Restrict map value pointer arithmetic for unprivileged users in that
arithmetic itself must not go out of bounds as opposed to the actual
access later on. Therefore after each adjust_ptr_min_max_vals() with a
map value pointer as a destination it will simulate a check_map_access()
of 1 byte on the destination and once that fails the program is rejected
for unprivileged program loads. We use this later on for masking any
pointer arithmetic with the remainder of the map value space. The
likelihood of breaking any existing real-world unprivileged eBPF
program is very small for this corner case.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Right now we are using BPF ax register in JIT for constant blinding as
well as in interpreter as temporary variable. Verifier will not be able
to use it simply because its use will get overridden from the former in
bpf_jit_blind_insn(). However, it can be made to work in that blinding
will be skipped if there is prior use in either source or destination
register on the instruction. Taking constraints of ax into account, the
verifier is then open to use it in rewrites under some constraints. Note,
ax register already has mappings in every eBPF JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This change moves the on-stack 64 bit tmp variable in ___bpf_prog_run()
into the hidden ax register. The latter is currently only used in JITs
for constant blinding as a temporary scratch register, meaning the BPF
interpreter will never see the use of ax. Therefore it is safe to use
it for the cases where tmp has been used earlier. This is needed to later
on allow restricted hidden use of ax in both interpreter and JITs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Move prev_insn_idx and insn_idx from the do_check() function into
the verifier environment, so they can be read inside the various
helper functions for handling the instructions. It's easier to put
this into the environment rather than changing all call-sites only
to pass it along. insn_idx is useful in particular since this later
on allows to hold state in env->insn_aux_data[env->insn_idx].
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

As a simple fix, just print the correct map type.
Signed-off-by: Xiaozhou Liu <liuxiaozhou@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit 33a48ab1 ("ibmveth: Fix DMA unmap error") fixed an issue in the
normal code path of ibmveth_xmit_start() that was originally introduced by
Commit 6e8ab30e ("ibmveth: Add scatter-gather support"). This original
fix missed the error path where dma_unmap_page is wrongly called on the
header portion in descs[0] which was mapped with dma_map_single. As a
result a failure to DMA map any of the frags results in a dmesg warning
when CONFIG_DMA_API_DEBUG is enabled.

------------[ cut here ]------------
DMA-API: ibmveth 30000002: device driver frees DMA memory with wrong function
  [device address=0x000000000a430000] [size=172 bytes] [mapped as page] [unmapped as single]
WARNING: CPU: 1 PID: 8426 at kernel/dma/debug.c:1085 check_unmap+0x4fc/0xe10
...
<snip>
...
DMA-API: Mapped at:
ibmveth_start_xmit+0x30c/0xb60
dev_hard_start_xmit+0x100/0x450
sch_direct_xmit+0x224/0x490
__qdisc_run+0x20c/0x980
__dev_queue_xmit+0x1bc/0xf20

This fixes the API misuse by unampping descs[0] with dma_unmap_single.

Fixes: 6e8ab30e ("ibmveth: Add scatter-gather support")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In rtl8169_runtime_resume() we configure WoL but don't set the device
to wakeup-enabled. This prevents PME generation once the cable is
re-plugged. Fix this by moving the call to device_set_wakeup_enable()
to __rtl8169_set_wol().

Fixes: 433f9d0d ("r8169: improve saved_wolopts handling")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nr_find_socket(), nr_find_peer() and nr_find_listener() lock the
sock after finding it in the global list. However, the call path
requires BH disabled for the sock lock consistently.

Actually the locking is unnecessary at this point, we can just hold
the sock refcnt to make sure it is not gone after we unlock the global
list, and lock it later only when needed.

Reported-and-tested-by: syzbot+f621cda8b7e598908efa@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When x25_asy_open() fails, it already cleans up by itself,
so its caller doesn't need to free the memory again.

It seems we still have to call x25_asy_free() to clear the SLF_INUSE
bit, so just set these pointers to NULL after kfree().

Reported-and-tested-by: syzbot+5e5e969e525129229052@syzkaller.appspotmail.com
Fixes: 3b780bed ("x25_asy: Free x25_asy on x25_asy_open() failure.")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are multiple issues here:

1. After freeing dev->ax25_ptr, we need to set it to NULL otherwise
   we may use a dangling pointer.

2. There is a race between ax25_setsockopt() and device notifier as
   reported by syzbot. Close it by holding RTNL lock.

3. We need to test if dev->ax25_ptr is NULL before using it.

Reported-and-tested-by: syzbot+ae6bb869cbed29b29040@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gcc warn this:
net/ipv4/fib_rules.c:203 fib_empty_table() warn:
 always true condition '(id <= 4294967295) => (0-u32max <= u32max)'

'id' is u32, which always not greater than RT_TABLE_MAX
(0xFFFFFFFF), So add a check to break while wrap around.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'ipv6_find_idev()' returns NULL on error, not an error pointer.
Update the test accordingly and return -ENOBUFS, as already done in
'addrconf_add_dev()', if NULL is returned.

Fixes: ("ipv6: allow userspace to add IFA_F_OPTIMISTIC addresses")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

We must have an address to lookup otherwise we'll derefence a null
pointer in the ndo_fdb_get callbacks.

CC: Roopa Prabhu <roopa@cumulusnetworks.com>
CC: David Ahern <dsa@cumulusnetworks.com>
Reported-by: syzbot+017b1f61c82a1c3e7efd@syzkaller.appspotmail.com
Fixes: 5b2f94b2 ("net: rtnetlink: support for fdb get")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net, specifically
fixes for the nf_conncount infrastructure which is causing troubles
since 5c789e13 ("netfilter: nf_conncount: Add list lock and gc
worker, and RCU for init tree search"). Patches aim to simplify this
infrastructure while fixing up the problems:

1) Use fixed size CONNCOUNT_SLOTS in nf_conncount, from Shawn Bohrer.

2) Incorrect signedness in age calculation from find_or_evict(),
   from Florian Westphal.

3) Proper locking for the garbage collector workqueue callback,
   first make a patch to count how many nodes can be collected
   without holding locks, then grab lock and release them. Also
   from Florian.

4) Restart node lookup from the insertion path, after releasing nodes
   via packet path garbage collection. Shawn Bohrer described a scenario
   that may result in inserting a connection in an already dead list
   node. Patch from Florian.

5) Merge lookup and add function to avoid a hold release and re-grab.
   From Florian.

6) Be safe and iterate over the node lists under the spinlock.

7) Speculative list nodes removal via garbage collection, check if
   list node got a connection while it was scheduled for deletion
   via gc.

8) Accidental argument swap in find_next_bit() that leads to more
   frequent scheduling of the workqueue. From Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

These functions are called from atomic context:

[    9.150239] BUG: sleeping function called from invalid context at /home/scott/git/linux/mm/slab.h:421
[    9.158159] in_atomic(): 1, irqs_disabled(): 0, pid: 4432, name: ip
[    9.163128] CPU: 8 PID: 4432 Comm: ip Not tainted 4.20.0-rc2-00169-g63d86876 #29
[    9.163130] Call Trace:
[    9.170701] [c0000002e899a980] [c0000000009c1068] .dump_stack+0xa8/0xec (unreliable)
[    9.177140] [c0000002e899aa10] [c00000000007a7b4] .___might_sleep+0x138/0x164
[    9.184440] [c0000002e899aa80] [c0000000001d5bac] .kmem_cache_alloc_trace+0x238/0x30c
[    9.191216] [c0000002e899ab40] [c00000000065ea1c] .memac_add_hash_mac_address+0x104/0x198
[    9.199464] [c0000002e899abd0] [c00000000065a788] .set_multi+0x1c8/0x218
[    9.206242] [c0000002e899ac80] [c0000000006615ec] .dpaa_set_rx_mode+0xdc/0x17c
[    9.213544] [c0000002e899ad00] [c00000000083d2b0] .__dev_set_rx_mode+0x80/0xd4
[    9.219535] [c0000002e899ad90] [c00000000083d334] .dev_set_rx_mode+0x30/0x54
[    9.225271] [c0000002e899ae10] [c00000000083d4a0] .__dev_open+0x148/0x1c8
[    9.230751] [c0000002e899aeb0] [c00000000083d934] .__dev_change_flags+0x19c/0x1e0
[    9.230755] [c0000002e899af60] [c00000000083d9a4] .dev_change_flags+0x2c/0x80
[    9.242752] [c0000002e899aff0] [c0000000008554ec] .do_setlink+0x350/0xf08
[    9.248228] [c0000002e899b170] [c000000000857ad0] .rtnl_newlink+0x588/0x7e0
[    9.253965] [c0000002e899b740] [c000000000852424] .rtnetlink_rcv_msg+0x3e0/0x498
[    9.261440] [c0000002e899b820] [c000000000884790] .netlink_rcv_skb+0x134/0x14c
[    9.267607] [c0000002e899b8e0] [c000000000851840] .rtnetlink_rcv+0x18/0x2c
[    9.274558] [c0000002e899b950] [c000000000883c8c] .netlink_unicast+0x214/0x318
[    9.281163] [c0000002e899ba00] [c000000000884220] .netlink_sendmsg+0x348/0x444
[    9.287076] [c0000002e899bae0] [c00000000080d13c] .sock_sendmsg+0x2c/0x54
[    9.287080] [c0000002e899bb50] [c0000000008106c0] .___sys_sendmsg+0x2d0/0x2d8
[    9.298375] [c0000002e899bd30] [c000000000811a80] .__sys_sendmsg+0x5c/0xb0
[    9.303939] [c0000002e899be20] [c0000000000006b0] system_call+0x60/0x6c
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

In drivers/isdn/hisax/hfc_pci.c, the functions hfcpci_interrupt() and
HFCPCI_l1hw() may be concurrently executed.

HFCPCI_l1hw()
  line 1173: if (!cs->tx_skb)

hfcpci_interrupt()
  line 942: spin_lock_irqsave();
  line 1066: dev_kfree_skb_irq(cs->tx_skb);

Thus, a possible concurrency use-after-free bug may occur
in HFCPCI_l1hw().

To fix these bugs, the calls to spin_lock_irqsave() and
spin_unlock_irqrestore() are added in HFCPCI_l1hw(), to protect the
access to cs->tx_skb.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The return type for get_regs_len in struct ethtool_ops is int,
the hns3 driver may return error when failing to get the regs
len by sending cmd to firmware.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Size and 'next bit' were swapped, this bug could cause worker to
reschedule itself even if system was idle.

Fixes: 5c789e13 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Instead of removing a empty list node that might be reintroduced soon
thereafter, tentatively place the empty list node on the list passed to
tree_nodes_free(), then re-check if the list is empty again before erasing
it from the tree.

[ Florian: rebase on top of pending nf_conncount fixes ]

Fixes: 5c789e13 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Two CPUs may race to remove a connection from the list, the existing
conn->dead will result in a use-after-free. Use the per-list spinlock to
protect list iterations.

As all accesses to the list now happen while holding the per-list lock,
we no longer need to delay free operations with rcu.

Joint work with Florian.

Fixes: 5c789e13 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

'lookup' is always followed by 'add'.
Merge both and make the list-walk part of nf_conncount_add().

This also avoids one unneeded unlock/re-lock pair.

Extra care needs to be taken in count_tree, as we only hold rcu
read lock, i.e. we can only insert to an existing tree node after
acquiring its lock and making sure it has a nonzero count.

As a zero count should be rare, just fall back to insert_tree()
(which acquires tree lock).

This issue and its solution were pointed out by Shawn Bohrer
during patch review.
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Shawn Bohrer reported a following crash:
 |RIP: 0010:rb_erase+0xae/0x360
 [..]
 Call Trace:
  nf_conncount_destroy+0x59/0xc0 [nf_conncount]
  cleanup_match+0x45/0x70 [ip_tables]
  ...

Shawn tracked this down to bogus 'parent' pointer:
Problem is that when we insert a new node, then there is a chance that
the 'parent' that we found was also passed to tree_nodes_free() (because
that node was empty) for erase+free.

Instead of trying to be clever and detect when this happens, restart
the search if we have evicted one or more nodes.  To prevent frequent
restarts, do not perform gc on the second round.

Also, unconditionally schedule the gc worker.
The condition

  gc_count > ARRAY_SIZE(gc_nodes))

cannot be true unless tree grows very large, as the height of the tree
will be low even with hundreds of nodes present.

Fixes: 5c789e13 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Reported-by: Shawn Bohrer <sbohrer@cloudflare.com>
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The lockless workqueue garbage collector can race with packet path
garbage collector to delete list nodes, as it calls tree_nodes_free()
with the addresses of nodes that might have been free'd already from
another cpu.

To fix this, split gc into two phases.

One phase to perform gc on the connections: From a locking perspective,
this is the same as count_tree(): we hold rcu lock, but we do not
change the tree, we only change the nodes' contents.

The second phase acquires the tree lock and reaps empty nodes.
This avoids a race condition of the garbage collection vs.  packet path:
If a node has been free'd already, the second phase won't find it anymore.

This second phase is, from locking perspective, same as insert_tree().

The former only modifies nodes (list content, count), latter modifies
the tree itself (rb_erase or rb_insert).

Fixes: 5c789e13 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

age is signed integer, so result can be negative when the timestamps
have a large delta.  In this case we want to discard the entry.

Instead of using age >= 2 || age < 0, just make it unsigned.

Fixes: b36e4523 ("netfilter: nf_conncount: fix garbage collection confirm race")
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Most of the time these were the same value anyway, but when
CONFIG_LOCKDEP was enabled we would use a smaller number of locks to
reduce overhead.  Unfortunately having two values is confusing and not
worth the complexity.

This fixes a bug where tree_gc_worker() would only GC up to
CONNCOUNT_LOCK_SLOTS trees which meant when CONFIG_LOCKDEP was enabled
not all trees would be GCed by tree_gc_worker().

Fixes: 5c789e13 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

If nla_nest_start() may fail. The fix checks its return value and goes
to nla_put_failure if it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Correct two minor kerneldoc errors:

 1) missing reference to @mode in struct phy_ops
 2) obsolete reference to @init_data in struct_phy_attrs,
    removed in dbc98635Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) note that gianfar_phy.c was removed years ago
 2) fix obvious copy and paste error in regular doc
 3) change regular doc into kerneldoc for phy_modes()
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes potential double frees if register_hdlc_device() fails.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Peng Hao <peng.hao2@zte.com.cn>
CC: Zhao Qiang <qiang.zhao@nxp.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

When acpi_match_device fails, its return value is NULL. Directly using
the return value without a check may result in a NULL-pointer
dereference. The fix checks if acpi_match_device fails, and if so,
returns -EINVAL.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

genlmsg_put could fail. The fix inserts a check of its return value, and
if it fails, returns -EMSGSIZE.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

atl1e_write_phy_reg() could fail. The fix issues an error message when
it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both bcm_sf2_sw_indir_rw and mdiobus_write_nested could fail, so let's
return their error codes upstream.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

niu_pci_eeprom_read() may fail, so we should check its return value
before using the read data.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cudbg_collect_hw_sched() could fail when the function cudg_get_buffer()
returns an error. The fix adds a check to the latter function returning
error on failure
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

While flushing the cache via  ipv6_sysctl_rtcache_flush(), the call
to proc_dointvec() may fail. The fix adds a check that returns the
error, on failure.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

bearer_disable() already calls kfree_rcu() to free struct tipc_bearer,
we don't need to call kfree() again.

Fixes: cb30a633 ("tipc: refactor function tipc_enable_bearer()")
Reported-by: syzbot+b981acf1fb240c0c128b@syzkaller.appspotmail.com
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>