- 28 Mar, 2014 11 commits
-
-
Lespiau, Damien authored
Right now a debug message looks like: [drm:drm_ioctl], pid=860, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC That first comma looks weird as we already have ']' as a separator. Remove it. If anyone sees this commit message and also thinks that auth=1 isn't the most useful info to have here, let's just say I'd happily review a patch removing it. If I don't get annoyed enough to submit a patch, that is. Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Lespiau, Damien authored
This is always DRM_NAME, so we can just make it part of the format string instead of asking prink to do it for us. Signed-off-by:
-
Lespiau, Damien authored
The DRM_LOG* macros where the only sites where drm_ut_debug_printk was called with NULL arguments for prefix and function_name. Now that they are gone, we can remove that case. Signed-off-by:
-
Lespiau, Damien authored
In the logging code, we are currently checking is we need to output in drm_ut_debug_printk(). This is too late. The problem is that when we write something like: DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", connector->base.id, drm_get_connector_name(connector), connector->encoder->base.id, drm_get_encoder_name(connector->encoder)); We start by evaluating the arguments (so call drm_get_connector_name() and drm_get_connector_name()) before ending up in drm_ut_debug_printk() which will then does nothing. This means we execute a lot of instructions (drm_get_connector_name(), in turn, calls snprintf() for example) to happily discard them in the normal case, drm.debug=0. So, let's put the test on drm_debug earlier, in the macros themselves. Sprinkle an unlikely() as well for good measure. Signed-off-by: -
Lespiau, Damien authored
Signed-off-by:
-
Lespiau, Damien authored
There are only a few users of the DRM_LOG_KMS() macro. We can simplify the DRM code a bit by replacing them by DRM_DEBUG_KMS(). Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Lespiau, Damien authored
There are only a few users of the DRM_LOG_KMS() macro. We can simplify the DRM code a bit by replacing them by DRM_DEBUG_KMS(). Signed-off-by:
-
Lespiau, Damien authored
There are only a few users of the DRM_LOG_KMS() macro. We can simplify the DRM code a bit by replacing them by DRM_DEBUG_KMS(). Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Lespiau, Damien authored
There are only a few users of the DRM_LOG_KMS() macro. We can simplify the DRM code a bit by replacing them by DRM_DEBUG_KMS(). Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Lespiau, Damien authored
This macro was trying to use the non existing DRM_UT_MODE debug category and looks like it should be covered by DRM_LOG_KMS(). Signed-off-by:
-
Lespiau, Damien authored
That comment wasn't super-readable, so I tried to improve it: - Put the comment before the values it's documenting - Add a mention to PRIME - Reword things a bit to be a lighter read - Add a note about the option to set the debug value at run-time Signed-off-by:
-
- 27 Mar, 2014 1 commit
-
-
Arnd Bergmann authored
The recently added PTN3460 device driver uses interfaces that are provided by the KMS helper infrastructure, so we should explicitly select that to avoid this linker error: ERROR: "drm_helper_probe_single_connector_modes" [drivers/gpu/drm/bridge/ptn3460.ko] undefined! ERROR: "drm_helper_connector_dpms" [drivers/gpu/drm/bridge/ptn3460.ko] undefined! We have to drop the I2C dependency to avoid a circular dependency chain, but that's ok because DRM already selects I2C. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 26 Mar, 2014 28 commits
-
-
Dave Airlie authored
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next - first stage of (ongoing) gpu fault recovery work - initial support for maxwell (binary driver fw needed) - various random fixes across the board * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (87 commits) drm/nouveau: fix missing newline drm/nouveau/bios: fetch the vbios from PROM using only aligned 32-bit accesses drm/nouveau/therm: let the vbios decide on the automatic fan management mode drm/nvd7/therm: handle another kind of PWM fans drm/nouveau/pm/fan: drop the fan lock in fan_update() before rescheduling drm/nouveau: fix small thinko in vblank timestamping. drm/nouveau/therm: check for sensor presence with requested mode, not current drm/nouveau/disp/dp: allow 540MHz data rate drm/nouveau: recognise higher link rate for available dp bw calculations drm/nouveau/disp: limit dp capabilities as per dcb drm/nva3/fbram: restrict training pattern setup to GT218 drm/nva3/devinit: restrict script access to some PFB regs drm/nouveau/devinit: add interface to check if a mmio access by scripts is ok drm/nouveau/bios: have strap reads show on devinit spam debug level drm/nv50/gpio: fixup reset for gpios >= 16 drm/nv50/gpio: exclude sense value from mask when changing registers drm/gk104/gr: therm magic needed on some kepler boards drm/gm107/gr: initial support drm/gf100-/gf: fix a stupid typo, waiting on wrong signal for mmctx drm/nouveau/bios: parsing of some random table needed to bring up gr ...
-
Alexandre Courbot authored
Add a missing newline at the end of a DRM_INFO message. Signed-off-by:
Alexandre Courbot <acourbot@nvidia.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Martin Peres authored
Other kind of accesses are unreliable on Kepler cards. As advised by NVIDIA, let's only use 32-bit accesses to fetch the vbios from PROM. This fixes vbios fetching on my nve7 which failed in certain specific conditions. I suggest we Cc stable, for all kernels they still maintain after the big rewrite. Suggested-by:
Christian Zander <czander@nvidia.com> Signed-off-by:
Martin Peres <martin.peres@free.fr> Signed-off-by:
-
Martin Peres authored
This should fix automatic fan management on fermi cards who do not have 0x46 entries in the thermal table. On my nve6, the blob sets the default linear range from 40°C to 100°C but my nvcf's default values are 40°C to 85°C. Let's keep 85 as a default for everyone. Signed-off-by:
Martin Peres <martin.peres@labri.fr> Tested-by:
Timothée Ravier <tim@siosm.fr> Signed-off-by:
-
Martin Peres authored
This should fix fan management on many nvd7+ chipsets. Signed-off-by:
-
Martin Peres authored
This should fix a deadlock that has been reported to us where fan_update() would hold the fan lock and try to grab the alarm_program_lock to reschedule an update. On an other CPU, the alarm_program_lock would have been taken before calling fan_update(), leading to a deadlock. We should Cc: <stable@vger.kernel.org> # 3.9+ Reported-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Tested-by:
-
Mario Kleiner authored
*hpos horizontal scanout position doesn't need to be corrected to count the pixels between hactive end and htotal negative. That is only needed for *vpos to count lines until end of vblank for the vblank timestamping. Use hpos as is without correction. Removes occassional spikes in timestamps of up to 1 scanline duration, thereby improves accuracy to about +/- 2 usecs instead of +/- 12 usecs, wrt. true onset time as measured with high precision equipment on NV-A5. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ilia Mirkin authored
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76319Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Ben Skeggs authored
I should resurrect/merge that cleanup branch to remove the weird duplication.. One day. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
It doesn't look like the others have the registers. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Shouldn't effect anything, was just momentarily confusing while looking at traces. Signed-off-by: -
Ben Skeggs authored
Not needed everywhere, and potentially not safe to do depending on how the rest of PTHERM is configured... Signed-off-by: -
Ben Skeggs authored
Our ucode only partially works at this point, so requiring binary fw image for now. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
This does *not* (and is not intended to) fix the issue reported by Christoph Rudorff on the nouveau mailinglist. The patch proposed (which is similar to this one, but also reorders whether we disable accel or call fb_set_suspend first), papers over another problem entirely by avoiding touching the framebuffer. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Unit names come from the Android GK20A driver. Signed-off-by: -
Ben Skeggs authored
Change from traces of a newer binary driver version. Signed-off-by:
-
