IV size was zero on CBC and CTR modes,
causing a bug triggered by skcipher.

Fixing this  adding a correct size.
Signed-off-by: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Paulo Smorigo <pfsmorigo@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When buffer 0 is used we should use buflen_0 instead of buflen_1.

Fix it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

cryptd_create_hash() fails by returning -EINVAL.  It is because after
8996eafd ("crypto: ahash - ensure statesize is non-zero") all ahash
drivers must have a non-zero statesize.

This patch fixes the problem by properly assigning the statesize.
Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ghash_clmulni_intel fails to load on Linux 4.3+ with the following message:
"modprobe: ERROR: could not insert 'ghash_clmulni_intel': Invalid argument"

After 8996eafd ("crypto: ahash - ensure statesize is non-zero") all ahash
drivers are required to implement import()/export(), and must have a non-
zero statesize.

This patch has been tested with the algif_hash interface. The calculated
digest values, after several rounds of import()s and export()s, match those
calculated by tcrypt.
Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Lockdep warns about a possible deadlock resulting from the use of regular
spin_locks:

=================================
[ INFO: inconsistent lock state ]
4.4.0-rc2+ #2724 Not tainted
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/0/3 [HC0[0]:SC1[1]:HE1:SE0] takes:
(&(&crypto_info->lock)->rlock){+.?...}, at: [<bf14a65c>] rk_crypto_tasklet_cb+0x24/0xb4 [rk_crypto]
{SOFTIRQ-ON-W} state was registered at:
  [<c007f4ac>] lock_acquire+0x178/0x218
  [<c0759bac>] _raw_spin_lock+0x54/0x64
  [<bf14af88>] rk_handle_req+0x7c/0xbc [rk_crypto]
  [<bf14b040>] rk_des_ecb_encrypt+0x2c/0x30 [rk_crypto]
  [<bf14b05c>] rk_aes_ecb_encrypt+0x18/0x1c [rk_crypto]
  [<c028c820>] skcipher_encrypt_ablkcipher+0x64/0x68
  [<c0290770>] __test_skcipher+0x2a8/0x8dc
  [<c0292e94>] test_skcipher+0x38/0xc4
  [<c0292fb0>] alg_test_skcipher+0x90/0xb0
  [<c0292158>] alg_test+0x1e8/0x280
  [<c028f6f4>] cryptomgr_test+0x34/0x54
  [<c004bbe8>] kthread+0xf4/0x10c
  [<c0010010>] ret_from_fork+0x14/0x24
irq event stamp: 10672
hardirqs last  enabled at (10672): [<c002fac8>] tasklet_action+0x48/0x104
hardirqs last disabled at (10671): [<c002faa0>] tasklet_action+0x20/0x104
softirqs last  enabled at (10658): [<c002ef84>] __do_softirq+0x358/0x49c
softirqs last disabled at (10669): [<c002f108>] run_ksoftirqd+0x40/0x80

other info that might help us debug this:
Possible unsafe locking scenario:

    CPU0
    ----
  lock(&(&crypto_info->lock)->rlock);
  <Interrupt>
    lock(&(&crypto_info->lock)->rlock);

 *** DEADLOCK ***

Fix this by moving to irq-disabling spinlocks.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng kthread can be waiting via hwrng_fillfn for some data from a rng
like virtio-rng:
hwrng           D ffff880093e17798     0   382      2 0x00000000
...
Call Trace:
 [<ffffffff817339c6>] wait_for_completion_killable+0x96/0x210
 [<ffffffffa00aa1b7>] virtio_read+0x57/0xf0 [virtio_rng]
 [<ffffffff814f4a35>] hwrng_fillfn+0x75/0x130
 [<ffffffff810aa243>] kthread+0xf3/0x110

And when some user program tries to read the /dev node in this state,
we get:
rngd            D ffff880093e17798     0   762      1 0x00000004
...
Call Trace:
 [<ffffffff817351ac>] mutex_lock_nested+0x15c/0x3e0
 [<ffffffff814f478e>] rng_dev_read+0x6e/0x240
 [<ffffffff81231958>] __vfs_read+0x28/0xe0
 [<ffffffff81232393>] vfs_read+0x83/0x130

And this is indeed unkillable. So use mutex_lock_interruptible
instead of mutex_lock in rng_dev_read and exit immediatelly when
interrupted. And possibly return already read data, if any (as POSIX
allows).

v2: use ERESTARTSYS instead of EINTR
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: <linux-crypto@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The <linux/crypto.h> provides inline function - crypto_skcipher_type().
Let's use it in the cryptd_alloc_ablkcipher() instead of direct calculation.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Crypto driver support:
     ecb(aes) cbc(aes) ecb(des) cbc(des) ecb(des3_ede) cbc(des3_ede)
You can alloc tags above in your case.

And other algorithms and platforms will be added later on.
Signed-off-by: Zain Wang <zain.wang@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add DT bindings documentation for the rk3288 crypto drivers.
Signed-off-by: Zain Wang <zain.wang@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

use of_propert_read_u32() for reading int value,
it can help reducing number of variables used
Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use offset_in_page macro instead of (addr & ~PAGE_MASK).
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A typo in the Makefile leaves qat_rsaprivkey-asn1.h hanging around.
Signed-off-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The unsigned int variables [src|dst]_nents and nents can be assigned
signed value (-EINVAL) from sg_nents_for_len().
Furthermore they are used only by dma_map_sg and dma_unmap_sg which wait
for an signed int, so they must be set as int.

Fixes: f051f95e ("crypto: picoxcell - check return value of sg_nents_for_len")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The two unsigned int variables nb_in_sg and nb_out_sg can be assigned
signed value (-EINVAL) from sg_nents_for_len().
Furthermore they are used only by dma_map_sg and dma_unmap_sg which wait
for an signed int, so they must be set as int.

Fixes: 6c2b74d4 ("crypto: sahara - check return value of sg_nents_for_len")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We cannot put the HW RNG to idle using a timer because we cannot disable
clocks from atomic context. Use a delayed work instead.

Fixes a warning with CONFIG_DEBUG_MUTEXES on Nokia N900 during boot.
Reported-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The Atmel at91 crypto driver unconditionally selects AT_HDMAC,
which results in a Kconfig warning if that driver is not enabled:

warning: (CRYPTO_DEV_ATMEL_AES) selects AT_HDMAC which has unmet direct dependencies (DMADEVICES && ARCH_AT91)

The crypto driver itself does not actually have a dependency
on a particular dma engine, other than this being the one that
is used in at91.

Removing the 'select' gets rid of the warning, but can cause
the driver to be unusable if the HDMAC is not enabled at the
same time. To work around that, this patch clarifies the runtime
dependency to be 'AT_HDMAC || AT_XDMAC', but adds an alternative
for COMPILE_TEST, which lets the driver get build on all systems.

The ARCH_AT91 dependency is implied by AT_XDMAC || AT_HDMAC now
and no longer needs to be listed separately.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The key sizes used by AES in GCM mode should be 128, 192 or 256 bits (16,
24 or 32 bytes).
There is no additional 4byte nonce as for RFC 4106.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The atmel AES driver assumes that 'int' and 'size_t' are the same
type in multiple locations, which the compiler warns about when
building it for 64-bit systems:

In file included from ../drivers/crypto/atmel-aes.c:17:0:
drivers/crypto/atmel-aes.c: In function 'atmel_aes_sg_copy':
include/linux/kernel.h:724:17: warning: comparison of distinct pointer types lacks a cast
drivers/crypto/atmel-aes.c:448:11: note: in expansion of macro 'min'

drivers/crypto/atmel-aes.c: In function 'atmel_aes_crypt_dma_stop':
include/linux/kern_levels.h:4:18: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'size_t {aka long unsigned int}' [-Wformat=]

This changes the format strings to use the %z modifier when printing
a size_t, and makes sure that we use the correct size_t type where
needed. In case of sg_dma_len(), the type of the result depends
on CONFIG_NEED_SG_DMA_LENGTH, so we have to use min_t to get it to
work in all configurations.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify mcryptd_opportunistic_flush() with list_first_entry_or_null().
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify crypto_more_spawns() with list_first_entry_or_null()
and list_next_entry().
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sun4i-ss implementaton of md5/sha1 is via ahash algorithms.
Commit 8996eafd ("crypto: ahash - ensure statesize is non-zero")
made impossible to load them without giving statesize. This patch
specifiy statesize for sha1 and md5.

Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Cc: <stable@vger.kernel.org> # v4.3+
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The dma_pool_destroy() function tests whether its argument is NULL
and then returns immediately. Thus the test around the calls is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This pci_error_handlers structure is never modified, like all the other
pci_error_handlers structures, so declare it as const.

Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

rhe RSA operations explicitly left-align the integers being written
skipping any leading zero bytes, but still require the output buffers to
include just enough space for the integer + the leading zero bytes.
Since the size of integer + the leading zero bytes (i.e. the key modulus
size) can now be obtained more easily through crypto_akcipher_maxsize
change the operations to only require as big a buffer as actually needed
if the caller has that information.  The semantics for request->dst_len
don't change.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since mpi_write_to_sgl and mpi_read_buffer explicitly left-align the
integers being written it makes no sense to require a buffer big enough for
the number + the leading zero bytes which are not written.  The error
returned also doesn't convey any information.  So instead require only the
size needed and return -EOVERFLOW to signal when buffer too short.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sg_nents_for_len() function could fail, this patch add a check for
its return value.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sg_nents_for_len() function could fail, this patch add a check for
its return value.
We do the same for sg_count since it use sg_nents_for_len().
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sg_nents_for_len() function could fail, this patch add a check for
its return value.
In the same time, we remove sg_count() as it is used as an alias of
sg_nents_for_len.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sg_nents_for_len() function could fail, this patch add a check for
its return value.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sg_nents_for_len() function could fail, this patch add a check for
its return value.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sg_nents_for_len() function could fail, this patch add a check for
its return value.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sg_nents_for_len() function could fail, this patch add a check for
its return value.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some variable are set as int but store only positive values.
Furthermore there are used in operation/function that wait for unsigned
value.
This patch set them as size_t.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

- ent->device is already checked at the beginning of the function
   against the same value. This check is a duplicate.
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix the logic in case we have found a device on a given node.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The hifn_795x driver is old and have lots of style issue.
This patch try to solve easy ones.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replace all printk by their dev_xx/pr_xx counterpart.
The patch remove also all custom dprintk by pr_debug/dev_debug
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The hifn_test function is redundant with test done at register time by
the crypto API, so remove it.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When stopping all devices make sure VFs are stopped before the
corresponding PF.
VFs will always be after PF so just need to loop back.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Using non-constant time memcmp() makes the verification of the authentication
tag in the decrypt path vulnerable to timing attacks. Fix this by using
crypto_memneq() instead.

Cc: stable@vger.kernel.org
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>