- 09 Dec, 2005 1 commit
-
-
Jack Morgenstein authored
Don't leak packet if it had a timeout, and don't leak timeout struct if queue_packet() fails. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
- 30 Nov, 2005 4 commits
-
-
Sean Hefty authored
Use an increasing local ID to avoid re-using identifiers while messages may still be outstanding on the old ID. Without this, a quick connect-disconnect-connect sequence can fail by matching messages for the new connection with the old connection. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Sean Hefty authored
Change reject code from TIMEOUT to CONSUMER_REJECT when destroying a cm_id in the process of connecting. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Jack Morgenstein authored
Unlike tavor, the max work queue size is an exact power of 2 for arbel mode, despite what the documentation (of the QUERY_DEV_LIM firmware command) says. Without this patch, on Arbel, we can start with a QP of a valid size and get above the reported limit after rounding to the next power of two. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Jack Morgenstein authored
uverbs needs to track which multicast groups is each qp attached to, in order to properly detach when cleanup is performed on device file close. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
- 29 Nov, 2005 7 commits
-
-
Michael S. Tsirkin authored
On mem-free HCAs, when posting a long list of send requests, a doorbell must be rung every 255 requests. Add code to handle this. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
If ipoib_ib_dev_up() fails after ipoib_ib_dev_open() is called, then ipoib_ib_dev_stop() needs to be called to clean up. Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Michael S. Tsirkin authored
race condition: ipoib_ib_dev_flush is accessing child list without locks. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
ipoib_mcast_alloc() uses kzalloc(), so there's no need to zero out members of the mcast struct after it's allocated. Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Michael S. Tsirkin authored
Make sure mcast->done is initialized to uncompleted value before we submit a new query, so that it's safe to wait on. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
Always set path->query to NULL when the SA path record query completes, rather than only when we don't have an address handle. Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
It's possible that IPoIB will issue multiple SA queries for the same path struct. Therefore the struct's completion needs to be initialized for each query rather than only once when the struct is allocated, or else we might not wait long enough for later queries to finish and free the path struct too soon. Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
- 28 Nov, 2005 5 commits
-
-
Michael S. Tsirkin authored
ib_umad_write in user_mad.c is looking at rmpp_hdr field in MAD before checking that the MAD actually has the RMPP header. So for a MAD without RMPP header it looks like we are actually checking a bit inside M_Key, or something. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Michael S. Tsirkin authored
last pointer is not updated when QP is modified to reset state. This causes data corruption if WQEs are already posted on the queue. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Adrian Bunk authored
The Coverity checker spotted this obvious NULL pointer dereference. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
The Coverity checker spotted this obvious use-after-release bug caused by a wrong order of the cleanups. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
The Coverity checker spotted this obvious NULL pointer dereference. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 26 Nov, 2005 1 commit
-
-
Linus Torvalds authored
-
- 25 Nov, 2005 17 commits
-
-
Trond Myklebust authored
In __rpc_purge_upcall (net/sunrpc/rpc_pipe.c), the newer code to clean up the in_upcall list has a typo. Thanks to Vince Busam <vbusam@google.com> for spotting this! Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
In cases where the server has gone insane, nfs_update_inode() may end up calling nfs_invalidate_inode(), which again calls stuff that takes the inode->i_lock that we're already holding. In addition, given the sort of things we have in NFS these days that need to be cleaned up on inode release, I'm not sure we should ever be calling make_bad_inode(). Fix up spinlock recursion, and limit nfs_invalidate_inode() to clearing the caches, and marking the inode as being stale. Thanks to Steve Dickson <SteveD@redhat.com> for spotting this. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
When caching locks due to holding a file delegation, we must always check against local locks before sending anything to the server. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
-
David Gibson authored
Blah. The patch [0] I recently sent fixing errors with in_hugepage_area() and prepare_hugepage_range() for powerpc itself has an off-by-one bug. Furthermore, the related functions touches_hugepage_*_range() and within_hugepage_*_range() are also buggy. Some of the bugs, like those addressed in [0] originated with commit 7d24f0b8 where we tweaked the semantics of where hugepages are allowed. Other bugs have been there essentially forever, and are due to the undefined behaviour of '<<' with shift counts greater than the type width (LOW_ESID_MASK could return non-zero for high ranges with the right congruences). The good news is that I now have a testsuite which should pick up things like this if they creep in again. [0] "powerpc-fix-for-hugepage-areas-straddling-4gb-boundary" Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
-
Stephen Rothwell authored
With the removal of include/asm-powerpc, we no longer need arch/powerpc/include/asm for the 64 bit build. We also do not need -Iarch/powerpc for the 64 bit build either. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Nathan Scott authored
SGI-PV: 946205 SGI-Modid: xfs-linux-melb:xfs-kern:24567a Signed-off-by: Nathan Scott <nathans@sgi.com>
-
Nathan Scott authored
SGI-PV: 941645 SGI-Modid: xfs-linux-melb:xfs-kern:24566a Signed-off-by: Nathan Scott <nathans@sgi.com>
-
Felix Blyakher authored
its queue of IO completion callbacks, thus creating the deadlock between umount and xfslogd. Breaking the loop solves the problem. SGI-PV: 943821 SGI-Modid: xfs-linux-melb:xfs-kern:202363a Signed-off-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
-
Nathan Scott authored
direct write. SGI-PV: 944820 SGI-Modid: xfs-linux-melb:xfs-kern:24351a Signed-off-by: Nathan Scott <nathans@sgi.com>
-
Christoph Hellwig authored
SGI-PV: 945483 SGI-Modid: xfs-linux-melb:xfs-kern:201884a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
-
Eric Sandeen authored
SGI-PV: 945311 SGI-Modid: xfs-linux-melb:xfs-kern:201708a Signed-off-by: Eric Sandeen <sandeen@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
-
Linus Torvalds authored
-
Jasper Spaans authored
This code fixes a tiny problem with the recent fbcon rotation changes: fb_prepare_logo doesn't check the return value of fb_find_logo and that causes a crash for my while booting. Obvious & working & tested fix is here. Signed-off-by: Jasper Spaans <jasper@vs19.net> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 24 Nov, 2005 5 commits
-
-
Dave Airlie authored
A fix for a locking bug which is triggered when a client tries to lock with flag DMA_QUIESCENT (typically the X server), but gets interrupted by a signal. The locking IOCTL should then return an error, but if DMA_QUIESCENT succeeds it returns 0, and the client falsely thinks it has the lock. In addition The client waits for DMA_QUISCENT and possibly DMA_READY without having the lock. From: Thomas Hellstrom Signed-off-by: Dave Airlie <airlied@linux.ie>
-
-
Nicolas Kaiser authored
remove redundant include Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Fix kernel-doc warning in linux/usb.h. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David Hrdeman authored
On Wed, Nov 16, 2005 at 06:34:24PM -0800, Pete Zaitcev wrote: >On Wed, 16 Nov 2005 23:52:32 +0100, David Hrdeman <david@2gen.com> wrote: >> usb-storage: waiting for device to settle before scanning >> Vendor: I0MEGA Model: UMni1GB*IOM2K4 Rev: 1.01 >> Type: Direct-Access ANSI SCSI revision: 02 >> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) >> sda: Write Protect is off >> sda: Mode Sense: 00 00 00 00 >> sda: assuming drive cache: write through >> ioctl_internal_command: <8 0 0 0> return code = 8000002 >> : Current: sense key=0x0 >> ASC=0x0 ASCQ=0x0 >> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) > >I think it's harmless. I saw things like that, and initially I plugged >them with workarounds like this: Thanks for the pointer, and yes, it is harmless, but it floods the console with the messages which hides other (potentially important) messages...following your example I've made a patch which fixes the problem. Signed-off-by: David Hrdeman <david@2gen.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-