1. 02 Nov, 2009 1 commit
  2. 30 Oct, 2009 8 commits
  3. 13 Oct, 2009 7 commits
  4. 11 Oct, 2009 1 commit
  5. 10 Oct, 2009 1 commit
    • Robert Hancock's avatar
      ALSA: ice1724: Fix surround on Chaintech AV-710 · 43189a38
      Robert Hancock authored
      Fix the num_total_dacs setting for Chaintech AV710. The existing comment
      that only PSDOUT0 is connected is correct, but since the card is using
      packed AC97 mode to send 6 channels to the codec, num_total_dacs should be
      set to 6 and not 2. This allows 6-channel surround to work. Also clarify
      a comment regarding the additional WM8728 codec on this card (it's connected
      to the SPDIF output and always receives the same data).
      Signed-off-by: default avatarRobert Hancock <hancockrwd@gmail.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      43189a38
  6. 09 Oct, 2009 1 commit
  7. 08 Oct, 2009 5 commits
    • Takashi Iwai's avatar
      Merge branch 'fix/misc' into for-linus · 378e869f
      Takashi Iwai authored
      378e869f
    • Takashi Iwai's avatar
      Merge branch 'fix/hda' into for-linus · d2a764dd
      Takashi Iwai authored
      d2a764dd
    • Robert Hancock's avatar
      ALSA: ice1724: increase SPDIF and independent stereo buffer sizes · 1d4efa66
      Robert Hancock authored
      Increase the default and maximum PCM buffer prellocation size for ice1724's
      SPDIF and independent stereo pair outputs to 256K, which is the hardware's
      maximum supported size. This allows a reduction in interrupt rate and
      potentially power usage when an application is not latency-critical.
      Signed-off-by: default avatarRobert Hancock <hancockrwd@gmail.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      1d4efa66
    • Krzysztof Helt's avatar
      ALSA: opl3: circular locking in the snd_opl3_note_on() and snd_opl3_note_off() · 8dce39b8
      Krzysztof Helt authored
      Fix following circular locking in the opl3 driver.
      
      =======================================================
      [ INFO: possible circular locking dependency detected ]
      2.6.32-rc3 #87
      -------------------------------------------------------
      swapper/0 is trying to acquire lock:
       (&opl3->voice_lock){..-...}, at: [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
      
      but task is already holding lock:
       (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth]
      
      which lock already depends on the new lock.
      
      the existing dependency chain (in reverse order) is:
      
      -> #1 (&opl3->sys_timer_lock){..-...}:
             [<c02461d5>] validate_chain+0xa25/0x1040
             [<c0246aca>] __lock_acquire+0x2da/0xab0
             [<c024731a>] lock_acquire+0x7a/0xa0
             [<c044c300>] _spin_lock_irqsave+0x40/0x60
             [<cca75046>] snd_opl3_note_on+0x686/0x790 [snd_opl3_synth]
             [<cca68912>] snd_midi_process_event+0x322/0x590 [snd_seq_midi_emul]
             [<cca74245>] snd_opl3_synth_event_input+0x15/0x20 [snd_opl3_synth]
             [<cca4dcc0>] snd_seq_deliver_single_event+0x100/0x200 [snd_seq]
             [<cca4de07>] snd_seq_deliver_event+0x47/0x1f0 [snd_seq]
             [<cca4e50b>] snd_seq_dispatch_event+0x3b/0x140 [snd_seq]
             [<cca5008c>] snd_seq_check_queue+0x10c/0x120 [snd_seq]
             [<cca5037b>] snd_seq_enqueue_event+0x6b/0xe0 [snd_seq]
             [<cca4e0fd>] snd_seq_client_enqueue_event+0xdd/0x100 [snd_seq]
             [<cca4eb7a>] snd_seq_write+0xea/0x190 [snd_seq]
             [<c02827b6>] vfs_write+0x96/0x160
             [<c0282c9d>] sys_write+0x3d/0x70
             [<c0202c45>] syscall_call+0x7/0xb
      
      -> #0 (&opl3->voice_lock){..-...}:
             [<c02467e6>] validate_chain+0x1036/0x1040
             [<c0246aca>] __lock_acquire+0x2da/0xab0
             [<c024731a>] lock_acquire+0x7a/0xa0
             [<c044c300>] _spin_lock_irqsave+0x40/0x60
             [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
             [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth]
             [<c022ac46>] run_timer_softirq+0x166/0x1e0
             [<c02269e8>] __do_softirq+0x78/0x110
             [<c0226ac6>] do_softirq+0x46/0x50
             [<c0226e26>] irq_exit+0x36/0x40
             [<c0204bd2>] do_IRQ+0x42/0xb0
             [<c020328e>] common_interrupt+0x2e/0x40
             [<c021092f>] apm_cpu_idle+0x10f/0x290
             [<c0201b11>] cpu_idle+0x21/0x40
             [<c04443cd>] rest_init+0x4d/0x60
             [<c055c835>] start_kernel+0x235/0x280
             [<c055c066>] i386_start_kernel+0x66/0x70
      
      other info that might help us debug this:
      
      2 locks held by swapper/0:
       #0:  (&opl3->tlist){+.-...}, at: [<c022abd0>] run_timer_softirq+0xf0/0x1e0
       #1:  (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth]
      
      stack backtrace:
      Pid: 0, comm: swapper Not tainted 2.6.32-rc3 #87
      Call Trace:
       [<c0245188>] print_circular_bug+0xc8/0xd0
       [<c02467e6>] validate_chain+0x1036/0x1040
       [<c0247f14>] ? check_usage_forwards+0x54/0xd0
       [<c0246aca>] __lock_acquire+0x2da/0xab0
       [<c024731a>] lock_acquire+0x7a/0xa0
       [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
       [<c044c300>] _spin_lock_irqsave+0x40/0x60
       [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
       [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
       [<c044c307>] ? _spin_lock_irqsave+0x47/0x60
       [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth]
       [<c022ac46>] run_timer_softirq+0x166/0x1e0
       [<c022abd0>] ? run_timer_softirq+0xf0/0x1e0
       [<cca75150>] ? snd_opl3_timer_func+0x0/0xc0 [snd_opl3_synth]
       [<c02269e8>] __do_softirq+0x78/0x110
       [<c044c0fd>] ? _spin_unlock+0x1d/0x20
       [<c025915f>] ? handle_level_irq+0xaf/0xe0
       [<c0226ac6>] do_softirq+0x46/0x50
       [<c0226e26>] irq_exit+0x36/0x40
       [<c0204bd2>] do_IRQ+0x42/0xb0
       [<c024463c>] ? trace_hardirqs_on_caller+0x12c/0x180
       [<c020328e>] common_interrupt+0x2e/0x40
       [<c0208d88>] ? default_idle+0x38/0x50
       [<c021092f>] apm_cpu_idle+0x10f/0x290
       [<c0201b11>] cpu_idle+0x21/0x40
       [<c04443cd>] rest_init+0x4d/0x60
       [<c055c835>] start_kernel+0x235/0x280
       [<c055c210>] ? unknown_bootoption+0x0/0x210
       [<c055c066>] i386_start_kernel+0x66/0x70
      Signed-off-by: default avatarKrzysztof Helt <krzysztof.h1@wp.pl>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      8dce39b8
    • Pavel Hofman's avatar
      ALSA: ICE1712/24 - Change the Multi Track Peak control (level meters) from MIXER to PCM type · 2bdf6633
      Pavel Hofman authored
      * PLEASE NOTE - this change requires the corresponding update of
        envy24control for ice1712 - kind of an ABI change.
      * The "Multi Track Peak" control is read-only level meters indicator.
      * The control is VERY confusing to most users since it is currently displayed
        in regular mixers. E.g. alsamixer ignores its read-only status
        and allows changing the levels with keys which makes no sense.
      Signed-off-by: default avatarPavel Hofman <pavel.hofman@ivitera.com>
      Acked-by: default avatarJaroslav Kysela <perex@perex.cz>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      2bdf6633
  8. 07 Oct, 2009 1 commit
  9. 06 Oct, 2009 7 commits
  10. 05 Oct, 2009 2 commits
    • Takashi Iwai's avatar
      ALSA: hda - Fix invalid initializations for ALC861 auto mode · 15870f05
      Takashi Iwai authored
      The recent auto-parser doesn't work for machines with a single output
      with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets
      the hp_pins[0] while it's listed in line_outs[0].
      This ends up with the doubled initialization of the same mixer widget,
      and it mutes the DAC route because hp_pins has no DAC assigned.
      
      To fix this problem, just check spec->autocfg.hp_outs and speaker_outs
      so that they are really detected pins.
      
      Reference: Novell bnc#544161
      	http://bugzilla.novell.com/show_bug.cgi?id=544161Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      15870f05
    • Linus Torvalds's avatar
      Linux 2.6.32-rc3 · 374576a8
      Linus Torvalds authored
      I'm skipping -rc2 because the -rc1 Makefile mistakenly said -rc2, so in
      order to avoid confusion, I'm jumping from -rc1 to -rc3.  That way, when
      'uname' (or an oops report) says 2.6.32-rc2, there's no confusion about
      whether people perhaps meant -rc1 or -rc2.
      374576a8
  11. 04 Oct, 2009 6 commits