- 24 Nov, 2014 40 commits
-
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Rafał Miłecki authored
1) Move private defines to the .c file 2) Move SPROM helper to the sprom.c 3) Drop unused code 4) Rename magic to the NVRAM_MAGIC 5) Add const to the char pointer we never modify Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8289/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Rafał Miłecki authored
NVRAM can be read using magic memory offset, but after all it's just a flash partition. On platforms where NVRAM isn't needed early we can get it using mtd subsystem. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8266/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
The hybrid FPR scheme exists to allow for compatibility between existing FP32 code and newly compiled FP64A code. Such code should hopefully be rare in the real world, and for the moment is difficult to come across. All code except that built for the FP64 ABI can correctly execute using the hybrid FPR scheme, so debugging the hybrid FPR implementation can be eased by forcing all such code to use it. This is undesirable in general due to the trap & emulate overhead of the hybrid FPR implementation, but is a very useful option to have for debugging. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7680/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
This patch reads the .MIPS.abiflags section when it is present, and sets the FP mode of the task accordingly. Any loaded ELF files which do not contain a .MIPS.abiflags section will continue to observe the previous behaviour, that is FR=1 if EF_MIPS_FP64 is set else FR=0. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7681/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
New toolchains will generate a .MIPS.abiflags section, referenced by a new PT_MIPS_ABIFLAGS program header. This section will provide information about the requirements of the ELF, including the ISA level the code is built for, the ASEs it requires, the size of various registers and its expectations of the floating point mode. This patch introduces a definition of the structure of this section and the program header, for use in a subsequent patch. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7682/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Hybrid FPRs is a scheme where scalar FP registers are 64b wide, but accesses to odd indexed single registers use bits 63:32 of the preceeding even indexed 64b register. In this mode all FP code except that built for the plain FP64 ABI can execute correctly. Most notably a combination of FP64A & FP32 code can execute correctly, allowing for existing FP32 binaries to be linked with new FP64A binaries that can make use of 64 bit FP & MSA. Hybrid FPRs are implemented by setting both the FR & FRE bits, trapping & emulating single precision FP instructions (via Reserved Instruction exceptions) whilst allowing others to execute natively. It therefore has a penalty in terms of execution speed, and should only be used when no fully native mode can be. As more binaries are recompiled to use either the FPXX or FP64(A) ABIs, the need for hybrid FPRs should diminish. However in the short to mid term it allows for a gradual transition towards that world, rather than a complete ABI break which is not feasible for some users & not desirable for many. A task will be executed using the hybrid FPR scheme when its TIF_HYBRID_FPREGS flag is set & TIF_32BIT_FPREGS is clear. A further patch will set the flags as necessary, this patch simply adds the infrastructure necessary for the hybrid FPR mode to work. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7683/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
As is done for UFR, ensure that userland cannot directly manipulate the mode by clearing the UFE bit during boot. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7677/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Detect the presence of the Config5 FRE & UFE bits, as indicated by the FREP bit in FPIR. Record this as a CPU option bit, and provide a cpu_has_fre macro to ease checking of that option bit. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7678/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Add definitions for the FRE & UFE bits in Config5, and the FREP bit in FPIR. These bits are used to support a hybrid FPR scheme allowing a mixture of FP32 & FP64 code to execute within a task. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7674/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
MIPS is introducing new variants of its O32 ABI which differ in their handling of floating point, in order to enable a gradual transition towards a world where mips32 binaries can take advantage of new hardware features only available when configured for certain FP modes. In order to do this ELF binaries are being augmented with a new section that indicates, amongst other things, the FP mode requirements of the binary. The presence & location of such a section is indicated by a program header in the PT_LOPROC ... PT_HIPROC range. In order to allow the MIPS architecture code to examine the program header & section in question, pass all program headers in this range to an architecture-specific arch_elf_pt_proc function. This function may return an error if the header is deemed invalid or unsuitable for the system, in which case that error will be returned from load_elf_binary and upwards through the execve syscall. A means is required for the architecture code to make a decision once it is known that all such headers have been seen, but before it is too late to return from an execve syscall. For this purpose the arch_check_elf function is added, and called once, after all PT_LOPROC to PT_HIPROC headers have been passed to arch_elf_pt_proc but before the code which invoked execve has been lost. This enables the architecture code to make a decision based upon all the headers present in an ELF binary and its interpreter, as is required to forbid conflicting FP ABI requirements between an ELF & its interpreter. In order to allow data to be stored throughout the calls to the above functions, struct arch_elf_state is introduced. Finally a variant of the SET_PERSONALITY macro is introduced which accepts a pointer to the struct arch_elf_state, allowing it to act based upon state observed from the architecture specific program headers. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7679/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Load the program headers of an ELF interpreter early enough in load_elf_binary that they can be examined before it's too late to return an error from an exec syscall. This patch does not perform any such checking, it merely lays the groundwork for a further patch to do so. No functional change is intended. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7675/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
load_elf_binary & load_elf_interp both load program headers from an ELF executable in the same way, duplicating the code. This patch introduces a helper function (load_elf_phdrs) which performs this common task & calls it from both load_elf_binary & load_elf_interp. In addition to reducing code duplication, this is part of preparing to load the ELF interpreter headers earlier such that they can be examined before it's too late to return an error from an exec syscall. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7676/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Huacai Chen authored
CPUFreq driver need external timer, so add hpet at first. In Loongson 3, only Core-0 can receive external interrupt. As a result, timekeeping cannot absolutely use HPET timer. We use a hybrid solution: Core-0 use HPET as its clock event device, but other cores still use MIPS; clock source is global and doesn't need interrupt, so use HPET. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8329/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Huacai Chen authored
Loongson-3 has two groups of performance counters, they are 4 sub- registers of CP0's REG25. This patch add oprofile support. REG25, sel 0: Perf Control of group 0; REG25, sel 1: Perf Counter of group 0; REG25, sel 2: Perf Control of group 1; REG25, sel 3: Perf Counter of group 1. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8328/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Huacai Chen authored
Machtypes of Loongson-3 machines become more and more, but there are only small differences among different machtypes. Keeping a large table of machtypes is very ugly and hard to extend. We found that the major machtype differences are UARTs information (number of UARTs, UART IRQs, UART clocks, etc.), platform devices (EC, temperature sensors, fan controllers, etc.) and some workarounds (because of some CPU bugs or mainboard bugs). In this patch we improve the UEFI-like (LEFI) interface to make all Loongson-3 machines use a same machtype "generic-loongson-machine". Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8324/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Huacai Chen authored
By offering Logical->Physical core id mapping, so as to reserve some physical cores via mask. This allow booting from any core when core-0 has problems. Since the maximun cores supported by Loongson-3 is 16, 32-bit cpu_startup_core_id can be split to 16-bit cpu_startup_core_id and 16-bit reserved_cores_mask for compatibility. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8323/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Huacai Chen authored
The width of HT-bus is only 40-bit, but Loongson-3 has 48-bit physical address. This implies only node-0's memory is DMAable because high bits (Node ID) will lost. Fortunately, by configuring address windows in firmware, we can extract 2bit Node ID (bit 44~47, only bit 44~45 used now) from Loongson-3's 48-bit address space and embed it into 40-bit (bit 37~38). Every NUMA node can do DMA now (however, maximum memory of each node is reduced to 2^37 = 128GB). Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8321/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Isamu Mogi authored
Signed-off-by: Isamu Mogi <isamu@leafytree.jp> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8292/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Isamu Mogi authored
Also include asm/mmu_context.h for ASID_MASK. Signed-off-by: Isamu Mogi <isamu@leafytree.jp> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8291/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Rafał Miłecki authored
Initializaion with memory allocator available will be much simpler, this will allow cleanup in the bcma code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8234/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Rafał Miłecki authored
This is some general cleanup as well as preparing sprom.c to become a standalone driver. We will need this for bcm53xx ARM arch support. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8232/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Rafał Miłecki authored
This drops ssb/bcma dependency and will allow us to make it a standalone driver. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/8233/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Rafał Miłecki authored
This makes NVRAM code less bcm47xx/ssb specific allowing it to become a standalone driver in the future. A similar patch for bcma will follow when it's ready. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7612/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Rafał Miłecki authored
We should be using ioremap_nocache helper which handles remaps in a smarter way. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/7611/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
Now that the MIPS GIC irqchip lives in drivers/irqchip/, move its header over to include/linux/irqchip/. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8129/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
Get rid of the ugly GICREAD/GICWRITE/GICBIS macros and use proper iomem accessors instead. Since the GIC registers are not directly accessed outside of the GIC driver any more, make gic_base static and move all the GIC register manipulation macros out of gic.h, converting them to static inline functions. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8127/ Patchwork: https://patchwork.linux-mips.org/patch/8229/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
Stop using the REG macros from gic.h and instead use proper iomem accessors. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8126/ Patchwork: https://patchwork.linux-mips.org/patch/8227/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
Stop using the REG macros from gic.h and instead use proper iomem accessors. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8125/ Patchwork: https://patchwork.linux-mips.org/patch/8228/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
Export the function gic_get_count_width to read the width of the GIC global counter from GIC_SH_CONFIG. Update the GIC clocksource driver to use this new function. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8124/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
Instead of reading the GIC registers directly, use the interface the GIC driver already exposes for reading the global timer. Also get rid of the unnecessary #ifdefs. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8123/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
The generic plat_irq_dispatch provided in irq_cpu.c is sufficient for dispatching interrupts on SEAD-3 in legacy and vectored interrupt modes. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7822/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
The generic plat_irq_dispatch provided in irq_cpu.c is sufficient for dispatching interrupts on Malta in legacy and vectored interrupt modes. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7821/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
Now that all GIC interrupt routing and handling logic is in the GIC driver itself, un-export variables/functions which are no longer used outside the GIC driver. This also allows us to remove gic_compare_int and combine gic_get_int_mask with gic_get_int since these interfaces are no longer used. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7820/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
The MIPS GIC supports 7 local interrupts, 2 of which are the GIC local watchdog and count/compare timer. The remainder are CPU interrupts which may optionally be re-routed through the GIC. GIC hardware IRQs 0-6 are now used for local interrupts while hardware IRQs 7+ are used for external (shared) interrupts. Note that the 5 CPU interrupts may not be re-routable through the GIC. In that case mapping will fail and the vectors reported in C0_IntCtl should be used instead. gic_get_c0_compare_int() and gic_get_c0_perfcount_int() will return the correct IRQ number to use for the C0 timer and perfcounter interrupts based on the routability of those interrupts through the GIC. A separate irq_chip, with callbacks that mask/unmask the local interrupt on all CPUs, is used for the C0 timer and performance counter interrupts since all other platforms do not use the percpu IRQ API for those interrupts. Malta, SEAD-3, and the GIC clockevent driver have been updated to use local interrupts and the R4K clockevent driver has been updated to poll for C0 timer interrupts through the GIC when the GIC is present. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7819/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
GIC edge-triggered interrupts must be acknowledged by clearing the edge detector via a write to GIC_SH_WEDGE. Create a separate edge-triggered irq_chip with the appropriate irq_ack() callback. This also allows us to get rid of gic_irq_flags. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7818/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
Instead of requiring platforms to define the correct GIC_NUM_INTRS, use the value reported in GIC_SH_CONFIG. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7817/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
Now that the GIC properly uses IRQ domains, kill off the per-platform routing tables that were used to make the GIC appear transparent. This includes: - removing the mapping tables and the support for applying them, - moving GIC IPI support to the GIC driver, - properly routing the i8259 through the GIC on Malta, and - updating IRQ assignments on SEAD-3 when the GIC is present. Platforms no longer will pass an interrupt mapping table to gic_init. Instead, they will pass the CPU interrupt vector (2 - 7) that they expect the GIC to route interrupts to. Note that in EIC mode this value is ignored and all GIC interrupts are routed to EIC vector 1. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7816/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Bresticker authored
Use a simple IRQ domain for the MIPS GIC. Remove the gic_platform_init callback as it's no longer necessary for it to set the irqchip. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7811/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-