Merge tag 'integrator-for-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc

Merge "single Integrator patch" from Linus Walleij:

This sets up the dynamically detected IM-PD1 GPIO lines
by way of GPIO descriptors, avoiding any use of the GPIO
global numberspace.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'integrator-for-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: integrator: add MMCI device to IM-PD1

Merge tag 'renesas-clk-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Merge "Renesas ARM Based SoC Clk Updates for v3.18" from Simon Horman:

* Add r8a7794 support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-clk-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  clk: shmobile: Add r8a7794 support

Merge tag 'renesas-cleanup-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Merge "Renesas ARM Based SoC Cleanup Updates for v3.18" from Simon Horman:

* Remove Genmai board code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-cleanup-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r7s72100: Remove legacy board support
  ARM: shmobile: r7s72100: genmai: Remove legacy board file
  ARM: shmobile: r7s72100: genmai: Remove reference board file

Merge tag 'renesas-dt-timers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Merge "Renesas ARM Based SoC DT Timers Updates for v3.18" from Simon Horman:

* Enable timers using DT when booting boards without Legacy-C code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-dt-timers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: genmai-reference: Enable MTU2 in device tree
  ARM: shmobile: r7s72100: Add MTU2 device to DT
  ARM: shmobile: marzen-reference: Enable TMU0 in device tree
  ARM: shmobile: koelsch-reference: Enable CMT0 in device tree
  ARM: shmobile: lager-reference: Enable CMT0 in device tree
  ARM: shmobile: r8a7779: Add TMU devices to DT
  ARM: shmobile: r8a7791: Add CMT devices to DT
  ARM: shmobile: r8a7790: Add CMT devices to DT

Conflicts:
	arch/arm/mach-shmobile/setup-r8a7779.c

Merge tag 'renesas-r8a7740-ccf-and-timers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Merge "Renesas ARM Based SoC R8a7740 CCF and Timers Updates for v3.18" from Simon Horman:

When booting using the r8a7740/armadillo800eva using dt-reference:
* Use CCF to initialise clocks via DT
* Initialise timers via DT
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-r8a7740-ccf-and-timers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7740: Remove r8a7740_add_standard_devices_dt
  ARM: shmobile: armadillo800eva-reference: Do not use r8a7740_add_standard_devices_dt()
  ARM: shmobile: armadillo800eva-reference: Enable CMT1 in device tree
  ARM: shmobile: r8a7740: Add CMT1 device to DT
  ARM: shmobile: armadillo800eva-reference: add clock overrides to DTS
  ARM: shmobile: r8a7740: add MSTP clock assignments to DT
  ARM: shmobile: r8a7740: add SoC clocks to DTS
  ARM: shmobile: r8a7740: clock register bits

Merge tag 'renesas-soc2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Merge "Second Round Of Renesas ARM Based SoC Updates For v3.18" from Simon Horman:

* Move legacy INTC definitions from irqs.h to intc.h
* Remove duplicate CPUFreq bits on r8a73a0/ape6evm
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-soc2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Move legacy INTC definitions from irqs.h to intc.h
  ARM: shmobile: ape6evm: Remove duplicate CPUFreq bits
  ARM: shmobile: sh73a0: Remove duplicate CPUFreq bits

Merge tag 'renesas-init-delay-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Merge "Renesas ARM Based SoC Init Delay Updates For v3.18" from Simon Horman:

* Use shmobile_init_delay across a wider range of SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-init-delay-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: kzm9g: Use shmobile_init_delay()
  ARM: shmobile: bockw: Use shmobile_init_delay()
  ARM: shmobile: r8a7778: Use shmobile_init_delay()
  ARM: shmobile: sh73a0: Use shmobile_init_delay()
  ARM: shmobile: Remove shmobile_setup_delay()
  ARM: shmobile: r8a73a4: Use shmobile_init_delay()
  ARM: shmobile: sh7372: Use shmobile_init_delay()
  ARM: shmobile: r8a7778: Update DTS to include CPU frequency
  ARM: shmobile: sh73a0: Update DTS to include CPU frequency
  ARM: shmobile: sh7372: Update DTS to include CPU frequency
  ARM: shmobile: kzm9g-reference: Remove unneeded nr_irqs initialization
  ARM: shmobile: kzm9g: Remove unneeded nr_irqs initialization
  ARM: shmobile: marzen: Remove NR_IRQS_LEGACY
  ARM: shmobile: ape6evm: Use shmobile_init_delay()
  ARM: shmobile: ape6evm: Add shmobile_init_late()
  ARM: shmobile: bockw: Add shmobile_init_late()
  ARM: shmobile: marzen: Add shmobile_init_late()
  ARM: shmobile: kzm9g: Add shmobile_init_late()

Merge tag 'renesas-soc-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Merge "Renesas ARM Based SoC Updates for v3.18" from Simon Horman:

* Remove unnecessary nr_irqs initialisation on sh73a0, sh7372,
  and r8a7779 SoCs
* Use defines hardcoded numbers for DMA
* Rework multiplatform include workaround
* Correctly use shmobile_init_late on a wider range of SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-soc-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: sh73a0: Remove unneeded nr_irqs initialization
  ARM: shmobile: sh7372: Remove unneeded nr_irqs initialization
  ARM: shmobile: r8a7779: Remove NR_IRQS_LEGACY
  ARM: shmobile: dma: Use defines instead of hardcoded numbers
  ARM: shmobile: Rework multiplatform include workaround
  ARM: shmobile: r7s72100: Add shmobile_init_late()
  ARM: shmobile: r8a73a4: Add shmobile_init_late()
  ARM: shmobile: r8a7778: Fix shmobile_init_late()
  ARM: shmobile: r8a7779: Fix shmobile_init_late()
  ARM: shmobile: sh73a0: Add shmobile_init_late()
  ARM: shmobile: r8a7778: Add missing call to shmobile_init_late()

Add SOC BUS support with CPU family, machine name and unique ID.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Remove existing tricks for handling PWM and use CLPS711X PWM driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Now that r8a7740_add_standard_devices_dt() is simply a wrapper
for a call to of_platform_populate() remove it and call
of_platform_populate() directly.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Now that r8a7740_add_standard_devices_dt() is just a wrapper for
of_platform_populate() call the latter directly.

This is in preparation for removing r8a7740_add_standard_devices_dt().
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Based on work by Magnus Damm

Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add the CMT1 counters to the r8a7740 device tree and make it
disabled by default.

Based on work by Magnus Damm.

Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Assigns clocks to ether, i2c*, scif*, tpu, mmcif0, sdhi*, and fsi2.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Declares the r8a7740 clocks supported by the legacy clock framework,
excluding those requiring extensions to the DIV6 driver.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Contains the header file with the clock pulse generator and MSTP bits.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Move all definitions for legacy INTC from the common "irqs.h" to the
INTC-specific "intc.h".
Include "intc.h" in sh7372/sh73a0 CPU and board files where needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
[horms+renesas@verge.net.au: omitted whitespace change]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The CPUFreq platform device is already registered by
shmobile_init_late(), so get rid of ape6evm specific bits.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The CPUFreq platform device is already registered by
shmobile_init_late(), so get rid of sh73a0 specific bits.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Adjust the KZM9G board support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Adjust the BockW board support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Adjust the r8a7778 SoC support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS. Get rid of the
C code version.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Adjust the sh73a0 SoC support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS. Get rid of the
C code version.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

All ARM mach-shmobile SoCs and boards now rely on DTS for
CPU Frequency information, so remove the unused function
shmobile_setup_delay(). While at it, make the function
shmobile_setup_delay_hz() static.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Adjust the r8a73a4 SoC support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS. Get rid of the
C code version and r8a73a4_init_early() that now are unused.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Adjust the sh7372 SoC support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS. Get rid of the
C code version.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add CPU Frequency information to the r8a7778 DTS file. This
will allow us to use the shared C code on r8a7778 and BockW
which reads out the clock frequency from DT and calculates the
delay settings from there.

Also add other missing CPU information to the r8a7778 DTS.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add CPU Frequency information to the sh73a0 DTS file. This
will allow us to use the shared C code on sh73a0 and KZM9G
which reads out the clock frequency from DT and calculates the
delay settings from there.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add CPU Frequency information to the sh7372 DTS file. This
will allow us to use the shared C code on sh7372 and Mackerel
which reads out the clock frequency from DT and calculates the
delay settings from there.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

As per arch_probe_nr_irqs(), the default value is NR_IRQS, which maps to
NR_IRQS_LEGACY if CONFIG_SPARSE_IRQ=y.

Since SPARSE_IRQ is selected by both ARCH_MULTIPLATFORM and
ARCH_SHMOBILE_LEGACY, it's always enabled on shmobile.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

As per arch_probe_nr_irqs(), the default value is NR_IRQS, which maps to
NR_IRQS_LEGACY if CONFIG_SPARSE_IRQ=y.

Since SPARSE_IRQ is selected by both ARCH_MULTIPLATFORM and
ARCH_SHMOBILE_LEGACY, it's always enabled on shmobile.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Remove NR_IRQS_LEGACY from the r8a7779 generic machine
vector. The generic r8a7779 machine vector requires use
of Multiplatform, and in such case SPARSE_IRQ is enabled
by default. This in turns means that the default value
of .nr_irqs equals NR_IRQS and NR_IRQS_LEGACY. Because
of this we can simply remove NR_IRQS_LEGACY and move one
step closer to a cruft-free environment.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Now when the majority of the include files have moved from
arch/arm/mach-shmobile/include/mach/ to arch/arm/mach-shmobile/
remove the header include file workaround in the Makefile...

... and add another workaround in irqs.h to cope with the fact
that <mach/irqs.h> needs to be where it is until the PFC code
has been updated to remove legacy non-DT interfaces.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Extend r7s72100 SoC machine vector to include shmobile_init_late()
so Suspend-to-RAM and CPUIdle are setup as expected.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Extend r8a73a4 SoC machine vector to include shmobile_init_late()
so Suspend-to-RAM and CPUIdle are setup as expected.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>