Make the idle balancer more agressive, to improve a
x264 encoding workload provided by Jason Garrett-Glaser:

 NEXT_BUDDY NO_LB_BIAS
 encoded 600 frames, 252.82 fps, 22096.60 kb/s
 encoded 600 frames, 250.69 fps, 22096.60 kb/s
 encoded 600 frames, 245.76 fps, 22096.60 kb/s

 NO_NEXT_BUDDY LB_BIAS
 encoded 600 frames, 344.44 fps, 22096.60 kb/s
 encoded 600 frames, 346.66 fps, 22096.60 kb/s
 encoded 600 frames, 352.59 fps, 22096.60 kb/s

 NO_NEXT_BUDDY NO_LB_BIAS
 encoded 600 frames, 425.75 fps, 22096.60 kb/s
 encoded 600 frames, 425.45 fps, 22096.60 kb/s
 encoded 600 frames, 422.49 fps, 22096.60 kb/s

Peter pointed out that this is better done via newidle_idx,
not via LB_BIAS, newidle balancing should look for where
there is load _now_, not where there was load 2 ticks ago.

Worst-case latencies are improved as well as no buddies
means less vruntime spread. (as per prior lkml discussions)

This change improves kbuild-peak parallelism as well.
Reported-by: Jason Garrett-Glaser <darkshikari@gmail.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1253011667.9128.16.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

CPU level should have WAKE_AFFINE, whereas ALLNODES is dubious.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

When merging select_task_rq_fair() and sched_balance_self() we lost
the use of wake_idx, restore that and set them to 0 to make wake
balancing more aggressive.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

While merging select_task_rq_fair() and sched_balance_self() I made
a mistake that leads to testing the wrong task affinty.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

for_each_domain() uses RCU to serialize the sched_domains, except
it doesn't actually use rcu_read_lock() and instead relies on
disabling preemption -> FAIL.

XXX: audit other sched_domain code.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

One of the problems of power-saving balancing is that under certain
scenarios it is too slow and allows tons of real work to pile up.

Avoid this by ignoring the powersave stuff when there's real work
to be done.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The problem with wake_idle() is that is doesn't respect things like
cpu_power, which means it doesn't deal well with SMT nor the recent
RT interaction.

To cure this, it needs to do what sched_balance_self() does, which
leads to the possibility of merging select_task_rq_fair() and
sched_balance_self().

Modify sched_balance_self() to:

  - update_shares() when walking up the domain tree,
    (it only called it for the top domain, but it should
     have done this anyway), which allows us to remove
    this ugly bit from try_to_wake_up().

  - do wake_affine() on the smallest domain that contains
    both this (the waking) and the prev (the wakee) cpu for
    WAKE invocations.

Then use the top-down balance steps it had to replace wake_idle().

This leads to the dissapearance of SD_WAKE_BALANCE and
SD_WAKE_IDLE_FAR, with SD_WAKE_IDLE replaced with SD_BALANCE_WAKE.

SD_WAKE_AFFINE needs SD_BALANCE_WAKE to be effective.

Touch all topology bits to replace the old with new SD flags --
platforms might need re-tuning, enabling SD_BALANCE_WAKE
conditionally on a NUMA distance seems like a good additional
feature, magny-core and small nehalem systems would want this
enabled, systems with slow interconnects would not.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

We're going to want to drop rq->lock in try_to_wake_up() for a
longer period of time, however we also want to deal with concurrent
waking of the same task, which is currently handled by holding
rq->lock.

So introduce a new TASK state, namely TASK_WAKING, which indicates
someone is already waking the task (other wakers will fail p->state
& state).

We also keep preemption disabled over the whole ttwu().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Rather ugly patch to fully place the sched_balance_self() code
inside the fair class.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Move the sched_balance_self() code into sched_fair.c

This facilitates the merger of sched_balance_self() and
sched_fair::select_task_rq().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In preparation to other code movement, move weighted_cpuload(),
source_load() and target_load() before the class includes.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add text...
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add a NEXT_BUDDY feature flag to aid in debugging.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

It consists of two conditions, split them out in separate toggles
so we can test them independently.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, e820: Guard against array overflowed in __e820_add_region()
  x86, setup: remove obsolete pre-Kconfig CONFIG_VIDEO_ variables

Merge branch 'x86-percpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-percpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, percpu: Collect hot percpu variables into one cacheline
  x86, percpu: Fix DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED()
  x86, percpu: Add 'percpu_read_stable()' interface for cacheable accesses

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, highmem_32.c: Clean up comment
  x86, pgtable.h: Clean up types
  x86: Clean up dump_pagetable()

Merge branch 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Simplify the Makefile in a minor way through use of cc-ifversion

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64: move clts into batch cpu state updates when preloading fpu
  x86-64: move unlazy_fpu() into lazy cpu state part of context switch
  x86-32: make sure clts is batched during context switch
  x86: split out core __math_state_restore

Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Decrease the level of some NUMA messages to KERN_DEBUG

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (22 commits)
  x86: Fix code patching for paravirt-alternatives on 486
  x86, msr: change msr-reg.o to obj-y, and export its symbols
  x86: Use hard_smp_processor_id() to get apic id for AMD K8 cpus
  x86, sched: Workaround broken sched domain creation for AMD Magny-Cours
  x86, mcheck: Use correct cpumask for shared bank4
  x86, cacheinfo: Fixup L3 cache information for AMD multi-node processors
  x86: Fix CPU llc_shared_map information for AMD Magny-Cours
  x86, msr: Fix msr-reg.S compilation with gas 2.16.1, on 32-bit too
  x86: Move kernel_fpu_using to irq_fpu_usable in asm/i387.h
  x86, msr: fix msr-reg.S compilation with gas 2.16.1
  x86, msr: Export the register-setting MSR functions via /dev/*/msr
  x86, msr: Create _on_cpu helpers for {rw,wr}msr_safe_regs()
  x86, msr: Have the _safe MSR functions return -EIO, not -EFAULT
  x86, msr: CFI annotations, cleanups for msr-reg.S
  x86, asm: Make _ASM_EXTABLE() usable from assembly code
  x86, asm: Add 32-bit versions of the combined CFI macros
  x86, AMD: Disable wrongly set X86_FEATURE_LAHF_LM CPUID bit
  x86, msr: Rewrite AMD rd/wrmsr variants
  x86, msr: Add rd/wrmsr interfaces with preset registers
  x86: add specific support for Intel Atom architecture
  ...

Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Make memtype_seq_ops const
  x86: uv: Clean up uv_ptc_init(), use proc_create()
  x86: Use printk_once()
  x86/cpu: Clean up various files a bit
  x86: Remove duplicated #include
  x86, ipi: Clean up safe_smp_processor_id() by using the cpu_has_apic() macro helper
  x86: Clean up idt_descr and idt_tableby using NR_VECTORS instead of hardcoded number
  x86: Further clean up of mtrr/generic.c
  x86: Clean up mtrr/main.c
  x86: Clean up mtrr/state.c
  x86: Clean up mtrr/mtrr.h
  x86: Clean up mtrr/if.c
  x86: Clean up mtrr/generic.c
  x86: Clean up mtrr/cyrix.c
  x86: Clean up mtrr/cleanup.c
  x86: Clean up mtrr/centaur.c
  x86: Clean up mtrr/amd.c:
  x86: ds.c fix invalid assignment

Merge branch 'x86-asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: remove all now-duplicate header files
  x86: convert termios.h to the asm-generic version
  x86: convert almost generic headers to asm-generic version
  x86: convert trivial headers to asm-generic version
  x86: add copies of some headers to convert to asm-generic

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/i386: Put aligned stack-canary in percpu shared_aligned section
  x86/i386: Make sure stack-protector segment base is cache aligned
  x86: Detect stack protector for i386 builds on x86_64
  x86: allow "=rm" in native_save_fl()
  x86: properly annotate alternatives.c
  x86: Introduce GDT_ENTRY_INIT(), initialize bad_bios_desc statically
  x86, 32-bit: Use generic sys_pipe()
  x86: Introduce GDT_ENTRY_INIT(), fix APM
  x86: Introduce GDT_ENTRY_INIT()
  x86: Introduce set_desc_base() and set_desc_limit()
  x86: Remove unused patch_espfix_desc()
  x86: Use get_desc_base()

Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
  ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=n
  x86, apic: Slim down stack usage in early_init_lapic_mapping()
  x86, ioapic: Get rid of needless check and simplify ioapic_setup_resources()
  x86, ioapic: Define IO_APIC_DEFAULT_PHYS_BASE constant
  x86: Fix x86_model test in es7000_apic_is_cluster()
  x86, apic: Move dmar_table_init() out of enable_IR()
  x86, ioapic: Panic on irq-pin binding only if needed
  x86/apic: Enable x2APIC without interrupt remapping under KVM
  x86, apic: Drop redundant bit assignment
  x86, ioapic: Throw BUG instead of NULL dereference
  x86, ioapic: Introduce for_each_irq_pin() helper
  x86: Remove superfluous NULL pointer check in destroy_irq()
  x86/ioapic.c: unify ioapic_retrigger_irq()
  x86/ioapic.c: convert __target_IO_APIC_irq to conventional for() loop
  x86/ioapic.c: clean up replace_pin_at_irq_node logic and comments
  x86/ioapic.c: convert replace_pin_at_irq_node to conventional for() loop
  x86/ioapic.c: simplify add_pin_to_irq_node()
  x86/ioapic.c: convert io_apic_level_ack_pending loop to normal for() loop
  x86/ioapic.c: move lost comment to what seems like appropriate place
  x86/ioapic.c: remove redundant declaration of irq_pin_list
  ...

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (87 commits)
  NFSv4: Disallow 'mount -t nfs4 -overs=2' and 'mount -t nfs4 -overs=3'
  NFS: Allow the "nfs" file system type to support NFSv4
  NFS: Move details of nfs4_get_sb() to a helper
  NFS: Refactor NFSv4 text-based mount option validation
  NFS: Mount option parser should detect missing "port="
  NFS: out of date comment regarding O_EXCL above nfs3_proc_create()
  NFS: Handle a zero-length auth flavor list
  SUNRPC: Ensure that sunrpc gets initialised before nfs, lockd, etc...
  nfs: fix compile error in rpc_pipefs.h
  nfs: Remove reference to generic_osync_inode from a comment
  SUNRPC: cache must take a reference to the cache detail's module on open()
  NFS: Use the DNS resolver in the mount code.
  NFS: Add a dns resolver for use with NFSv4 referrals and migration
  SUNRPC: Fix a typo in cache_pipefs_files
  nfs: nfs4xdr: optimize low level decoding
  nfs: nfs4xdr: get rid of READ_BUF
  nfs: nfs4xdr: simplify decode_exchange_id by reusing decode_opaque_inline
  nfs: nfs4xdr: get rid of COPYMEM
  nfs: nfs4xdr: introduce decode_sessionid helper
  nfs: nfs4xdr: introduce decode_verifier helper
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (25 commits)
  pata_rz1000: use printk_once
  ahci: kill @force_restart and refine CLO for ahci_kick_engine()
  pata_cs5535: add pci id for AMD based CS5535 controllers
  ahci: Add AMD SB900 SATA/IDE controller device IDs
  drivers/ata: use resource_size
  sata_fsl: Defer non-ncq commands when ncq commands active
  libata: add SATA PMP revision information for spec 1.2
  libata: fix off-by-one error in ata_tf_read_block()
  ahci: Gigabyte GA-MA69VM-S2 can't do 64bit DMA
  ahci: make ahci_asus_m2a_vm_32bit_only() quirk more generic
  dmi: extend dmi_get_year() to dmi_get_date()
  dmi: fix date handling in dmi_get_year()
  libata: unbreak TPM filtering by reorganizing ata_scsi_pass_thru()
  sata_sis: convert to slave_link
  sata_sil24: always set protocol override for non-ATAPI data commands
  libata: Export AHCI capabilities
  libata: Delegate nonrot flag setting to SCSI
  [libata] Add pata_rdc driver for RDC ATA devices
  drivers/ata: Remove unnecessary semicolons
  libata: remove spindown skipping and warning
  ...

Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits)
  ring-buffer: only enable ring_buffer_swap_cpu when needed
  ring-buffer: check for swapped buffers in start of committing
  tracing: report error in trace if we fail to swap latency buffer
  tracing: add trace_array_printk for internal tracers to use
  tracing: pass around ring buffer instead of tracer
  tracing: make tracing_reset safe for external use
  tracing: use timestamp to determine start of latency traces
  tracing: Remove mentioning of legacy latency_trace file from documentation
  tracing/filters: Defer pred allocation, fix memory leak
  tracing: remove users of tracing_reset
  tracing: disable buffers and synchronize_sched before resetting
  tracing: disable update max tracer while reading trace
  tracing: print out start and stop in latency traces
  ring-buffer: disable all cpu buffers when one finds a problem
  ring-buffer: do not count discarded events
  ring-buffer: remove ring_buffer_event_discard
  ring-buffer: fix ring_buffer_read crossing pages
  ring-buffer: remove unnecessary cpu_relax
  ring-buffer: do not swap buffers during a commit
  ring-buffer: do not reset while in a commit
  ...

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (64 commits)
  sched: Fix sched::sched_stat_wait tracepoint field
  sched: Disable NEW_FAIR_SLEEPERS for now
  sched: Keep kthreads at default priority
  sched: Re-tune the scheduler latency defaults to decrease worst-case latencies
  sched: Turn off child_runs_first
  sched: Ensure that a child can't gain time over it's parent after fork()
  sched: enable SD_WAKE_IDLE
  sched: Deal with low-load in wake_affine()
  sched: Remove short cut from select_task_rq_fair()
  sched: Turn on SD_BALANCE_NEWIDLE
  sched: Clean up topology.h
  sched: Fix dynamic power-balancing crash
  sched: Remove reciprocal for cpu_power
  sched: Try to deal with low capacity, fix update_sd_power_savings_stats()
  sched: Try to deal with low capacity
  sched: Scale down cpu_power due to RT tasks
  sched: Implement dynamic cpu_power
  sched: Add smt_gain
  sched: Update the cpu_power sum during load-balance
  sched: Add SD_PREFER_SIBLING
  ...

Merge branch 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
  perf tools: Avoid unnecessary work in directory lookups
  perf stat: Clean up statistics calculations a bit more
  perf stat: More advanced variance computation
  perf stat: Use stddev_mean in stead of stddev
  perf stat: Remove the limit on repeat
  perf stat: Change noise calculation to use stddev
  x86, perf_counter, bts: Do not allow kernel BTS tracing for now
  x86, perf_counter, bts: Correct pointer-to-u64 casts
  x86, perf_counter, bts: Fail if BTS is not available
  perf_counter: Fix output-sharing error path
  perf trace: Fix read_string()
  perf trace: Print out in nanoseconds
  perf tools: Seek to the end of the header area
  perf trace: Fix parsing of perf.data
  perf trace: Sample timestamps as well
  perf_counter: Introduce new (non-)paranoia level to allow raw tracepoint access
  perf trace: Sample the CPU too
  perf tools: Work around strict aliasing related warnings
  perf tools: Clean up warnings list in the Makefile
  perf tools: Complete support for dynamic strings
  ...

Merge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (55 commits)
  arch/x86/oprofile/op_model_amd.c: fix op_amd_handle_ibs() return type
  Revert "x86: oprofile/op_model_amd.c set return values for op_amd_handle_ibs()"
  x86/oprofile: Small coding style fixes
  x86/oprofile: Add counter reservation check for virtual counters
  x86/oprofile: Implement op_x86_virt_to_phys()
  oprofile: Adding switch counter to oprofile statistic variables
  x86/oprofile: Implement mux_clone()
  x86/oprofile: Enable multiplexing only if the model supports it
  x86/oprofile: Add function has_mux() to check multiplexing support
  x86/oprofile: Modify initialization of num_virt_counters
  x86/oprofile: Remove unused num_virt_controls from struct op_x86_model_spec
  x86/oprofile: Remove const qualifier from struct op_x86_model_spec
  x86/oprofile: Moving nmi_cpu_switch() in nmi_int.c
  x86/oprofile: Moving nmi_cpu_save/restore_mpx_registers() in nmi_int.c
  x86/oprofile: Moving nmi_setup_cpu_mux() in nmi_int.c
  x86/oprofile: Implement multiplexing setup/shutdown functions
  oprofile: Grouping multiplexing code in op_model_amd.c
  oprofile: Introduce op_x86_phys_to_virt()
  oprofile: Grouping multiplexing code in oprof.c
  oprofile: Remove oprofile_multiplexing_init()
  ...

Merge branch 'irq-threaded-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-threaded-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Do not mask oneshot edge type interrupts
  genirq: Support nested threaded irq handling
  genirq: Add buslock support
  genirq: Add oneshot support

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  pci/intr_remapping: Allocate irq_iommu on node
  irq: Add irq_node() primitive
  irq: Make sure irq_desc for legacy irq get correct node setting
  genirq: Add prototype for handle_nested_irq()
  irq: Remove superfluous NULL pointer check in check_irq_resend()
  irq: Clean up by removing irqfixup MODULE_PARM_DESC()
  genirq: Fix comment describing suspend_device_irqs()
  genirq: Remove obsolete defines and typedefs

Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits)
  rcu: Move end of special early-boot RCU operation earlier
  rcu: Changes from reviews: avoid casts, fix/add warnings, improve comments
  rcu: Create rcutree plugins to handle hotplug CPU for multi-level trees
  rcu: Remove lockdep annotations from RCU's _notrace() API members
  rcu: Add #ifdef to suppress __rcu_offline_cpu() warning in !HOTPLUG_CPU builds
  rcu: Add CPU-offline processing for single-node configurations
  rcu: Add "notrace" to RCU function headers used by ftrace
  rcu: Remove CONFIG_PREEMPT_RCU
  rcu: Merge preemptable-RCU functionality into hierarchical RCU
  rcu: Simplify rcu_pending()/rcu_check_callbacks() API
  rcu: Use debugfs_remove_recursive() simplify code.
  rcu: Merge per-RCU-flavor initialization into pre-existing macro
  rcu: Fix online/offline indication for rcudata.csv trace file
  rcu: Consolidate sparse and lockdep declarations in include/linux/rcupdate.h
  rcu: Renamings to increase RCU clarity
  rcu: Move private definitions from include/linux/rcutree.h to kernel/rcutree.h
  rcu: Expunge lingering references to CONFIG_CLASSIC_RCU, optimize on !SMP
  rcu: Delay rcu_barrier() wait until beginning of next CPU-hotunplug operation.
  rcu: Fix typo in rcu_irq_exit() comment header
  rcu: Make rcupreempt_trace.c look at offline CPUs
  ...

Merge branch 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  printk: Fix "printk: Enable the use of more than one CON_BOOT (early console)"
  printk: Restore previous console_loglevel when re-enabling logging
  printk: Ensure that "console enabled" messages are printed on the console
  printk: Enable the use of more than one CON_BOOT (early console)

Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (32 commits)
  locking, m68k/asm-offsets: Rename signal defines
  locking: Inline spinlock code for all locking variants on s390
  locking: Simplify spinlock inlining
  locking: Allow arch-inlined spinlocks
  locking: Move spinlock function bodies to header file
  locking, m68k: Calculate thread_info offset with asm offset
  locking, m68k/asm-offsets: Rename pt_regs offset defines
  locking, sparc: Rename __spin_try_lock() and friends
  locking, powerpc: Rename __spin_try_lock() and friends
  lockdep: Remove recursion stattistics
  lockdep: Simplify lock_stat seqfile code
  lockdep: Simplify lockdep_chains seqfile code
  lockdep: Simplify lockdep seqfile code
  lockdep: Fix missing entries in /proc/lock_chains
  lockdep: Fix missing entry in /proc/lock_stat
  lockdep: Fix memory usage info of BFS
  lockdep: Reintroduce generation count to make BFS faster
  lockdep: Deal with many similar locks
  lockdep: Introduce lockdep_assert_held()
  lockdep: Fix style nits
  ...

Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (59 commits)
  x86/gart: Do not select AGP for GART_IOMMU
  x86/amd-iommu: Initialize passthrough mode when requested
  x86/amd-iommu: Don't detach device from pt domain on driver unbind
  x86/amd-iommu: Make sure a device is assigned in passthrough mode
  x86/amd-iommu: Align locking between attach_device and detach_device
  x86/amd-iommu: Fix device table write order
  x86/amd-iommu: Add passthrough mode initialization functions
  x86/amd-iommu: Add core functions for pd allocation/freeing
  x86/dma: Mark iommu_pass_through as __read_mostly
  x86/amd-iommu: Change iommu_map_page to support multiple page sizes
  x86/amd-iommu: Support higher level PTEs in iommu_page_unmap
  x86/amd-iommu: Remove old page table handling macros
  x86/amd-iommu: Use 2-level page tables for dma_ops domains
  x86/amd-iommu: Remove bus_addr check in iommu_map_page
  x86/amd-iommu: Remove last usages of IOMMU_PTE_L0_INDEX
  x86/amd-iommu: Change alloc_pte to support 64 bit address space
  x86/amd-iommu: Introduce increase_address_space function
  x86/amd-iommu: Flush domains if address space size was increased
  x86/amd-iommu: Introduce set_dte_entry function
  x86/amd-iommu: Add a gneric version of amd_iommu_flush_all_devices
  ...

Merge branch 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Detect mismatched requeue targets
  futex: Correct futex_wait_requeue_pi() commentary

Merge branch 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debug lockups: Improve lockup detection, fix generic arch fallback
  debug lockups: Improve lockup detection