1. 29 Jun, 2017 40 commits
    • Goran Ferenc's avatar
      MIPS: VDSO: Add implementation of gettimeofday() fallback · 0b523a85
      Goran Ferenc authored
      This patch adds gettimeofday_fallback() function that wraps assembly
      invocation of gettimeofday() syscall using __NR_gettimeofday.
      
      This function is used if pure VDSO implementation gettimeofday()
      does not succeed for any reason. Its imeplementation is enclosed in
      "#ifdef CONFIG_MIPS_CLOCK_VSYSCALL" to be in sync with the similar
      arrangement for __vdso_gettimeofday().
      
      If syscall invocation via __NR_gettimeofday fails, register a3 will
      be set. So, after the syscall, register a3 is tested and the return
      valuem is negated if it's set.
      Signed-off-by: default avatarGoran Ferenc <goran.ferenc@imgtec.com>
      Signed-off-by: default avatarMiodrag Dinic <miodrag.dinic@imgtec.com>
      Signed-off-by: default avatarAleksandar Markovic <aleksandar.markovic@imgtec.com>
      Cc: Douglas Leung <douglas.leung@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
      Cc: Raghu Gandham <raghu.gandham@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/16640/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      0b523a85
    • Goran Ferenc's avatar
      MIPS: VDSO: Add implementation of clock_gettime() fallback · 180902e0
      Goran Ferenc authored
      This patch adds clock_gettime_fallback() function that wraps assembly
      invocation of clock_gettime() syscall using __NR_clock_gettime.
      
      This function is used if pure VDSO implementation of clock_gettime()
      does not succeed for any reason. For example, it is called if the
      clkid parameter of clock_gettime() is not one of the clkids listed
      in the switch-case block of the function __vdso_clock_gettime()
      (one such case for clkid is CLOCK_BOOTIME).
      
      If syscall invocation via __NR_clock_gettime fails, register a3 will
      be set. So, after the syscall, register a3 is tested and the return
      value is negated if it's set.
      Signed-off-by: default avatarGoran Ferenc <goran.ferenc@imgtec.com>
      Signed-off-by: default avatarMiodrag Dinic <miodrag.dinic@imgtec.com>
      Signed-off-by: default avatarAleksandar Markovic <aleksandar.markovic@imgtec.com>
      Cc: Douglas Leung <douglas.leung@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
      Cc: Raghu Gandham <raghu.gandham@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/16639/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      180902e0
    • Goran Ferenc's avatar
      MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() · 8ec7f15b
      Goran Ferenc authored
      Fix incorrect calculation in do_monotonic() and do_monotonic_coarse()
      function that in turn caused incorrect values returned by the vdso
      version of system call clock_gettime() on mips64 if its system clock
      ID parameter was CLOCK_MONOTONIC or CLOCK_MONOTONIC_COARSE.
      
      Consider these variables and their types on mips32 and mips64:
      
      tk->wall_to_monotonic.tv_sec  s64, s64   (kernel/vdso.c)
      vdso_data.wall_to_mono_sec    u32, u32   (kernel/vdso.c)
      to_mono_sec                   u32, u32   (vdso/gettimeofday.c)
      ts->tv_sec                    s32, s64   (vdso/gettimeofday.c)
      
      For mips64 case, u32 vdso_data.wall_to_mono_sec variable is updated
      from the 64-bit signed variable tk->wall_to_monotonic.tv_sec
      (kernel/vdso.c:76) which is a negative number holding the time passed
      from 1970-01-01 to the time boot started. This 64-bit signed value is
      currently around 47+ years, in seconds. For instance, let this value
      be:
      
      -1489757461
      
      or
      
      11111111111111111111111111111111 10100111001101000001101011101011
      
      By updating 32-bit vdso_data.wall_to_mono_sec variable, we lose upper
      32 bits (signed 1's).
      
      to_mono_sec variable is a parameter of do_monotonic() and
      do_monotonic_coarse() functions which holds vdso_data.wall_to_mono_sec
      value. Its value needs to be added (or subtracted considering it holds
      negative value from the tk->wall_to_monotonic.tv_sec) to the current
      time passed from 1970-01-01 (ts->tv_sec), which is again something like
      47+ years, but increased by the time passed from the boot to the
      current time. ts->tv_sec is 32-bit long in case of 32-bit architecture
      and 64-bit long in case of 64-bit architecture. Consider the update of
      ts->tv_sec (vdso/gettimeofday.c:55 & 167):
      
      ts->tv_sec += to_mono_sec;
      
      mips32 case: This update will be performed correctly, since both
      ts->tv_sec and to_mono_sec are 32-bit long and the sign in to_mono_sec
      is preserved. Implicit conversion from u32 to s32 will be done
      correctly.
      
      mips64 case: This update will be wrong, since the implicit conversion
      will not be done correctly. The reason is that the conversion will be
      from u32 to s64. This is because to_mono_sec is 32-bit long for both
      mips32 and mips64 cases and s64..33 bits of converted to_mono_sec
      variable will be zeros.
      
      So, in order to make MIPS64 implementation work properly for
      MONOTONIC and MONOTONIC_COARSE clock ids on mips64, the size of
      wall_to_mono_sec variable in mips_vdso_data union and respective
      parameters in do_monotonic() and do_monotonic_coarse() functions
      should be changed from u32 to u64. Because of consistency, this
      size change from u32 and u64 is also done for wall_to_mono_nsec
      variable and corresponding function parameters.
      
      As far as similar situations for other architectures are concerned,
      let's take a look at arm. Arm has two distinct vdso_data structures
      for 32-bit & 64-bit cases, and arm's wall_to_mono_sec and
      wall_to_mono_nsec are u32 for 32-bit and u64 for 64-bit cases.
      On the other hand, MIPS has only one structure (mips_vdso_data),
      hence the need for changing the size of above mentioned parameters.
      Signed-off-by: default avatarGoran Ferenc <goran.ferenc@imgtec.com>
      Signed-off-by: default avatarMiodrag Dinic <miodrag.dinic@imgtec.com>
      Signed-off-by: default avatarAleksandar Markovic <aleksandar.markovic@imgtec.com>
      Cc: Douglas Leung <douglas.leung@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
      Cc: Raghu Gandham <raghu.gandham@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/16638/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      8ec7f15b
    • Paul Burton's avatar
      MIPS: Use current_cpu_type() in m4kc_tlbp_war() · 5f930860
      Paul Burton authored
      Use current_cpu_type() to check for 4Kc processors instead of checking
      the PRID directly. This will allow for the 4Kc case to be optimised out
      of kernels that can't run on 4KC processors, thanks to __get_cpu_type()
      and its unreachable() call.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16205/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      5f930860
    • Paul Burton's avatar
      MIPS: Allow storing pgd in C0_CONTEXT for MIPSr6 · cebf8c0f
      Paul Burton authored
      CONFIG_MIPS_PGD_C0_CONTEXT, which allows a pointer to the page directory
      to be stored in the cop0 Context register when enabled, was previously
      only allowed for MIPSr2. MIPSr6 is just as able to make use of it, so
      allow it there too.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16204/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      cebf8c0f
    • Paul Burton's avatar
      MIPS: Handle tlbex-tlbp race condition · f39878cc
      Paul Burton authored
      In systems where there are multiple actors updating the TLB, the
      potential exists for a race condition wherein a CPU hits a TLB exception
      but by the time it reaches a TLBP instruction the affected TLB entry may
      have been replaced. This can happen if, for example, a CPU shares the
      TLB between hardware threads (VPs) within a core and one of them
      replaces the entry that another has just taken a TLB exception for.
      
      We handle this race in the case of the Hardware Table Walker (HTW) being
      the other actor already, but didn't take into account the potential for
      multiple threads racing. Include the code for aborting TLB exception
      handling in affected multi-threaded systems, those being the I6400 &
      I6500 CPUs which share TLB entries between VPs.
      
      In the case of using RiXi without dedicated exceptions we have never
      handled this race even for HTW. This patch adds WARN()s to these cases
      which ought never to be hit because all CPUs with either HTW or shared
      FTLB RAMs also include dedicated RiXi exceptions, but the WARN()s will
      ensure this is always the case.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16203/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      f39878cc
    • Paul Burton's avatar
      MIPS: Add CPU shared FTLB feature detection · e7bc8557
      Paul Burton authored
      Some systems share FTLB RAMs or entries between sibling CPUs (ie.
      hardware threads, or VP(E)s, within a core). These properties require
      kernel handling in various places. As a start this patch introduces
      cpu_has_shared_ftlb_ram & cpu_has_shared_ftlb_entries feature macros
      which we set appropriately for I6400 & I6500 CPUs. Further patches will
      make use of these macros as appropriate.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16202/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      e7bc8557
    • Paul Burton's avatar
      MIPS: CPS: Handle spurious VP starts more gracefully · fa7a3b4a
      Paul Burton authored
      On pre-r6 systems with the MT ASE the CPS SMP code included checks to
      halt the VPE running mips_cps_boot_vpes() if its bit in the struct
      core_boot_config vpe_mask field is clear. This was largely done in order
      to allow us to start arbitrary VPEs within a core despite the fact that
      hardware is typically configured to run only VPE0 after powering up a
      core. VPE0 would start the desired other VPEs, halt itself, and the fact
      that VPE0 started would be largely hidden & irrelevant.
      
      In MIPSr6 multithreading we have control over which VPs start executing
      when a core powers up via the cores CPC registers accessed remotely
      through the redirect block. For this reason the MIPSr6 multithreading
      path in mips_cps_boot_vpes() hasn't bothered up until now to handle
      halting the VP running it.
      
      However it is possible to power up cores entirely in hardware by using a
      pwr_up pin associated with the core. Unfortunately some systems wire
      this pin to a logic 1, which means that it is possible for a core to
      power up at a point that software doesn't expect. The result is that we
      generally go execute the kernel on a CPU that ought not to be running &
      the results can be unpredictable.
      
      Handle this case by stopping VPs that we don't expect to be running in
      mips_cps_boot_vpes() - with this change even if a core powers up it will
      do nothing useful & all VPs within it will stop running before they
      proceed to run general kernel code & do any damage. Ideally we would
      produce some sort of warning here, but given the stage of core bringup
      this happens at that would be non-trivial. We also will only hit this if
      a core starts up after being offlined via hotplug, and when that happens
      we will already produce a warning that the CPU didn't power down in
      cps_cpu_die() which seems sufficient.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16198/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      fa7a3b4a
    • Paul Burton's avatar
      MIPS: CPS: Handle cores not powering down more gracefully · 4ad755c9
      Paul Burton authored
      If we get into a state where a core that ought to power down isn't doing
      so then the current result is that another CPU gets stuck inside
      cps_cpu_die() waiting for CPU that ought to be powering down to do so.
      The best case scenario is that we then trigger RCU stall messages or
      lockup messages, but neither makes it particularly clear what's
      happening.
      
      Handle this more gracefully by introducing a timeout beyond which we
      warn the user that the core didn't power down & stop waiting for it.
      This at least allows the CPU running cps_cpu_die() to continue normally,
      and hopefully presuming the CPU that powered back up is doing nothing
      harmful the system will continue functioning as normal.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16197/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      4ad755c9
    • Paul Burton's avatar
      MIPS: CPS: Prevent multi-core with dcache aliasing · 5570ba2e
      Paul Burton authored
      Systems using the MIPS Coherence Manager (CM) cannot support multi-core
      SMP with dcache aliasing. This is because CPU caches are VIPT, but
      interventions in CM-based systems provide only the physical address to
      remote caches. This means that interventions may behave incorrectly in
      the presence of an aliasing dcache, since the physical address used
      when handling an intervention may lead to operation on an aliased cache
      line rather than the correct line.
      
      Prevent us from running into this issue by refusing to boot secondary
      cores in systems where dcache aliasing may occur.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16196/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      5570ba2e
    • Paul Burton's avatar
      MIPS: CPS: Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 · c8b7712c
      Paul Burton authored
      Prior to MIPSr6 multithreading is only supported if CONFIG_MIPS_MT_SMP
      is enabled, so CONFIG_MIPS_MT_SMP selects CONFIG_SYS_SUPPORTS_SCHED_SMT.
      With MIPSr6 the CONFIG_MIPS_CPS SMP implementation always supports
      multithreading, so have it select CONFIG_SYS_SUPPORTS_SCHED_SMT in order
      to allow the scheduler to make better informed decisions on
      multithreaded MIPSr6 systems (for example those using I6400 or I6500
      CPUs).
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16195/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      c8b7712c
    • Paul Burton's avatar
      MIPS: CM: WARN on attempt to lock invalid VP, not BUG · 2f93a60c
      Paul Burton authored
      Rather than using BUG_ON in the case of an invalid attempt to lock
      access to a non-zero VP on a pre-CM3 system, use WARN_ON so that we have
      even the slightest chance of recovery.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16194/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      2f93a60c
    • Paul Burton's avatar
      MIPS: CM: Avoid per-core locking with CM3 & higher · 516db1c6
      Paul Burton authored
      CM3 provides a GCR_CL_OTHER register per VP, rather than only per core.
      This means that we don't need to prevent other VPs within a core from
      racing with code that makes use of the core-other register region.
      
      Reduce locking overhead by demoting the per-core spinlock providing
      protection for CM2.5 & lower to a per-CPU/per-VP spinlock for CM3 &
      higher.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16193/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      516db1c6
    • Paul Burton's avatar
      MIPS: Skip IPI setup if we only have 1 CPU · 9b03d8ab
      Paul Burton authored
      If we're running on a system with only 1 possible CPU then it makes no
      sense to reserve or initialise IPIs since we'll never use them. Avoid
      doing so.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16192/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      9b03d8ab
    • Maciej W. Rozycki's avatar
      MIPS: Use `pr_debug' for messages from `__compute_return_epc_for_insn' · f259fe29
      Maciej W. Rozycki authored
      Reduce the log level for branch emulation error messages issued before
      sending SIGILL by `__compute_return_epc_for_insn' as these are triggered
      by user software and are not an event that would normally require any
      attention.  The same signal sent from elsewhere does not actually leave
      any trace in the kernel log at all.
      Signed-off-by: default avatarMaciej W. Rozycki <macro@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16402/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      f259fe29
    • Maciej W. Rozycki's avatar
      MIPS: math-emu: For MFHC1/MTHC1 also return SIGILL right away · 70f743d1
      Maciej W. Rozycki authored
      Update commit 1ac94400 ("MIPS: math-emu: Add mfhc1 & mthc1
      support.") and like done throughout `cop1Emulate' for other cases also
      for the MFHC1 and MTHC1 instructions return SIGILL right away rather
      than jumping to a single `return' statement.
      Signed-off-by: default avatarMaciej W. Rozycki <macro@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16401/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      70f743d1
    • Maciej W. Rozycki's avatar
      MIPS: Fix a typo: s/preset/present/ in r2-to-r6 emulation error message · 27fe2200
      Maciej W. Rozycki authored
      This is a user-visible message, so we want it to be spelled correctly.
      
      Fixes: 5f9f41c4 ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6")
      Signed-off-by: default avatarMaciej W. Rozycki <macro@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: stable@vger.kernel.org # 3.19+
      Patchwork: https://patchwork.linux-mips.org/patch/16400/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      27fe2200
    • Maciej W. Rozycki's avatar
      MIPS: Send SIGILL for R6 branches in `__compute_return_epc_for_insn' · a60b1a5b
      Maciej W. Rozycki authored
      Fix:
      
      * commit 8467ca01 ("MIPS: Emulate the new MIPS R6 branch compact
      (BC) instruction"),
      
      * commit 84fef630 ("MIPS: Emulate the new MIPS R6 BALC
      instruction"),
      
      * commit 69b9a2fd ("MIPS: Emulate the new MIPS R6 BEQZC and JIC
      instructions"),
      
      * commit 28d6f93d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC
      instructions"),
      
      * commit c893ce38 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and
      BEQZALC instructions")
      
      and send SIGILL rather than returning -SIGILL for R6 branch and jump
      instructions.  Returning -SIGILL is never correct as the API defines
      this function's result upon error to be -EFAULT and a signal actually
      issued.
      
      Fixes: 8467ca01 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction")
      Fixes: 84fef630 ("MIPS: Emulate the new MIPS R6 BALC instruction")
      Fixes: 69b9a2fd ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions")
      Fixes: 28d6f93d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions")
      Fixes: c893ce38 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions")
      Signed-off-by: default avatarMaciej W. Rozycki <macro@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: stable@vger.kernel.org # 3.19+
      Patchwork: https://patchwork.linux-mips.org/patch/16399/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      a60b1a5b
    • Maciej W. Rozycki's avatar
      MIPS: Send SIGILL for linked branches in `__compute_return_epc_for_insn' · fef40be6
      Maciej W. Rozycki authored
      Fix commit 319824ea ("MIPS: kernel: branch: Do not emulate the
      branch likelies on MIPS R6") and also send SIGILL rather than returning
      -SIGILL for BLTZAL, BLTZALL, BGEZAL and BGEZALL instruction encodings no
      longer supported in R6, except where emulated.  Returning -SIGILL is
      never correct as the API defines this function's result upon error to be
      -EFAULT and a signal actually issued.
      
      Fixes: 319824ea ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6")
      Signed-off-by: default avatarMaciej W. Rozycki <macro@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: stable@vger.kernel.org # 3.19+
      Patchwork: https://patchwork.linux-mips.org/patch/16398/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      fef40be6
    • Maciej W. Rozycki's avatar
      MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn' · 1f4edde4
      Maciej W. Rozycki authored
      Use the more accurate `sigill_r2r6' name for the label used in the case
      of sending SIGILL in the absence of the instruction emulator for an
      earlier ISA level instruction that has been removed as from the R6 ISA,
      so that the `sigill_r6' name is freed for the situation where an R6
      instruction is not supposed to be interpreted, because the executing
      processor does not support the R6 ISA.
      Signed-off-by: default avatarMaciej W. Rozycki <macro@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: stable@vger.kernel.org # 3.19+
      Patchwork: https://patchwork.linux-mips.org/patch/16397/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      1f4edde4
    • Maciej W. Rozycki's avatar
      MIPS: Send SIGILL for BPOSGE32 in `__compute_return_epc_for_insn' · 7b82c105
      Maciej W. Rozycki authored
      Fix commit e50c0a8f ("Support the MIPS32 / MIPS64 DSP ASE.") and
      send SIGILL rather than SIGBUS whenever an unimplemented BPOSGE32 DSP
      ASE instruction has been encountered in `__compute_return_epc_for_insn'
      as our Reserved Instruction exception handler would in response to an
      attempt to actually execute the instruction.  Sending SIGBUS only makes
      sense for the unaligned PC case, since moved to `__compute_return_epc'.
      Adjust function documentation accordingly, correct formatting and use
      `pr_info' rather than `printk' as the other exit path already does.
      
      Fixes: e50c0a8f ("Support the MIPS32 / MIPS64 DSP ASE.")
      Signed-off-by: default avatarMaciej W. Rozycki <macro@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: stable@vger.kernel.org # 2.6.14+
      Patchwork: https://patchwork.linux-mips.org/patch/16396/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      7b82c105
    • Maciej W. Rozycki's avatar
      MIPS: Fix unaligned PC interpretation in `compute_return_epc' · 11a3799d
      Maciej W. Rozycki authored
      Fix a regression introduced with commit fb6883e5 ("MIPS: microMIPS:
      Support handling of delay slots.") and defer to `__compute_return_epc'
      if the ISA bit is set in EPC with non-MIPS16, non-microMIPS hardware,
      which will then arrange for a SIGBUS due to an unaligned instruction
      reference.  Returning EPC here is never correct as the API defines this
      function's result to be either a negative error code on failure or one
      of 0 and BRANCH_LIKELY_TAKEN on success.
      
      Fixes: fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.")
      Signed-off-by: default avatarMaciej W. Rozycki <macro@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: stable@vger.kernel.org # 3.9+
      Patchwork: https://patchwork.linux-mips.org/patch/16395/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      11a3799d
    • Maciej W. Rozycki's avatar
      MIPS: Actually decode JALX in `__compute_return_epc_for_insn' · a9db101b
      Maciej W. Rozycki authored
      Complement commit fb6883e5 ("MIPS: microMIPS: Support handling of
      delay slots.") and actually decode the regular MIPS JALX major
      instruction opcode, the handling of which has been added with the said
      commit for EPC calculation in `__compute_return_epc_for_insn'.
      
      Fixes: fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.")
      Signed-off-by: default avatarMaciej W. Rozycki <macro@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: stable@vger.kernel.org # 3.9+
      Patchwork: https://patchwork.linux-mips.org/patch/16394/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      a9db101b
    • Maciej W. Rozycki's avatar
      MIPS: math-emu: Prevent wrong ISA mode instruction emulation · 13769eba
      Maciej W. Rozycki authored
      Terminate FPU emulation immediately whenever an ISA mode switch has been
      observed.  This is so that we do not interpret machine code in the wrong
      mode, for example when a regular MIPS FPU instruction has been placed in
      a delay slot of a jump that switches into the MIPS16 mode, as with the
      following code (taken from a GCC test suite case):
      
      00400650 <set_fast_math>:
        400650:	3c020100 	lui	v0,0x100
        400654:	03e00008 	jr	ra
        400658:	44c2f800 	ctc1	v0,c1_fcsr
        40065c:	00000000 	nop
      
      [...]
      
      004012d0 <__libc_csu_init>:
        4012d0:	f000 6a02 	li	v0,2
        4012d4:	f150 0b1c 	la	v1,3f9430 <_DYNAMIC-0x6df0>
        4012d8:	f400 3240 	sll	v0,16
        4012dc:	e269      	addu	v0,v1
        4012de:	659a      	move	gp,v0
        4012e0:	f00c 64f6 	save	a0-a2,48,ra,s0-s1
        4012e4:	673c      	move	s1,gp
        4012e6:	f010 9978 	lw	v1,-32744(s1)
        4012ea:	d204      	sw	v0,16(sp)
        4012ec:	eb40      	jalr	v1
        4012ee:	653b      	move	t9,v1
        4012f0:	f010 997c 	lw	v1,-32740(s1)
        4012f4:	f030 9920 	lw	s1,-32736(s1)
        4012f8:	e32f      	subu	v1,s1
        4012fa:	326b      	sra	v0,v1,2
        4012fc:	d206      	sw	v0,24(sp)
        4012fe:	220c      	beqz	v0,401318 <__libc_csu_init+0x48>
        401300:	6800      	li	s0,0
        401302:	99e0      	lw	a3,0(s1)
        401304:	4801      	addiu	s0,1
        401306:	960e      	lw	a2,56(sp)
        401308:	4904      	addiu	s1,4
        40130a:	950d      	lw	a1,52(sp)
        40130c:	940c      	lw	a0,48(sp)
        40130e:	ef40      	jalr	a3
        401310:	653f      	move	t9,a3
        401312:	9206      	lw	v0,24(sp)
        401314:	ea0a      	cmp	v0,s0
        401316:	61f5      	btnez	401302 <__libc_csu_init+0x32>
        401318:	6476      	restore	48,ra,s0-s1
        40131a:	e8a0      	jrc	ra
      
      Here `set_fast_math' is called from `40130e' (`40130f' with the ISA bit)
      and emulation triggers for the CTC1 instruction.  As it is in a jump
      delay slot emulation continues from `401312' (`401313' with the ISA
      bit).  However we have no path to handle MIPS16 FPU code emulation,
      because there are no MIPS16 FPU instructions.  So the default emulation
      path is taken, interpreting a 32-bit word fetched by `get_user' from
      `401313' as a regular MIPS instruction, which is:
      
        401313:	f5ea0a92	sdc1	$f10,2706(t7)
      
      This makes the FPU emulator proceed with the supposed SDC1 instruction
      and consequently makes the program considered here terminate with
      SIGSEGV.
      
      A similar although less severe issue exists with pure-microMIPS
      processors in the case where similarly an FPU instruction is emulated in
      a delay slot of a register jump that (incorrectly) switches into the
      regular MIPS mode.  A subsequent instruction fetch from the jump's
      target is supposed to cause an Address Error exception, however instead
      we proceed with regular MIPS FPU emulation.
      
      For simplicity then, always terminate the emulation loop whenever a mode
      change is detected, denoted by an ISA mode bit flip.  As from commit
      377cb1b6 ("MIPS: Disable MIPS16/microMIPS crap for platforms not
      supporting these ASEs.") the result of `get_isa16_mode' can be hardcoded
      to 0, so we need to examine the ISA mode bit by hand.
      
      This complements commit 102cedc3 ("MIPS: microMIPS: Floating point
      support.") which added JALX decoding to FPU emulation.
      
      Fixes: 102cedc3 ("MIPS: microMIPS: Floating point support.")
      Signed-off-by: default avatarMaciej W. Rozycki <macro@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: stable@vger.kernel.org # 3.9+
      Patchwork: https://patchwork.linux-mips.org/patch/16393/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      13769eba
    • Paul Burton's avatar
      MIPS: Use queued spinlocks (qspinlock) · 0b17c967
      Paul Burton authored
      This patch switches MIPS to make use of generically implemented queued
      spinlocks, rather than the ticket spinlocks used previously. This allows
      us to drop a whole load of inline assembly, share more generic code, and
      is also a performance win.
      
      Results from running the AIM7 short workload on a MIPS Creator Ci40 (ie.
      2 core 2 thread interAptiv CPU clocked at 546MHz) with v4.12-rc4
      pistachio_defconfig, with ftrace disabled due to a current bug, and both
      with & without use of queued rwlocks & spinlocks:
      
        Forks | v4.12-rc4 | +qlocks  | Change
       -------|-----------|----------|--------
           10 | 52630.32  | 53316.31 | +1.01%
           20 | 51777.80  | 52623.15 | +1.02%
           30 | 51645.92  | 52517.26 | +1.02%
           40 | 51634.88  | 52419.89 | +1.02%
           50 | 51506.75  | 52307.81 | +1.02%
           60 | 51500.74  | 52322.72 | +1.02%
           70 | 51434.81  | 52288.60 | +1.02%
           80 | 51423.22  | 52434.85 | +1.02%
           90 | 51428.65  | 52410.10 | +1.02%
      
      The kernels used for these tests also had my "MIPS: Hardcode cpu_has_*
      where known at compile time due to ISA" patch applied, which allows the
      kernel_uses_llsc checks in cmpxchg() & xchg() to be optimised away at
      compile time.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16358/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      0b17c967
    • Paul Burton's avatar
      MIPS: Use queued read/write locks (qrwlock) · 25da4e9d
      Paul Burton authored
      This patch switches MIPS to make use of generically implemented queued
      read/write locks, rather than the custom implementation used previously.
      This allows us to drop a whole load of inline assembly, share more
      generic code, and is also a performance win.
      
      Results from running the AIM7 short workload on a MIPS Creator Ci40 (ie.
      2 core 2 thread interAptiv CPU clocked at 546MHz) with v4.12-rc4
      pistachio_defconfig, with ftrace disabled due to a current bug, and both
      with & without use of queued rwlocks & spinlocks:
      
        Forks | v4.12-rc4 | +qlocks  | Change
       -------|-----------|----------|--------
           10 | 52630.32  | 53316.31 | +1.01%
           20 | 51777.80  | 52623.15 | +1.02%
           30 | 51645.92  | 52517.26 | +1.02%
           40 | 51634.88  | 52419.89 | +1.02%
           50 | 51506.75  | 52307.81 | +1.02%
           60 | 51500.74  | 52322.72 | +1.02%
           70 | 51434.81  | 52288.60 | +1.02%
           80 | 51423.22  | 52434.85 | +1.02%
           90 | 51428.65  | 52410.10 | +1.02%
      
      The kernels used for these tests also had my "MIPS: Hardcode cpu_has_*
      where known at compile time due to ISA" patch applied, which allows the
      kernel_uses_llsc checks in cmpxchg() & xchg() to be optimised away at
      compile time.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16357/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      25da4e9d
    • Paul Burton's avatar
      MIPS: cmpxchg: Rearrange __xchg() arguments to match xchg() · 4843cf8d
      Paul Burton authored
      The __xchg() function declares its first 2 arguments in reverse order
      compared to the xchg() macro, which is confusing & serves no purpose.
      Reorder the arguments such that __xchg() & xchg() match.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16356/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      4843cf8d
    • Paul Burton's avatar
      MIPS: cmpxchg: Implement 1 byte & 2 byte cmpxchg() · 3ba7f44d
      Paul Burton authored
      Implement support for 1 & 2 byte cmpxchg() using read-modify-write atop
      a 4 byte cmpxchg(). This allows us to support these atomic operations
      despite the MIPS ISA only providing 4 & 8 byte atomic operations.
      
      This is required in order to support queued rwlocks (qrwlock) in a later
      patch, since these make use of a 1 byte cmpxchg() in their slow path.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16355/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      3ba7f44d
    • Paul Burton's avatar
      MIPS: cmpxchg: Implement 1 byte & 2 byte xchg() · b70eb300
      Paul Burton authored
      Implement 1 & 2 byte xchg() using read-modify-write atop a 4 byte
      cmpxchg(). This allows us to support these atomic operations despite the
      MIPS ISA only providing for 4 & 8 byte atomic operations.
      
      This is required in order to support queued spinlocks (qspinlock) in a
      later patch, since these make use of a 2 byte xchg() in their slow path.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16354/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      b70eb300
    • Paul Burton's avatar
      MIPS: cmpxchg: Implement __cmpxchg() as a function · 8263db4d
      Paul Burton authored
      Replace the macro definition of __cmpxchg() with an inline function,
      which is easier to read & modify. The cmpxchg() & cmpxchg_local() macros
      are adjusted to call the new __cmpxchg() function.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16353/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      8263db4d
    • Paul Burton's avatar
      MIPS: cmpxchg: Drop __xchg_u{32,64} functions · 62c6081d
      Paul Burton authored
      The __xchg_u32() & __xchg_u64() functions now add very little value.
      This patch therefore removes them, by:
      
        - Moving memory barriers out of them & into xchg(), which also removes
          the duplication & readies us to support xchg_relaxed() if we wish to.
      
        - Calling __xchg_asm() directly from __xchg().
      
        - Performing the check for CONFIG_64BIT being enabled in the size=8
          case of __xchg().
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16352/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      62c6081d
    • Paul Burton's avatar
      MIPS: cmpxchg: Error out on unsupported xchg() calls · d15dc68c
      Paul Burton authored
      xchg() has up until now simply returned the x parameter in cases where
      it is called with a pointer to a value of an unsupported size. This will
      often cause the calling code to hit a failure path, presuming that the
      value of x differs from the content of the memory pointed at by ptr, but
      we can do better by producing a compile-time or link-time error such
      that unsupported calls to xchg() are detectable earlier than runtime.
      
      This patch does this in the same was as is already done for cmpxchg(),
      using a call to a missing function annotated with __compiletime_error().
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16351/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      d15dc68c
    • Paul Burton's avatar
      MIPS: cmpxchg: Use __compiletime_error() for bad cmpxchg() pointers · 77299db8
      Paul Burton authored
      Our cmpxchg() implementation relies upon generating a call to a function
      which doesn't really exist (__cmpxchg_called_with_bad_pointer) to create
      a link failure in cases where cmpxchg() is called with a pointer to a
      value of an unsupported size.
      
      The __compiletime_error macro can be used to decorate a function such
      that a call to it generates a compile-time, rather than a link-time,
      error. This patch uses __compiletime_error to cause bad cmpxchg() calls
      to error out at compile time rather than link time, allowing errors to
      occur more quickly & making it easier to spot where the problem comes
      from.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16350/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      77299db8
    • Paul Burton's avatar
      MIPS: cmpxchg: Pull xchg() asm into a macro · 5154f3b4
      Paul Burton authored
      Use a macro to generate the 32 & 64 bit variants of the backing code for
      xchg(), much as is already done for cmpxchg(). This removes the
      duplication that could previously be found in __xchg_u32() &
      __xchg_u64().
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16349/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      5154f3b4
    • Paul Burton's avatar
      MIPS: cmpxchg: Unify R10000_LLSC_WAR & non-R10000_LLSC_WAR cases · 6b1e7629
      Paul Burton authored
      Prior to this patch the xchg & cmpxchg functions have duplicated code
      which is for all intents & purposes identical apart from use of a
      branch-likely instruction in the R10000_LLSC_WAR case & a regular branch
      instruction in the non-R10000_LLSC_WAR case.
      
      This patch removes the duplication, declaring a __scbeqz macro to select
      the branch instruction suitable for use when checking the result of an
      sc instruction & making use of it to unify the 2 cases.
      
      In __xchg_u{32,64}() this means writing the branch in asm, where it was
      previously being done in C as a do...while loop for the
      non-R10000_LLSC_WAR case. As this is a single instruction, and adds
      consistency with the R10000_LLSC_WAR cases & the cmpxchg() code, this
      seems worthwhile.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16348/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      6b1e7629
    • Miodrag Dinic's avatar
      MIPS: unaligned: Add DSP lwx & lhx missaligned access support · 3f88ec63
      Miodrag Dinic authored
      Add handling of missaligned access for DSP load instructions
      lwx & lhx.
      
      Since DSP instructions share SPECIAL3 opcode with other non-DSP
      instructions, necessary logic was inserted for distinguishing
      between instructions with SPECIAL3 opcode. For that purpose,
      the instruction format for DSP instructions is added to
      arch/mips/include/uapi/asm/inst.h.
      Signed-off-by: default avatarMiodrag Dinic <miodrag.dinic@imgtec.com>
      Signed-off-by: default avatarAleksandar Markovic <aleksandar.markovic@imgtech.com>
      Cc: James.Hogan@imgtec.com
      Cc: Paul.Burton@imgtec.com
      Cc: Raghu.Gandham@imgtec.com
      Cc: Leonid.Yegoshin@imgtec.com
      Cc: Douglas.Leung@imgtec.com
      Cc: Petar.Jovanovic@imgtec.com
      Cc: Goran.Ferenc@imgtec.com
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16511/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      3f88ec63
    • Leonid Yegoshin's avatar
      MIPS: R6: Fix PREF instruction usage by memcpy for MIPS R6 · 3daf281f
      Leonid Yegoshin authored
      Disable usage of PREF instruction usage by memcpy for MIPS R6.
      
      MIPS R6 redefines PREF instruction with smaller offset than
      ordinary MIPS. However, the memcpy code uses PREF instruction
      with offsets bigger than +-256 bytes.
      
      Malta kernels already disable usage of PREF for memcpy.
      
      This was found during adaptation of MIPS R6 for virtual board
      used by Android emulator.
      Signed-off-by: default avatarLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>
      Signed-off-by: default avatarMiodrag Dinic <miodrag.dinic@imgtec.com>
      Signed-off-by: default avatarGoran Ferenc <goran.ferenc@imgtec.com>
      Signed-off-by: default avatarAleksandar Markovic <aleksandar.markovic@imgtech.com>
      Cc: James.Hogan@imgtec.com
      Cc: Paul.Burton@imgtec.com
      Cc: Raghu.Gandham@imgtec.com
      Cc: Leonid.Yegoshin@imgtec.com
      Cc: Douglas.Leung@imgtec.com
      Cc: Petar.Jovanovic@imgtec.com
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16510/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      3daf281f
    • Miodrag Dinic's avatar
      MIPS: build: Fix "-modd-spreg" switch usage when compiling for mips32r6 · 21855a6e
      Miodrag Dinic authored
      Add "-modd-spreg" when compiling the kernel for mips32r6 target.
      
      This makes sure the kernel builds properly even with toolchains that
      use "-mno-odd-spreg" by default. This is the case with Android gcc.
      Prior to this patch, kernel builds using gcc for Android failed with
      following error messages, if target architecture is set to mips32r6:
      
      arch/mips/kernel/r4k_switch.S: Assembler messages:
      .../r4k_switch.S:210: Error: float register should be even, was 1
      .../r4k_switch.S:212: Error: float register should be even, was 3
      .../r4k_switch.S:214: Error: float register should be even, was 5
      .../r4k_switch.S:216: Error: float register should be even, was 7
      .../r4k_switch.S:218: Error: float register should be even, was 9
      .../r4k_switch.S:220: Error: float register should be even, was 11
      .../r4k_switch.S:222: Error: float register should be even, was 13
      .../r4k_switch.S:224: Error: float register should be even, was 15
      .../r4k_switch.S:226: Error: float register should be even, was 17
      .../r4k_switch.S:228: Error: float register should be even, was 19
      .../r4k_switch.S:230: Error: float register should be even, was 21
      .../r4k_switch.S:232: Error: float register should be even, was 23
      .../r4k_switch.S:234: Error: float register should be even, was 25
      .../r4k_switch.S:236: Error: float register should be even, was 27
      .../r4k_switch.S:238: Error: float register should be even, was 29
      .../r4k_switch.S:240: Error: float register should be even, was 31
      make[2]: *** [arch/mips/kernel/r4k_switch.o] Error 1
      Signed-off-by: default avatarMiodrag Dinic <miodrag.dinic@imgtec.com>
      Signed-off-by: default avatarGoran Ferenc <goran.ferenc@imgtec.com>
      Signed-off-by: default avatarAleksandar Markovic <aleksandar.markovic@imgtec.com>
      Cc: James.Hogan@imgtec.com
      Cc: Paul.Burton@imgtec.com
      Cc: Raghu.Gandham@imgtec.com
      Cc: Leonid.Yegoshin@imgtec.com
      Cc: Douglas.Leung@imgtec.com
      Cc: Petar.Jovanovic@imgtec.com
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16509/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      21855a6e
    • Miodrag Dinic's avatar
      MIPS: cmdline: Add support for 'memmap' parameter · 296a7624
      Miodrag Dinic authored
      Implement support for parsing 'memmap' kernel command line parameter.
      
      This patch covers parsing of the following two formats for 'memmap'
      parameter values:
      
        - nn[KMG]@ss[KMG]
        - nn[KMG]$ss[KMG]
      
        ([KMG] = K M or G (kilo, mega, giga))
      
      These two allowed formats for parameter value are already documented
      in file kernel-parameters.txt in Documentation/admin-guide folder.
      Some architectures already support them, but Mips did not prior to
      this patch.
      
      Excerpt from Documentation/admin-guide/kernel-parameters.txt:
      
      memmap=nn[KMG]@ss[KMG]
          [KNL] Force usage of a specific region of memory.
          Region of memory to be used is from ss to ss+nn.
      
      memmap=nn[KMG]$ss[KMG]
          Mark specific memory as reserved.
          Region of memory to be reserved is from ss to ss+nn.
          Example: Exclude memory from 0x18690000-0x1869ffff
              memmap=64K$0x18690000
              or
              memmap=0x10000$0x18690000
      
      There is no need to update this documentation file with respect to
      this patch.
      Signed-off-by: default avatarMiodrag Dinic <miodrag.dinic@imgtec.com>
      Signed-off-by: default avatarGoran Ferenc <goran.ferenc@imgtec.com>
      Signed-off-by: default avatarAleksandar Markovic <aleksandar.markovic@imgtec.com>
      Cc: James.Hogan@imgtec.com
      Cc: Paul.Burton@imgtec.com
      Cc: Raghu.Gandham@imgtec.com
      Cc: Leonid.Yegoshin@imgtec.com
      Cc: Douglas.Leung@imgtec.com
      Cc: Petar.Jovanovic@imgtec.com
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16508/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      296a7624
    • Huacai Chen's avatar
      MIPS: Loogson: Make enum loongson_cpu_type more clear · b9c4dc2c
      Huacai Chen authored
      Sort enum loongson_cpu_type in a more reasonable manner, this makes the
      CPU names more clear and extensible. Those already defined enum values
      are renamed to Legacy_* for compatibility.
      Signed-off-by: default avatarHuacai Chen <chenhc@lemote.com>
      Cc: John Crispin <john@phrozen.org>
      Cc: Steven J . Hill <Steven.Hill@cavium.com>
      Cc: Fuxin Zhang <zhangfx@lemote.com>
      Cc: Zhangjin Wu <wuzhangjin@gmail.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16591/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      b9c4dc2c