- 27 Nov, 2010 2 commits
-
-
Josef Bacik authored
We have been failing xfstest 228 forever, because we don't check to make sure the new inode size is acceptable as far as RLIMIT is concerned. Just check to make sure it's ok to create a inode with this new size and error out if not. With this patch we now pass 228. Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Josef Bacik authored
There is a typo in __btrfs_prealloc_file_range() where we set the i_size to actual_len/cur_offset, and then just set it to cur_offset again, and do the same with btrfs_ordered_update_i_size(). This fixes it back to keeping i_size in a local variable and then updating i_size properly. Tested this with xfs_io -F -f -c "falloc 0 1" -c "pwrite 0 1" foo stat'ing foo gives us a size of 1 instead of 4096 like it was. Thanks, Signed-off-by:
-
- 22 Nov, 2010 16 commits
-
-
Chris Mason authored
If we fail to find a pointer in the radix tree, don't try to deref the NULL one we do have. Signed-off-by: -
Josef Bacik authored
Everybody who calls btrfs_add_nondir just passes in the dentry of the new file and then dereference dentry->d_parent->d_inode, but everybody who calls btrfs_add_nondir() are already passed the parent's inode. So instead of dereferencing dentry->d_parent, just make btrfs_add_nondir take the dir inode as an argument and pass that along so we don't have to worry about d_parent. Thanks, Signed-off-by:
-
Josef Bacik authored
Since we walk up the path logging all of the parts of the inode's path, we need to hold i_mutex to make sure that the inode is not renamed while we're logging everything. btrfs_log_dentry_safe does dget_parent and all of that jazz, but we may get unexpected results if the rename changes the inode's location while we're higher up the path logging those dentries, so do this for safety reasons. Thanks, Signed-off-by:
-
Josef Bacik authored
There are lots of places where we do dentry->d_parent->d_inode without holding the dentry->d_lock. This could cause problems with rename. So instead we need to use dget_parent() and hold the reference to the parent as long as we are going to use it's inode and then dput it at the end. Signed-off-by:
-
Josef Bacik authored
When creating new inodes we don't setup inode->i_generation. So if we generate an fh with a newly created inode we save the generation of 0, but if we flush the inode to disk and have to read it back when getting the inode on the server we'll have the right i_generation, so gens wont match and we get ESTALE. This patch properly sets inode->i_generation when we create the new inode and now I'm no longer getting ESTALE. Thanks, Signed-off-by:
-
Josef Bacik authored
People kept reporting NFS issues, specifically getting ESTALE alot. I figured out how to reproduce the problem SERVER mkfs.btrfs /dev/sda1 mount /dev/sda1 /mnt/btrfs-test <add /mnt/btrfs-test to /etc/exports> btrfs subvol create /mnt/btrfs-test/foo service nfs start CLIENT mount server:/mnt/btrfs /mnt/test cd /mnt/test/foo ls SERVER echo 3 > /proc/sys/vm/drop_caches CLIENT ls <-- get an ESTALE here This is because the standard way to lookup a name in nfsd is to use readdir, and what it does is do a readdir on the parent directory looking for the inode of the child. So in this case the parent being / and the child being foo. Well subvols all have the same inode number, so doing a readdir of / looking for inode 256 will return '.', which obviously doesn't match foo. So instead we need to have our own .get_name so that we can find the right name. Our .get_name will either lookup the inode backref or the root backref, whichever we're looking for, and return the name we find. Running the above reproducer with this patch results in everything acting the way its supposed to. Thanks, Signed-off-by:
-
Mariusz Kozlowski authored
Fixes these sparse warnings: fs/btrfs/ctree.h:811:17: error: dubious one-bit signed bitfield fs/btrfs/ctree.h:812:20: error: dubious one-bit signed bitfield fs/btrfs/ctree.h:813:19: error: dubious one-bit signed bitfield Signed-off-by:
Mariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by:
-
Li Zefan authored
Symlinks and files of other types show different device numbers, though they are on the same partition: $ touch tmp; ln -s tmp tmp2; stat tmp tmp2 File: `tmp' Size: 0 Blocks: 0 IO Block: 4096 regular empty file Device: 15h/21d Inode: 984027 Links: 1 --- snip --- File: `tmp2' -> `tmp' Size: 3 Blocks: 0 IO Block: 4096 symbolic link Device: 13h/19d Inode: 984028 Links: 1 Reported-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
-
Li Zefan authored
Set src_offset = 0, src_length = 20K, dest_offset = 20K. And the original filesize of the dest file 'file2' is 30K: # ls -l /mnt/file2 -rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2 Now clone file1 to file2, the dest file should be 40K, but it still shows 30K: # ls -l /mnt/file2 -rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2 Signed-off-by:
-
Li Zefan authored
We've done the check for src_offset and src_length, and We should also check dest_offset, otherwise we'll corrupt the destination file: (After cloning file1 to file2 with unaligned dest_offset) # cat /mnt/file2 cat: /mnt/file2: Input/output error Signed-off-by:
-
Josef Bacik authored
When I added the clear_cache option I screwed up and took the break out of the space_cache case statement, so whenever you mount with space_cache you also get clear_cache, which does you no good if you say set space_cache in fstab so it always gets set. This patch adds the break back in properly. Signed-off-by:
-
Arne Jansen authored
'unused' calculated with wrong sign in reserve_metadata_bytes(). This might have lead to unwanted over-reservations. Signed-off-by:
Arne Jansen <sensille@gmx.net> Reviewed-by:
-
Miao Xie authored
btrfs paniced when we write >64KB data by direct IO at one time. Reproduce steps: # mkfs.btrfs /dev/sda5 /dev/sda6 # mount /dev/sda5 /mnt # dd if=/dev/zero of=/mnt/tmpfile bs=100K count=1 oflag=direct Then btrfs paniced: mapping failed logical 1103155200 bio len 69632 len 12288 ------------[ cut here ]------------ kernel BUG at fs/btrfs/volumes.c:3010! [SNIP] Pid: 1992, comm: btrfs-worker-0 Not tainted 2.6.37-rc1 #1 D2399/PRIMERGY RIP: 0010:[<ffffffffa03d1462>] [<ffffffffa03d1462>] btrfs_map_bio+0x202/0x210 [btrfs] [SNIP] Call Trace: [<ffffffffa03ab3eb>] __btrfs_submit_bio_done+0x1b/0x20 [btrfs] [<ffffffffa03a35ff>] run_one_async_done+0x9f/0xb0 [btrfs] [<ffffffffa03d3d20>] run_ordered_completions+0x80/0xc0 [btrfs] [<ffffffffa03d45a4>] worker_loop+0x154/0x5f0 [btrfs] [<ffffffffa03d4450>] ? worker_loop+0x0/0x5f0 [btrfs] [<ffffffffa03d4450>] ? worker_loop+0x0/0x5f0 [btrfs] [<ffffffff81083216>] kthread+0x96/0xa0 [<ffffffff8100cec4>] kernel_thread_helper+0x4/0x10 [<ffffffff81083180>] ? kthread+0x0/0xa0 [<ffffffff8100cec0>] ? kernel_thread_helper+0x0/0x10 We fix this problem by splitting bios when we submit bios. Reported-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Tested-by:
-
Miao Xie authored
extent_bio_alloc() and compressed_bio_alloc() are similar, cleanup similar source code. Signed-off-by:
-
Miao Xie authored
bio_endio() will free dip and dip->csums, so dip and dip->csums twice will be freed twice. Fix it. Signed-off-by:
-
Chris Mason authored
Migrate page will directly call the btrfs btree writepage function, which isn't actually allowed. Our writepage assumes that you have locked the extent_buffer and flagged the block as written. Without doing these steps, we can corrupt metadata blocks. A later commit will remove the btree writepage function since it is really only safely used internally by btrfs. We use writepages for everything else. Signed-off-by:
-
- 30 Oct, 2010 4 commits
-
-
Chris Mason authored
During unlink we remove any references to the inode from the tree log. It can return -ENOENT and other errors, and this changes the unlink code to deal with it. Signed-off-by: -
Sage Weil authored
Add a mount option user_subvol_rm_allowed that allows users to delete a (potentially non-empty!) subvol when they would otherwise we allowed to do an rmdir(2). We duplicate the may_delete() checks from the core VFS code to implement identical security checks (minus the directory size check). We additionally require that the user has write+exec permission on the subvol root inode. Signed-off-by:
Sage Weil <sage@newdream.net> Signed-off-by:
-
Sage Weil authored
There is no reason to force an immediate commit when deleting a snapshot. Users have some expectation that space from a deleted snapshot be freed immediately, but even if we do commit the reclaim is a background process. If users _do_ want the deletion to be durable, they can call 'sync'. Signed-off-by:
-
Sage Weil authored
Create a snap without waiting for it to commit to disk. The ioctl is ordered such that subsequent operations will not be contained by the created snapshot, and the commit is initiated, but the ioctl does not wait for the snapshot to commit to disk. We return the specific transid to userspace so that an application can wait for this specific snapshot creation to commit via the WAIT_SYNC ioctl. Signed-off-by:
-
- 29 Oct, 2010 18 commits
-
-
Sage Weil authored
START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by:
-
Sage Weil authored
Add support for an async transaction commit that is ordered such that any subsequent operations will join the following transaction, but does not wait until the current commit is fully on disk. This avoids much of the latency associated with the btrfs_commit_transaction for callers concerned with serialization and not safety. The wait_for_unblock flag controls whether we wait for the 'middle' portion of commit_transaction to complete, which is necessary if the caller expects some of the modifications contained in the commit to be available (this is the case for subvol/snapshot creation). Signed-off-by:
-
Sage Weil authored
We calculate timeout (either 1 or MAX_SCHEDULE_TIMEOUT) based on whether num_writers > 1 or should_grow at the top of the loop. Then, much much later, we wait for that timeout if either num_writers or should_grow is true. However, it's possible for a racing process (calling btrfs_end_transaction()) to decrement num_writers such that we wait forever instead of for 1. Fix this by deciding how long to wait when we wait. Include a smp_mb() before checking if the waitqueue is active to ensure the num_writers is visible. Signed-off-by:
-
Sage Weil authored
I'm no lockdep expert, but this appears to make the lockdep warning go away for the i_mutex locking in the clone ioctl. Signed-off-by:
-
Sage Weil authored
We had an edge case issue where the requested range was just following an existing extent. Instead of skipping to the next extent, we used the previous one which lead to having zero sized extents. Signed-off-by:
Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by:
-
Sage Weil authored
The lookup_first_ordered_extent() was done on the wrong inode, and the ->delalloc_bytes test was wrong, as the following btrfs_wait_ordered_range() would only invoke a range write and wouldn't write the entire file data range. Also, a bad parameter was passed to btrfs_wait_ordered_range(). Signed-off-by:
-
Chris Mason authored
The alloc_target variable is not really used. Signed-off-by: -
Andi Kleen authored
These are all the cases where a variable is set, but not read which are not bugs as far as I can see, but simply leftovers. Still needs more review. Found by gcc 4.6's new warnings Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andi Kleen authored
These are all the cases where a variable is set, but not read which are really bugs. - Couple of incorrect error handling fixed. - One incorrect use of a allocation policy - Some other things Still needs more review. Found by gcc 4.6's new warnings. [akpm@linux-foundation.org: fix build. Might have been bitrot] Signed-off-by:
-
Julia Lawall authored
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
-
Chris Mason authored
When btrfs is mounted in degraded mode, it has some internal structures to track the missing devices. This missing device is setup as readonly, but the mapping code can get upset when we try to write to it. This changes the mapping code to return -EIO instead of oops when we try to write to the readonly device. Signed-off-by: -
Miao Xie authored
This patch reduces the CPU time spent in the extent buffer search by using the radix tree instead of the rbtree and using the rcu lock instead of the spin lock. I did a quick test by the benchmark tool[1] and found the patch improve the file creation/deletion performance problem that I have reported[2]. Before applying this patch: Create files: Total files: 50000 Total time: 0.971531 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.366761 Average time: 0.000027 After applying this patch: Create files: Total files: 50000 Total time: 0.927455 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.292280 Average time: 0.000026 [1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3 [2] http://marc.info/?l=linux-btrfs&m=128212635122920&w=2Signed-off-by:
-
Miao Xie authored
restructure try_release_extent_buffer() and write a function to release the extent buffer. It will be used later. Signed-off-by:
-
Chris Mason authored
We have a fairly complex set of loops around walking our list of delalloc inodes when we find metadata delalloc space running low. It doesn't work very well, can use large amounts of CPU and doesn't do very efficient writeback. This switches us to kick the bdi flusher threads instead. All dirty data in btrfs is accounted as delalloc data, so this is very similar in terms of what it writes, but we're able to just kick off the IO and wait for progress. Signed-off-by: -
Chris Mason authored
An earlier commit tried to keep us from allocating too many empty metadata chunks. It was somewhat too restrictive and could lead to ENOSPC errors on empty filesystems. This increases the limits to about 5% of the FS size, allowing more metadata chunks to be preallocated. Signed-off-by: -
Chris Mason authored
When btrfs is running low on metadata space, it needs to force delayed allocation pages to disk. It currently does this with a suboptimal walk of a private list of inodes with delayed allocation, and it would be much better if we used the generic flusher threads. writeback_inodes_sb_if_idle would be ideal, but it waits for the flusher thread to start IO on all the dirty pages in the FS before it returns. This adds variants of writeback_inodes_sb* that allow the caller to control how many pages get sent down. Signed-off-by: -
Chris Mason authored
When btrfs discovers the generation number in a btree block is incorrect, it can loop forever without forcing the RAID code to try a valid mirror, and without returning EIO. This changes things to properly kick out the EIO. Signed-off-by:
-
