- 28 Jun, 2018 40 commits
-
-
Akinobu Mita authored
The ov772x driver only works when the i2c controller have I2C_FUNC_PROTOCOL_MANGLING. However, many i2c controller drivers don't support it. The reason that the ov772x requires I2C_FUNC_PROTOCOL_MANGLING is that it doesn't support repeated starts. This changes the reading ov772x register method so that it doesn't require I2C_FUNC_PROTOCOL_MANGLING by calling two separated i2c messages. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Wolfram Sang <wsa@the-dreams.de> Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hugues Fruchet authored
Add support of module being physically mounted upside down. In this case, mirror and flip are enabled to fix captured images orientation. [Sakari Ailus: Use dev_fwnode() instead of accessing device's of_node] Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hugues Fruchet authored
Add the rotation property to the list of optional properties for the OV5640 camera sensor. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Hugues Fruchet authored
Add HFLIP/VFLIP controls support by setting registers REG21/REG20. Useless values in hardcoded mode sequences are removed and remaining binning values are now set after mode sequence being set. Note that due to BSI (Back Side Illuminated) technology, image capture is physically mirrored, mirror logic is so inversed in REG21 register to cancel this effect. Signed-off-by:
-
Sakari Ailus authored
Use the "rotation" property to tell that the sensor is mounted upside down. This reverses the behaviour of the VFLIP and HFLIP controls as well as the pixel order. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
-
Sakari Ailus authored
Add the rotation property to list of optional properties for the smia sensors. Signed-off-by:
-
Sakari Ailus authored
Sensors are occasionally mounted upside down to systems such as mobile phones or tablets. In order to use such a sensor without having to turn every image upside down, most camera sensors support reversing the readout order by setting both horizontal and vertical flipping. This patch documents the "rotation" property for camera sensors, mirroring what is defined for displays in Documentation/devicetree/bindings/display/panel/panel.txt . Signed-off-by:
-
Hans Verkuil authored
The __NEED_MEDIA_LEGACY_API define is 1) ugly and 2) dangerous since it is all too easy for drivers to define it to get hold of legacy defines. Instead just define what we need in media-device.c which is the only place where we need the legacy define (MEDIA_ENT_T_DEVNODE_UNKNOWN). Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Hans Verkuil authored
The ycbcr_enc, quantization and xfer_func fields are __u16 and not enums. Signed-off-by:
-
Hans Verkuil authored
Drop the '- .. row 1' lines to make it easier to add new rows to the tables in the future without having to renumber these lines. Signed-off-by:
-
Javier Martinez Canillas authored
This reverts commit 0866df8d. The v4l uAPI documentation [0] makes clear that in the case of interlaced video (i.e: field is V4L2_FIELD_ALTERNATE) the height refers to the number of lines in the field and not the number of lines in the full frame (which is twice the field height for interlaced formats). So the original height calculation was correct, and it shouldn't had been changed by the mentioned commit. [0]:https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/subdev-formats.html Fixes: 0866df8d ("[media] tvp5150: fix pad format frame height") Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by:
-
Ezequiel Garcia authored
It is not required to implement job_ready(). Since this one is dummy, we can drop it. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
Commit f1a81afc ("[media] m2m: fix bad unlock balance") removed the last use of v4l2_m2m_ops.lock and v4l2_m2m_ops.unlock hooks. They are not actually used anymore. Remove them. Signed-off-by:
-
Ezequiel Garcia authored
As per the documentation, job_abort is not required to wait until the current job finishes. It is redundant to do so, as the core will perform the wait operation. Remove the wait infrastructure completely. Signed-off-by:
Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by:
-
Ezequiel Garcia authored
Currently, rga_buf_start_streaming() is expecting pm_runtime_get_sync to return zero on success, which is wrong. As per the documentation, pm_runtime_get_sync increments the device's usage counter and return its result. This means it will typically return a positive integer on success and a negative error code. Therefore, rockchip-rga driver is currently unusable failing to start_streaming in most cases. Fix it and while here, cleanup the buffer return-to-core logic. Fixes: f7e7b48e ("[media] rockchip/rga: v4l2 m2m support") Signed-off-by:
-
Alexandre Courbot authored
When checking a format for validity, the resolution is reset to 1280x720 whenever the pixel format is not supported. This behavior can mislead user-space into believing that this is the only resolution supported, and looks strange considering that if we try/set the same format with just the pixel format changed to a valid one, the call will this time succeed without altering the resolution. Resolution is managed independently of the pixel format, so remove this reset. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Zhouyang Jia authored
When dvb_register_adapter fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling dvb_register_adapter. Signed-off-by:
Zhouyang Jia <jiazhouyang09@gmail.com> [hans.verkuil@cisco.com: use pr_err and fix typo: adater -> adapter] Signed-off-by:
-
Zhouyang Jia authored
When snd_ctl_add fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling snd_ctl_add. Signed-off-by:
-
Colin Ian King authored
The check for a zero retval is redundant as all paths that lead to this point have set retval to an error return value that is non-zero. Remove the redundant check. Detected by CoverityScan, CID#102589 ("Logically dead code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ezequiel Garcia authored
If there is a schedulable job, v4l2_m2m_try_schedule() calls v4l2_m2m_try_run(). This makes the unconditional v4l2_m2m_try_run() called by v4l2_m2m_job_finish superfluous. Remove it. Fixes: 7f98639d ("V4L/DVB: add memory-to-memory device helper framework for videobuf") Signed-off-by:
-
Anton Leontiev authored
Name is already initialized by assignment from rga_videodev. Signed-off-by:
Anton Leontiev <scileont@gmail.com> Signed-off-by:
-
Anton Leontiev authored
Name is already initialized by assignment from deinterlace_videodev. Signed-off-by:
-
Anton Leontiev authored
Name is already initialized by assignment from emmaprp_videodev. Signed-off-by:
-
Anton Leontiev authored
Name is already initialized by assignment from g2d_videodev. Signed-off-by:
-
Anton Leontiev authored
Name is already initialized by assignment from vpe_videodev. Signed-off-by:
-
Anton Leontiev authored
Name is already initialized by assignment from vim2m_videodev. Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in pr_notice message text Signed-off-by:
-
Steve Longerbeam authored
The ADV748x CSI-2 subdevices are HDMI/AFE to MIPI CSI-2 bridges. Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Acked-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Corentin Labbe authored
Those two files are unused since commit 486a7a28 ("[media] cx25821: remove cx25821-audio-upstream.c") and commit b6f21dc3 ("[media] cx25821: remove video output support") Remove them from tree. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Hugues Fruchet authored
Implements runtime & system sleep power management ops. Signed-off-by:
-
Nicholas Mc Guire authored
This does not fix any bug - this is just a code simplification. As np is not used after passing it to v4l2_fwnode_endpoint_parse() its refcount can be decremented immediately and at one location. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
-
Nicholas Mc Guire authored
The endpoint allocated by of_graph_get_next_endpoint() needs an of_node_put() in both error and success path. As ep is not used the refcount decrement can be right after the last use of ep. Fixes: commit 37404f91 ("[media] stm32-dcmi: STM32 DCMI camera interface driver") Signed-off-by:
-
Nicholas Mc Guire authored
The while(1) is effectively useless as all possible paths within it return thus there is no way to loop. Signed-off-by:
-
Hugues Fruchet authored
Do not wait for interrupt completion when stopping streaming, stopping sensor and disabling interruptions are enough. Signed-off-by:
-
Hugues Fruchet authored
Cleanup "active" field usage and enhance list management to avoid exceptions when releasing buffers on error or stopping streaming. Signed-off-by:
-
Hugues Fruchet authored
Introduce WAIT_FOR_BUFFER state instead of "active" field checking to manage buffer starvation case. Signed-off-by:
-
Hugues Fruchet authored
Return buffer to V4L2 in error state if DMA error occurs. Signed-off-by:
-
Hugues Fruchet authored
Return silently instead of falling into error when running out of available buffers when restarting capture. Capture will be restarted when new buffers will be provided by V4L2 client. Signed-off-by:
-
Hugues Fruchet authored
Minor non-functional fixes around comments, variable namings and trace point enhancement. Signed-off-by:
-
Hugues Fruchet authored
DCMI can capture 5Mp raw frames, increase limit accordingly. Signed-off-by:
-
