The req->fence.error will be set if this request caused GPU hang so
we can use this value to workload->status to indicate whether this
GVT request caused any problem. If it caused GPU hang, we shouldn't
trigger any context switch back to the guest.

v2:
- only take -EIO from fence->error. (Zhenyu)

Fixes: 8f1117ab (drm/i915/gvt: handle workload lifecycle properly)
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

For the vGPU workloads, now GVT-g use per vGPU scheduler, the per-ring
work_thread only pick workload belongs to the current vGPU. And with time
slice based scheduler, it waits all the engines become idle before do vGPU
switch. So we can run free dispatch in per-ring work_thread, different ring
running in different 'vGPU' won't happen.

For the workloads between vGPU and Host, this scheduler_mutex can't block
host to dispatch workload into other ring engines.

Here remove this mutex since it impacts the performance when applications
use more than 1 ring engines in 1 vgpu.

ring0 running in vGPU1, ring1 running in Host. Will happen.
ring0 running in vGPU1, ring1 running in vGPU2. Won't happen.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

This reverts commit 62d02fd1.

The rwsem recursive trace should not be fixed from kvmgt side by using
a workqueue and it is an issue should be fixed in VFIO. So this one
should be reverted.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

The command buffer address in context like ring buffer base address
and wa_ctx address need to be audit to make sure they are in the
valid GGTT range.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

It will causes memory leak, if the function setup_spt_oos() fail,
in the function intel_gvt_init_gtt(),
which allocated by get_zeroed_page() and mapped by dma_map_page().

Unmap and free the page,  after STP oos initialize fail,
it will fix this issue.
Signed-off-by: Zhou, Wenjia <zhiyuan_zhu@htc.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Commit fabef825 ("drm/i915: Drop struct_mutex around frontbuffer
flushes") adds a dependency to ifbdev->vma when flushing the framebufer,
but the checks are only against the existence of the ifbdev->fb and not
against ifbdev->vma. This leaves a window of opportunity where we may
try to operate on the fbdev prior to it being probed (thanks to
asynchronous booting).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101534
Fixes: fabef825 ("drm/i915: Drop struct_mutex around frontbuffer flushes")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622160211.783-1-chris@chris-wilson.co.ukReviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
(cherry picked from commit 15727ed0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

OA buffer initialization involves access to HW registers to set
the OA base, head and tail. Ensure device is awake while setting
these. With this, all oa.ops are covered under RPM and forcewake
wakelock.

Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498585181-23048-1-git-send-email-sagar.a.kamble@intel.com
Fixes: d7965152 ("drm/i915: Enable i915 perf stream for Haswell OA unit")
Cc: <stable@vger.kernel.org> # v4.11+
(cherry picked from commit 987f8c44)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

The Cursor Coeff is lower 6 bits in the PORT_TX_DW4 register
and hence the CURSOR_COEFF_MASK should be (0x3F << 0)

Fixes: 04416108 ("drm/i915/cnl: Add registers related to voltage
swing sequences.")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498785241-21138-1-git-send-email-manasi.d.navare@intel.com

(cherry picked from commit fcace3b9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

During the review of Coffee Lake workarounds Mika pointed out
that WaDisableKillLogic and GEN9_DISABLE_OCL_OOB_SUPPRESS_LOGIC
should be removed from CFL and with that I should carry the rv-b.

However when doing the v2 I removed another Workaround that should
remain because although not mentioned by spec the history of hangs
around it advocates on its favor.

On some follow-up patches I continued operating on the wrong
workardound, but Ville noticed that, so here is the fix for the
current CFL code that is upstream already.

Fixes: 46c26662 ("drm/i915/cfl: Introduce Coffee Lake workarounds.")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
(cherry picked from commit 98eed3d1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

When computing a hash for looking up relocation target handles in an
execbuf, we start with a large size for the hashtable and proceed to
halve it until the allocation succeeds. The final attempt is with an
order of 0 (i.e. a single element). This means that we then pass bits=0
to hash_32() which then computes "hash >> (32 - 0)" to lookup the single
element. Right shifting a value by the width of the operand is
undefined, so limit the smallest hash table we use to order 1.

v2: Keep the retry allocation flag for the final pass

Fixes: 4ff4b44c ("drm/i915: Store a direct lookup from object handle to vma")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629150425.27508-1-chris@chris-wilson.co.uk
(cherry picked from commit 4d470f73)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

There are still cases on these platforms where an attempt is made to
configure the CDCLK while the power domain is off, like when coming back
from a suspend.  So the workaround below is still needed.

This effectively reverts commit 63ff3044 ("drm/i915: Nuke the
VLV/CHV PFI programming power domain workaround").

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101517Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170628210605.4994-1-krisman@collabora.co.ukReviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 886015a0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

'dma_buf_vmap' returns NULL on error, not an error pointer.

Fixes: 6cca22ed ("drm/i915: Add some mock tests for dmabuf interop")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627053854.21152-1-christophe.jaillet@wanadoo.frReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 7c3f5317)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

We have pretty clear evidence that MSIs are getting lost on g4x and
somehow the interrupt logic doesn't seem to recover from that state
even if we try hard to clear the IIR.

Disabling IER around the normal IIR clearing in the irq handler isn't
sufficient to avoid this, so the problem really seems to be further
up the interrupt chain. This should guarantee that there's always
an edge if any IIR bits are set after the interrupt handler is done,
which should normally guarantee that the CPU interrupt is generated.
That approach seems to work perfectly on VLV/CHV, but apparently
not on g4x.

MSI is documented to be broken on 965gm at least. The chipset spec
says MSI is defeatured because interrupts can be delayed or lost,
which fits well with what we're seeing on g4x. Previously we've
already disabled GMBUS interrupts on g4x because somehow GMBUS
manages to raise legacy interrupts even when MSI is enabled.

Since there's such widespread MSI breakahge all over in the pre-gen5
land let's just give up on MSI on these platforms.

Seqno reporting might be negatively affected by this since the legcy
interrupts aren't guaranteed to be ordered with the seqno writes,
whereas MSI interrupts may be? But an occasioanlly missed seqno
seems like a small price to pay for generally working interrupts.

Cc: stable@vger.kernel.org
Cc: Diego Viola <diego.viola@gmail.com>
Tested-by: Diego Viola <diego.viola@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101261Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170626203051.28480-1-ville.syrjala@linux.intel.comReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit e38c2da0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

gvt-fixes-2017-06-29

- two race fixes for VFIO locks from Chuanxiao
- virtual display fix for BDW from Xiong
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629065424.kxopjbvntuakbyz2@zhen-hp.sh.intel.com

The dpy_reg_mmio_read_x functions directly copy 4 bytes data to the
target address with considering the length. If may cause the target
memory corrupted if the requested length less than 4 bytes. Fix it
for safety even we already have some checking to avoid this happen.
And for convince, the 3 functions are merged.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

When host connects a crt screen, linux guest will detect two
screens: crt and dp. This is wrong as linux guest has only
one dp.

In order to avoid guest get host crt screen, we should set
ADPA_CRT_HOTPLUG_MONITOR to none. But MMIO_RO(PCH_ADPA) prevent
from that. So MMIO_DH should be used instead of MMIO_RO.

v2: Clear its staus to none at initialize, so guest don't
    get host crt.(Zhangyu)
v3: SKL doesn't have this register, limit it to pre_skl.(xiong)
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

On BDW, when host physical screen and guest virtual screen aren't on
the same DDI port, guest i915 driver prints the following error and
stop running.
[    6.775873] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000068
[    6.775928] IP: intel_ddi_clock_get+0x81/0x430 [i915]
[    6.776206] Call Trace:
[    6.776233]  ? vgpu_read32+0x4f/0x100 [i915]
[    6.776264]  intel_ddi_get_config+0x11c/0x230 [i915]
[    6.776298]  intel_modeset_setup_hw_state+0x313/0xd40 [i915]
[    6.776334]  intel_modeset_init+0xe49/0x18d0 [i915]
[    6.776368]  ? vgpu_write32+0x53/0x100 [i915]
[    6.776731]  ? intel_i2c_reset+0x42/0x50 [i915]
[    6.777085]  ? intel_setup_gmbus+0x32a/0x350 [i915]
[    6.777427]  i915_driver_load+0xabc/0x14d0 [i915]
[    6.777768]  i915_pci_probe+0x4f/0x70 [i915]

The null pointer is guest intel_crtc_state->shared_dpll which is
setted in haswell_get_ddi_pll(). When guest and host screen are
on different DDI port, host driver won't set PORT_CLK_SET(guest_port),
so haswell_get_ddi_pll() will return null and don't set
pipe_config->shared_dpll, once the following program refernce this
structure, it will print the above error.

This patch set the initial val of guest PORT_CLK_SEL(guest_port) to
LCPLL_810. And guest i915 driver will reset this value according to
guest screen mode.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

commit 2889caa9 ("drm/i915: Eliminate lots of iterations over the
execobjects array") jiggled around the error handling and replace a test
that we cleaned up properly after ourselves with an assertion. That
assertion failed because in the release function (moments after the
assertion) we were indeed forgetting to mark the vma as cleared. The
consequence was when testing an invalid relocation address, we would try
to release the vma twice (following the couple of attempts to verify the
address) and on the second release notice that the first release was
incomplete.

Testcase: igt/gem_reloc_overflow/invalid-address
Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622104722.2583-1-chris@chris-wilson.co.ukReviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 51d05e1b)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

i915_vma_move_to_active() takes the execobject flags and not a boolean!
Instead of passing EXEC_OBJECT_WRITE we passed true [i.e.
EXEC_OBJECT_NEEDS_FENCE] causing us to start tracking the
vma->last_fence access and since we forgot to clear that on unbinding,
we caused a use-after-free.

[  321.263854] BUG: KASAN: use-after-free in i915_gem_request_retire+0x1728/0x1740 [i915]
[  321.264001] Read of size 8 at addr ffff880100fc67d8 by task gem_exec_reloc/2868

[  321.264181] CPU: 0 PID: 2868 Comm: gem_exec_reloc Not tainted 4.12.0-rc6-CI-Custom_2759+ #1
[  321.264195] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F6 02/17/2015
[  321.264208] Call Trace:
[  321.264234]  dump_stack+0x67/0x99
[  321.264260]  print_address_description+0x77/0x290
[  321.264437]  ? i915_gem_request_retire+0x1728/0x1740 [i915]
[  321.264459]  kasan_report+0x269/0x350
[  321.264487]  __asan_report_load8_noabort+0x14/0x20
[  321.264660]  i915_gem_request_retire+0x1728/0x1740 [i915]
[  321.264841]  ? intel_ring_context_pin+0x131/0x690 [i915]
[  321.265021]  i915_gem_request_alloc+0x2c6/0x1220 [i915]
[  321.265044]  ? _raw_spin_unlock_irqrestore+0x3d/0x60
[  321.265226]  i915_gem_do_execbuffer+0xac0/0x2a20 [i915]
[  321.265250]  ? __lock_acquire+0xceb/0x5450
[  321.265269]  ? entry_SYSCALL_64_fastpath+0x1c/0xb1
[  321.265291]  ? kvmalloc_node+0x6b/0x80
[  321.265310]  ? kvmalloc_node+0x6b/0x80
[  321.265489]  ? eb_relocate_slow+0xbe0/0xbe0 [i915]
[  321.265520]  ? ___slab_alloc.constprop.28+0x2ab/0x3d0
[  321.265549]  ? debug_check_no_locks_freed+0x280/0x280
[  321.265591]  ? __might_fault+0xc6/0x1b0
[  321.265782]  i915_gem_execbuffer2+0x14a/0x3f0 [i915]
[  321.265815]  drm_ioctl+0x4ba/0xaa0
[  321.265986]  ? i915_gem_execbuffer+0xde0/0xde0 [i915]
[  321.266017]  ? drm_getunique+0x270/0x270
[  321.266068]  do_vfs_ioctl+0x17f/0xfa0
[  321.266091]  ? __fget+0x1ba/0x330
[  321.266112]  ? lock_acquire+0x390/0x390
[  321.266133]  ? ioctl_preallocate+0x1d0/0x1d0
[  321.266164]  ? __fget+0x1db/0x330
[  321.266194]  ? __fget_light+0x79/0x1f0
[  321.266219]  SyS_ioctl+0x3c/0x70
[  321.266247]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[  321.266265] RIP: 0033:0x7fcede207357
[  321.266279] RSP: 002b:00007ffef0effe58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  321.266307] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fcede207357
[  321.266321] RDX: 00007ffef0effef0 RSI: 0000000040406469 RDI: 0000000000000004
[  321.266335] RBP: ffffffff812097c6 R08: 0000000000000008 R09: 0000000000000000
[  321.266349] R10: 0000000000000008 R11: 0000000000000246 R12: ffff880116bcff98
[  321.266363] R13: ffffffff81cb7cb3 R14: ffff880116bcff70 R15: 0000000000000000
[  321.266385]  ? __this_cpu_preempt_check+0x13/0x20
[  321.266406]  ? trace_hardirqs_off_caller+0x1d6/0x2c0

[  321.266487] Allocated by task 2868:
[  321.266568]  save_stack_trace+0x16/0x20
[  321.266586]  kasan_kmalloc+0xee/0x180
[  321.266602]  kasan_slab_alloc+0x12/0x20
[  321.266620]  kmem_cache_alloc+0xc7/0x2e0
[  321.266795]  i915_vma_instance+0x28c/0x1540 [i915]
[  321.266964]  eb_lookup_vmas+0x5a7/0x2250 [i915]
[  321.267130]  i915_gem_do_execbuffer+0x69a/0x2a20 [i915]
[  321.267296]  i915_gem_execbuffer2+0x14a/0x3f0 [i915]
[  321.267315]  drm_ioctl+0x4ba/0xaa0
[  321.267333]  do_vfs_ioctl+0x17f/0xfa0
[  321.267350]  SyS_ioctl+0x3c/0x70
[  321.267369]  entry_SYSCALL_64_fastpath+0x1c/0xb1

[  321.267428] Freed by task 177:
[  321.267502]  save_stack_trace+0x16/0x20
[  321.267521]  kasan_slab_free+0xad/0x180
[  321.267539]  kmem_cache_free+0xc5/0x340
[  321.267710]  i915_vma_unbind+0x666/0x10a0 [i915]
[  321.267880]  i915_vma_close+0x23a/0x2f0 [i915]
[  321.268048]  __i915_gem_free_objects+0x17d/0xc70 [i915]
[  321.268215]  __i915_gem_free_work+0x49/0x70 [i915]
[  321.268234]  process_one_work+0x66f/0x1410
[  321.268252]  worker_thread+0xe1/0xe90
[  321.268269]  kthread+0x304/0x410
[  321.268285]  ret_from_fork+0x27/0x40

[  321.268346] The buggy address belongs to the object at ffff880100fc6640
                which belongs to the cache i915_vma of size 656
[  321.268550] The buggy address is located 408 bytes inside of
                656-byte region [ffff880100fc6640, ffff880100fc68d0)
[  321.268741] The buggy address belongs to the page:
[  321.268837] page:ffffea000403f000 count:1 mapcount:0 mapping:          (null) index:0xffff880100fc5980 compound_mapcount: 0
[  321.269045] flags: 0x8000000000008100(slab|head)
[  321.269147] raw: 8000000000008100 0000000000000000 ffff880100fc5980 00000001001e001d
[  321.269312] raw: ffffea0004038e20 ffff880116b46240 ffff88011646c640 0000000000000000
[  321.269484] page dumped because: kasan: bad access detected

[  321.269665] Memory state around the buggy address:
[  321.269778]  ffff880100fc6680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  321.269949]  ffff880100fc6700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  321.270115] >ffff880100fc6780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  321.270279]                                                     ^
[  321.270410]  ffff880100fc6800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  321.270576]  ffff880100fc6880: fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc
[  321.270740] ==================================================================
[  321.270903] Disabling lock debugging due to kernel taint

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101511
Fixes: 7dd4f672 ("drm/i915: Async GPU relocation processing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620124321.1108-2-chris@chris-wilson.co.ukReviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
(cherry picked from commit 25ffaa67)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Paulo noticed that we were missing few bits clear
before writing values back to the register on
these RMW MMIO operations.

v2: Remove "POST_" from CURSOR_COEFF_MASK. (Paulo).
v3: Remove unnecessary braces. (Jani).

Fixes: cf54ca8b ("drm/i915/cnl: Implement voltage swing sequence.")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497897572-22520-1-git-send-email-rodrigo.vivi@intel.com
(cherry picked from commit 1f588aeb)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

There are two kinds of locking sequence.

One is in the thread which is started by vfio ioctl to do
the iommu unmapping. The locking sequence is:
	down_read(&group_lock) ----> mutex_lock(&cached_lock)

The other is in the vfio release thread which will unpin all
the cached pages. The lock sequence is:
	mutex_lock(&cached_lock) ---> down_read(&group_lock)

And, the cache_lock is used to protect the rb tree of the cache
node and doing vfio unpin doesn't require this lock. Move the
vfio unpin out of the cache_lock protected region.

v2:
- use for style instead of do{}while(1). (Zhenyu)

Fixes: f30437c5 ("drm/i915/gvt: add KVMGT support")
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

vfio_unpin_pages will hold a read semaphore however it is already hold
in the same thread by vfio ioctl. It will cause below warning:

[ 5102.127454] ============================================
[ 5102.133379] WARNING: possible recursive locking detected
[ 5102.139304] 4.12.0-rc4+ #3 Not tainted
[ 5102.143483] --------------------------------------------
[ 5102.149407] qemu-system-x86/1620 is trying to acquire lock:
[ 5102.155624]  (&container->group_lock){++++++}, at: [<ffffffff817768c6>] vfio_unpin_pages+0x96/0xf0
[ 5102.165626]
but task is already holding lock:
[ 5102.172134]  (&container->group_lock){++++++}, at: [<ffffffff8177728f>] vfio_fops_unl_ioctl+0x5f/0x280
[ 5102.182522]
other info that might help us debug this:
[ 5102.189806]  Possible unsafe locking scenario:

[ 5102.196411]        CPU0
[ 5102.199136]        ----
[ 5102.201861]   lock(&container->group_lock);
[ 5102.206527]   lock(&container->group_lock);
[ 5102.211191]
*** DEADLOCK ***

[ 5102.217796]  May be due to missing lock nesting notation

[ 5102.225370] 3 locks held by qemu-system-x86/1620:
[ 5102.230618]  #0:  (&container->group_lock){++++++}, at: [<ffffffff8177728f>] vfio_fops_unl_ioctl+0x5f/0x280
[ 5102.241482]  #1:  (&(&iommu->notifier)->rwsem){++++..}, at: [<ffffffff810de775>] __blocking_notifier_call_chain+0x35/0x70
[ 5102.253713]  #2:  (&vgpu->vdev.cache_lock){+.+...}, at: [<ffffffff8157b007>] intel_vgpu_iommu_notifier+0x77/0x120
[ 5102.265163]
stack backtrace:
[ 5102.270022] CPU: 5 PID: 1620 Comm: qemu-system-x86 Not tainted 4.12.0-rc4+ #3
[ 5102.277991] Hardware name: Intel Corporation S1200RP/S1200RP, BIOS S1200RP.86B.03.01.APER.061220151418 06/12/2015
[ 5102.289445] Call Trace:
[ 5102.292175]  dump_stack+0x85/0xc7
[ 5102.295871]  validate_chain.isra.21+0x9da/0xaf0
[ 5102.300925]  __lock_acquire+0x405/0x820
[ 5102.305202]  lock_acquire+0xc7/0x220
[ 5102.309191]  ? vfio_unpin_pages+0x96/0xf0
[ 5102.313666]  down_read+0x2b/0x50
[ 5102.317259]  ? vfio_unpin_pages+0x96/0xf0
[ 5102.321732]  vfio_unpin_pages+0x96/0xf0
[ 5102.326024]  intel_vgpu_iommu_notifier+0xe5/0x120
[ 5102.331283]  notifier_call_chain+0x4a/0x70
[ 5102.335851]  __blocking_notifier_call_chain+0x4d/0x70
[ 5102.341490]  blocking_notifier_call_chain+0x16/0x20
[ 5102.346935]  vfio_iommu_type1_ioctl+0x87b/0x920
[ 5102.351994]  vfio_fops_unl_ioctl+0x81/0x280
[ 5102.356660]  ? __fget+0xf0/0x210
[ 5102.360261]  do_vfs_ioctl+0x93/0x6a0
[ 5102.364247]  ? __fget+0x111/0x210
[ 5102.367942]  SyS_ioctl+0x41/0x70
[ 5102.371542]  entry_SYSCALL_64_fastpath+0x1f/0xbe

put the vfio_unpin_pages in a workqueue can fix this.

v2:
- use for style instead of do{}while(1). (Zhenyu)
v3:
- rename gvt_cache_mark to gvt_cache_mark_remove. (Zhenyu)

Fixes: 659643f7 ("drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT")
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

UAPI Changes:
- vc4: Add get/set tiling format ioctls (Eric)

Driver Changes:
- vc4: Add tiling T-format support for scanout (Eric)
- vc4: Use atomic helpers in commit (Boris)

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Eric Anholt <eric@anholt.net>

* tag 'drm-misc-next-2017-06-19_0' of git://anongit.freedesktop.org/git/drm-misc:
  drm/vc4: Mimic drm_atomic_helper_commit() behavior
  drm/vc4: Add get/set tiling ioctls.
  drm/vc4: Add T-format scanout support.

This was from a merge I did incorrectly.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Final pile of features for 4.13

New uabi:
- batch bo in first slot, for faster execbuf assembly in userspace
  (Chris Wilson)
- (sub)slice getparam, needed for mesa perf support (Robert Bragg)

First pile of patches for cnl/cfl support, maintained by Rodrigo but
with lots of contributions from others. Still incomplete since public
review still ongoing.

Features/refactoring:
- Make execbuf faster (Chris Wilson), a pile of series to make execbuf
  buffer handling have fewer passes, use less list walking, postpone
  more work to async workers and shuffle buffers less, all to make the
  common case much faster (in some cases at least).
- cold boot support for glk dsi (Madhav Chauhan)
- Clean up pipe A quirk and related old platform hacks (Ville)
- perf sampling support for kbl/glk (Lionel)
- perf cleanups (Robert Bragg)
- wire atomic state to backlight code, to avoid pipe lookup hacks
  (Maarten)
- reduce request waiting latency/overhead to remove the spinning and
  associated cpu cycle wasting (Chris)
- fix 90/270 rotation wm computation (Ville)
- new ddb allocation algo for skl (Kumar Mahesh)
- fix regression due to system suspend optimiazatino (Imre)
- the usual pile of small cleanups and refactors all over

GVT updates contained in this tag:
- optimization for per-VM mmio save/restore (Changbin)
- optimization for mmio hash table (Changbin)
- scheduler optimization with event (Ping)
- vGPU reset refinement (Fred)
- other misc refactor and cleanups, etc.

* tag 'drm-intel-next-2017-06-19' of git://anongit.freedesktop.org/git/drm-intel: (170 commits)
  drm/i915: Update DRIVER_DATE to 20170619
  drm/i915/cfl: Introduce Coffee Lake workarounds.
  drm/i915: Store 9 bits of PCI Device ID for platforms with a LP PCH
  drm/i915: Stash a pointer to the obj's resv in the vma
  drm/i915: Async GPU relocation processing
  drm/i915: Allow execbuffer to use the first object as the batch
  drm/i915: Wait upon userptr get-user-pages within execbuffer
  drm/i915: First try the previous execbuffer location
  drm/i915: Store a persistent reference for an object in the execbuffer cache
  drm/i915: Eliminate lots of iterations over the execobjects array
  drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations
  drm/i915: Pass vma to relocate entry
  drm/i915: Store a direct lookup from object handle to vma
  drm/i915: Fix retrieval of hangcheck stats
  drm/i915: Store i915_gem_object_is_coherent() as a bit next to cache-dirty
  drm/i915: Mark CPU cache as dirty on every transition for CPU writes
  drm/i915: Make i915_vma_destroy() static
  drm/i915: Actually attach the tv_format property to the SDVO connector
  Revert "drm/i915/skl: New ddb allocation algorithm"
  drm/i915/glk: Add cold boot sequence for GLK DSI
  ...

This time around, the biggest thing is a bunch of GEM rework for more
fine grained locking and prep work to handle multiple address spaces
(ie. per-process pagetables).  Also some HDMI fixes for 8x96
(snapdragon 820).

One unrelated bus patch, for something that seems to get merged
through whatever random tree (and has all the right ack's).

* tag 'drm-msm-next-2017-06-20' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: Fix potential buffer overflow issue
  bus: SIMPLE_PM_BUS does not depend on ARCH_RENESAS
  drm/msm: Separate locking of buffer resources from struct_mutex
  drm/msm/hdmi: Fix HDMI pink strip issue seen on 8x96
  drm/msm/hdmi: 8996 PLL: Populate unprepare
  drm/msm/hdmi: Use bitwise operators when building register values
  drm/msm: update generated headers
  drm/msm: remove address-space id
  drm/msm: support for an arbitrary number of address spaces
  drm/msm: refactor how we handle vram carveout buffers
  drm/msm: pass address-space to _get_iova() and friends
  drm/msm/mdp4+5: move aspace/id to base class
  drm/msm/mdp5: kill pipe_lock
  drm/msm: fix locking inconsistency for gpu->hw_init()
  drm/msm: Remove memptrs->wptr
  drm/msm: Add a struct to pass configuration to msm_gpu_init()
  drm/msm: Add hint to DRM_IOCTL_MSM_GEM_INFO to return an object IOVA
  drm/msm: Remove idle function hook
  drm/msm: Remove DRM_MSM_NUM_IOCTLS
  drm/msm: gpu: Enable zap shader for A5XX

A few more things for 4.13:
- Semaphore support using sync objects
- Drop fb location programming
- Optimize bo list ioctl

* 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: Optimize mutex usage (v4)
  drm/amdgpu: Optimization of AMDGPU_BO_LIST_OP_CREATE (v2)
  amdgpu: use drm sync objects for shared semaphores (v6)
  amdgpu/cs: split out fence dependency checking (v2)
  drm/amdgpu: don't check the default value for vm size

Here are the Mali DP driver changes. They include the mali-dp specific
changes from Jose Abreu on crtc->mode_valid() as well as a couple of
patches for fixing the sharing of IRQ lines and use of DRM CMA helper
for framebuffer physical address calculation. Please pull!

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm/arm: mali-dp: Use CMA helper for plane buffer address calculation
  drm/mali-dp: Check PM status when sharing interrupt lines
  drm/arm: malidp: Use crtc->mode_valid() callback

- HDMI stereoscopic support
- Rework of display code to properly support SOR pad macro routing on
>=GM20x GPUs
- Various other fixes/improvements.

* 'linux-4.13' of git://github.com/skeggsb/linux: (73 commits)
  drm/nouveau/disp/nv50-: avoid creating ORs that aren't present on HW
  drm/nouveau: use proper prototype in nouveau_pmops_runtime() definition
  drm/nouveau: Skip vga_fini on non-PCI device
  drm/nouveau/tegra: Don't leave GPU in reset
  drm/nouveau/tegra: Skip manual unpowergating when not necessary
  drm/nouveau/hwmon: Change permissions to numeric
  drm/nouveau/hwmon: expose the auto_point and pwm_min/max attrs
  drm/nouveau/hwmon: Remove old code, add .write/.read operations
  drm/nouveau/hwmon: Add nouveau_hwmon_ops structure with .is_visible/.read_string
  drm/nouveau/hwmon: Add config for all sensors and their settings
  drm/nouveau/disp/gm200-: allow non-identity mapping of SOR <-> macro links
  drm/nouveau/disp/nv50-: implement a common supervisor 3.0
  drm/nouveau/disp/nv50-: implement a common supervisor 2.2
  drm/nouveau/disp/nv50-: implement a common supervisor 2.1
  drm/nouveau/disp/nv50-: implement a common supervisor 2.0
  drm/nouveau/disp/nv50-: implement a common supervisor 1.0
  drm/nouveau/disp/nv50-gt21x: remove workaround for dp->tmds hotplug issues
  drm/nouveau/disp/dp: use new devinit script interpreter entry-point
  drm/nouveau/disp/dp: determine link bandwidth requirements from head state
  drm/nouveau/disp: introduce acquire/release display path methods
  ...

drm/tegra: Changes for v4.13-rc1

This starts off with the addition of more documentation for the host1x
and DRM drivers and finishes with a slew of fixes and enhancements for
the staging IOCTLs as a result of the awesome work done by Dmitry and
Erik on the grate reverse-engineering effort.

* tag 'drm/tegra/for-4.13-rc1' of git://anongit.freedesktop.org/tegra/linux:
  gpu: host1x: At first try a non-blocking allocation for the gather copy
  gpu: host1x: Refactor channel allocation code
  gpu: host1x: Remove unused host1x_cdma_stop() definition
  gpu: host1x: Remove unused 'struct host1x_cmdbuf'
  gpu: host1x: Check waits in the firewall
  gpu: host1x: Correct swapped arguments in the is_addr_reg() definition
  gpu: host1x: Forbid unrelated SETCLASS opcode in the firewall
  gpu: host1x: Forbid RESTART opcode in the firewall
  gpu: host1x: Forbid relocation address shifting in the firewall
  gpu: host1x: Do not leak BO's phys address to userspace
  gpu: host1x: Correct host1x_job_pin() error handling
  gpu: host1x: Initialize firewall class to the job's one
  drm/tegra: dc: Disable plane if it is invisible
  drm/tegra: dc: Apply clipping to the plane
  drm/tegra: dc: Avoid reset asserts on Tegra20
  drm/tegra: Check syncpoint ID in the 'submit' IOCTL
  drm/tegra: Correct copying of waitchecks and disable them in the 'submit' IOCTL
  drm/tegra: Check for malformed offsets and sizes in the 'submit' IOCTL
  drm/tegra: Add driver documentation
  gpu: host1x: Flesh out kerneldoc

In function submit_create, if nr_cmds or nr_bos is assigned with
negative value, the allocated buffer may be small than intended.
Using this buffer will lead to buffer overflow issue.
Signed-off-by: Kasin Li <donglil@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

In original function amdgpu_bo_list_get, the waiting
for result->lock can be quite long while mutex
bo_list_lock was holding. It can make other tasks
waiting for bo_list_lock for long period.

Secondly, this patch allows several tasks(readers of idr)
to proceed at the same time.

v2: use rcu and kref (Dave Airlie and Christian König)
v3: update v1 commit message (Michel Dänzer)
v4: rebase on upstream (Alex Deucher)
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

v2: Remove duplication of zeroing of bo list (Christian König)
    Move idr_alloc function to end of ioctl (Christian König)
    Call kfree bo_list when amdgpu_bo_list_set return error.
    Combine the previous two patches into this patch.
    Add amdgpu_bo_list_set function prototype.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

In fact, it is needed for PCI to work on msm8996 (and probably other
things).  No idea why it was depending on renesas but that doesn't make
any sense.  So drop the dependency.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Buffer object specific resources like pages, domains, sg list
need not be protected with struct_mutex. They can be protected
with a buffer object level lock. This simplifies locking and
makes it easier to avoid potential recursive locking scenarios
for SVM involving mmap_sem and struct_mutex. This also removes
unnecessary serialization when creating buffer objects, and also
between buffer object creation and GPU command submission.
Signed-off-by: Sushmita Susheelendra <ssusheel@codeaurora.org>
[robclark: squash in handling new locking for shrinker]
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Coffee Lake inherit most of Kabylake production
workarounds.

v2: Fix typo on commit message and remove
    WaDisableKillLogic and GEN9_DISABLE_OCL_OOB_SUPPRESS_LOGIC,
    since as Mika pointed out they shouldn't be here for cfl
    according to BSpec.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497653398-15722-1-git-send-email-rodrigo.vivi@intel.com

This creates a new command submission chunk for amdgpu
to add in and out sync objects around the submission.

Sync objects are managed via the drm syncobj ioctls.

The command submission interface is enhanced with two new
chunks, one for syncobj pre submission dependencies,
and one for post submission sync obj signalling,
and just takes a list of handles for each.

This is based on work originally done by David Zhou at AMD,
with input from Christian Konig on what things should look like.

In theory VkFences could be backed with sync objects and
just get passed into the cs as syncobj handles as well.

NOTE: this interface addition needs a version bump to expose
it to userspace.

TODO: update to dep_sync when rebasing onto amdgpu master.
(with this - r-b from Christian)

v1.1: keep file reference on import.
v2: move to using syncobjs
v2.1: change some APIs to just use p pointer.
v3: make more robust against CS failures, we now add the
wait sems but only remove them once the CS job has been
submitted.
v4: rewrite names of API and base on new syncobj code.
v5: move post deps earlier, rename some apis
v6: lookup post deps earlier, and just replace fences
in post deps stage (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This just splits out the fence depenency checking into it's
own function to make it easier to add semaphore dependencies.

v2: rebase onto other changes.

v1-Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>