Pull timer updates from Ingo Molnar:
 "The main changes in this cycle were:

   - rework hrtimer expiry calculation in hrtimer_interrupt(): the
     previous code had a subtle bug where expiry caching would miss an
     expiry, resulting in occasional bogus (late) expiry of hrtimers.

   - continuing Y2038 fixes

   - ktime division optimization

   - misc smaller fixes and cleanups"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Make __hrtimer_get_next_event() static
  rtc: Convert rtc_set_ntp_time() to use timespec64
  rtc: Remove redundant rtc_valid_tm() from rtc_hctosys()
  rtc: Modify rtc_hctosys() to address y2038 issues
  rtc: Update rtc-dev to use y2038-safe time interfaces
  rtc: Update interface.c to use y2038-safe time interfaces
  time: Expose get_monotonic_boottime64 for in-kernel use
  time: Expose getboottime64 for in-kernel uses
  ktime: Optimize ktime_divns for constant divisors
  hrtimer: Prevent stale expiry time in hrtimer_interrupt()
  ktime.h: Introduce ktime_ms_delta

Pull scheduler updates from Ingo Molnar:
 "The main scheduler changes in this cycle were:

   - various sched/deadline fixes and enhancements

   - rescheduling latency fixes/cleanups

   - rework the rq->clock code to be more consistent and more robust.

   - minor micro-optimizations

   - ->avg.decay_count fixes

   - add a stack overflow check to might_sleep()

   - idle-poll handler fix, possibly resulting in power savings

   - misc smaller updates and fixes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/Documentation: Remove unneeded word
  sched/wait: Introduce wait_on_bit_timeout()
  sched: Pull resched loop to __schedule() callers
  sched/deadline: Remove cpu_active_mask from cpudl_find()
  sched: Fix hrtick_start() on UP
  sched/deadline: Avoid pointless __setscheduler()
  sched/deadline: Fix stale yield state
  sched/deadline: Fix hrtick for a non-leftmost task
  sched/deadline: Modify cpudl::free_cpus to reflect rd->online
  sched/idle: Add missing checks to the exit condition of cpu_idle_poll()
  sched: Fix missing preemption opportunity
  sched/rt: Reduce rq lock contention by eliminating locking of non-feasible target
  sched/debug: Print rq->clock_task
  sched/core: Rework rq->clock update skips
  sched/core: Validate rq_clock*() serialization
  sched/core: Remove check of p->sched_class
  sched/fair: Fix sched_entity::avg::decay_count initialization
  sched/debug: Fix potential call to __ffs(0) in sched_show_task()
  sched/debug: Check for stack overflow in ___might_sleep()
  sched/fair: Fix the dealing with decay_count in __synchronize_entity_decay()

Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - AMD range breakpoints support:

     Extend breakpoint tools and core to support address range through
     perf event with initial backend support for AMD extended
     breakpoints.

     The syntax is:

         perf record -e mem:addr/len:type

     For example set write breakpoint from 0x1000 to 0x1200 (0x1000 + 512)

         perf record -e mem:0x1000/512:w

   - event throttling/rotating fixes

   - various event group handling fixes, cleanups and general paranoia
     code to be more robust against bugs in the future.

    - kernel stack overhead fixes

  User-visible tooling side changes:

   - Show precise number of samples in at the end of a 'record' session,
     if processing build ids, since we will then traverse the whole
     perf.data file and see all the PERF_RECORD_SAMPLE records,
     otherwise stop showing the previous off-base heuristicly counted
     number of "samples" (Namhyung Kim).

   - Support to read compressed module from build-id cache (Namhyung
     Kim)

   - Enable sampling loads and stores simultaneously in 'perf mem'
     (Stephane Eranian)

   - 'perf diff' output improvements (Namhyung Kim)

   - Fix error reporting for evsel pgfault constructor (Arnaldo Carvalho
     de Melo)

  Tooling side infrastructure changes:

   - Cache eh/debug frame offset for dwarf unwind (Namhyung Kim)

   - Support parsing parameterized events (Cody P Schafer)

   - Add support for IP address formats in libtraceevent (David Ahern)

  Plus other misc fixes"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
  perf: Decouple unthrottling and rotating
  perf: Drop module reference on event init failure
  perf: Use POLLIN instead of POLL_IN for perf poll data in flag
  perf: Fix put_event() ctx lock
  perf: Fix move_group() order
  perf: Fix event->ctx locking
  perf: Add a bit of paranoia
  perf symbols: Convert lseek + read to pread
  perf tools: Use perf_data_file__fd() consistently
  perf symbols: Support to read compressed module from build-id cache
  perf evsel: Set attr.task bit for a tracking event
  perf header: Set header version correctly
  perf record: Show precise number of samples
  perf tools: Do not use __perf_session__process_events() directly
  perf callchain: Cache eh/debug frame offset for dwarf unwind
  perf tools: Provide stub for missing pthread_attr_setaffinity_np
  perf evsel: Don't rely on malloc working for sz 0
  tools lib traceevent: Add support for IP address formats
  perf ui/tui: Show fatal error message only if exists
  perf tests: Fix typo in sample-parsing.c
  ...

Pull core locking updates from Ingo Molnar:
 "The main changes are:

   - mutex, completions and rtmutex micro-optimizations
   - lock debugging fix
   - various cleanups in the MCS and the futex code"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Optimize setting task running after being blocked
  locking/rwsem: Use task->state helpers
  sched/completion: Add lock-free checking of the blocking case
  sched/completion: Remove unnecessary ->wait.lock serialization when reading completion state
  locking/mutex: Explicitly mark task as running after wakeup
  futex: Fix argument handling in futex_lock_pi() calls
  doc: Fix misnamed FUTEX_CMP_REQUEUE_PI op constants
  locking/Documentation: Update code path
  softirq/preempt: Add missing current->preempt_disable_ip update
  locking/osq: No need for load/acquire when acquire-polling
  locking/mcs: Better differentiate between MCS variants
  locking/mutex: Introduce ww_mutex_set_context_slowpath()
  locking/mutex: Move MCS related comments to proper location
  locking/mutex: Checking the stamp is WW only

Pull RCU updates from Ingo Molnar:
 "The main RCU changes in this cycle are:

   - Documentation updates.

   - Miscellaneous fixes.

   - Preemptible-RCU fixes, including fixing an old bug in the
     interaction of RCU priority boosting and CPU hotplug.

   - SRCU updates.

   - RCU CPU stall-warning updates.

   - RCU torture-test updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  rcu: Initialize tiny RCU stall-warning timeouts at boot
  rcu: Fix RCU CPU stall detection in tiny implementation
  rcu: Add GP-kthread-starvation checks to CPU stall warnings
  rcu: Make cond_resched_rcu_qs() apply to normal RCU flavors
  rcu: Optionally run grace-period kthreads at real-time priority
  ksoftirqd: Use new cond_resched_rcu_qs() function
  ksoftirqd: Enable IRQs and call cond_resched() before poking RCU
  rcutorture: Add more diagnostics in rcu_barrier() test failure case
  torture: Flag console.log file to prevent holdovers from earlier runs
  torture: Add "-enable-kvm -soundhw pcspk" to qemu command line
  rcutorture: Handle different mpstat versions
  rcutorture: Check from beginning to end of grace period
  rcu: Remove redundant rcu_batches_completed() declaration
  rcutorture: Drop rcu_torture_completed() and friends
  rcu: Provide rcu_batches_completed_sched() for TINY_RCU
  rcutorture: Use unsigned for Reader Batch computations
  rcutorture: Make build-output parsing correctly flag RCU's warnings
  rcu: Make _batches_completed() functions return unsigned long
  rcutorture: Issue warnings on close calls due to Reader Batch blows
  documentation: Fix smp typo in memory-barriers.txt
  ...

Pull regulator updates from Mark Brown:
 "This has not been a busy release for the regulator framework, though
  we do have the first parts of some ongoing work from Bjorn Andersson
  to allow us to support more complex modern systems with dynamic
  configuration of regulators in suspend and idle states.

   - Support for device-specific properties on regulator nodes when
     using simplified DT parsing in the core from Krzysztof Kozlowski.

   - Restructuring of the load tracking code, intended to support future
     improvements in this area for more complex system designs.

   - New drivers for Maxim MAX77843 and Mediatek MT6397.

   - Lots of smaller fixes and improvements"

* tag 'regulator-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (29 commits)
  regulator: max77843: Add max77843 regulator driver
  regulator: Fix build breakage on !REGULATOR
  regulator: Build sysfs entries with static attribute groups
  regulator: qcom-rpm: Make it possible to specify supply
  regulator: core: Consolidate drms update handling
  regulator: qcom-rpm: signedness bug in probe()
  regulator: da9211: Add gpio control for enable/disable of buck
  regulator: qcom_rpm: Don't update vreg->uV/mV if rpm_reg_write fails
  regulator: lp872x: Remove **regulators from struct lp872x
  regulator: da9211: fix unmatched of_node
  regulator: Update documentation after renaming function argument
  regulator: axp20x: Migrate to regulator core's simplified DT parsing code
  regulator: axp20x: Fill regulators_node and of_match descriptor fields
  regulator: pfuze100-regulator: add pfuze3000 support
  regulator: max77686: Document gpio properties
  regulator: Allow parsing custom properties when using simplified DT parsing
  regulator: max77686: Add GPIO control
  regulator: Copy config passed during registration
  regulator: tps65023: Constify struct regmap_config and regulator_ops
  regulator: max8649: Constify struct regmap_config and regulator_ops
  ...

Pull spi updates from Mark Brown:
 "The major highlight this release is a refactoring of the core to allow
  us to run synchronous transfers in the context of the caller when
  there is no contention for the bus.  This improves performance in the
  very common case by eliminating context switches and reducing the
  number of hardware setup and teardown operations we need to perform.

  Other changes:

   - New drivers for DLN-2 USB-SPI adapter and ST SPI controllers.

   - A big round of cleanups, performance and feature improvements for
     the xilinx driver from Ricardo Ribalda Delgado.

   - A wide range of smaller cleanups, fixes and feature improvements
     throughout the subsystem"

* tag 'spi-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (68 commits)
  spi: mxs: cleanup wait_for_completion return handling
  spi: ti-qspi: cleanup wait_for_completion return handling
  spi: spi-imx: cleanup wait_for_completion handling
  spi: sh-msiof: cleanup wait_for_completion return handling
  spi: match var type to return type of wait_for_completion
  spi: spi-pxa2xx: only include mach/dma.h for legacy DMA
  spi: atmel: cleanup wait_for_completion return handling
  spi: fsl-dspi: Remove possible memory leak of 'chip'
  spi: sh-msiof: Update calculation of frequency dividing
  spi: spidev: Convert buf pointers for 32-bit compat SPI_IOC_MESSAGE(n)
  spi/xilinx: Fix access invalid memory on xilinx_spi_tx
  spi: Revert "spi/xilinx: Remove iowrite/ioread wrappers"
  spi/xilinx: Check number of slaves range
  spi/xilinx: Use polling mode on small transfers
  spi/xilinx: Remove remaining_words driver data variable
  spi/xilinx: Remove iowrite/ioread wrappers
  spi/xilinx: Convert bits_per_word in bytes_per_word
  spi/xilinx: Convert remainding_bytes in remaining words
  spi/xilinx: Make spi_tx and spi_rx simmetric
  spi/xilinx: Remove rx_fn and tx_fn pointer
  ...

Pull regmap updates from Mark Brown:
 "A very quiet release for regmap this time around:

   - Fix an endianness issue for I2C devices connected via SMBus where
     we were getting two layers both trying to do endianness handling.
   - Use a union to reduce the size of the regmap struct.
   - A couple of smaller fixes"

* tag 'regmap-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix i2c word access when using SMBus access functions
  regmap: Export regmap_get_val_endian
  regmap: ac97: Clean up indentation
  regmap: correct the description of structure element in reg_field
  regmap: Move spinlock_flags into the union

Merge tag 'hwmon-for-linus-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "Explicit support for ina231 added to ina2xx driver.

  Minor improvements, cleanup and fixes in various drivers"

* tag 'hwmon-for-linus-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (tmp102) add hibernation callbacks
  hwmon: (ads2828) Only keep data in device data structure if needed
  hwmon: (ads2828) Convert to use regmap
  hwmon: (jc42) Allow negative hysteresis temperatures
  hwmon: (adc128d818) Do proper sign extension
  hwmon: (ad7314) Do proper sign extension
  hwmon: (abx500) Fix format string warnings
  hwmon: (jc42) Fix integer overflow when writing hysteresis value
  hwmon: (jc42) Fix integer overflow
  hwmon: (jc42) Use sign_extend32 for sign extension
  hwmon: (ina2xx) Add ina231 compatible string
  hwmon: (ina2xx) use DIV_ROUND_CLOSEST() to avoid rounding errors
  hwmon: (ina2xx) remove an unnecessary dev_get_drvdata() result check
  hwmon: (ina2xx) implement update_interval attribute for ina226
  hwmon: (ina2xx) make shunt resistance configurable at run-time
  hwmon: (ina2xx) don't accept shunt values greater than the calibration factor
  hwmon: (ina2xx) remove a stray new line
  hwmon: (ina2xx) reinitialize the chip in case it's been reset
  hwmon: (nct7802) Constify struct regmap_config

There was a bad typo in commit 43759d4f ("random: use an improved
fast_mix() function") and I didn't notice because it "looked right", so
I saw what I expected to see when I reviewed it.

Only months later did I look and notice it's not the Threefish-inspired
mix function that I had designed and optimized.

Mea Culpa.  Each input bit still has a chance to affect each output bit,
and the fast pool is spilled *long* before it fills, so it's not a total
disaster, but it's definitely not the intended great improvement.

I'm still working on finding better rotation constants.  These are good
enough, but since it's unrolled twice, it's possible to get better
mixing for free by using eight different constants rather than repeating
the same four.
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org  # v3.16+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull nios2 fix from Ley Foon Tan:
 "This fixes incorrect behavior of some user programs"

* tag 'nios2-fixes-v3.19-final' of git://git.rocketboards.org/linux-socfpga-next:
  nios2: fix unhandled signals

Pull aio nested sleep annotation from Ben LaHaise,

* git://git.kvack.org/~bcrl/aio-fixes:
  aio: annotate aio_read_event_ring for sleep patterns

Merge tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace fixes from Steven Rostedt:
 "During testing Sedat Dilek hit a "suspicious RCU usage" splat that
  pointed out a real bug.  During suspend and resume the tlb_flush
  tracepoint is called when the CPU is going offline.  As the CPU has
  been noted as offline, RCU is ignoring that CPU, which means that it
  can not use RCU protected locks.  When tracepoints are activated, they
  require RCU locking, and if RCU is ignoring a CPU that runs a
  tracepoint, there is a chance that the tracepoint could cause
  corruption.

  The solution was to change the tracepoint into a
  TRACE_EVENT_CONDITION() which allows us to check a condition to
  determine if the tracepoint should be called or not.  If the condition
  is not met, the rcu protected code will not be executed.  By adding
  the condition "cpu_online(smp_processor_id())", this will prevent the
  RCU protected code from being executed if the CPU is marked offline.

  After adding this, another bug was discovered.  As RCU checks rcu
  callers, if a rcu call is not done, there is no check (obviously).  We
  found that tracepoints could be added in RCU ignored locations and not
  have lockdep complain until the tracepoint is activated.  This missed
  places where tracepoints were added in places they should not have
  been.  To fix this, code was added in 3.18 that if lockdep is enabled,
  any tracepoint will still call the rcu checks even if the tracepoint
  is not enabled.  The bug here, is that the check does not take the
  CONDITION into account.  As the condition may prevent tracepoints from
  being activated in RCU ignored areas (as the one patch does), we get
  false positives when we enable lockdep and hit a tracepoint that the
  condition prevents it from being called in a RCU ignored location.

  The fix for this is to add the CONDITION to the rcu checks, even if
  the tracepoint is not enabled"

* tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  x86/tlb/trace: Do not trace on CPU that is offline
  tracing: Add condition check to RCU lockdep checks

Follow other architectures for user fault handling.
Signed-off-by: Chung-Ling Tang <cltang@codesourcery.com>
Acked-by: Ley Foon Tan <lftan@altera.com>

Merge remote-tracking branches 'spi/topic/sirf', 'spi/topic/spidev', 'spi/topic/st-ssc' and 'spi/topic/ti-qspi' into spi-next

Merge remote-tracking branches 'spi/topic/orion', 'spi/topic/pxa2xx', 'spi/topic/qup', 'spi/topic/rockchip' and 'spi/topic/samsung' into spi-next

Merge remote-tracking branches 'spi/topic/img-spfi', 'spi/topic/imx', 'spi/topic/inline', 'spi/topic/meson' and 'spi/topic/mxs' into spi-next

Merge remote-tracking branches 'spi/topic/falcon', 'spi/topic/fsf', 'spi/topic/fsl', 'spi/topic/fsl-dspi' and 'spi/topic/gpio' into spi-next

Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/config', 'spi/topic/dln2' and 'spi/topic/dw' into spi-next

spi: Fixes for v3.19

A couple of driver specific fixes:

 - Disable DMA mode for i.MX6DL chips due to a hardware bug.
 - Don't use devm_kzalloc() outside of bind/unbind paths in the fsl-dspi
   driver, fixing memory leaks.

# gpg: Signature made Thu 05 Feb 2015 05:06:57 HKT using RSA key ID 5D5487D0
# gpg: WARNING: digest algorithm MD5 is deprecated
# gpg: please see http://www.gnupg.org/faq/weak-digest-algos.html for more information
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: key AF88CD16: no public key for trusted key - skipped
# gpg: key AF88CD16 marked as ultimately trusted
# gpg: key 5621E907: no public key for trusted key - skipped
# gpg: key 5621E907 marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

Merge remote-tracking branches 'regulator/topic/rk808', 'regulator/topic/rpm', 'regulator/topic/rt5033' and 'regulator/topic/tps65023' into regulator-next

Merge remote-tracking branches 'regulator/topic/max8649', 'regulator/topic/mode', 'regulator/topic/mt6397', 'regulator/topic/pfuze100' and 'regulator/topic/qcom-rpm' into regulator-next

Merge remote-tracking branches 'regulator/topic/isl9305', 'regulator/topic/lp872x', 'regulator/topic/max14577', 'regulator/topic/max7686' and 'regulator/topic/max77843' into regulator-next

Merge remote-tracking branches 'regulator/topic/axp20x', 'regulator/topic/da9211' and 'regulator/topic/fan53555' into regulator-next

regulator: Fix !REGULATOR builds of systems using system suspend calls

The system suspend calls (used to synchronize between system suspend of
the CPU and it's PMIC) are called from board code but not stubbed when
regulator is disabled causing build failures in such cases.  This patch
fixes those build failures.

# gpg: Signature made Thu 05 Feb 2015 05:10:43 HKT using RSA key ID 5D5487D0
# gpg: WARNING: digest algorithm MD5 is deprecated
# gpg: please see http://www.gnupg.org/faq/weak-digest-algos.html for more information
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: key AF88CD16: no public key for trusted key - skipped
# gpg: key AF88CD16 marked as ultimately trusted
# gpg: key 5621E907: no public key for trusted key - skipped
# gpg: key 5621E907 marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

Merge remote-tracking branches 'regmap/topic/ac97', 'regmap/topic/doc' and 'regmap/topic/smbus' into regmap-next

When taking a CPU down for suspend and resume, a tracepoint may be called
when the CPU has been designated offline. As tracepoints require RCU for
protection, they must not be called if the current CPU is offline.

Unfortunately, trace_tlb_flush() is called in this scenario as was noted
by LOCKDEP:

...

 Disabling non-boot CPUs ...
 intel_pstate CPU 1 exiting

 ===============================
 smpboot: CPU 1 didn't die...
 [ INFO: suspicious RCU usage. ]
 3.19.0-rc7-next-20150204.1-iniza-small #1 Not tainted
 -------------------------------
 include/trace/events/tlb.h:35 suspicious rcu_dereference_check() usage!

 other info that might help us debug this:

 RCU used illegally from offline CPU!
 rcu_scheduler_active = 1, debug_locks = 0
 no locks held by swapper/1/0.

 stack backtrace:
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc7-next-20150204.1-iniza-small #1
 Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
  0000000000000001 ffff88011a44fe18 ffffffff817e370d 0000000000000011
  ffff88011a448290 ffff88011a44fe48 ffffffff810d6847 ffff8800c66b9600
  0000000000000001 ffff88011a44c000 ffffffff81cb3900 ffff88011a44fe78
 Call Trace:
  [<ffffffff817e370d>] dump_stack+0x4c/0x65
  [<ffffffff810d6847>] lockdep_rcu_suspicious+0xe7/0x120
  [<ffffffff810b71a5>] idle_task_exit+0x205/0x2c0
  [<ffffffff81054c4e>] play_dead_common+0xe/0x50
  [<ffffffff81054ca5>] native_play_dead+0x15/0x140
  [<ffffffff8102963f>] arch_cpu_idle_dead+0xf/0x20
  [<ffffffff810cd89e>] cpu_startup_entry+0x37e/0x580
  [<ffffffff81053e20>] start_secondary+0x140/0x150
 intel_pstate CPU 2 exiting

...

By converting the tlb_flush tracepoint to a TRACE_EVENT_CONDITION where the
condition is cpu_online(smp_processor_id()), we can avoid calling RCU protected
code when the CPU is offline.

Link: http://lkml.kernel.org/r/CA+icZUUGiGDoL5NU8RuxKzFjoLjEKRtUWx=JB8B9a0EQv-eGzQ@mail.gmail.com

Cc: stable@vger.kernel.org # 3.17+
Fixes: d17d8f9d "x86/mm: Add tracepoints for TLB flushes"
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Hansen <dave@sr71.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The trace_tlb_flush() tracepoint can be called when a CPU is going offline.
When a CPU is offline, RCU is no longer watching that CPU and since the
tracepoint is protected by RCU, it must not be called. To prevent the
tlb_flush tracepoint from being called when the CPU is offline, it was
converted to a TRACE_EVENT_CONDITION where the condition checks if the
CPU is online before calling the tracepoint.

Unfortunately, this was not enough to stop lockdep from complaining about
it. Even though the RCU protected code of the tracepoint will never be
called, the condition is hidden within the tracepoint, and even though the
condition prevents RCU code from being called, the lockdep checks are
outside the tracepoint (this is to test tracepoints even when they are not
enabled).

Even though tracepoints should be checked to be RCU safe when they are not
enabled, the condition should still be considered when checking RCU.

Link: http://lkml.kernel.org/r/CA+icZUUGiGDoL5NU8RuxKzFjoLjEKRtUWx=JB8B9a0EQv-eGzQ@mail.gmail.com

Fixes: 3a630178 "tracing: generate RCU warnings even when tracepoints are disabled"
Cc: stable@vger.kernel.org # 3.18+
Acked-by: Dave Hansen <dave@sr71.net>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull one more infiniband revert from Roland Dreier:
 "One more last-second RDMA change for 3.19: Yann realized that the
  previous revert of new userspace ABI did not go far enough, and we're
  still exposing a change that we don't want.  Revert even closer to
  3.18 interface to make sure we get things right in the long run"

Yann Droneaud pipes up:
 "I hope this could go in v3.19 as, at this stage, we don't want to
  expose any bits of this ABI in a released kernel"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  Revert "IB/core: Add support for extended query device caps"

Pull btrfs fix from Chris Mason:
 "Forrest Liu tracked down a missing blk_finish_plug in the btrfs
  logging code.  This isn't a new bug, and it's hard to hit.  But, it's
  safe enough for inclusion now, and in my for-linus branch"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: add missing blk_finish_plug in btrfs_sync_log()

Merge branches 'timers-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer and x86 fix from Ingo Molnar:
 "A CLOCK_TAI early expiry fix and an x86 microcode driver oops fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Fix incorrect tai offset calculation for non high-res timer systems

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: Return error from driver init code when loader is disabled

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Fix deadline parameter modification handling
  sched/wait: Remove might_sleep() from wait_event_cmd()
  sched: Fix crash if cpuset_cpumask_can_shrink() is passed an empty cpumask
  sched/fair: Avoid using uninitialized variable in preferred_group_nid()