- 28 Apr, 2008 7 commits
-
-
Eric Paris authored
Change maintainers to include me and al viro Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Eric Paris authored
Key lengths were arbitrarily limited to 32 characters. If userspace is going to start using the single kernel key field as multiple virtual key fields (example key=key1,key2,key3,key4) we should give them enough room to work. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Eric Paris authored
This patch standardized the string auditing interfaces. No userspace changes will be visible and this is all just cleanup and consistancy work. We have the following string audit interfaces to use: void audit_log_n_hex(struct audit_buffer *ab, const unsigned char *buf, size_t len); void audit_log_n_string(struct audit_buffer *ab, const char *buf, size_t n); void audit_log_string(struct audit_buffer *ab, const char *buf); void audit_log_n_untrustedstring(struct audit_buffer *ab, const char *string, size_t n); void audit_log_untrustedstring(struct audit_buffer *ab, const char *string); This may be the first step to possibly fixing some of the issues that people have with the string output from the kernel audit system. But we still don't have an agreed upon solution to that problem. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Eric Paris authored
A deadlock is possible between kauditd and auditd under load if auditd receives a signal. When auditd receives a signal it sends a netlink message to the kernel asking for information about the sender of the signal. In that same context the audit system will attempt to send a netlink message back to the userspace auditd. If kauditd has already filled the socket buffer (see netlink_attachskb()) auditd will now put itself to sleep waiting for room to send the message. Since auditd is responsible for draining that socket we have a deadlock. The fix, since the response from the kernel does not need to be synchronous is to send the signal information back to auditd in a separate thread. And thus auditd can continue to drain the audit queue normally. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Eric Paris authored
This patch causes the kernel audit subsystem to store up to audit_backlog_limit messages for use by auditd if it ever appears sometime in the future in userspace. This is useful to collect audit messages during bootup and even when auditd is stopped. This is NOT a reliable mechanism, it does not ever call audit_panic, nor should it. audit_log_lost()/audit_panic() are called during the normal delivery mechanism. The messages are still sent to printk/syslog as usual and if too many messages appear to be queued they will be silently discarded. I liked doing it by default, but this patch only uses the queue in question if it was booted with audit=1 or if the kernel was built enabling audit by default. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Eric Paris authored
Previously I added sessionid output to all audit messages where it was available but we still didn't know the sessionid of the sender of netlink messages. This patch adds that information to netlink messages so we can audit who sent netlink messages. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Eric Paris authored
A couple of audit printk statements did not have a newline. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 27 Apr, 2008 33 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (40 commits) [SCSI] jazz_esp, sgiwd93, sni_53c710, sun3x_esp: fix platform driver hotplug/coldplug [SCSI] aic7xxx: add const [SCSI] aic7xxx: add static [SCSI] aic7xxx: Update _shipped files [SCSI] aic7xxx: teach aicasm to not emit unused debug code/data [SCSI] qla2xxx: Update version number to 8.02.01-k2. [SCSI] qla2xxx: Correct regression in relogin code. [SCSI] qla2xxx: Correct misc. endian and byte-ordering issues. [SCSI] qla2xxx: make qla2x00_issue_iocb_timeout() static [SCSI] qla2xxx: qla_os.c, make 2 functions static [SCSI] qla2xxx: Re-register FDMI information after a LIP. [SCSI] qla2xxx: Correct SRB usage-after-completion/free issues. [SCSI] qla2xxx: Correct ISP84XX verify-chip response handling. [SCSI] qla2xxx: Wakeup DPC thread to process any deferred-work requests. [SCSI] qla2xxx: Collapse RISC-RAM retrieval code during a firmware-dump. [SCSI] m68k: new mac_esp scsi driver [SCSI] zfcp: Add some statistics provided by the FCP adapter to the sysfs [SCSI] zfcp: Print some messages only during ERP [SCSI] zfcp: Wait for free SBAL during exchange config [SCSI] scsi_transport_fc: fc_user_scan correction ...
-
Kay Sievers authored
Since commit 43cc71ee Author: Kay Sievers <kay.sievers@vrfy.org> Date: Sat Aug 18 04:40:39 2007 +0200 platform: prefix MODALIAS with "platform:" the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable SCSI platform drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers, registration fixes] [akpm@linux-foundation.org: fix sgiwd93.c] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Denys Vlasenko authored
This patch adds more const keywords where appropriate. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Denys Vlasenko authored
This patch adds static (and sometimes const) keywords where appropriate. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Hannes Reinecke authored
Update the precompiled sequencer code to match the latest aicasm changes. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Hannes Reinecke authored
Add a 'count' variable to each symbol which gets increased every time the symbol is referenced. And then modify the register definition to include counts for symbols which are referenced from the source code only and not from the sequencer code. This will give us an automatic usage count for the symbols with only minimal hand-crafting. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Commit 63a8651f ([SCSI] qla2xxx: Correct infinite-login-retry issue.) introduced a small regression where a successful relogin would result in an fcport's loop_id to be incorrectly reset to FC_NO_LOOP_ID. Only clear-out loopid, if retries have been 'truly' exhausted. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Seokmann Ju authored
There were several places in the driver which could cause byte ordering problem as provided by Al Viro <viro@ZenIV.linux.org.uk>. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Adrian Bunk authored
This patch makes the needlessly global qla2x00_issue_iocb_timeout() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Adrian Bunk authored
This patch makes the following needlessly global functions static: - qla2x00_alloc_work() - qla2x00_post_work() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Original code would (incorrectly) only re-register after a loop-down condition. Also, FDMI registration should be enabled by default. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
The driver is incorrectly assuming that the 'sp' reference held in qla2[x00|4xx]_abort_command() is valid after the mailbox command is issued to abort the exchange. It is *not*, as the command may be completed during interrupt context before control is returned to the mailbox caller. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Earlier code could trigger an infinite-retry if 1st invocation returned a non-CS_COMPLETE status. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Use the more efficient read-DMA'ble-buffer mailbox commands rather than reading a single word/dword at a time. We also remove a bulk of the duplicate mailbox command-handling codes in favor of more generic read-memory() routines (qla2xxx_dump_ram() and qla24xx_dump_ram()). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Finn Thain authored
Replace the mac_esp driver with a new one based on the esp_scsi core. For esp_scsi: add support for sync transfers for the PIO mode, add a new esp_driver_ops method to get the maximum dma transfer size (like the old NCR53C9x driver), and some cleanups. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Swen Schillig authored
The new FCP adapter statistics provide a variety of information about the virtual adapter (subchannel). In order to collect this information the zfcp driver is extended to query this information. The information provided by the new FCP adapter statistics can be fetched by reading from the following files in the sysfs filesystem /sys/class/scsi_host/host<n>/seconds_active /sys/class/scsi_host/host<n>/requests /sys/class/scsi_host/host<n>/megabytes /sys/class/scsi_host/host<n>/utilization These are the statistics on a virtual adapter (subchannel) level. The information provided is raw and not modified or interpreted by any means. No interpretation or modification of the values is done by the zfcp driver. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Swen Schillig authored
When statistics are polled from sysfs, the statistics use the same commands as the adapter initialization. Change the messages printed here, so they are only printed during initialization and not for each poll of adapter data. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Swen Schillig authored
When sending a exchange config data command, wait for a free SBAL. This does not matter during adapter initialization, but this is required for pulling adapter statistics during high I/O load. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
James Smart authored
Way back when, when the fc_user_scan routine was created, it kept some of its original logic that walked the rport list and kicked off a scan. Unfortunately, it didn't keep any of the locking around the rport list, nor did it consider the synchronous nature of the scan invoked. The result, there are some scan requests where the rport list changes, thus a subsequent scan is called on a bogus rport structure and the system NMI's. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Jeff Garzik authored
- where the 'irq' function argument is known never to be used, rename it to 'dummy' to make this more obvious - replace per-irq lookup functions and tables with a direct reference to data object obtained via 'dev_id' function argument, passed from request_irq() Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Randy Dunlap authored
scsi_transport_spi.c needs to #include <linux/sysfs.h>: next-20080423/drivers/scsi/scsi_transport_spi.c:1467: error: implicit declaration of function 'sysfs_update_group' make[3]: *** [drivers/scsi/scsi_transport_spi.o] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Adrian Bunk authored
This patch fixes off-by-one errors in error checks (the variables are used as array indexes for arrays with MAX_SCSI_TAR resp. MAX_LUN elements) spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Hannes Reinecke authored
The function type_check() in aicasm grammar code was never used properly due to a bug. This patch fixes it up and ensures it's only called if appropriate. In addition the unused 16bit instruction are disabled, but left in the code for reference. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
James Bottomley authored
We're getting a WARN_ON from SLUB indicating that we're trying to free caches with in-use objects. The root cause is a new dependency in the command/sense free on unchecked_isa_dma. The WARN_ON is caused by drivers which change this in their setup after the command/sense cache is allocated. The fix is to move the allocation of this cache into scsi_add_host() so things like gdth have an opportunity to modify it between alloc and add (but *not* after). The true fix would be to move unchecked_isa_dma into the template and out of the host, so it because a truly read only variable. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvmLinus Torvalds authored
* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (147 commits) KVM: kill file->f_count abuse in kvm KVM: MMU: kvm_pv_mmu_op should not take mmap_sem KVM: SVM: remove selective CR0 comment KVM: SVM: remove now obsolete FIXME comment KVM: SVM: disable CR8 intercept when tpr is not masking interrupts KVM: SVM: sync V_TPR with LAPIC.TPR if CR8 write intercept is disabled KVM: export kvm_lapic_set_tpr() to modules KVM: SVM: sync TPR value to V_TPR field in the VMCB KVM: ppc: PowerPC 440 KVM implementation KVM: Add MAINTAINERS entry for PowerPC KVM KVM: ppc: Add DCR access information to struct kvm_run ppc: Export tlb_44x_hwater for KVM KVM: Rename debugfs_dir to kvm_debugfs_dir KVM: x86 emulator: fix lea to really get the effective address KVM: x86 emulator: fix smsw and lmsw with a memory operand KVM: x86 emulator: initialize src.val and dst.val for register operands KVM: SVM: force a new asid when initializing the vmcb KVM: fix kvm_vcpu_kick vs __vcpu_run race KVM: add ioctls to save/store mpstate KVM: Rename VCPU_MP_STATE_* to KVM_MP_STATE_* ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (49 commits) ide-tape: remove tape->merge_stage ide-tape: mv tape->merge_stage_size tape->merge_bh_size ide-tape: mv idetape_empty_write_pipeline ide_tape_flush_merge_buffer ide-tape: mv idetape_discard_read_pipeline ide_tape_discard_merge_buffer ide-tape: make __idetape_discard_read_pipeline() of type void ide: remove now unused ide_pci_create_host_proc() ide: remove /proc/ide/ali ide-tape: improve buffer pages freeing strategy ide-tape: mv tape->pages_per_stage tape->pages_per_buffer ide-tape: mv tape->stage_size tape->buffer_size ide-tape: improve buffer allocation strategy ide: add struct ide_io_ports (take 3) ide: make ide_unregister() take 'ide_hwif_t *' as an argument (take 2) ide: sanitize ide_unregister() usage mpc8xx-ide: use ide_find_port() ide: add "noacpi" / "acpigtf" / "acpionboot" parameters gayle: add "doubler" parameter ide: add "cdrom=" and "chs=" parameters ide: add "nodma|noflush|noprobe|nowerr=" parameters ide: remove obsoleted "hdx=autotune" kernel parameter ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-idle-fixLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-idle-fix: fix idle (arch, acpi and apm) and lockdep
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - fix build failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Add helper to move QP to ready-to-send mlx4_core: Add HW queues allocation helpers RDMA/nes: Remove volatile qualifier from struct nes_hw_cq.cq_vbase mlx4_core: CQ resizing should pass a 0 opcode modifier to MODIFY_CQ mlx4_core: Move kernel doorbell management into core IB/ehca: Bump version number to 0026 IB/ehca: Make some module parameters bool, update descriptions IB/ehca: Remove mr_largepage parameter IB/ehca: Move high-volume debug output to higher debug levels IB/ehca: Prevent posting of SQ WQEs if QP not in RTS IPoIB: Handle 4K IB MTU for UD (datagram) mode RDMA/nes: Fix adapter reset after PXE boot RDMA/nes: Print IPv4 addresses in a readable format RDMA/nes: Use print_mac() to format ethernet addresses for printing
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
... and isn't possible on sparc32 boxen anyway, unless somebody had done JavaStation with PCIE lately. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-