- 08 Jul, 2020 8 commits
-
-
Andrii Nakryiko authored
perf_buffer__new() is relying on BPF_OBJ_GET_INFO_BY_FD availability for few sanity checks. OBJ_GET_INFO for maps is actually much more recent feature than perf_buffer support itself, so this causes unnecessary problems on old kernels before BPF_OBJ_GET_INFO_BY_FD was added. This patch makes those sanity checks optional and just assumes best if command is not supported. If user specified something incorrectly (e.g., wrong map type), kernel will reject it later anyway, except user won't get a nice explanation as to why it failed. This seems like a good trade off for supporting perf_buffer on old kernels. Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200708015318.3827358-6-andriin@fb.com
-
Andrii Nakryiko authored
Add a test that relies on CO-RE, but doesn't expect any of the recent features, not available on old kernels. This is useful for Travis CI tests running against very old kernels (e.g., libbpf has 4.9 kernel testing now), to verify that CO-RE still works, even if kernel itself doesn't support BTF yet, as long as there is .BTF embedded into vmlinux image by pahole. Given most of CO-RE doesn't require any kernel awareness of BTF, it is a useful test to validate that libbpf's BTF sanitization is working well even with ancient kernels. Signed-off-by:
-
Andrii Nakryiko authored
Change sanitization process to preserve original BTF, which might be used by libbpf itself for Kconfig externs, CO-RE relocs, etc, even if kernel is old and doesn't support BTF. To achieve that, if libbpf detects the need for BTF sanitization, it would clone original BTF, sanitize it in-place, attempt to load it into kernel, and if successful, will preserve loaded BTF FD in original `struct btf`, while freeing sanitized local copy. If kernel doesn't support any BTF, original btf and btf_ext will still be preserved to be used later for CO-RE relocation and other BTF-dependent libbpf features, which don't dependon kernel BTF support. Patch takes care to not specify BTF and BTF.ext features when loading BPF programs and/or maps, if it was detected that kernel doesn't support BTF features. Signed-off-by:
-
Andrii Nakryiko authored
Add setter for BTF FD to allow application more fine-grained control in more advanced scenarios. Storing BTF FD inside `struct btf` provides little benefit and probably would be better done differently (e.g., btf__load() could just return FD on success), but we are stuck with this due to backwards compatibility. The main problem is that it's impossible to load BTF and than free user-space memory, but keep FD intact, because `struct btf` assumes ownership of that FD upon successful load and will attempt to close it during btf__free(). To allow callers (e.g., libbpf itself for BTF sanitization) to have more control over this, add btf__set_fd() to allow to reset FD arbitrarily, if necessary. Signed-off-by:
-
Andrii Nakryiko authored
With valid ELF and valid BTF, there is no reason (apart from bugs) why BTF finalization should fail. So make it strict and return error if it fails. This makes CO-RE relocation more reliable, as they are not going to be just silently skipped, if BTF finalization failed. Signed-off-by:
-
Jesper Dangaard Brouer authored
There are a number of places in test_progs that use minus-1 as the argument to exit(). This is confusing as a process exit status is masked to be a number between 0 and 255 as defined in man exit(3). Thus, users will see status 255 instead of minus-1. This patch use positive exit code 3 instead of minus-1. These cases are put in the same group of infrastructure setup errors. Fixes: fd27b183 ("selftests/bpf: Reset process and thread affinity after each test/sub-test") Fixes: 811d7e37 ("bpf: selftests: Restore netns after each test") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
This is a follow up adjustment to commit 6c92bd5c ("selftests/bpf: Test_progs indicate to shell on non-actions"), that returns shell exit indication EXIT_FAILURE (value 1) when user selects a non-existing test. The problem with using EXIT_FAILURE is that a shell script cannot tell the difference between a non-existing test and the test failing. This patch uses value 2 as shell exit indication. (Aside note unrecognized option parameters use value 64). Fixes: 6c92bd5c ("selftests/bpf: Test_progs indicate to shell on non-actions") Signed-off-by:
-
Louis Peens authored
emit_obj_refs_json needs to added the same as with emit_obj_refs_plain to prevent segfaults, similar to Commit "8ae4121b bpf: Fix bpftool without skeleton code enabled"). See the error below: # ./bpftool -p prog { "error": "bpftool built without PID iterator support" },[{ "id": 2, "type": "cgroup_skb", "tag": "7be49e3934a125ba", "gpl_compatible": true, "loaded_at": 1594052789, "uid": 0, "bytes_xlated": 296, "jited": true, "bytes_jited": 203, "bytes_memlock": 4096, "map_ids": [2,3 Segmentation fault (core dumped) The same happens for ./bpftool -p map, as well as ./bpftool -j prog/map. Fixes: d53dee3f ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs") Signed-off-by:
Louis Peens <louis.peens@netronome.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200708110827.7673-1-louis.peens@netronome.com
-
- 07 Jul, 2020 23 commits
-
-
Daniel T. Lee authored
samples/bpf no longer use bpf_map_def_legacy and instead use the libbpf's bpf_map_def or new BTF-defined MAP format. This commit removes unused bpf_map_def_legacy struct from selftests/bpf/bpf_legacy.h. Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by:
-
Daniel T. Lee authored
Previously, in order to set the numa_node attribute at the time of map creation using "libbpf", it was necessary to call bpf_create_map_node() directly (bpf_load approach), instead of calling bpf_object_load() that handles everything on its own, including map creation. And because of this problem, this sample had problems with refactoring from bpf_load to libbbpf. However, by commit 1bdb6c9a ("libbpf: Add a bunch of attribute getters/setters for map definitions") added the numa_node attribute and allowed it to be set in the map. By using libbpf instead of bpf_load, the inner map definition has been explicitly declared with BTF-defined format. Also, the element of ARRAY_OF_MAPS was also statically specified using the BTF format. And for this reason some logic in fixup_map() was not needed and changed or removed. Signed-off-by:
-
Daniel T. Lee authored
From commit 646f02ff ("libbpf: Add BTF-defined map-in-map support"), a way to define internal map in BTF-defined map has been added. Instead of using previous 'inner_map_idx' definition, the structure to be used for the inner map can be directly defined using array directive. __array(values, struct inner_map) This commit refactors map in map test program with libbpf by explicitly defining inner map with BTF-defined format. Signed-off-by:
-
Daniel T. Lee authored
Currently, BPF programs with kprobe/sys_connect does not work properly. Commit 34745aed ("samples/bpf: fix kprobe attachment issue on x64") This commit modifies the bpf_load behavior of kprobe events in the x64 architecture. If the current kprobe event target starts with "sys_*", add the prefix "__x64_" to the front of the event. Appending "__x64_" prefix with kprobe/sys_* event was appropriate as a solution to most of the problems caused by the commit below. commit d5a00528 ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()") However, there is a problem with the sys_connect kprobe event that does not work properly. For __sys_connect event, parameters can be fetched normally, but for __x64_sys_connect, parameters cannot be fetched. ffffffff818d3520 <__x64_sys_connect>: ffffffff818d3520: e8 fb df 32 00 callq 0xffffffff81c01520 <__fentry__> ffffffff818d3525: 48 8b 57 60 movq 96(%rdi), %rdx ffffffff818d3529: 48 8b 77 68 movq 104(%rdi), %rsi ffffffff818d352d: 48 8b 7f 70 movq 112(%rdi), %rdi ffffffff818d3531: e8 1a ff ff ff callq 0xffffffff818d3450 <__sys_connect> ffffffff818d3536: 48 98 cltq ffffffff818d3538: c3 retq ffffffff818d3539: 0f 1f 80 00 00 00 00 nopl (%rax) As the assembly code for __x64_sys_connect shows, parameters should be fetched and set into rdi, rsi, rdx registers prior to calling __sys_connect. Because of this problem, this commit fixes the sys_connect event by first getting the value of the rdi register and then the value of the rdi, rsi, and rdx register through an offset based on that value. Fixes: 34745aed ("samples/bpf: fix kprobe attachment issue on x64") Signed-off-by:
-
Stanislav Fomichev authored
Simple test that enforces a single SOCK_DGRAM socket per cgroup. Signed-off-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
Stanislav Fomichev authored
Support attaching to BPF_CGROUP_INET_SOCK_RELEASE and properly display attach type upon prog dump. Signed-off-by:
-
Stanislav Fomichev authored
Add auto-detection for the cgroup/sock_release programs. Signed-off-by:
-
Stanislav Fomichev authored
Sometimes it's handy to know when the socket gets freed. In particular, we'd like to try to use a smarter allocation of ports for bpf_bind and explore the possibility of limiting the number of SOCK_DGRAM sockets the process can have. Implement BPF_CGROUP_INET_SOCK_RELEASE hook that triggers on inet socket release. It triggers only for userspace sockets (not in-kernel ones) and therefore has the same semantics as the existing BPF_CGROUP_INET_SOCK_CREATE. Signed-off-by:
-
Matteo Croce authored
priv->page_pool is an array, so comparing against it will always return true. Do a meaningful check by checking priv->page_pool[0] instead. While at it, clear the page_pool pointers on deallocation, or when an allocation error happens during init. Reported-by:
Colin Ian King <colin.king@canonical.com> Fixes: c2d6fe61 ("mvpp2: XDP TX support") Signed-off-by:
Matteo Croce <mcroce@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
We can re-use the existing work queue to handle path management instead of a dedicated work queue. Just move pm_worker to protocol.c, call it from the mptcp worker and get rid of the msk lock (already held). Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Wei Yongjun authored
In certain configurations without power management support, gcc report the following warning: drivers/net/ethernet/sun/cassini.c:5206:12: warning: 'cas_resume' defined but not used [-Wunused-function] 5206 | static int cas_resume(struct device *dev_d) | ^~~~~~~~~~ Mark cas_resume() as __maybe_unused to make it clear. Fixes: f193f4eb ("sun/cassini: use generic power management") Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Vaibhav Gupta authored
The upgraded .suspend() and .resume() throw "defined but not used [-Wunused-function]" warning for certain configurations. Mark them with "__maybe_unused" attribute. Compile-tested only. Fixes: b0db0cc2 ("sun/niu: use generic power management") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== drivers/net/phy C=1 W=1 fixes This fixes most of the Sparse and W=1 warnings in drivers/net/phy. The Cavium code is still not fully clean, but it might actually be the strange code is confusing Sparse. v2 -- Added RB, TB, AB. s/case/cause Reverse Christmas tree Module soft dependencies ==================== Signed-off-by: -
Andrew Lunn authored
To ensure that the octeon MDIO driver has been loaded, the Cavium ethernet drivers reference a dummy symbol in the MDIO driver. This forces it to be loaded first. And this symbol has not been cleanly implemented, resulting in warnings when build W=1 C=1. Since device tree is being used, and a phandle points to the PHY on the MDIO bus, we can make use of deferred probing. If the PHY fails to connect, it should be because the MDIO bus driver has not loaded yet. Return -EPROBE_DEFER so it will be tried again later. Additionally, add a MODULE_SOFTDEP() to give user space a hint as to what order it should load the modules. v2: s/octoen/octeon/ Add MODULE_SOFTDEP() Cc: Sunil Goutham <sgoutham@marvell.com> Cc: Robert Richter <rrichter@marvell.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
The MIPS low level register access functions seem to be missing __iomem annotation. This causes lots of sparse warnings, when code casts off the __iomem. Make the Cavium MDIO drivers cleaner by pushing the casts lower down into the helpers, allow the drivers to work as normal, with __iomem. bus->register_base is now an void *, rather than a u64. So forming the mii_bus->id string cannot use %llx any more. Use %px, so this kernel address is still exposed to user space, as it was before. v2: s/cases/causes/g Cc: Sunil Goutham <sgoutham@marvell.com> Cc: Robert Richter <rrichter@marvell.com> Reviewed-by:
-
Andrew Lunn authored
ntohs() expects to be passed a __be16. Correct the type of the variable holding the sequence ID. Cc: Richard Cochran <richardcochran@gmail.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Reviewed-by:
-
Andrew Lunn authored
This array is not used outside of phy_device.c, so make it static. Reviewed-by:
-
Andrew Lunn authored
Avoid the W=1 warning that symbol 'genphy_c45_driver' was not declared. Should it be static? Declare it on the phy header file. Reviewed-by:
-
Andrew Lunn authored
Correct the kerneldoc for a few structure and function calls, as reported by C=1 W=1. Cc: Alexandru Ardelean <alexaundru.ardelean@analog.com> Reviewed-by:
-
Andrew Lunn authored
By placing the GENMASK value into an unsigned int and then passing it to PREF_FIELD, the type is reduces down from ULL. Given the reduced size of the type, the range checks in PREP_FAIL() are always true, and -Wtype-limits then gives a warning. By skipping the intermediate variable, the warning can be avoided. Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Chris Healy authored
Dynamically generate a unique GPIO interrupt name, based on the device name and the GPIO name. For example: 103: 0 sx1503q 12 Edge sff2-los 104: 0 sx1503q 13 Edge sff2-tx-fault The sffX indicates the SFP the los and tx-fault are associated with. v3: - reverse Christmas tree new variable - fix spaces vs tabs v2: - added net-next to PATCH part of subject line - switched to devm_kasprintf() Signed-off-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Jacob Keller authored
The recent change by commit 8d7aab35 ("ice: implement snapshot for device capabilities") to implement the device-caps region for the ice driver forgot to document it. Add documentation to the ice devlink documentation file describing the new region and add some sample output to the shell commands provided as an example. Fixes: 8d7aab35 ("ice: implement snapshot for device capabilities") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Florian Fainelli authored
SYSTEMPORT is capable of performing VLAN transmit acceleration, support that by configuring it appropriately, providing the VLAN ID and PCP/DEI where necessary. Signed-off-by:
-
- 06 Jul, 2020 9 commits
-
-
Davide Caratti authored
syzkaller was able to make the kernel reach subflow_data_ready() for a server subflow that was closed before subflow_finish_connect() completed. In these cases we can avoid using the path for regular/fallback MPTCP data, and just wake the main socket, to avoid the following warning: WARNING: CPU: 0 PID: 9370 at net/mptcp/subflow.c:885 subflow_data_ready+0x1e6/0x290 net/mptcp/subflow.c:885 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9370 Comm: syz-executor.0 Not tainted 5.7.0 #106 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xb7/0xfe lib/dump_stack.c:118 panic+0x29e/0x692 kernel/panic.c:221 __warn.cold+0x2f/0x3d kernel/panic.c:582 report_bug+0x28b/0x2f0 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:105 [inline] fixup_bug arch/x86/kernel/traps.c:100 [inline] do_error_trap+0x10f/0x180 arch/x86/kernel/traps.c:197 do_invalid_op+0x32/0x40 arch/x86/kernel/traps.c:216 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:subflow_data_ready+0x1e6/0x290 net/mptcp/subflow.c:885 Code: 04 02 84 c0 74 06 0f 8e 91 00 00 00 41 0f b6 5e 48 31 ff 83 e3 18 89 de e8 37 ec 3d fe 84 db 0f 85 65 ff ff ff e8 fa ea 3d fe <0f> 0b e9 59 ff ff ff e8 ee ea 3d fe 48 89 ee 4c 89 ef e8 f3 77 ff RSP: 0018:ffff88811b2099b0 EFLAGS: 00010206 RAX: ffff888111197000 RBX: 0000000000000000 RCX: ffffffff82fbc609 RDX: 0000000000000100 RSI: ffffffff82fbc616 RDI: 0000000000000001 RBP: ffff8881111bc800 R08: ffff888111197000 R09: ffffed10222a82af R10: ffff888111541577 R11: ffffed10222a82ae R12: 1ffff11023641336 R13: ffff888111541000 R14: ffff88810fd4ca00 R15: ffff888111541570 tcp_child_process+0x754/0x920 net/ipv4/tcp_minisocks.c:841 tcp_v4_do_rcv+0x749/0x8b0 net/ipv4/tcp_ipv4.c:1642 tcp_v4_rcv+0x2666/0x2e60 net/ipv4/tcp_ipv4.c:1999 ip_protocol_deliver_rcu+0x29/0x1f0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:421 [inline] ip_local_deliver+0x2da/0x390 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:441 [inline] ip_rcv_finish net/ipv4/ip_input.c:428 [inline] ip_rcv_finish net/ipv4/ip_input.c:414 [inline] NF_HOOK include/linux/netfilter.h:421 [inline] ip_rcv+0xef/0x140 net/ipv4/ip_input.c:539 __netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5268 __netif_receive_skb+0x27/0x1c0 net/core/dev.c:5382 process_backlog+0x1e5/0x6d0 net/core/dev.c:6226 napi_poll net/core/dev.c:6671 [inline] net_rx_action+0x3e3/0xd70 net/core/dev.c:6739 __do_softirq+0x18c/0x634 kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 </IRQ> do_softirq.part.0+0x26/0x30 kernel/softirq.c:337 do_softirq arch/x86/include/asm/preempt.h:26 [inline] __local_bh_enable_ip+0x46/0x50 kernel/softirq.c:189 local_bh_enable include/linux/bottom_half.h:32 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:723 [inline] ip_finish_output2+0x78a/0x19c0 net/ipv4/ip_output.c:229 __ip_finish_output+0x471/0x720 net/ipv4/ip_output.c:306 dst_output include/net/dst.h:435 [inline] ip_local_out+0x181/0x1e0 net/ipv4/ip_output.c:125 __ip_queue_xmit+0x7a1/0x14e0 net/ipv4/ip_output.c:530 __tcp_transmit_skb+0x19dc/0x35e0 net/ipv4/tcp_output.c:1238 __tcp_send_ack.part.0+0x3c2/0x5b0 net/ipv4/tcp_output.c:3785 __tcp_send_ack net/ipv4/tcp_output.c:3791 [inline] tcp_send_ack+0x7d/0xa0 net/ipv4/tcp_output.c:3791 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6040 [inline] tcp_rcv_state_process+0x36a4/0x49c2 net/ipv4/tcp_input.c:6209 tcp_v4_do_rcv+0x343/0x8b0 net/ipv4/tcp_ipv4.c:1651 sk_backlog_rcv include/net/sock.h:996 [inline] __release_sock+0x1ad/0x310 net/core/sock.c:2548 release_sock+0x54/0x1a0 net/core/sock.c:3064 inet_wait_for_connect net/ipv4/af_inet.c:594 [inline] __inet_stream_connect+0x57e/0xd50 net/ipv4/af_inet.c:686 inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:725 mptcp_stream_connect+0x171/0x5f0 net/mptcp/protocol.c:1920 __sys_connect_file net/socket.c:1854 [inline] __sys_connect+0x267/0x2f0 net/socket.c:1871 __do_sys_connect net/socket.c:1882 [inline] __se_sys_connect net/socket.c:1879 [inline] __x64_sys_connect+0x6f/0xb0 net/socket.c:1879 do_syscall_64+0xb7/0x3d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fb577d06469 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 RSP: 002b:00007fb5783d5dd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 000000000068bfa0 RCX: 00007fb577d06469 RDX: 000000000000004d RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000041427c R14: 00007fb5783d65c0 R15: 0000000000000003 Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/39Reported-by:
Christoph Paasch <cpaasch@apple.com> Fixes: e1ff9e82 ("net: mptcp: improve fallback to TCP") Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
David S. Miller authored
Alexander Lobakin says: ==================== net: qed/qede: W=1 C=1 warnings cleanup This set cleans qed/qede build log under W=1 C=1 with GCC 8 and sparse 0.6.2. The only thing left is "context imbalance -- unexpected unlock" in one of the source files, which will be issued later during the refactoring cycles. The biggest part is handling the endianness warnings. The current code often just assumes that both host and device operate in LE, which is obviously incorrect (despite the fact that it's true for x86 platforms), and makes sparse {s,m}ad. The rest of the series is mostly random non-functional fixes here-and-there. ==================== Signed-off-by: -
Alexander Lobakin authored
Flow Dissector's keys are mostly Network / Big Endian. U{16,32}_MAX are the same in either of byteorders, but let's make sparse happy with wrapping them into noops. Signed-off-by:Alexander Lobakin <alobakin@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Alexander Lobakin authored
One of the function arguments was renamed some time ago, but this wasn't reflected in its kernel-doc comment. Also add the description for return values. Signed-off-by:
-
Alexander Lobakin authored
Current code assumes that both host and device operates in Little Endian in lots of places. While this is true for x86 platform, this doesn't mean we should not care about this. This commit addresses all parts of the code that were pointed out by sparse checker. All operations with restricted (__be*/__le*) types are now protected with explicit from/to CPU conversions, even if they're noops on common setups. I'm sure there are more such places, but this implies a deeper code investigation, and is a subject for future works. Signed-off-by:
-
Alexander Lobakin authored
Use intermediate pointers instead of multiple dereferencing to simplify and beautify parts of code that will be addressed in the next commit. Signed-off-by:
-
Alexander Lobakin authored
To not mix functional and stylistic changes, correct indentation of code that will be modified in the subsequent commits. Signed-off-by:
-
Alexander Lobakin authored
Get rid of the kernel-doc warnings when building with W=1+ by rewriting the problematic doc comments according to the recommended format and style. Note that this only fixes problems found in C source files, headers aren't in scope for now. Signed-off-by:
-
