- 10 Nov, 2019 5 commits
-
-
Jernej Skrabec authored
[ Upstream commit ccdf3aaa ] It turns out that sopine-baseboard needs same fix as pine64-plus for ethernet PHY. Here too Realtek ethernet PHY chip needs additional power on delay to properly initialize. Datasheet mentions that chip needs 30 ms to be properly powered on and that it needs some more time to be initialized. Fix that by adding 100ms ramp delay to regulator responsible for powering PHY. Note that issue was found out and fix tested on pine64-lts, but it's basically the same as sopine-baseboard, only layout and connectors differ. Fixes: bdfe4ceb ("arm64: allwinner: a64: add Ethernet PHY regulator for several boards") Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jernej Skrabec authored
[ Upstream commit 25113667 ] Depending on kernel and bootloader configuration, it's possible that Realtek ethernet PHY isn't powered on properly. According to the datasheet, it needs 30ms to power up and then some more time before it can be used. Fix that by adding 100ms ramp delay to regulator responsible for powering PHY. Fixes: 94dcfdc7 ("arm64: allwinner: pine64-plus: Enable dwmac-sun8i") Suggested-by:
Ondrej Jirman <megous@megous.com> Signed-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit ca234719 ] In case of WM1811 device there are currently being registered controls referring to registers not existing on that device. It has been noticed when getting values of "AIF1ADC2 Volume", "AIF1DAC2 Volume" controls was failing during ALSA state restoring at boot time: "amixer: Mixer hw:0 load error: Device or resource busy" Reading some registers through I2C was failing with EBUSY error and indeed these registers were not available according to the datasheet. To fix this controls not available on WM1811 are moved to a separate array and registered only for WM8994 and WM8958. There are some further differences between WM8994 and WM1811, e.g. registers 603h, 604h, 605h, which are not covered in this patch. Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20190920130218.32690-2-s.nawrocki@samsung.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Marco Felsch authored
[ Upstream commit 131cb121 ] Currently the regulator-suspend-min/max-microvolt must be within the root regulator node but the dt-bindings specifies it as subnode properties for the regulator-state-[mem/disk/standby] node. The only DT using this bindings currently is the at91-sama5d2_xplained.dts and this DT uses it correctly. I don't know if it isn't tested but it can't work without this fix. Fixes: f7efad10 ("regulator: add PM suspend and resume hooks") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20190917154021.14693-3-m.felsch@pengutronix.deSigned-off-by:
-
Seth Forshee authored
[ Upstream commit 29be86d7 ] The gcc -fcf-protection=branch option is not compatible with -mindirect-branch=thunk-extern. The latter is used when CONFIG_RETPOLINE is selected, and this will fail to build with a gcc which has -fcf-protection=branch enabled by default. Adding -fcf-protection=none when building with retpoline enabled prevents such build failures. Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
- 06 Nov, 2019 35 commits
-
-
Greg Kroah-Hartman authored
-
Takashi Iwai authored
[ Upstream commit 1a7f60b9 ] This reverts commit caa8422d. It turned out that this commit caused a regression at shutdown / reboot, as the synchronize_irq() calls seems blocking the whole shutdown. Also another part of the change about shuffling the call order looks suspicious; the azx_stop_chip() call disables the CORB / RIRB while the others may still need the CORB/RIRB update. Since the original commit itself was a cargo-fix, let's revert the whole patch. Fixes: caa8422d ("ALSA: hda: Flush interrupts on disabling") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205333 BugLinK: https://bugs.freedesktop.org/show_bug.cgi?id=111174Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://lore.kernel.org/r/20191028081056.22010-1-tiwai@suse.deSigned-off-by:
-
Nicholas Piggin authored
[ Upstream commit 7d647505 ] Commit e78a7614 ("idle: Prevent late-arriving interrupts from disrupting offline") changes arch_cpu_idle_dead to be called with interrupts disabled, which triggers the WARN in pnv_smp_cpu_kill_self. Fix this by fixing up irq_happened after hard disabling, rather than requiring there are no pending interrupts, similarly to what was done done until commit 2525db04 ("powerpc/powernv: Simplify lazy IRQ handling in CPU offline"). Fixes: e78a7614 ("idle: Prevent late-arriving interrupts from disrupting offline") Reported-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> [mpe: Add unexpected_mask rather than checking for known bad values, change the WARN_ON() to a WARN_ON_ONCE()] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191022115814.22456-1-npiggin@gmail.comSigned-off-by:
-
Justin Song authored
[ Upstream commit e2995b95 ] This patch adds native DSD support for Gustard U16/X26 USB Interface. Tested using VID and fp->dsd_raw method. Signed-off-by:
Justin Song <flyingecar@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CA+9XP1ipsFn+r3bCBKRinQv-JrJ+EHOGBdZWZoMwxFv0R8Y1MQ@mail.gmail.comSigned-off-by:
-
Jussi Laako authored
[ Upstream commit 0067e154 ] Oppo has issued firmware updates that change alt setting used for DSD support. However, these devices seem to support auto-detection, so support is moved from explicit whitelisting to auto-detection. Also Rotel devices have USB interfaces that support DSD with auto-detection. Signed-off-by:
Jussi Laako <jussi@sonarnerd.net> Signed-off-by:
-
Jussi Laako authored
[ Upstream commit eb7505d5 ] Add DSD support auto-detection for newer Playback Designs devices. Older device generations have a different USB interface implementation. Keep the auto-detection VID whitelist sorted. Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit a3933186 ] When a card is disconnected while in use, the system waits until all opened files are closed then releases the card. This is done via put_device() of the card device in each device release code. The recently reported mutex deadlock bug happens in this code path; snd_timer_close() for the timer device deals with the global register_mutex and it calls put_device() there. When this timer device is the last one, the card gets freed and it eventually calls snd_timer_free(), which has again the protection with the global register_mutex -- boom. Basically put_device() call itself is race-free, so a relative simple workaround is to move this put_device() call out of the mutex. For achieving that, in this patch, snd_timer_close_locked() got a new argument to store the card device pointer in return, and each caller invokes put_device() with the returned object after the mutex unlock. Reported-and-tested-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 41672c0c ] Just a minor refactoring to use the standard goto for error paths in snd_timer_open() instead of open code. The first mutex_lock() is moved to the beginning of the function to make the code clearer. Signed-off-by:
-
Eric Dumazet authored
commit 159d2c7d upstream. qdisc_root() use from netem_enqueue() triggers a lockdep warning. __dev_queue_xmit() uses rcu_read_lock_bh() which is not equivalent to rcu_read_lock() + local_bh_disable_bh as far as lockdep is concerned. WARNING: suspicious RCU usage 5.3.0-rc7+ #0 Not tainted ----------------------------- include/net/sch_generic.h:492 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by syz-executor427/8855: #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: lwtunnel_xmit_redirect include/net/lwtunnel.h:92 [inline] #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x2dc/0x2570 net/ipv4/ip_output.c:214 #1: 00000000b5525c01 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x20a/0x3650 net/core/dev.c:3804 #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: spin_lock include/linux/spinlock.h:338 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_xmit_skb net/core/dev.c:3502 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_queue_xmit+0x14b8/0x3650 net/core/dev.c:3838 stack backtrace: CPU: 0 PID: 8855 Comm: syz-executor427 Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5357 qdisc_root include/net/sch_generic.h:492 [inline] netem_enqueue+0x1cfb/0x2d80 net/sched/sch_netem.c:479 __dev_xmit_skb net/core/dev.c:3527 [inline] __dev_queue_xmit+0x15d2/0x3650 net/core/dev.c:3838 dev_queue_xmit+0x18/0x20 net/core/dev.c:3902 neigh_hh_output include/net/neighbour.h:500 [inline] neigh_output include/net/neighbour.h:509 [inline] ip_finish_output2+0x1726/0x2570 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x5fc/0xb90 net/ipv4/ip_output.c:290 ip_finish_output+0x38/0x1f0 net/ipv4/ip_output.c:318 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip_mc_output+0x292/0xf40 net/ipv4/ip_output.c:417 dst_output include/net/dst.h:436 [inline] ip_local_out+0xbb/0x190 net/ipv4/ip_output.c:125 ip_send_skb+0x42/0xf0 net/ipv4/ip_output.c:1555 udp_send_skb.isra.0+0x6b2/0x1160 net/ipv4/udp.c:887 udp_sendmsg+0x1e96/0x2820 net/ipv4/udp.c:1174 inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Valentin Vidic authored
commit 77b6d09f upstream. Make sure res does not contain random value if the call to sr_read_cmd fails for some reason. Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com Signed-off-by:
Valentin Vidic <vvidic@valentin-vidic.from.hr> Signed-off-by:
-
Eric Dumazet authored
commit a7137534 upstream. syzbot got a NULL dereference in bond_update_slave_arr() [1], happening after a failure to allocate bond->slave_arr A workqueue (bond_slave_arr_handler) is supposed to retry the allocation later, but if the slave is removed before the workqueue had a chance to complete, bond->slave_arr can still be NULL. [1] Failed to build slave-array. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI Modules linked in: Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039 RSP: 0018:ffff88018fe33678 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000 RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20 RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0 FS: 00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff82b5b45e>] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923 [<ffffffff82b5b966>] bond_release drivers/net/bonding/bond_main.c:2039 [inline] [<ffffffff82b5b966>] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562 [<ffffffff83ae25f4>] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328 [<ffffffff83ae2e58>] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495 [<ffffffff83995ffd>] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088 [<ffffffff83996a80>] sock_ioctl+0x300/0x5d0 net/socket.c:1196 [<ffffffff81b124db>] vfs_ioctl fs/ioctl.c:47 [inline] [<ffffffff81b124db>] file_ioctl fs/ioctl.c:501 [inline] [<ffffffff81b124db>] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688 [<ffffffff81b12dc6>] SYSC_ioctl fs/ioctl.c:705 [inline] [<ffffffff81b12dc6>] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: ee637714 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Johan Hovold authored
commit 6af3aa57 upstream. The driver would fail to deregister and its class device and free related resources on late probe errors. Reported-by: syzbot+cb035c75c03dbe34b796@syzkaller.appspotmail.com Fixes: 32ecc75d ("NFC: pn533: change order operations in dev registation") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
David Howells authored
commit 55f6c98e upstream. rxrpc_put_peer() calls trace_rxrpc_peer() after it has done the decrement of the refcount - which looks at the debug_id in the peer record. But unless the refcount was reduced to zero, we no longer have the right to look in the record and, indeed, it may be deleted by some other thread. Fix this by getting the debug_id out before decrementing the refcount and then passing that into the tracepoint. This can cause the following symptoms: BUG: KASAN: use-after-free in __rxrpc_put_peer net/rxrpc/peer_object.c:411 [inline] BUG: KASAN: use-after-free in rxrpc_put_peer+0x685/0x6a0 net/rxrpc/peer_object.c:435 Read of size 8 at addr ffff888097ec0058 by task syz-executor823/24216 Fixes: 1159d4b4 ("rxrpc: Add a tracepoint to track rxrpc_peer refcounting") Reported-by: syzbot+b9be979c55f2bea8ed30@syzkaller.appspotmail.com Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
commit 9ebeddef upstream. The rxrpc_peer record needs to hold a reference on the rxrpc_local record it points as the peer is used as a base to access information in the rxrpc_local record. This can cause problems in __rxrpc_put_peer(), where we need the network namespace pointer, and in rxrpc_send_keepalive(), where we need to access the UDP socket, leading to symptoms like: BUG: KASAN: use-after-free in __rxrpc_put_peer net/rxrpc/peer_object.c:411 [inline] BUG: KASAN: use-after-free in rxrpc_put_peer+0x685/0x6a0 net/rxrpc/peer_object.c:435 Read of size 8 at addr ffff888097ec0058 by task syz-executor823/24216 Fix this by taking a ref on the local record for the peer record. Fixes: ace45bec ("rxrpc: Fix firewall route keepalive") Fixes: 2baec2c3 ("rxrpc: Support network namespacing") Reported-by: syzbot+b9be979c55f2bea8ed30@syzkaller.appspotmail.com Signed-off-by:
-
David Howells authored
commit c48fc11b upstream. When sendmsg() finds a call to continue on with, if the call is in an inappropriate state, it doesn't release the ref it just got on that call before returning an error. This causes the following symptom to show up with kasan: BUG: KASAN: use-after-free in rxrpc_send_keepalive+0x8a2/0x940 net/rxrpc/output.c:635 Read of size 8 at addr ffff888064219698 by task kworker/0:3/11077 where line 635 is: whdr.epoch = htonl(peer->local->rxnet->epoch); The local endpoint (which cannot be pinned by the call) has been released, but not the peer (which is pinned by the call). Fix this by releasing the call in the error path. Fixes: 37411cad ("rxrpc: Fix potential NULL-pointer exception") Reported-by: syzbot+d850c266e3df14da1d31@syzkaller.appspotmail.com Signed-off-by:
-
Eric Biggers authored
commit b74555de upstream. syzbot reported: BUG: memory leak unreferenced object 0xffff88811eb3de00 (size 224): comm "syz-executor559", pid 7315, jiffies 4294943019 (age 10.300s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 a0 38 24 81 88 ff ff 00 c0 f2 15 81 88 ff ff ..8$............ backtrace: [<000000008d1c66a1>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<000000008d1c66a1>] slab_post_alloc_hook mm/slab.h:439 [inline] [<000000008d1c66a1>] slab_alloc_node mm/slab.c:3269 [inline] [<000000008d1c66a1>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579 [<00000000447d9496>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198 [<000000000cdbf82f>] alloc_skb include/linux/skbuff.h:1058 [inline] [<000000000cdbf82f>] llc_alloc_frame+0x66/0x110 net/llc/llc_sap.c:54 [<000000002418b52e>] llc_conn_ac_send_sabme_cmd_p_set_x+0x2f/0x140 net/llc/llc_c_ac.c:777 [<000000001372ae17>] llc_exec_conn_trans_actions net/llc/llc_conn.c:475 [inline] [<000000001372ae17>] llc_conn_service net/llc/llc_conn.c:400 [inline] [<000000001372ae17>] llc_conn_state_process+0x1ac/0x640 net/llc/llc_conn.c:75 [<00000000f27e53c1>] llc_establish_connection+0x110/0x170 net/llc/llc_if.c:109 [<00000000291b2ca0>] llc_ui_connect+0x10e/0x370 net/llc/af_llc.c:477 [<000000000f9c740b>] __sys_connect+0x11d/0x170 net/socket.c:1840 [...] The bug is that most callers of llc_conn_send_pdu() assume it consumes a reference to the skb, when actually due to commit b85ab56c ("llc: properly handle dev_queue_xmit() return value") it doesn't. Revert most of that commit, and instead make the few places that need llc_conn_send_pdu() to *not* consume a reference call skb_get() before. Fixes: b85ab56c ("llc: properly handle dev_queue_xmit() return value") Reported-by: syzbot+6b825a6494a04cc0e3f7@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
commit c6ee11c3 upstream. syzbot reported: BUG: memory leak unreferenced object 0xffff888116270800 (size 224): comm "syz-executor641", pid 7047, jiffies 4294947360 (age 13.860s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 20 e1 2a 81 88 ff ff 00 40 3d 2a 81 88 ff ff . .*.....@=*.... backtrace: [<000000004d41b4cc>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<000000004d41b4cc>] slab_post_alloc_hook mm/slab.h:439 [inline] [<000000004d41b4cc>] slab_alloc_node mm/slab.c:3269 [inline] [<000000004d41b4cc>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579 [<00000000506a5965>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198 [<000000001ba5a161>] alloc_skb include/linux/skbuff.h:1058 [inline] [<000000001ba5a161>] alloc_skb_with_frags+0x5f/0x250 net/core/skbuff.c:5327 [<0000000047d9c78b>] sock_alloc_send_pskb+0x269/0x2a0 net/core/sock.c:2225 [<000000003828fe54>] sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2242 [<00000000e34d94f9>] llc_ui_sendmsg+0x10a/0x540 net/llc/af_llc.c:933 [<00000000de2de3fb>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000de2de3fb>] sock_sendmsg+0x54/0x70 net/socket.c:671 [<000000008fe16e7a>] __sys_sendto+0x148/0x1f0 net/socket.c:1964 [...] The bug is that llc_sap_state_process() always takes an extra reference to the skb, but sometimes neither llc_sap_next_state() nor llc_sap_state_process() itself drops this reference. Fix it by changing llc_sap_next_state() to never consume a reference to the skb, rather than sometimes do so and sometimes not. Then remove the extra skb_get() and kfree_skb() from llc_sap_state_process(). Reported-by: syzbot+6bf095f9becf5efef645@syzkaller.appspotmail.com Reported-by: syzbot+31c16aa4202dace3812e@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Sven Eckelmann authored
commit 40e220b4 upstream. Each slave interface of an B.A.T.M.A.N. IV virtual interface has an OGM packet buffer which is initialized using data from netdevice notifier and other rtnetlink related hooks. It is sent regularly via various slave interfaces of the batadv virtual interface and in this process also modified (realloced) to integrate additional state information via TVLV containers. It must be avoided that the worker item is executed without a common lock with the netdevice notifier/rtnetlink helpers. Otherwise it can either happen that half modified/freed data is sent out or functions modifying the OGM buffer try to access already freed memory regions. Reported-by: syzbot+0cc629f19ccb8534935b@syzkaller.appspotmail.com Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Trond Myklebust authored
commit 79cc5542 upstream. A typo in nfs4_refresh_delegation_stateid() means we're leaking an RCU lock, and always returning a value of 'false'. As the function description states, we were always supposed to return 'true' if a matching delegation was found. Fixes: 12f275cd ("NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID.") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Pelle van Gils authored
commit e6f4e274 upstream. The vega10_odn_update_soc_table() function does not allow the SCLK dependent voltage to be set for power-state 7 to a value below the default in pptable. Change the for-loop condition to allow undervolting in the highest state. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205277Signed-off-by:
Pelle van Gils <pelle@vangils.xyz> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Tony Lindgren authored
commit bacdcb66 upstream. Yegor Yefremov <yegorslists@googlemail.com> reported that musb and ftdi uart can fail for the first open of the uart unless connected using a hub. This is because the first dma call done by musb_ep_program() must wait if cppi41 is PM runtime suspended. Otherwise musb_ep_program() continues with other non-dma packets before the DMA transfer is started causing at least ftdi uarts to fail to receive data. Let's fix the issue by waking up cppi41 with PM runtime calls added to cppi41_dma_prep_slave_sg() and return NULL if still idled. This way we have musb_ep_program() continue with PIO until cppi41 is awake. Fixes: fdea2d09 ("dmaengine: cppi41: Add basic PM runtime support") Reported-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v4.9+ Link: https://lore.kernel.org/r/20191023153138.23442-1-tony@atomide.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Jeffrey Hugo authored
commit 76678193 upstream. bam_dma_terminate_all() will leak resources if any of the transactions are committed to the hardware (present in the desc fifo), and not complete. Since bam_dma_terminate_all() does not cause the hardware to be updated, the hardware will still operate on any previously committed transactions. This can cause memory corruption if the memory for the transaction has been reassigned, and will cause a sync issue between the BAM and its client(s). Fix this by properly updating the hardware in bam_dma_terminate_all(). Fixes: e7c0fe2a ("dmaengine: add Qualcomm BAM dma driver") Signed-off-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191017152606.34120-1-jeffrey.l.hugo@gmail.comSigned-off-by:
-
Laura Abbott authored
commit 8c55dedb upstream. Nicolas Waisman noticed that even though noa_len is checked for a compatible length it's still possible to overrun the buffers of p2pinfo since there's no check on the upper bound of noa_num. Bound noa_num against P2P_MAX_NOA_NUM. Reported-by:
Nicolas Waisman <nico@semmle.com> Signed-off-by:
Laura Abbott <labbott@redhat.com> Acked-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Catalin Marinas authored
commit aa57157b upstream. Shared and writable mappings (__S.1.) should be clean (!dirty) initially and made dirty on a subsequent write either through the hardware DBM (dirty bit management) mechanism or through a write page fault. A clean pte for the arm64 kernel is one that has PTE_RDONLY set and PTE_DIRTY clear. The PAGE_SHARED{,_EXEC} attributes have PTE_WRITE set (PTE_DBM) and PTE_DIRTY clear. Prior to commit 73e86cb0 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()"), it was the responsibility of set_pte_at() to set the PTE_RDONLY bit and mark the pte clean if the software PTE_DIRTY bit was not set. However, the above commit removed the pte_sw_dirty() check and the subsequent setting of PTE_RDONLY in set_pte_at() while leaving the PAGE_SHARED{,_EXEC} definitions unchanged. The result is that shared+writable mappings are now dirty by default Fix the above by explicitly setting PTE_RDONLY in PAGE_SHARED{,_EXEC}. In addition, remove the superfluous PTE_DIRTY bit from the kernel PROT_* attributes. Fixes: 73e86cb0 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()") Cc: <stable@vger.kernel.org> # 4.14.x- Cc: Will Deacon <will@kernel.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Heiko Carstens authored
commit 3d7efa4e upstream. The idle time reported in /proc/stat sometimes incorrectly contains huge values on s390. This is caused by a bug in arch_cpu_idle_time(). The kernel tries to figure out when a different cpu entered idle by accessing its per-cpu data structure. There is an ordering problem: if the remote cpu has an idle_enter value which is not zero, and an idle_exit value which is zero, it is assumed it is idle since "now". The "now" timestamp however is taken before the idle_enter value is read. Which in turn means that "now" can be smaller than idle_enter of the remote cpu. Unconditionally subtracting idle_enter from "now" can thus lead to a negative value (aka large unsigned value). Fix this by moving the get_tod_clock() invocation out of the loop. While at it also make the code a bit more readable. A similar bug also exists for show_idle_time(). Fix this is as well. Cc: <stable@vger.kernel.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Yihui ZENG authored
commit b8e51a6a upstream. The problem is that we were putting the NUL terminator too far: buf[sizeof(buf) - 1] = '\0'; If the user input isn't NUL terminated and they haven't initialized the whole buffer then it leads to an info leak. The NUL terminator should be: buf[len - 1] = '\0'; Signed-off-by:
Yihui Zeng <yzeng56@asu.edu> Cc: stable@vger.kernel.org Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> [heiko.carstens@de.ibm.com: keep semantics of how *lenp and *ppos are handled] Signed-off-by:
-
Markus Theil authored
commit 1fab1b89 upstream. Mesh path nexthop should be a ethernet address, but current validation checks against 4 byte integers. Cc: stable@vger.kernel.org Fixes: 2ec600d6 ("nl80211/cfg80211: support for mesh, sta dumping") Signed-off-by:
Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20191029093003.10355-1-markus.theil@tu-ilmenau.deSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Michał Mirosław authored
commit b3a81c77 upstream. On HID report descriptor parsing error the code displays bogus pointer instead of error offset (subtracts start=NULL from end). Make the message more useful by displaying correct error offset and include total buffer size for reference. This was carried over from ancient times - "Fixed" commit just promoted the message from DEBUG to ERROR. Cc: stable@vger.kernel.org Fixes: 8c3d52fc ("HID: make parser more verbose about parsing errors by default") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Alan Stern authored
commit d9d4b1e4 upstream. The syzbot fuzzer found a slab-out-of-bounds write bug in the hid-gaff driver. The problem is caused by the driver's assumption that the device must have an input report. While this will be true for all normal HID input devices, a suitably malicious device can violate the assumption. The same assumption is present in over a dozen other HID drivers. This patch fixes them by checking that the list of hid_inputs for the hid_device is nonempty before allowing it to be used. Reported-and-tested-by: syzbot+403741a091bf41d4ae79@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit 09f3dbe4 upstream. The Primebook C11B uses the SIPODEV SP1064 touchpad. There are 2 versions of this 2-in-1 and the touchpad in the older version does not supply descriptors, so it has to be added to the override list. Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit fc5b220b upstream. Use the pointer 'p' after having tested that pointer instead of before. Fixes: 5cadafb2 ("target/cxgbit: Fix endianness annotations") Cc: Varun Prakash <varun@chelsio.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191023202150.22173-1-bvanassche@acm.orgReported-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Johan Hovold authored
commit 84968291 upstream. Add missing endianness conversion when setting the line speed so that this driver might work also on big-endian machines. Also use an unsigned format specifier in the corresponding debug message. Signed-off-by:
-
Johan Hovold authored
commit 1251dab9 upstream. Fix a user-controlled slab buffer overflow due to a missing sanity check on the bulk-out transfer buffer used for control requests. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ben Dooks (Codethink) authored
commit d5501d5c upstream. It looks like some of the xhci debug code is passing u32 to functions directly from __le32/__le64 fields. Fix this by using le{32,64}_to_cpu() on these to fix the following sparse warnings; xhci-debugfs.c:205:62: warning: incorrect type in argument 1 (different base types) xhci-debugfs.c:205:62: expected unsigned int [usertype] field0 xhci-debugfs.c:205:62: got restricted __le32 xhci-debugfs.c:206:62: warning: incorrect type in argument 2 (different base types) xhci-debugfs.c:206:62: expected unsigned int [usertype] field1 xhci-debugfs.c:206:62: got restricted __le32 ... [Trim down commit message, sparse warnings were similar -Mathias] Cc: <stable@vger.kernel.org> # 4.15+ Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1572013829-14044-4-git-send-email-mathias.nyman@linux.intel.comSigned-off-by:
-
Johan Hovold authored
commit 52403cfb upstream. USB control-message timeouts are specified in milliseconds, not jiffies. Waiting 83 minutes for a transfer to complete is a bit excessive. Fixes: 2824bd25 ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reported-by: syzbot+a4fbb3bb76cda0ea4e58@syzkaller.appspotmail.com Signed-off-by:
-
