
journal superblock. In this case, e2fsck cannot recognize that the
filesystem failure occurred in the previous run and the corruption
wouldn't be fixed.

Task A                        Task B
ext4_handle_error()
-> jbd2_journal_abort()
  -> __journal_abort_soft()
    -> __jbd2_journal_abort_hard()
    | -> journal->j_flags |= JBD2_ABORT;
    |
    |                         __ext4_abort()
    |                         -> jbd2_journal_abort()
    |                         | -> __journal_abort_soft()
    |                         |   -> if (journal->j_flags & JBD2_ABORT)
    |                         |           return;
    |                         -> panic()
    |
    -> jbd2_journal_update_sb_errno()
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1d512cb7 upstream.

If we are using the NO_HOLES feature, we have a tiny time window when
running delalloc for a nodatacow inode where we can race with a concurrent
link or xattr add operation leading to a BUG_ON.

This happens because at run_delalloc_nocow() we end up casting a leaf item
of type BTRFS_INODE_[REF|EXTREF]_KEY or of type BTRFS_XATTR_ITEM_KEY to a
file extent item (struct btrfs_file_extent_item) and then analyse its
extent type field, which won't match any of the expected extent types
(values BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]) and therefore trigger an
explicit BUG_ON(1).

The following sequence diagram shows how the race happens when running a
no-cow dellaloc range [4K, 8K[ for inode 257 and we have the following
neighbour leafs:

             Leaf X (has N items)                    Leaf Y

 [ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ]  [ (257 EXTENT_DATA 8192), ... ]
              slot N - 2         slot N - 1              slot 0

 (Note the implicit hole for inode 257 regarding the [0, 8K[ range)

       CPU 1                                         CPU 2

 run_dealloc_nocow()
   btrfs_lookup_file_extent()
     --> searches for a key with value
         (257 EXTENT_DATA 4096) in the
         fs/subvol tree
     --> returns us a path with
         path->nodes[0] == leaf X and
         path->slots[0] == N

   because path->slots[0] is >=
   btrfs_header_nritems(leaf X), it
   calls btrfs_next_leaf()

   btrfs_next_leaf()
     --> releases the path

                                              hard link added to our inode,
                                              with key (257 INODE_REF 500)
                                              added to the end of leaf X,
                                              so leaf X now has N + 1 keys

     --> searches for the key
         (257 INODE_REF 256), because
         it was the last key in leaf X
         before it released the path,
         with path->keep_locks set to 1

     --> ends up at leaf X again and
         it verifies that the key
         (257 INODE_REF 256) is no longer
         the last key in the leaf, so it
         returns with path->nodes[0] ==
         leaf X and path->slots[0] == N,
         pointing to the new item with
         key (257 INODE_REF 500)

   the loop iteration of run_dealloc_nocow()
   does not break out the loop and continues
   because the key referenced in the path
   at path->nodes[0] and path->slots[0] is
   for inode 257, its type is < BTRFS_EXTENT_DATA_KEY
   and its offset (500) is less then our delalloc
   range's end (8192)

   the item pointed by the path, an inode reference item,
   is (incorrectly) interpreted as a file extent item and
   we get an invalid extent type, leading to the BUG_ON(1):

   if (extent_type == BTRFS_FILE_EXTENT_REG ||
      extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
       (...)
   } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
       (...)
   } else {
       BUG_ON(1)
   }

The same can happen if a xattr is added concurrently and ends up having
a key with an offset smaller then the delalloc's range end.

So fix this by skipping keys with a type smaller than
BTRFS_EXTENT_DATA_KEY.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 602dd62d ]

Dmitry Vyukov reported a memory leak using IPV6 SCTP sockets.

We need to call inet6_destroy_sock() to properly release
inet6 specific fields.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 264640fc ]

If a fragmented multicast packet is received on an ethernet device which
has an active macvlan on top of it, each fragment is duplicated and
received both on the underlying device and the macvlan. If some
fragments for macvlan are processed before the whole packet for the
underlying device is reassembled, the "overlapping fragments" test in
ip6_frag_queue() discards the whole fragment queue.

To resolve this, add device ifindex to the search key and require it to
match reassembling multicast packets and packets to link-local
addresses.

Note: similar patch has been already submitted by Yoshifuji Hideaki in

  http://patchwork.ozlabs.org/patch/220979/

but got lost and forgotten for some reason.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3c25a860 ]

Commit fcb26ec5 ("broadcom: move all PHY_ID's to header")
updated broadcom_tbl to use PHY_IDs, but incorrectly replaced 0x0143bca0
with PHY_ID_BCM5482 (making a duplicate entry, and completely omitting
the original). Fix that.

Fixes: fcb26ec5 ("broadcom: move all PHY_ID's to header")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4c698046 ]

Similar to ipv4, when destroying an mrt table the static mfc entries and
the static devices are kept, which leads to devices that can never be
destroyed (because of refcnt taken) and leaked memory. Make sure that
everything is cleaned up on netns destruction.

Fixes: 8229efda ("netns: ip6mr: enable namespace support in ipv6 multicast forwarding code")
CC: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0e615e96 ]

When destroying an mrt table the static mfc entries and the static
devices are kept, which leads to devices that can never be destroyed
(because of refcnt taken) and leaked memory, for example:
unreferenced object 0xffff880034c144c0 (size 192):
  comm "mfc-broken", pid 4777, jiffies 4320349055 (age 46001.964s)
  hex dump (first 32 bytes):
    98 53 f0 34 00 88 ff ff 98 53 f0 34 00 88 ff ff  .S.4.....S.4....
    ef 0a 0a 14 01 02 03 04 00 00 00 00 01 00 00 00  ................
  backtrace:
    [<ffffffff815c1b9e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811ea6e0>] kmem_cache_alloc+0x190/0x300
    [<ffffffff815931cb>] ip_mroute_setsockopt+0x5cb/0x910
    [<ffffffff8153d575>] do_ip_setsockopt.isra.11+0x105/0xff0
    [<ffffffff8153e490>] ip_setsockopt+0x30/0xa0
    [<ffffffff81564e13>] raw_setsockopt+0x33/0x90
    [<ffffffff814d1e14>] sock_common_setsockopt+0x14/0x20
    [<ffffffff814d0b51>] SyS_setsockopt+0x71/0xc0
    [<ffffffff815cdbf6>] entry_SYSCALL_64_fastpath+0x16/0x7a
    [<ffffffffffffffff>] 0xffffffffffffffff

Make sure that everything is cleaned on netns destruction.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6900317f ]

David and HacKurx reported a following/similar size overflow triggered
in a grsecurity kernel, thanks to PaX's gcc size overflow plugin:

(Already fixed in later grsecurity versions by Brad and PaX Team.)

[ 1002.296137] PAX: size overflow detected in function scm_detach_fds net/core/scm.c:314
               cicus.202_127 min, count: 4, decl: msg_controllen; num: 0; context: msghdr;
[ 1002.296145] CPU: 0 PID: 3685 Comm: scm_rights_recv Not tainted 4.2.3-grsec+ #7
[ 1002.296149] Hardware name: Apple Inc. MacBookAir5,1/Mac-66F35F19FE2A0D05, [...]
[ 1002.296153]  ffffffff81c27366 0000000000000000 ffffffff81c27375 ffffc90007843aa8
[ 1002.296162]  ffffffff818129ba 0000000000000000 ffffffff81c27366 ffffc90007843ad8
[ 1002.296169]  ffffffff8121f838 fffffffffffffffc fffffffffffffffc ffffc90007843e60
[ 1002.296176] Call Trace:
[ 1002.296190]  [<ffffffff818129ba>] dump_stack+0x45/0x57
[ 1002.296200]  [<ffffffff8121f838>] report_size_overflow+0x38/0x60
[ 1002.296209]  [<ffffffff816a979e>] scm_detach_fds+0x2ce/0x300
[ 1002.296220]  [<ffffffff81791899>] unix_stream_read_generic+0x609/0x930
[ 1002.296228]  [<ffffffff81791c9f>] unix_stream_recvmsg+0x4f/0x60
[ 1002.296236]  [<ffffffff8178dc00>] ? unix_set_peek_off+0x50/0x50
[ 1002.296243]  [<ffffffff8168fac7>] sock_recvmsg+0x47/0x60
[ 1002.296248]  [<ffffffff81691522>] ___sys_recvmsg+0xe2/0x1e0
[ 1002.296257]  [<ffffffff81693496>] __sys_recvmsg+0x46/0x80
[ 1002.296263]  [<ffffffff816934fc>] SyS_recvmsg+0x2c/0x40
[ 1002.296271]  [<ffffffff8181a3ab>] entry_SYSCALL_64_fastpath+0x12/0x85

Further investigation showed that this can happen when an *odd* number of
fds are being passed over AF_UNIX sockets.

In these cases CMSG_LEN(i * sizeof(int)) and CMSG_SPACE(i * sizeof(int)),
where i is the number of successfully passed fds, differ by 4 bytes due
to the extra CMSG_ALIGN() padding in CMSG_SPACE() to an 8 byte boundary
on 64 bit. The padding is used to align subsequent cmsg headers in the
control buffer.

When the control buffer passed in from the receiver side *lacks* these 4
bytes (e.g. due to buggy/wrong API usage), then msg->msg_controllen will
overflow in scm_detach_fds():

  int cmlen = CMSG_LEN(i * sizeof(int));  <--- cmlen w/o tail-padding
  err = put_user(SOL_SOCKET, &cm->cmsg_level);
  if (!err)
    err = put_user(SCM_RIGHTS, &cm->cmsg_type);
  if (!err)
    err = put_user(cmlen, &cm->cmsg_len);
  if (!err) {
    cmlen = CMSG_SPACE(i * sizeof(int));  <--- cmlen w/ 4 byte extra tail-padding
    msg->msg_control += cmlen;
    msg->msg_controllen -= cmlen;         <--- iff no tail-padding space here ...
  }                                            ... wrap-around

F.e. it will wrap to a length of 18446744073709551612 bytes in case the
receiver passed in msg->msg_controllen of 20 bytes, and the sender
properly transferred 1 fd to the receiver, so that its CMSG_LEN results
in 20 bytes and CMSG_SPACE in 24 bytes.

In case of MSG_CMSG_COMPAT (scm_detach_fds_compat()), I haven't seen an
issue in my tests as alignment seems always on 4 byte boundary. Same
should be in case of native 32 bit, where we end up with 4 byte boundaries
as well.

In practice, passing msg->msg_controllen of 20 to recvmsg() while receiving
a single fd would mean that on successful return, msg->msg_controllen is
being set by the kernel to 24 bytes instead, thus more than the input
buffer advertised. It could f.e. become an issue if such application later
on zeroes or copies the control buffer based on the returned msg->msg_controllen
elsewhere.

Maximum number of fds we can send is a hard upper limit SCM_MAX_FD (253).

Going over the code, it seems like msg->msg_controllen is not being read
after scm_detach_fds() in scm_recv() anymore by the kernel, good!

Relevant recvmsg() handler are unix_dgram_recvmsg() (unix_seqpacket_recvmsg())
and unix_stream_recvmsg(). Both return back to their recvmsg() caller,
and ___sys_recvmsg() places the updated length, that is, new msg_control -
old msg_control pointer into msg->msg_controllen (hence the 24 bytes seen
in the example).

Long time ago, Wei Yongjun fixed something related in commit 1ac70e7a
("[NET]: Fix function put_cmsg() which may cause usr application memory
overflow").

RFC3542, section 20.2. says:

  The fields shown as "XX" are possible padding, between the cmsghdr
  structure and the data, and between the data and the next cmsghdr
  structure, if required by the implementation. While sending an
  application may or may not include padding at the end of last
  ancillary data in msg_controllen and implementations must accept both
  as valid. On receiving a portable application must provide space for
  padding at the end of the last ancillary data as implementations may
  copy out the padding at the end of the control message buffer and
  include it in the received msg_controllen. When recvmsg() is called
  if msg_controllen is too small for all the ancillary data items
  including any trailing padding after the last item an implementation
  may set MSG_CTRUNC.

Since we didn't place MSG_CTRUNC for already quite a long time, just do
the same as in 1ac70e7a to avoid an overflow.

Btw, even man-page author got this wrong :/ See db939c9b26e9 ("cmsg.3: Fix
error in SCM_RIGHTS code sample"). Some people must have copied this (?),
thus it got triggered in the wild (reported several times during boot by
David and HacKurx).

No Fixes tag this time as pre 2002 (that is, pre history tree).
Reported-by: David Sterba <dave@jikos.cz>
Reported-by: HacKurx <hackurx@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 142a2e7e ]

Dmitry provided a syzkaller (http://github.com/google/syzkaller)
generated program that triggers the WARNING at
net/ipv4/tcp.c:1729 in tcp_recvmsg() :

WARN_ON(tp->copied_seq != tp->rcv_nxt &&
        !(flags & (MSG_PEEK | MSG_TRUNC)));

His program is specifically attempting a Cross SYN TCP exchange,
that we support (for the pleasure of hackers ?), but it looks we
lack proper tcp->copied_seq initialization.

Thanks again Dmitry for your report and testings.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1b8e6a01 ]

When a passive TCP is created, we eventually call tcp_md5_do_add()
with sk pointing to the child. It is not owner by the user yet (we
will add this socket into listener accept queue a bit later anyway)

But we do own the spinlock, so amend the lockdep annotation to avoid
following splat :

[ 8451.090932] net/ipv4/tcp_ipv4.c:923 suspicious rcu_dereference_protected() usage!
[ 8451.090932]
[ 8451.090932] other info that might help us debug this:
[ 8451.090932]
[ 8451.090934]
[ 8451.090934] rcu_scheduler_active = 1, debug_locks = 1
[ 8451.090936] 3 locks held by socket_sockopt_/214795:
[ 8451.090936]  #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff855c6ac1>] __netif_receive_skb_core+0x151/0xe90
[ 8451.090947]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff85618143>] ip_local_deliver_finish+0x43/0x2b0
[ 8451.090952]  #2:  (slock-AF_INET){+.-...}, at: [<ffffffff855acda5>] sk_clone_lock+0x1c5/0x500
[ 8451.090958]
[ 8451.090958] stack backtrace:
[ 8451.090960] CPU: 7 PID: 214795 Comm: socket_sockopt_

[ 8451.091215] Call Trace:
[ 8451.091216]  <IRQ>  [<ffffffff856fb29c>] dump_stack+0x55/0x76
[ 8451.091229]  [<ffffffff85123b5b>] lockdep_rcu_suspicious+0xeb/0x110
[ 8451.091235]  [<ffffffff8564544f>] tcp_md5_do_add+0x1bf/0x1e0
[ 8451.091239]  [<ffffffff85645751>] tcp_v4_syn_recv_sock+0x1f1/0x4c0
[ 8451.091242]  [<ffffffff85642b27>] ? tcp_v4_md5_hash_skb+0x167/0x190
[ 8451.091246]  [<ffffffff85647c78>] tcp_check_req+0x3c8/0x500
[ 8451.091249]  [<ffffffff856451ae>] ? tcp_v4_inbound_md5_hash+0x11e/0x190
[ 8451.091253]  [<ffffffff85647170>] tcp_v4_rcv+0x3c0/0x9f0
[ 8451.091256]  [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0
[ 8451.091260]  [<ffffffff856181b6>] ip_local_deliver_finish+0xb6/0x2b0
[ 8451.091263]  [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0
[ 8451.091267]  [<ffffffff85618d38>] ip_local_deliver+0x48/0x80
[ 8451.091270]  [<ffffffff85618510>] ip_rcv_finish+0x160/0x700
[ 8451.091273]  [<ffffffff8561900e>] ip_rcv+0x29e/0x3d0
[ 8451.091277]  [<ffffffff855c74b7>] __netif_receive_skb_core+0xb47/0xe90

Fixes: a8afca03 ("tcp: md5: protects md5sig_info with RCU")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 68242a5a ]

Thomas reports
"
4gsystems sells two total different LTE-surfsticks under the same name.
..
The newer version of XS Stick W100 is from "omega"
..
Under windows the driver switches to the same ID, and uses MI03\6 for
network and MI01\6 for modem.
..
echo "1c9e 9b01" > /sys/bus/usb/drivers/qmi_wwan/new_id
echo "1c9e 9b01" > /sys/bus/usb-serial/drivers/option1/new_id

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=9b01 Rev=02.32
S:  Manufacturer=USB Modem
S:  Product=USB Modem
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Now all important things are there:

wwp0s29f7u2i3 (net), ttyUSB2 (at), cdc-wdm0 (qmi), ttyUSB1 (at)

There is also ttyUSB0, but it is not usable, at least not for at.

The device works well with qmi and ModemManager-NetworkManager.
"
Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 41033f02 ]

the OUTMCAST stat is double incremented, getting bumped once in the mcast code
itself, and again in the common ip output path.  Remove the mcast bump, as its
not needed

Validated by the reporter, with good results
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Claus Jensen <claus.jensen@microsemi.com>
CC: Claus Jensen <claus.jensen@microsemi.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ed5a377d ]

now sctp auth cannot work well when setting a hmacid manually, which
is caused by that we didn't use the network order for hmacid, so fix
it by adding the transformation in sctp_auth_ep_set_hmacs.

even we set hmacid with the network order in userspace, it still
can't work, because of this condition in sctp_auth_ep_set_hmacs():

		if (id > SCTP_AUTH_HMAC_ID_MAX)
			return -EOPNOTSUPP;

so this wasn't working before and thus it won't break compatibility.

Fixes: 65b07e5d ("[SCTP]: API updates to suport SCTP-AUTH extensions.")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7d267278 ]

Rainer Weikusat <rweikusat@mobileactivedefense.com> writes:
An AF_UNIX datagram socket being the client in an n:1 association with
some server socket is only allowed to send messages to the server if the
receive queue of this socket contains at most sk_max_ack_backlog
datagrams. This implies that prospective writers might be forced to go
to sleep despite none of the message presently enqueued on the server
receive queue were sent by them. In order to ensure that these will be
woken up once space becomes again available, the present unix_dgram_poll
routine does a second sock_poll_wait call with the peer_wait wait queue
of the server socket as queue argument (unix_dgram_recvmsg does a wake
up on this queue after a datagram was received). This is inherently
problematic because the server socket is only guaranteed to remain alive
for as long as the client still holds a reference to it. In case the
connection is dissolved via connect or by the dead peer detection logic
in unix_dgram_sendmsg, the server socket may be freed despite "the
polling mechanism" (in particular, epoll) still has a pointer to the
corresponding peer_wait queue. There's no way to forcibly deregister a
wait queue with epoll.

Based on an idea by Jason Baron, the patch below changes the code such
that a wait_queue_t belonging to the client socket is enqueued on the
peer_wait queue of the server whenever the peer receive queue full
condition is detected by either a sendmsg or a poll. A wake up on the
peer queue is then relayed to the ordinary wait queue of the client
socket via wake function. The connection to the peer wait queue is again
dissolved if either a wake up is about to be relayed or the client
socket reconnects or a dead peer is detected or the client socket is
itself closed. This enables removing the second sock_poll_wait from
unix_dgram_poll, thus avoiding the use-after-free, while still ensuring
that no blocked writer sleeps forever.
Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Fixes: ec0d215f ("af_unix: fix 'poll for write'/connected DGRAM sockets")
Reviewed-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a91e627e upstream.

One of the many faults of the QinHeng CH345 USB MIDI interface chip is
that it does not handle received SysEx messages correctly -- every second
event packet has a wrong code index number, which is the one from the last
seen message, instead of 4.  For example, the two messages "FE F0 01 02 03
04 05 06 07 08 09 0A 0B 0C 0D 0E F7" result in the following event
packets:

correct:       CH345:
0F FE 00 00    0F FE 00 00
04 F0 01 02    04 F0 01 02
04 03 04 05    0F 03 04 05
04 06 07 08    04 06 07 08
04 09 0A 0B    0F 09 0A 0B
04 0C 0D 0E    04 0C 0D 0E
05 F7 00 00    05 F7 00 00

A class-compliant driver must interpret an event packet with CIN 15 as
having a single data byte, so the other two bytes would be ignored.  The
message received by the host would then be missing two bytes out of six;
in this example, "F0 01 02 03 06 07 08 09 0C 0D 0E F7".

These corrupted SysEx event packages contain only data bytes, while the
CH345 uses event packets with a correct CIN value only for messages with
a status byte, so it is possible to distinguish between these two cases by
checking for the presence of this status byte.

(Other bugs in the CH345's input handling, such as the corruption resulting
from running status, cannot be worked around.)
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1ca8b201 upstream.

The CH345 USB MIDI chip has two output ports.  However, they are
multiplexed through one pin, and the number of ports cannot be reduced
even for hardware that implements only one connector, so for those
devices, data sent to either port ends up on the same hardware output.
This becomes a problem when both ports are used at the same time, as
longer MIDI commands (such as SysEx messages) are likely to be
interrupted by messages from the other port, and thus to get lost.

It would not be possible for the driver to detect how many ports the
device actually has, except that in practice, _all_ devices built with
the CH345 have only one port.  So we can just ignore the device's
descriptors, and hardcode one output port.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 98d362be upstream.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 638148e2 upstream.

Thomas reports
"
4gsystems sells two total different LTE-surfsticks under the same name.
..
The newer version of XS Stick W100 is from "omega"
..
Under windows the driver switches to the same ID, and uses MI03\6 for
network and MI01\6 for modem.
..
echo "1c9e 9b01" > /sys/bus/usb/drivers/qmi_wwan/new_id
echo "1c9e 9b01" > /sys/bus/usb-serial/drivers/option1/new_id

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=9b01 Rev=02.32
S:  Manufacturer=USB Modem
S:  Product=USB Modem
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Now all important things are there:

wwp0s29f7u2i3 (net), ttyUSB2 (at), cdc-wdm0 (qmi), ttyUSB1 (at)

There is also ttyUSB0, but it is not usable, at least not for at.

The device works well with qmi and ModemManager-NetworkManager.
"
Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e07af133 upstream.

Also known as Verizon U620L.

The device is modeswitched from 1410:9020 to 1410:9022 by selecting the
4th USB configuration:

 $ sudo usb_modeswitch –v 0x1410 –p 0x9020 –u 4

This configuration provides a ECM interface as well as TTYs ('Enterprise
Mode' according to the U620 Linux integration guide).
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 705e63d2 upstream.

There is a bit of a mess in the order of arguments to the ulpi write
callback. There is

	int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val)

in drivers/usb/common/ulpi.c;

	struct usb_phy_io_ops {
		...
		int (*write)(struct usb_phy *x, u32 val, u32 reg);
	}

in include/linux/usb/phy.h.

The callback registered by the musb driver has to comply to the latter,
but up to now had "offset" first which effectively made the function
broken for correct users. So flip the order and while at it also
switch to the parameter names of struct usb_phy_io_ops's write.

Fixes: ffb865b1 ("usb: musb: add ulpi access operations")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 19cd80a2 upstream.

It is not permitted to set task state before lock. usblp_wwait sets
the state to TASK_INTERRUPTIBLE and calls mutex_lock_interruptible.
Upon return from that function, the state will be TASK_RUNNING again.

This is clearly a bug and a warning is generated with LOCKDEP too:
WARNING: CPU: 1 PID: 5109 at kernel/sched/core.c:7404 __might_sleep+0x7d/0x90()
do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffa0c588d0>] usblp_wwait+0xa0/0x310 [usblp]
Modules linked in: ...
CPU: 1 PID: 5109 Comm: captmon Tainted: G        W       4.2.5-0.gef2823b-default #1
Hardware name: LENOVO 23252SG/23252SG, BIOS G2ET33WW (1.13 ) 07/24/2012
 ffffffff81a4edce ffff880236ec7ba8 ffffffff81716651 0000000000000000
 ffff880236ec7bf8 ffff880236ec7be8 ffffffff8106e146 0000000000000282
 ffffffff81a50119 000000000000028b 0000000000000000 ffff8802dab7c508
Call Trace:
...
 [<ffffffff8106e1c6>] warn_slowpath_fmt+0x46/0x50
 [<ffffffff8109a8bd>] __might_sleep+0x7d/0x90
 [<ffffffff8171b20f>] mutex_lock_interruptible_nested+0x2f/0x4b0
 [<ffffffffa0c588fc>] usblp_wwait+0xcc/0x310 [usblp]
 [<ffffffffa0c58bb2>] usblp_write+0x72/0x350 [usblp]
 [<ffffffff8121ed98>] __vfs_write+0x28/0xf0
...

Commit 7f477358 (usblp: Implement the
ENOSPC convention) moved the set prior locking. So move it back after
the lock.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Fixes: 7f477358 ("usblp: Implement the ENOSPC convention")
Acked-By: Pete Zaitcev <zaitcev@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5accd17d upstream.

For reasons not entirely apparent, but now enshrined in history, the
architectural mapping of AArch32 banked registers to AArch64 registers
actually orders SP_<mode> and LR_<mode> backwards compared to the
intuitive r13/r14 order, for all modes except FIQ.

Fix the compat_<reg>_<mode> macros accordingly, in the hope of avoiding
subtle bugs with KVM and AArch32 guests.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7cecd9ab upstream.

According to SJA1000 data sheet error-warning (EI) interrupt is not
cleared by setting the controller in to reset-mode.

Then if we have the following case:
- system is suspended (echo mem > /sys/power/state) and SJA1000 is left
  in operating state
- A bus error condition occurs which activates EI interrupt, system is
  still suspended which means EI interrupt will be not be handled nor
  cleared.

If the above two events occur, on resume there is no way to return the
SJA1000 to operating state, except to cycle power to it.

By simply reading the IR register on start we will clear any previous
conditions that could be present.
Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com>
Reported-by: Christian Magnusson <Christian.Magnusson@semcon.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 660f0fc0 upstream.

The HIDP specs define an idle-timeout which automatically disconnects a
device. This has always been implemented in the HIDP layer and forced a
synchronous shutdown of the hidp-scheduler. This works just fine, but
lacks a forced disconnect on the underlying l2cap channels. This has been
broken since:

    commit 5205185d
    Author: David Herrmann <dh.herrmann@gmail.com>
    Date:   Sat Apr 6 20:28:47 2013 +0200

        Bluetooth: hidp: remove old session-management

The old session-management always forced an l2cap error on the ctrl/intr
channels when shutting down. The new session-management skips this, as we
don't want to enforce channel policy on the caller. In other words, if
user-space removes an HIDP device, the underlying channels (which are
*owned* and *referenced* by user-space) are still left active. User-space
needs to call shutdown(2) or close(2) to release them.

Unfortunately, this does not work with idle-timeouts. There is no way to
signal user-space that the HIDP layer has been stopped. The API simply
does not support any event-passing except for poll(2). Hence, we restore
old behavior and force EUNATCH on the sockets if the HIDP layer is
disconnected due to idle-timeouts (behavior of explicit disconnects
remains unmodified). User-space can still call

    getsockopt(..., SO_ERROR, ...)

..to retrieve the EUNATCH error and clear sk_err. Hence, the channels can
still be re-used (which nobody does so far, though). Therefore, the API
still supports the new behavior, but with this patch it's also compatible
to the old implicit channel shutdown.
Reported-by: Mark Haun <haunma@keteu.org>
Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1e6e6328 upstream.

This adds the USB ID for the Sitecom WLA2100. The Windows 10 inf file
was checked to verify that the addition is correct.
Reported-by: Frans van de Wiel <fvdw@fvdw.eu>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Frans van de Wiel <fvdw@fvdw.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1f9c6e1b upstream.

There were several bugs here.

1)  The done label was in the wrong place so we didn't copy any
    information out when there was no command given.

2)  We were using PAGE_SIZE as the size of the buffer instead of
    "PAGE_SIZE - pos".

3)  snprintf() returns the number of characters that would have been
    printed if there were enough space.  If there was not enough space
    (and we had fixed the memory corruption bug #2) then it would result
    in an information leak when we do simple_read_from_buffer().  I've
    changed it to use scnprintf() instead.

I also removed the initialization at the start of the function, because
I thought it made the code a little more clear.

Fixes: 5e6e3a92 ('wireless: mwifiex: initial commit for Marvell mwifiex driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>