- 23 Jan, 2020 4 commits
-
-
Kuninori Morimoto authored
Add soc_rtd_shutdown() to make the code easier to read Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/877e1kmi9z.wl-kuninori.morimoto.gx@renesas.comReviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Add soc_rtd_startup() to make the code easier to read Signed-off-by:
-
Jack Yu authored
This is initial amplifier driver for rt1015. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20200115112519.22050-1-jack.yu@realtek.comSigned-off-by:
-
Charles Keepax authored
Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200122104559.17043-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
- 21 Jan, 2020 22 commits
-
-
Jeff Chang authored
The MT6660 is a boosted BTL class-D amplifier with V/I sensing. A built-in DC-DC step-up converter is used to provide efficient power for class-D amplifier with multi-level class-G operation. The digital audio interface supports I2S, left-justified, right-justified, TDM and DSP A/B format for audio in with a data out used for chip information like voltage sense and current sense, which are able to be monitored via DATAO through proper Signed-off-by:
Jeff Chang <jeff_chang@richtek.com> Link: https://lore.kernel.org/r/1579153597-23286-1-git-send-email-richtek.jeff.chang@gmail.comSigned-off-by:
-
Matthias Brugger authored
The rt5645 and rt5650 have two suppliers, document them. Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200114150151.8537-1-matthias.bgg@kernel.orgSigned-off-by:
-
Tzung-Bi Shih authored
Commit 62d5ae4c ("ASoC: max98090: save and restore SHDN when changing sensitive registers SHDN bit") uses dapm_mutex to protect SHDN bit. However, snd_soc_dapm_put_enum_double() in max98090_dapm_put_enum_double() acquires the dapm_mutex again which cause a deadlock. Use snd_soc_dapm_put_enum_double_locked() instead to fix the deadlock. Fixes: 62d5ae4c ("ASoC: max98090: save and restore SHDN when changing sensitive registers SHDN bit") Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200117073814.82441-4-tzungbi@google.comSigned-off-by:
-
Tzung-Bi Shih authored
Adds snd_soc_dapm_put_enum_double_locked() for those use cases if dapm_mutex has already locked. Signed-off-by:
-
Tzung-Bi Shih authored
Commit 2dc98af6 ("ASoC: max98090: fix lockdep warning") introduced a helpful-less small lock: shdn_lock. Reverts the commit. Reasons: 1. Lockdep should not be happy by either the original or current code. From lockdep's point of view, there is a lock inversion anyway. Let d = dapm_mutex, c = controls_rwsem, s = shdn_lock, From the reported calling stack: lock acquisition order of snd_soc_register_card() is: d -> c. > snd_ctl_add_replace+0x3c/0x84 > dapm_create_or_share_kcontrol+0x24c/0x2e0 > snd_soc_dapm_new_widgets+0x308/0x594 > snd_soc_bind_card+0x80c/0xad4 > devm_snd_soc_register_card+0x34/0x6c If calling snd_soc_dapm_put_enum_double() in kcontrol's put (e.g. SOC_DAPM_ENUM_EXT), lock acquisition order is: c -> d. Note that, snd_soc_dapm_put_enum_double() acquires d. The possible lock inversion is always there if registering sound card and putting mixer control happen at the same time. In fact, it never happens because the control device don't show up to the userspace until the sound card build success. Commit 2dc98af6 ("ASoC: max98090: fix lockdep warning") changes the order to: c -> s -> d. The lock inversion is still there. 2. Commit 62d5ae4c ("ASoC: max98090: save and restore SHDN when changing sensitive registers SHDN bit") designed to use dapm_mutex to protect SHDN bit. Use a separate lock breaks the protection. DAPM changes SHDN bit automatically when it finds the path. Thus, any code wants to change the SHDN bit, need to acquire the dapm_mutex first. > SND_SOC_DAPM_SUPPLY("SHDN", M98090_REG_DEVICE_SHUTDOWN, > M98090_SHDNN_SHIFT, 0, NULL, 0), Fixes: 2dc98af6 ("ASoC: max98090: fix lockdep warning") Signed-off-by:
-
Kuninori Morimoto authored
Now, snd_soc_dai_driver::bus_control is used for how to resume. But, no driver which has bus_control has DAI driver suspend/resume support. This patch removes pointless bus_control from ALSA SoC. Signed-off-by:
-
Kuninori Morimoto authored
Historically, CPU and Codec were implemented different, but now it is merged as Component. ALSA SoC is supporting suspend/resume at DAI and Component level. The method is like below. 1) Suspend/Resume all CPU DAI if bus-control was 0 2) Suspend/Resume all Component 3) Suspend/Resume all CPU DAI if bus-control was 1 Historically 2) was Codec special operation. Because CPU and Codec were merged into Component, CPU suspend/resume has 3 chance to suspend(= 1/2/3), but Codec suspend/resume has 1 chance (= 2). Here, DAI side suspend/resume is caring bus-control, but no driver which is supporting suspend/resume is setting bus-control. This means 3) was never used. Here, used parameter for suspend/resume component->dev and dai->dev are same pointer. For that reason, we can merge DAI and Component suspend/resume. One note is that we should use 2), because it is caring BIAS level. This patch removes 1) and 3). Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can swtcih all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
Kuninori Morimoto authored
This patch removes unused DAI driver .suspend/.resume Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/871rrvym3p.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
-
- 17 Jan, 2020 14 commits
-
-
Damian van Soelen authored
The snprintf calls filling cht_rt5645_cpu_dai_name / cht_rt5645_codec_aif_name always fill them with the same string ("ssp0-port" resp "rt5645-aif2") so instead of keeping these buffers around and making cpus->dai_name / codecs->dai_name point to this, simply update the *->dai_name pointers to directly point to a string constant containing the desired string. Signed-off-by:Damian van Soelen <dj.vsoelen@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115164619.101705-5-hdegoede@redhat.comAcked-by:
-
Jordy Ubink authored
The snprintf calls filling byt_rt56*_codec_aif_name/byt_rt56*_cpu_dai_name always fill them with the same string ("rt56*-aif2" resp. ssp0-port"). So instead of keeping these buffers around and making codecs->dai_name / cpus->dai_name point to them, simply update the *->dai_name pointers to directly point to a string constant containing the desired string. Signed-off-by:Jordy Ubink <jordyubink@hotmail.nl> Signed-off-by:
-
Nariman Etemadi authored
The snprintf calls filling byt_rt56*_codec_aif_name/byt_rt56*_cpu_dai_name always fill them with the same string ("rt56*-aif2" resp. ssp0-port"). So instead of keeping these buffers around and making codecs->dai_name / cpus->dai_name point to them, simply update the *->dai_name pointers to directly point to a string constant containing the desired string. Signed-off-by:Nariman Etemadi <narimantos@gmail.com> Signed-off-by:
-
Erik Bussing authored
The 16 and 24 bit paths in byt_rt5640_codec_fixup are mostly identical, introduce a local bits variable to address the only difference and move the common bits out of the if ... else ... . Signed-off-by:
Erik Bussing <eabbussing@outlook.com> Signed-off-by:
-
Stephan Gerhold authored
PM8916 has three TX inputs that each have an (optional) internal RBIAS resistor. MIC BIAS Internal1/2 (for TX1/2) are already supported. TX3 does not have its own MIC BIAS supply, instead it is also supplied from MIC_BIAS1. Now that we have simplified the MIC BIAS Internal* implementation we can easily add support for it: Add a MIC BIAS Internal3 supply that enables the internal RBIAS resistor on TX3, and make sure to also enable the MIC_BIAS1 supply. Tested-by: Nikita Travkin <nikitos.tr@gmail.com> # longcheer-l8150 Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200114181229.42302-2-stephan@gerhold.netSigned-off-by:
-
Stephan Gerhold authored
At the moment, MIC BIAS Internal* and MIC BIAS External* both reference the same register, and have a part of their initialization sequence duplicated. For example, the sequence for enabling MIC BIAS Internal1 is: I1. Enable MIC_BIAS1 supply (MICB_EN bit in CDC_A_MICB_1_EN) I2. Enable internal RBIAS (TX1_INT_RBIAS_EN bit in CDC_A_MICB_1_INT_RBIAS) The sequence for enabling MIC BIAS External1 is: E1. Enable MIC_BIAS1 supply (MICB_EN bit in CDC_A_MICB_1_EN) (E2. Ideally, make sure internal RBIAS is disabled. However, this should not happen in practice because DAPM will disable unused supplies...) Right now we have: SND_SOC_DAPM_SUPPLY("MIC BIAS Internal1", CDC_A_MICB_1_EN, 7, 0, ...) // I1 SND_SOC_DAPM_SUPPLY("MIC BIAS External1", CDC_A_MICB_1_EN, 7, 0, ...) // E1 and I2 is done in the PM event handler (pm8916_wcd_analog_enable_micbias_int1). We can simplify this by defining a common DAPM supply for I1/E1 ("MIC_BIAS1"), and one DAPM supply for I2 ("MIC BIAS Internal1"). Additional DAPM routes ensure that we also enable the MIC_BIAS1 supply for the internal and external pull up resistor. Another advantage of this is that we now disable the internal RBIAS when it is not needed. This makes it much easier to add support for MIC BIAS Internal3 as a next step. Tested-by: Nikita Travkin <nikitos.tr@gmail.com> # longcheer-l8150 Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: -
Mark Brown authored
ASoC: Fixes for v5.5 This is mostly driver specific fixes, plus an error handling fix in the core. There is a rather large diffstat for the stm32 SAI driver, this is a very large but mostly mechanical update which wraps every register access in the driver to allow a fix to the locking which avoids circular locks, the active change is much smaller and more reasonably sized.
-
Ravulapati Vishnu vardhan rao authored
I2S SP instance has separate BCLK and LRCLK for Tx and Rx. Creating additional DAI for Rx. Signed-off-by:
Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/1579261510-12580-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by:
-
Wei Yongjun authored
In case of error, the function devm_regmap_init() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: d1ede064 ("ASoC: rt715: add RT715 codec driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200117024149.75515-1-weiyongjun1@huawei.comSigned-off-by:
-
Wei Yongjun authored
In case of error, the function devm_regmap_init() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 320b8b0d ("ASoC: rt711: add rt711 codec driver") Signed-off-by:
-
Wei Yongjun authored
In case of error, the function devm_regmap_init() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 7d2a5f9a ("ASoC: rt700: add rt700 codec driver") Signed-off-by:
-
YueHaibing authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200116021142.149000-1-yuehaibing@huawei.comSigned-off-by:
-
Shuming Fan authored
The QFN package is a new one. There is a different initial setting to the chip of QFN and WLCSP package. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20200116091854.18095-1-shumingf@realtek.comSigned-off-by:
-
Charles Keepax authored
Should the write to MADERA_OUTPUT_ENABLES_1 fail and out_clamp[0] not be set an additional error message will be printed. Clear the ret variable to avoid this. Signed-off-by:
-
