- 01 Feb, 2006 40 commits
-
-
Bryan O'Sullivan authored
This assembly version is measurably faster than the generic version in lib/iomap_copy.c. Signed-off-by:
Bryan O'Sullivan <bos@pathscale.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Bryan O'Sullivan authored
This arch-independent routine copies data to a memory-mapped I/O region, using 32-bit accesses. The naming is double-underscored to make it clear that it does not guarantee write ordering, nor does it perform a memory barrier afterwards; the kernel doc also explicitly states this. This style of access is required by some devices. This change also introduces include/linux/io.h, at Andrew's suggestion. It only has one occupant at the moment, but is a logical destination for oft-replicated contents of include/asm-*/{io,iomap}.h to migrate to. Signed-off-by: -
Bryan O'Sullivan authored
This can make the intent behind some arithmetic expressions clearer. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
This function is neither used nor has any real contents. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
The expiry time for relative timers with SIGEV_NONE set was never updated to the correct value. Pointed out by George Anzinger. Signed-off-by:
-
Thomas Gleixner authored
At some point we added credits to people who actively helped to bring k/hr-timers along. This was lost in the big code revamp. Add it back. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
George Anzinger authored
Clean up the interface to hrtimers by changing the init code to pass the mode as well as the clock. This allow the init code to select the correct base and eliminates extra timer re-init code in posix-timers. We also simplify the restart interface nanosleep use. Signed-off-by:
George Anzinger <george@mvista.com> Signed-off-by:
-
akpm@osdl.org authored
From: Steven Rostedtrostedt@goodmis.org <rostedt@goodmis.org> CPU0 expires a posix-timer and runs the callback function. The signal is queued. After releasing the posix-timer lock and before returning to hrtimer_run_queue CPU0 gets interrupted. CPU1 delivers the queued signal and rearms the timer. CPU0 comes back to hrtimer_run_queue and sets the timer state to expired. The next modification of the timer can result in an oops, because the state information is wrong. Keep track of state = RUNNING and check if the state has been in the return path of hrtimer_run_queue. In case the state has been changed, ignore a restart request and do not touch the state variable. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Thomas Gleixner authored
This resolves bugzilla bug#5617. The oldvalue of the timer was read after the timer was cancelled, so the remaining time was always zero. Signed-off-by:
-
Thomas Gleixner authored
Fixup the conversion of posix-timers to hrtimers. Signed-off-by:
-
Thomas Gleixner authored
The itimer conversion removed the locking which protects the timer and variables in the shared signal structure. Steven Rostedt found the problem in the latest -rt patches. Signed-off-by:
-
Rafael J. Wysocki authored
Make swsusp use bytes as the image size units, which is needed for future compatibility. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Pekka Enberg authored
CC arch/um/sys-i386/ldt.o arch/um/sys-i386/ldt.c:19:21: proc_mm.h: No such file or directory make[1]: *** [arch/um/sys-i386/ldt.o] Error 1 Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Kylene Jo Hall authored
Remove event_data_size since it was pointed out in tpm_bios-indexing- fix.patch that is was ugly and it wasn't actually being used. Signed-off-by:
Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
-
Kylene Jo Hall authored
Fixing the sparse warnings on the acpi_os_map_memory calls pointed out by Randy. Signed-off-by:
-
Kylene Jo Hall authored
Attempting to insert the tpm modules fails because the tpm_bios file is missing a license statement. Signed-off-by:
-
Andrew Morton authored
It generates warnings: drivers/char/tpm/tpm_bios.c: In function `get_event_name': drivers/char/tpm/tpm_bios.c:223: warning: cast from pointer to integer of different size drivers/char/tpm/tpm_bios.c:223: warning: cast from pointer to integer of different size drivers/char/tpm/tpm_bios.c:223: warning: cast from pointer to integer of different size drivers/char/tpm/tpm_bios.c:224: warning: cast from pointer to integer of different size drivers/char/tpm/tpm_bios.c:224: warning: cast from pointer to integer of different size drivers/char/tpm/tpm_bios.c:224: warning: cast from pointer to integer of different size and I'm not sure what the code is doing there, but it seems wrong. We're using the address of the buffer rather than the contents of it. The patch adds more nasty typecasting, but I think the whole arrangement could be done in a more typesafe manner. Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by:
-
Andrew Morton authored
These functions return ERR_PTR()s on error, not NULL. Spotted by Randy. Cc: Serge Hallyn <serue@us.ibm.com> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Acked-by:
Greg KH <greg@kroah.com> Signed-off-by:
-
Randy Dunlap authored
tpm_bios.c needs securityfs_xyz() functions. Does include/linux/security.h need stubs for these, or should char/tpm/Makefile just be modified to say: ifdef CONFIG_ACPI ifdef CONFIG_SECURITY obj-$(CONFIG_TCG_TPM) += tpm_bios.o endif endif drivers/char/tpm/tpm_bios.c:494: warning: implicit declaration of function 'securityfs_create_dir' drivers/char/tpm/tpm_bios.c:494: warning: assignment makes pointer from integer without a cast drivers/char/tpm/tpm_bios.c:499: warning: implicit declaration of function 'securityfs_create_file' drivers/char/tpm/tpm_bios.c:501: warning: assignment makes pointer from integer without a cast drivers/char/tpm/tpm_bios.c:508: warning: assignment makes pointer from integer without a cast drivers/char/tpm/tpm_bios.c:523: warning: implicit declaration of function 'securityfs_remove' *** Warning: "securityfs_create_file" [drivers/char/tpm/tpm_bios.ko] undefined! *** Warning: "securityfs_create_dir" [drivers/char/tpm/tpm_bios.ko] undefined! *** Warning: "securityfs_remove" [drivers/char/tpm/tpm_bios.ko] undefined! There are also some gcc and sparse warnings that could be fixed. (see http://www.xenotime.net/linux/doc/build-tpm.out) Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by:
-
Randy Dunlap authored
drivers/char/tpm/tpm_infineon.c:443: warning: format '%04x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' Signed-off-by:
-
Rocky Craig authored
At the 2.6.12 timeframe ipmi_si_intf.c was patched to provide default register spacings in try_init_acpi() if the register spacing was set to zero, similar to code in other routines. Unfortunately, another patch was simultaneously added that exits early from try_init_acpi() if the register spacings are set to zero, circumventing the new defaults. This patch removes the early exit code and some incorrect comments that aren't present in other common code snippets. Signed-off-by:
Rocky Craig <rocky.craig@hp.com> Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
Alexey Dobriyan authored
priv->eeprom is a pointer. Signed-off-by:
Yi Zhu <yi.zhu@intel.com> Cc: James Ketrenos <jketreno@linux.intel.com> Signed-off-by:
-
Alexey Dobriyan authored
On alpha-jensen: CC drivers/base/platform.o In file included from include/linux/dma-mapping.h:24, from drivers/base/platform.c:16: include/asm/dma-mapping.h:36: warning: "struct scatterlist" declared inside parameter list include/asm/dma-mapping.h:36: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: -
Alasdair G Kergon authored
drivers/md/dm-table.c:500: warning: comparison of distinct pointer types lacks a cast Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Alasdair G Kergon authored
The snapshot and origin targets are incapable of handling barriers and need to indicate this. Signed-off-by:
-
Jun'ichi "Nick" Nomura authored
Record I/O timing statistics The start time is added to struct dm_io, an existing structure allocated privately internally within dm and attached to each incoming bio. We export disk_round_stats() from block/ll_rw_blk.c instead of creating a private clone. Signed-off-by:
Jun'ichi "Nick" Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
-
Kevin Corry authored
Record basic I/O statistics for mapped devices. Signed-off-by:
Kevin Corry <kevcorry@us.ibm.com> Signed-off-by:
-
Alasdair G Kergon authored
Reduce substantially the amount of code using PF_MEMALLOC, as envisaged in the original FIXME. If you're using lvm2, for this patch to work correctly you should update to lvm2 version 2.02.01 or later and device-mapper version 1.02.02 or later. Signed-off-by:
-
Patrick Caulfield authored
Clean up the code responsible for the on-disk mirror logs by using the set_le_bit test_le_bit functions of ext2. That makes the BE machines keep the bitmap internally in LE order - it does mean you can't use any other type of operations on the bitmap words but that looks to be OK in this instance. The efficiency tradeoff is very minimal as you would expect for something that ext2 uses. This allows us to remove bits_to_core(), bits_to_disk() and log->disk_bits. Also increment the mirror log disk version transparently to avoid sharing with older kernels that suffered from the 64-bit BE bug. Signed-off-by:
Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by:
-
Alasdair G Kergon authored
Move snapshot metadata loading to happen when the table is created instead of when the device is resumed. Writes to the origin device don't trigger exceptions until each snapshot table becomes active when resume() is called on each snapshot. If you're using lvm2, for this patch to work properly you should update to lvm2 version 2.02.01 or later and device-mapper version 1.02.02 or later. Signed-off-by:
-
Andrew Morton authored
fs/compat.c: In function `compat_sys_pselect7': fs/compat.c:1820: warning: passing arg 5 of `compat_core_sys_select' from incompatible pointer type Signed-off-by:
-
Alexey Dobriyan authored
It's not used. Fix the following on alpha-eb66 as a side effect: In file included from drivers/net/lp486e.c:75: include/asm/io.h:20:1: warning: "SLOW_DOWN_IO" redefined drivers/net/lp486e.c:59:1: warning: this is the location of the previous definition Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Ben Collins authored
Make the platform function interrupt functions actually work. Calls irq_enable() for the first in the list, and irq_disable() for the last. Added *func to struct irq_client so the the user can pass just that to pmf_unregister_irq_client(). Signed-off-by:
Ben Collins <bcollins@ubuntu.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Mikael Pettersson authored
Kernel 2.6.16-rc1 broke the ide-scsi driver: ide-scsi loads but fails to find any devices to bind to. It also triggers a message "Driver 'ide-scsi' needs updating - please use bus_type methods" from the driver core. The IDE core in 2.6.16-rc1 changed the location of an IDE driver's ->probe()/->remove()/->shutdown() methods: they are now in the ide_driver_t struct not in the gen_driver sub-struct. drivers/ide/ was updated for this change but ide-scsi.c wasn't. Hence the breakage. This patch repairs ide-scsi and also eliminates the driver core warning. Signed-off-by:
Mikael Pettersson <mikpe@csd.uu.se> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Acked-by:
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
Ashok Raj authored
__meminit has overzelously been modified and crept its way into marking cpuup callbacks as __meminit. Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
In 2.6.16-rc1 there is a small typo introduced by the 'Remove device_node addrs/n_addr' changes which prevents my Powerbook G4 sound from working: Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC). snd: can't request rsrc 0 (Sound Control: 0x80000000:80004fff) ALSA device list: No soundcards found. The patch below fixes it. Of course, the patch fixing the i2c issues ('i2c_smbus_write_i2c_block_data' patch) needs to be applied to in order for the sound to completly work. Signed-off-by:Stelian Pop <stelian@popies.net> Signed-off-by:
-
Miklos Szeredi authored
While asynchronous reads mean a performance improvement in most cases, if the filesystem assumed that reads are synchronous, then async reads may degrade performance (filesystem may receive reads out of order, which can confuse it's own readahead logic). With sshfs a 1.5 to 4 times slowdown can be measured. There's also a need for userspace filesystems to know whether asynchronous reads are supported by the kernel or not. To achive these, negotiate in the INIT request whether async reads will be used and the maximum readahead value. Update interface version to 7.6 If userspace uses a version earlier than 7.6, then disable async reads, and set maximum readahead value to the maximum read size, as done in previous versions. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Andrew Morton authored
An old patch designed to fix http://bugme.osdl.org/show_bug.cgi?id=4497, "getdents gives empty/random result upon signal". If smbfs's readdir() is interupted by a signal, smb_readdir() failed to noticed that and proceeded to treat the unread-into page as valid directory contents. Fix that up by handling the -ERESTARTSYS. Thanks to Stian Skjelstad for reporting and testing. Cc: Stian Skjelstad <stian@nixia.no> Signed-off-by:
-
