- 06 Aug, 2014 24 commits
-
-
Axel Lin authored
commit df86754b upstream. temp2_input should not be writable, fix it. Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Thomas Hellstrom authored
commit 4e578080 upstream. Commit "drm/vmwgfx: correct fb_fix_screeninfo.line_length", while fixing a vmwgfx fbdev bug, also writes the pitch to a supposedly read-only register: SVGA_REG_BYTES_PER_LINE, while it should be (and also in fact is) written to SVGA_REG_PITCHLOCK. This patch is Cc'd stable because of the unknown effects writing to this register might have, particularly on older device versions. v2: Updated log message. Cc: Christopher Friedt <chrisfriedt@gmail.com> Tested-by:
Christopher Friedt <chrisfriedt@gmail.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 43d826ca upstream. We should always prefer to use full RTS protection. Using CTS to self gives a meaningless improvement, but this flow is much harder for the firmware which is likely to have issues with it. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> [bwh: Backported to 3.2: - Adjust filename - Condition for RXON_FLG_SELF_CTS_EN in iwlagn_commit_rxon() was different] Signed-off-by:
-
David Vrabel authored
commit 1b647823 upstream. Calling xen_console_resume() in xen_suspend() causes a warning because it locks irq_mapping_update_lock (a mutex) and this may sleep. If a userspace process is using the evtchn device then this mutex may be locked at the point of the stop_machine() call and xen_console_resume() would then deadlock. Resuming the console after stop_machine() returns avoids this deadlock. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
NeilBrown authored
commit 133d4527 upstream. When we write to a degraded array which has a bitmap, we make sure the relevant bit in the bitmap remains set when the write completes (so a 're-add' can quickly rebuilt a temporarily-missing device). If, immediately after such a write starts, we incorporate a spare, commence recovery, and skip over the region where the write is happening (because the 'needs recovery' flag isn't set yet), then that write will not get to the new device. Once the recovery finishes the new device will be trusted, but will have incorrect data, leading to possible corruption. We cannot set the 'needs recovery' flag when we start the write as we do not know easily if the write will be "degraded" or not. That depends on details of the particular raid level and particular write request. This patch fixes a corruption issue of long standing and so it suitable for any -stable kernel. It applied correctly to 3.0 at least and will minor editing to earlier kernels. Reported-by:
Bill <billstuff2001@sbcglobal.net> Tested-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
HATAYAMA Daisuke authored
commit b292d7a1 upstream. Currently, any NMI is falsely handled by a NMI handler of NMI watchdog if CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR is set. For example, we use external NMI to make system panic to get crash dump, but in this case, the external NMI is falsely handled do to the issue. This commit deals with the issue simply by ignoring CondChgd bit. Here is explanation in detail. On x86 NMI watchdog uses performance monitoring feature to periodically signal NMI each time performance counter gets overflowed. intel_pmu_handle_irq() is called as a NMI_LOCAL handler from a NMI handler of NMI watchdog, perf_event_nmi_handler(). It identifies an owner of a given NMI by looking at overflow status bits in MSR_CORE_PERF_GLOBAL_STATUS MSR. If some of the bits are set, then it handles the given NMI as its own NMI. The problem is that the intel_pmu_handle_irq() doesn't distinguish CondChgd bit from other bits. Unlike the other status bits, CondChgd bit doesn't represent overflow status for performance counters. Thus, CondChgd bit cannot be thought of as a mark indicating a given NMI is NMI watchdog's. As a result, if CondChgd bit is set, any NMI is falsely handled by the NMI handler of NMI watchdog. Also, if type of the falsely handled NMI is either NMI_UNKNOWN, NMI_SERR or NMI_IO_CHECK, the corresponding action is never performed until CondChgd bit is cleared. I noticed this behavior on systems with Ivy Bridge processors: Intel Xeon CPU E5-2630 v2 and Intel Xeon CPU E7-8890 v2. On both systems, CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR has already been set in the beginning at boot. Then the CondChgd bit is immediately cleared by next wrmsr to MSR_CORE_PERF_GLOBAL_CTRL MSR and appears to remain 0. On the other hand, on older processors such as Nehalem, Xeon E7540, CondChgd bit is not set in the beginning at boot. I'm not sure about exact behavior of CondChgd bit, in particular when this bit is set. Although I read Intel System Programmer's Manual to figure out that, the descriptions I found are: In 18.9.1: "The MSR_PERF_GLOBAL_STATUS MSR also provides a ¡sticky bit¢ to indicate changes to the state of performancmonitoring hardware" In Table 35-2 IA-32 Architectural MSRs 63 CondChg: status bits of this register has changed. These are different from the bahviour I see on the actual system as I explained above. At least, I think ignoring CondChgd bit should be enough for NMI watchdog perspective. Signed-off-by:
HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20140625.103503.409316067.d.hatayama@jp.fujitsu.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Alan Stern authored
commit b14bf2d0 upstream. Some buggy JMicron USB-ATA bridges don't know how to translate the FUA bit in READs or WRITEs. This patch adds an entry in unusual_devs.h and a blacklist flag to tell the sd driver not to use FUA. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Michael Büsch <m@bues.ch> Tested-by:
James Bottomley <James.Bottomley@HansenPartnership.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: - Adjust context - Use sd_printk() not sd_first_printk()] Signed-off-by:
-
Michal Nazarewicz authored
commit f35f7124 upstream. It appears that no one ever run ffs-test on a big-endian machine, since it used cpu-endianess for fs_count and hs_count fields which should be in little-endian format. Fix by wrapping the numbers in cpu_to_le32. Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
J. Bruce Fields authored
commit 76f47128 upstream. An NFS operation that creates a new symlink includes the symlink data, which is xdr-encoded as a length followed by the data plus 0 to 3 bytes of zero-padding as required to reach a 4-byte boundary. The vfs, on the other hand, wants null-terminated data. The simple way to handle this would be by copying the data into a newly allocated buffer with space for the final null. The current nfsd_symlink code tries to be more clever by skipping that step in the (likely) case where the byte following the string is already 0. But that assumes that the byte following the string is ours to look at. In fact, it might be the first byte of a page that we can't read, or of some object that another task might modify. Worse, the NFSv4 code tries to fix the problem by actually writing to that byte. In the NFSv2/v3 cases this actually appears to be safe: - nfs3svc_decode_symlinkargs explicitly null-terminates the data (after first checking its length and copying it to a new page). - NFSv2 limits symlinks to 1k. The buffer holding the rpc request is always at least a page, and the link data (and previous fields) have maximum lengths that prevent the request from reaching the end of a page. In the NFSv4 case the CREATE op is potentially just one part of a long compound so can end up on the end of a page if you're unlucky. The minimal fix here is to copy and null-terminate in the NFSv4 case. The nfsd_symlink() interface here seems too fragile, though. It should really either do the copy itself every time or just require a null-terminated string. Reported-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Amitkumar Karwar authored
commit d76744a9 upstream. https://bugzilla.kernel.org/show_bug.cgi?id=70191 https://bugzilla.kernel.org/show_bug.cgi?id=77581 It is observed that sometimes Tx packet is downloaded without adding driver's txpd header. This results in firmware parsing garbage data as packet length. Sometimes firmware is unable to read the packet if length comes out as invalid. This stops further traffic and timeout occurs. The root cause is uninitialized fields in tx_info(skb->cb) of packet used to get garbage values. In this case if MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd header was skipped. This patch makes sure that tx_info is correctly initialized to fix the problem. Reported-by:
Andrew Wiley <wiley.andrew.j@gmail.com> Reported-by:
Linus Gasser <list@markas-al-nour.org> Reported-by:
Michael Hirsch <hirsch@teufel.de> Tested-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Maithili Hinge <maithili@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Gu Zheng authored
commit 391acf97 upstream. When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [<ffffffff8162f523>] dump_stack+0x4d/0x66 [ 9970.065074] [<ffffffff8109995a>] __might_sleep+0xfa/0x130 [ 9970.130743] [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.409282] [<ffffffff811b1385>] __mpol_dup+0xe5/0x150 [ 9970.471897] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.536585] [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [<ffffffff8106a598>] do_fork+0xd8/0x380 [ 9970.894375] [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [<ffffffff8106a8c6>] SyS_clone+0x16/0x20 [ 9971.030011] [<ffffffff81642009>] stub_clone+0x69/0x90 [ 9971.091573] [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Brian King authored
commit 7114aae0 upstream. Add a memory barrier prior to sending a new command to the VIOS to ensure the VIOS does not receive stale data in the command buffer. Also add a memory barrier when processing the CRQ for completed commands. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Acked-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> [bwh: Backported to 3.2: as the iSeries code is still present, these functions have different names and live in rpa_vscsi.c.] Signed-off-by:
-
Brian King authored
commit 9ee75597 upstream. If a CRQ reset is triggered for some reason while in the middle of performing VSCSI adapter initialization, we don't want to call the done function for the initialization MAD commands as this will only result in two threads attempting initialization at the same time, resulting in failures. Signed-off-by:
-
Wang, Yu authored
commit d6236f6d upstream. The system suspend flow as following: 1, Freeze all user processes and kenrel threads. 2, Try to suspend all devices. 2.1, If pci device is in RPM suspended state, then pci driver will try to resume it to RPM active state in the prepare stage. 2.2, xhci_resume function calls usb_hcd_resume_root_hub to queue two workqueue items to resume usb2&usb3 roothub devices. 2.3, Call suspend callbacks of devices. 2.3.1, All suspend callbacks of all hcd's children, including roothub devices are called. 2.3.2, Finally, hcd_pci_suspend callback is called. Due to workqueue threads were already frozen in step 1, the workqueue items can't be scheduled, and the roothub devices can't be resumed in this flow. The HCD_FLAG_WAKEUP_PENDING flag which is set in usb_hcd_resume_root_hub won't be cleared. Finally, hcd_pci_suspend will return -EBUSY, and system suspend fails. The reason why this issue doesn't show up very often is due to that choose_wakeup will be called in step 2.3.1. In step 2.3.1, if udev->do_remote_wakeup is not equal to device_may_wakeup(&udev->dev), then udev will resume to RPM active for changing the wakeup settings. This has been a lucky hit which hides this issue. For some special xHCI controllers which have no USB2 port, then roothub will not match hub driver due to probe failed. Then its do_remote_wakeup will be set to zero, and we won't be as lucky. xhci driver doesn't need to resume roothub devices everytime like in the above case. It's only needed when there are pending event TRBs. This patch should be back-ported to kernels as old as 3.2, that contains the commit f69e3120 "USB: XHCI: resume root hubs when the controller resumes" Signed-off-by:
Wang, Yu <yu.y.wang@intel.com> Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Lu Baolu authored
commit ff8cbf25 upstream. When xHCI PCI host is suspended, if do_wakeup is false in xhci_pci_suspend, xhci_bus_suspend needs to clear all root port wake on bits. Otherwise some Intel platforms may get a spurious wakeup, even if PCI PME# is disabled. This patch should be back-ported to kernels as old as 2.6.37, that contains the commit 9777e3ce "USB: xHCI: bus power management implementation". Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 3213b151 upstream. The transfer burst count (TBC) field in xhci 1.0 hosts should be set to the number of bursts needed to transfer all packets in a isoc TD. Supported values are 0-2 (1 to 3 bursts per service interval). Formula for TBC calculation is given in xhci spec section 4.11.2.3: TBC = roundup( Transfer Descriptor Packet Count / Max Burst Size +1 ) - 1 This patch should be applied to stable kernels since 3.0 that contain the commit 5cd43e33 "xhci 1.0: Set transfer burst count field." Suggested-by:
ShiChun Ma <masc2008@qq.com> Signed-off-by:
-
Bjørn Mork authored
commit b0ebef36 upstream. Adding a couple of Olivetti modems and blacklisting the net function on a couple which are already supported. Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit aea1ae87 upstream. Fix NULL-pointer dereference when probing an interface with no endpoints. These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed. Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for ep_desc after the loop. Fixes: 895f28ba ("USB: ftdi_sio: fix hi-speed device packet size calculation") Reported-by:
Mike Remski <mremski@mutualink.net> Tested-by:
-
Michal Nazarewicz authored
commit f0688c8b upstream. If the descriptors do not need any strings and user space sends empty set of strings, the ffs->stringtabs field remains NULL. Thus *ffs->stringtabs in functionfs_bind leads to a NULL pointer dereferenece. The bug was introduced by commit [fd7c9a00: “use usb_string_ids_n()”]. While at it, remove double initialisation of lang local variable in that function. ffs->strings_count does not need to be checked in any way since in the above scenario it will remain zero and usb_string_ids_n() is a no-operation when colled with 0 argument. Signed-off-by:
-
Paolo Bonzini authored
commit 7cb060a9 upstream. KVM does not really do much with the PAT, so this went unnoticed for a long time. It is exposed however if you try to do rdmsr on the PAT register. Reported-by:
Valentine Sinitsyn <valentine.sinitsyn@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Nadav Amit authored
commit 682367c4 upstream. Recent Intel CPUs have 10 variable range MTRRs. Since operating systems sometime make assumptions on CPUs while they ignore capability MSRs, it is better for KVM to be consistent with recent CPUs. Reporting more MTRRs than actually supported has no functional implications. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
-
David R. Piegdon authored
commit c021f241 upstream. Fix a parser-bug in the omap2 muxing code where muxtable-entries will be wrongly selected if the requested muxname is a *prefix* of their m0-entry and they have a matching mN-entry. Fix by additionally checking that the length of the m0_entry is equal. For example muxing of "dss_data2.dss_data2" on omap32xx will fail because the prefix "dss_data2" will match the mux-entries "dss_data2" as well as "dss_data20", with the suffix "dss_data2" matching m0 (for dss_data2) and m4 (for dss_data20). Thus both are recognized as signal path candidates: Relevant muxentries from mux34xx.c: _OMAP3_MUXENTRY(DSS_DATA20, 90, "dss_data20", NULL, "mcspi3_somi", "dss_data2", "gpio_90", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(DSS_DATA2, 72, "dss_data2", NULL, NULL, NULL, "gpio_72", NULL, NULL, "safe_mode"), This will result in a failure to mux the pin at all: _omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2 Patch should apply to linus' latest master down to rather old linux-2.6 trees. Signed-off-by:
David R. Piegdon <lkml@p23q.org> [tony@atomide.com: updated description to include full description] Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Ben Hutchings authored
This reverts commit caa53449, which was commit fe6cc55f upstream. In 3.2, the transport header length is not calculated in the forwarding path, so skb_gso_network_seglen() returns an incorrect result. We also have problems due to the local_df flag not being set correctly. Signed-off-by:
-
Ben Hutchings authored
This reverts commit 59d9f389, which was commit ca6c5d4a upstream. It is a valid fix, but depends on sk_buff::local_df being set in all the right cases, which it wasn't in 3.2. We need to defer it unless and until the other fixes are also backported to 3.2.y. Signed-off-by:
-
- 11 Jul, 2014 16 commits
-
-
Ben Hutchings authored
-
Michael S. Tsirkin authored
commit 1fd819ec upstream. skb_segment copies frags around, so we need to copy them carefully to avoid accessing user memory after reporting completion to userspace through a callback. skb_segment doesn't normally happen on datapath: TSO needs to be disabled - so disabling zero copy in this case does not look like a big deal. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2. As skb_segment() only supports page-frags *or* a frag list, there is no need for the additional frag_skb pointer or the preparatory renaming.] Signed-off-by:
-
Michael S. Tsirkin authored
commit dcc0fb78 upstream. Export skb_copy_ubufs so that modules can orphan frags. Signed-off-by:
-
Michael S. Tsirkin authored
commit a353e0ce upstream. Many places do if ((skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY)) skb_copy_ubufs(skb, gfp_mask); to copy and invoke frag destructors if necessary. Add an inline helper for this. Signed-off-by:
-
Tejun Heo authored
commit b9cd18de upstream. The 'sysret' fastpath does not correctly restore even all regular registers, much less any segment registers or reflags values. That is very much part of why it's faster than 'iret'. Normally that isn't a problem, because the normal ptrace() interface catches the process using the signal handler infrastructure, which always returns with an iret. However, some paths can get caught using ptrace_event() instead of the signal path, and for those we need to make sure that we aren't going to return to user space using 'sysret'. Otherwise the modifications that may have been done to the register set by the tracer wouldn't necessarily take effect. Fix it by forcing IRET path by setting TIF_NOTIFY_RESUME from arch_ptrace_stop_needed() which is invoked from ptrace_stop(). Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Oleg Nesterov <oleg@redhat.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Geert Uytterhoeven authored
commit 98b0f811 upstream. The English and Korean translations were updated, the Chinese and Japanese weren't. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Liu Hua authored
commit 8fad87bc upstream. When we configure CONFIG_ARM_LPAE=y, pfn << PAGE_SHIFT will overflow if pfn >= 0x100000 in copy_oldmem_page. So use __pfn_to_phys for converting. Signed-off-by:
Liu Hua <sdu.liu@huawei.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
David Woodhouse authored
Part of commit ea8ea460 upstream. This missing IOTLB flush was added as a minor, inconsequential bug-fix in commit ea8ea460 ("iommu/vt-d: Clean up and fix page table clear/free behaviour") in 3.15. It wasn't originally intended for -stable but a couple of users have reported issues which turn out to be fixed by adding the missing flush. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> [bwh: Backported to 3.2: - Adjust context - Use &dmar_domain->iommu_bmp, as it is a single word not an array] Signed-off-by:
-
Ben Collins authored
commit 11f8a7b3 upstream. The assumption that sizeof(long) >= sizeof(resource_size_t) can lead to truncation of the PCI resource address, meaning this driver didn't work on 32-bit systems with 64-bit PCI adressing ranges. Signed-off-by:
Ben Collins <ben.c@servergy.com> Acked-by:
Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
James Bottomley authored
commit d555a2ab upstream. We unconditionally execute scsi_eh_get_sense() to make sure all failed commands that should have sense attached, do. However, the routine forgets that some commands, because of the way they fail, will not have any sense code ... we should not bother them with a REQUEST_SENSE command. Fix this by testing to see if we actually got a CHECK_CONDITION return and skip asking for sense if we don't. Tested-by:
-
Nicholas Bellinger authored
Part of commit 4442dc8a upstream. This patch changes rd_allocate_sgl_table() to explicitly clear ramdisk_mcp backend memory pages by passing __GFP_ZERO into alloc_pages(). This addresses a potential security issue where reading from a ramdisk_mcp could return sensitive information, and follows what >= v3.15 does to explicitly clear ramdisk_mcp memory at backend device initialization time. Reported-by:
Jorge Daniel Sequeira Matias <jdsm@tecnico.ulisboa.pt> Cc: Jorge Daniel Sequeira Matias <jdsm@tecnico.ulisboa.pt> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Wei Yang authored
[ Upstream commit befdf897 ] This patch wrap up a helper function __mlx4_remove_one() which does the tear down function but preserve the drv_data. Functions like mlx4_pci_err_detected() and mlx4_restart_one() will call this one with out releasing drvdata. Signed-off-by:
Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by:
-
Wei Yang authored
[ No upstream commit, this is a cherry picked backport enabler. ] That way we can check flags later on, when we've finished with the pci_device_id structure. This is a backport. Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Xufeng Zhang authored
[ Upstream commit d3217b15 ] Consider the scenario: For a TCP-style socket, while processing the COOKIE_ECHO chunk in sctp_sf_do_5_1D_ce(), after it has passed a series of sanity check, a new association would be created in sctp_unpack_cookie(), but afterwards, some processing maybe failed, and sctp_association_free() will be called to free the previously allocated association, in sctp_association_free(), sk_ack_backlog value is decremented for this socket, since the initial value for sk_ack_backlog is 0, after the decrement, it will be 65535, a wrap-around problem happens, and if we want to establish new associations afterward in the same socket, ABORT would be triggered since sctp deem the accept queue as full. Fix this issue by only decrementing sk_ack_backlog for associations in the endpoint's list. Fix-suggested-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Xufeng Zhang <xufeng.zhang@windriver.com> Acked-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 39c36094 ] I noticed we were sending wrong IPv4 ID in TCP flows when MTU discovery is disabled. Note how GSO/TSO packets do not have monotonically incrementing ID. 06:37:41.575531 IP (id 14227, proto: TCP (6), length: 4396) 06:37:41.575534 IP (id 14272, proto: TCP (6), length: 65212) 06:37:41.575544 IP (id 14312, proto: TCP (6), length: 57972) 06:37:41.575678 IP (id 14317, proto: TCP (6), length: 7292) 06:37:41.575683 IP (id 14361, proto: TCP (6), length: 63764) It appears I introduced this bug in linux-3.1. inet_getid() must return the old value of peer->ip_id_count, not the new one. Lets revert this part, and remove the prevention of a null identification field in IPv6 Fragment Extension Header, which is dubious and not even done properly. Fixes: 87c48fa3 ("ipv6: make fragment identifications less predictable") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Tom Gundersen authored
[ Upstream commit f98f89a0 ] Enable the module alias hookup to allow tunnel modules to be autoloaded on demand. This is in line with how most other netdev kinds work, and will allow userspace to create tunnels without having CAP_SYS_MODULE. Signed-off-by:
Tom Gundersen <teg@jklm.no> Signed-off-by:
-
