Enable the clock prior to calling clk_get_rate(), because clk_get_rate()
should only be called if the clock is enabled.

Additionally, prepare/enable the pll_clk before calling clk_get_rate()
for the same reason.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 142168eb ("spi: bcm63xx-hsspi: add bcm63xx HSSPI driver")
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The Exynos5440 is not actively developed, there are no development
boards available and probably there are no real products with it.
Remove wide-tree support for Exynos5440.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This is needed by the spi-mem logic to force all messages that have been
queued before a memory operation to be sent before we start the memory
operation. We do that in order to guarantee that spi-mem operations do
not preempt regular SPI transfers.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

spi_{map,unmap}_buf() are needed by the spi-mem logic that is about to
be introduced to prepare data buffer for DMA operations.

Remove the static specifier on these functions and add their prototypes
to drivers/spi/internals.h. We do not export the symbols here because
both SPI_MEM and SPI can't be enabled as modules and we'd like to
prevent controller/device drivers from using these functions.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Currently the 32-bit device address only is supported for DMA. However,
starting from Intel Sunrisepoint PCH the DMA address of the device FIFO
can be 64-bit.

Change the respective variable to be compatible with DMA engine
expectations, i.e. to phys_addr_t.

Fixes: 34cadd9c ("spi: pxa2xx: Add support for Intel Sunrisepoint")
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Some variants of the SPI controller have no DMA support, in such case
SPI transfers longer than the FIFO length are not currently properly
handled by the driver. Fix it by doing multiple transfers in the
s3c64xx_spi_transfer_one() function if the SPI transfer length exceeds
the FIFO size.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

More references to fifo_len are added in subsequent patch.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fixes: d5898e19 ("spi: pxa2xx: Use core message processing loop")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add a s3c64xx_ prefix to remaining generic function names so it is clear
the code is part of the driver when grepping or looking at debug logs.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

The spi pointer argument is not used now so remove it.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Convert the pump_transfers() transfer tasklet to transfer_one() hook the
SPI core calls to process single transfer instead of handling message
processing and chip select handling in the driver. This not only
simplifies the driver but also brings transfer statistics from the core.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

We are going to rename and modify pump_transfers(). Prepare for it by
removing the string "pump_transfers:" from error and warning prints.

While at it make these user-visible strings single line in sources as it
helps source grepping from error reports.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current DMA engine implementation of pxa2xx_spi_dma_prepare() don't use
the dma_burst argument. Remove it since it became unused after
commit 6356437e ("spi: spi-pxa2xx: remove legacy PXA DMA bits").
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Change indentation so register address offset and register bit definitions
are aligned to same column.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Currently timeout errors in polling I/O mode transfer are silently ignored.
Fix it by returning an error when we time out waiting on the RX FIFO level
to reach the transfer length.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

The channel argument is not used and anyway it could be retrieved from
the passed driver data structure.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

The tgl_spi pointer is now unused so remove it.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds runtime pm functions.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The change updates sh_msiof_spi_set_clk_regs() function by iterating
over BRDV power values. Note that the change is a functional one, namely
prescaler output x 1/1 set in BRDV bit field (0b111) for MSO division
rate set to 2 is substituted by BRDV = 0b000 and BRPS = 0b0, in terms
of written values to TSCR setting of 0x0107 is substituted by 0x0000,
and for all input parameter cases this is the only functional change,
which touches the controller.

As a result of the rework the function is supposed to be slightly more
efficient and more readable and maintainable in case of any further
extensions.
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

clk_get_rate() is below clk_prepare_enable(), so
its error should lead to goto err_clk_disable, not to err_master_put.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The change fixes a bit field overflow which allows to write to higher
bits while calculating SPI transfer clock and setting BRPS and BRDV
bit fields, the problem is reproduced if 'parent_rate' to 'spi_hz'
ratio is greater than 1024, for instance

  p->min_div      = 2,
  MSO rate        = 33333333,
  SPI device rate = 10000

results in

  k          = 5, i.e. BRDV = 0b100 or 1/32 prescaler output,
  BRPS       = 105,
  TSCR value = 0x6804, thus MSSEL and MSIMM bit fields are non-zero.

Fixes: 65d5665b ("spi: sh-msiof: Update calculation of frequency dividing")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Now i.MX SPI controller can work in Slave mode.
Update MODULE_DESCRIPTION to "SPI Controller driver".
Signed-off-by: wangbo <wang.bo116@zte.com.cn>
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull virtio update from Michael Tsirkin:
 "This adds reporting hugepage stats to virtio-balloon"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: export hugetlb page allocation counts

Pull IOMMU updates from Joerg Roedel:

 - OF_IOMMU support for the Rockchip iommu driver so that it can use
   generic DT bindings

 - rework of locking in the AMD IOMMU interrupt remapping code to make
   it work better in RT kernels

 - support for improved iotlb flushing in the AMD IOMMU driver

 - support for 52-bit physical and virtual addressing in the ARM-SMMU

 - various other small fixes and cleanups

* tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits)
  iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t
  iommu/rockchip: Support sharing IOMMU between masters
  iommu/rockchip: Add runtime PM support
  iommu/rockchip: Fix error handling in init
  iommu/rockchip: Use OF_IOMMU to attach devices automatically
  iommu/rockchip: Use IOMMU device for dma mapping operations
  dt-bindings: iommu/rockchip: Add clock property
  iommu/rockchip: Control clocks needed to access the IOMMU
  iommu/rockchip: Fix TLB flush of secondary IOMMUs
  iommu/rockchip: Use iopoll helpers to wait for hardware
  iommu/rockchip: Fix error handling in attach
  iommu/rockchip: Request irqs in rk_iommu_probe()
  iommu/rockchip: Fix error handling in probe
  iommu/rockchip: Prohibit unbind and remove
  iommu/amd: Return proper error code in irq_remapping_alloc()
  iommu/amd: Make amd_iommu_devtable_lock a spin_lock
  iommu/amd: Drop the lock while allocating new irq remap table
  iommu/amd: Factor out setting the remap table for a devid
  iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga()
  iommu/amd: Remove the special case from alloc_irq_table()
  ...

Pull more power management updates from Rafael Wysocki:
 "These include one big-ticket item which is the rework of the idle loop
  in order to prevent CPUs from spending too much time in shallow idle
  states. It reduces idle power on some systems by 10% or more and may
  improve performance of workloads in which the idle loop overhead
  matters. This has been in the works for several weeks and it has been
  tested and reviewed quite thoroughly.

  Also included are changes that finalize the cpufreq cleanup moving
  frequency table validation from drivers to the core, a few fixes and
  cleanups of cpufreq drivers, a cpuidle documentation update and a PM
  QoS core update to mark the expected switch fall-throughs in it.

  Specifics:

   - Rework the idle loop in order to prevent CPUs from spending too
     much time in shallow idle states by making it stop the scheduler
     tick before putting the CPU into an idle state only if the idle
     duration predicted by the idle governor is long enough.

     That required the code to be reordered to invoke the idle governor
     before stopping the tick, among other things (Rafael Wysocki,
     Frederic Weisbecker, Arnd Bergmann).

   - Add the missing description of the residency sysfs attribute to the
     cpuidle documentation (Prashanth Prakash).

   - Finalize the cpufreq cleanup moving frequency table validation from
     drivers to the core (Viresh Kumar).

   - Fix a clock leak regression in the armada-37xx cpufreq driver
     (Gregory Clement).

   - Fix the initialization of the CPU performance data structures for
     shared policies in the CPPC cpufreq driver (Shunyong Yang).

   - Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers a
     bit (Viresh Kumar, Rafael Wysocki).

   - Mark the expected switch fall-throughs in the PM QoS core (Gustavo
     Silva)"

* tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
  tick-sched: avoid a maybe-uninitialized warning
  cpufreq: Drop cpufreq_table_validate_and_show()
  cpufreq: SCMI: Don't validate the frequency table twice
  cpufreq: CPPC: Initialize shared perf capabilities of CPUs
  cpufreq: armada-37xx: Fix clock leak
  cpufreq: CPPC: Don't set transition_latency
  cpufreq: ti-cpufreq: Use builtin_platform_driver()
  cpufreq: intel_pstate: Do not include debugfs.h
  PM / QoS: mark expected switch fall-throughs
  cpuidle: Add definition of residency to sysfs documentation
  time: hrtimer: Use timerqueue_iterate_next() to get to the next timer
  nohz: Avoid duplication of code related to got_idle_tick
  nohz: Gather tick_sched booleans under a common flag field
  cpuidle: menu: Avoid selecting shallow states with stopped tick
  cpuidle: menu: Refine idle state selection for running tick
  sched: idle: Select idle state before stopping the tick
  time: hrtimer: Introduce hrtimer_next_event_without()
  time: tick-sched: Split tick_nohz_stop_sched_tick()
  cpuidle: Return nohz hint from cpuidle_select()
  jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC
  ...

Pull ktest updates from Steven Rostedt:
 "These commits have either been sitting in my INBOX or have been in my
  local tree for some time. I need to push them upstream:

   - Separate out config-bisect.pl from ktest.pl.

     This allows users to do config bisects without full ktest setup.

   - Email on status change.

     Allow the user to be emailed on test start, finish, failure, etc.

   - Other small fixes and enhancements"

* tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (24 commits)
  ktest: Take submenu into account for grub2 menus
  ktest.pl: Add MAIL_COMMAND option to define how to send email
  ktest.pl: Use run_command to execute sending mail
  ktest.pl: Allow dodie be recursive
  ktest.pl: Kill test if mailer is not supported
  ktest.pl: Add MAIL_PATH option to define where to find the mailer
  ktest.pl: No need to print no mailer is specified when mailto is not
  Ktest: add email options to sample.config
  Ktest: Use dodie for critical falures
  Ktest: Add SigInt handling
  Ktest: Add email support
  ktest.pl: Detect if a config-bisect was interrupted
  ktest.pl: Make finding config-bisect.pl dynamic
  ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect
  ktest.pl: Use diffconfig if available for failed config bisects
  ktest.pl: Allow for the config-bisect.pl output to display to console
  ktest: Use config-bisect.pl in ktest.pl
  ktest: Add standalone config-bisect.pl program
  ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build
  ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build
  ...

Pull UBI and UBIFS updates from Richard Weinberger:
 "Minor bug fixes and improvements"

* tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs:
  ubi: Reject MLC NAND
  ubifs: Remove useless parameter of lpt_heap_replace
  ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idx
  ubifs: remove unnecessary assignment
  ubi: Fix error for write access
  ubi: fastmap: Don't flush fastmap work on detach
  ubifs: Check ubifs_wbuf_sync() return code

Pull UML updates from Richard Weinberger:

 - a new and faster epoll based IRQ controller and NIC driver

 - misc fixes and janitorial updates

* git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  Fix vector raw inintialization logic
  Migrate vector timers to new timer API
  um: Compile with modern headers
  um: vector: Fix an error handling path in 'vector_parse()'
  um: vector: Fix a memory allocation check
  um: vector: fix missing unlock on error in vector_net_open()
  um: Add missing EXPORT for free_irq_by_fd()
  High Performance UML Vector Network Driver
  Epoll based IRQ controller
  um: Use POSIX ucontext_t instead of struct ucontext
  um: time: Use timespec64 for persistent clock
  um: Restore symbol versions for __memcpy and memcpy

Pull ARM SoC fixes from Arnd Bergmann:
 "Here is a very small set of fixes for inclusion in linux-4.17-rc1: Two
  changes for the maintainer file, and one more fix for the newly added
  npcm platform, to enable the level 2 cache controller"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Update ASPEED entry with details
  MAINTAINERS: Migrate oxnas list to groups.io
  arm: npcm: enable L2 cache in NPCM7xx architecture

Pull nios2 update from Ley Foon Tan:
 "Use read_persistent_clock64() instead of read_persistent_clock()"

* tag 'nios2-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: Use read_persistent_clock64() instead of read_persistent_clock()

Merge more updates from Andrew Morton:

 - almost all of the rest of MM

 - kasan updates

 - lots of procfs work

 - misc things

 - lib/ updates

 - checkpatch

 - rapidio

 - ipc/shm updates

 - the start of willy's XArray conversion

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (140 commits)
  page cache: use xa_lock
  xarray: add the xa_lock to the radix_tree_root
  fscache: use appropriate radix tree accessors
  export __set_page_dirty
  unicore32: turn flush_dcache_mmap_lock into a no-op
  arm64: turn flush_dcache_mmap_lock into a no-op
  mac80211_hwsim: use DEFINE_IDA
  radix tree: use GFP_ZONEMASK bits of gfp_t for flags
  linux/const.h: refactor _BITUL and _BITULL a bit
  linux/const.h: move UL() macro to include/linux/const.h
  linux/const.h: prefix include guard of uapi/linux/const.h with _UAPI
  xen, mm: allow deferred page initialization for xen pv domains
  elf: enforce MAP_FIXED on overlaying elf segments
  fs, elf: drop MAP_FIXED usage from elf_map
  mm: introduce MAP_FIXED_NOREPLACE
  MAINTAINERS: update bouncing aacraid@adaptec.com addresses
  fs/dcache.c: add cond_resched() in shrink_dentry_list()
  include/linux/kfifo.h: fix comment
  ipc/shm.c: shm_split(): remove unneeded test for NULL shm_file_data.vm_ops
  kernel/sysctl.c: add kdoc comments to do_proc_do{u}intvec_minmax_conv_param
  ...

Remove the address_space ->tree_lock and use the xa_lock newly added to
the radix_tree_root.  Rename the address_space ->page_tree to ->i_pages,
since we don't really care that it's a tree.

[willy@infradead.org: fix nds32, fs/dax.c]
  Link: http://lkml.kernel.org/r/20180406145415.GB20605@bombadil.infradead.orgLink: http://lkml.kernel.org/r/20180313132639.17387-9-willy@infradead.orgSigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This results in no change in structure size on 64-bit machines as it
fits in the padding between the gfp_t and the void *.  32-bit machines
will grow the structure from 8 to 12 bytes.  Almost all radix trees are
protected with (at least) a spinlock, so as they are converted from
radix trees to xarrays, the data structures will shrink again.

Initialising the spinlock requires a name for the benefit of lockdep, so
RADIX_TREE_INIT() now needs to know the name of the radix tree it's
initialising, and so do IDR_INIT() and IDA_INIT().

Also add the xa_lock() and xa_unlock() family of wrappers to make it
easier to use the lock.  If we could rely on -fplan9-extensions in the
compiler, we could avoid all of this syntactic sugar, but that wasn't
added until gcc 4.6.

Link: http://lkml.kernel.org/r/20180313132639.17387-8-willy@infradead.orgSigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't open-code accesses to data structure internals.

Link: http://lkml.kernel.org/r/20180313132639.17387-7-willy@infradead.orgSigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

XFS currently contains a copy-and-paste of __set_page_dirty().  Export
it from buffer.c instead.

Link: http://lkml.kernel.org/r/20180313132639.17387-6-willy@infradead.orgSigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Unicore doesn't walk the VMA tree in its flush_dcache_page()
implementation, so has no need to take the tree_lock.

Link: http://lkml.kernel.org/r/20180313132639.17387-5-willy@infradead.orgSigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARM64 doesn't walk the VMA tree in its flush_dcache_page()
implementation, so has no need to take the tree_lock.

Link: http://lkml.kernel.org/r/20180313132639.17387-4-willy@infradead.orgSigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is preferred to opencoding an IDA_INIT.

Link: http://lkml.kernel.org/r/20180313132639.17387-2-willy@infradead.orgSigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>