- 23 Jul, 2020 17 commits
-
-
Leonardo Bras authored
On PAPR+ the hcall() on 0x1B0 is called H_DISABLE_AND_GET, but got defined as H_DISABLE_AND_GETC instead. This define was introduced with a typo in commit <b13a96cf> ("[PATCH] powerpc: Extends HCALL interface for InfiniBand usage"), and was later used without having the typo noticed. Signed-off-by:
Leonardo Bras <leobras.c@gmail.com> Acked-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200707004812.190765-1-leobras.c@gmail.com
-
Christoph Hellwig authored
Both the ->dump method and snprintf return an int. So switch to an int and properly handle errors from ->dump. Fixes: 5456ffde ("powerpc/spufs: simplify spufs core dumping") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Nicholas Piggin authored
Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Wen Xiong authored
Several device drivers hit EEH(Extended Error handling) when triggering kdump on Pseries PowerVM. This patch implemented a reset of the PHBs in pci general code when triggering kdump. PHB reset stop all PCI transactions from normal kernel. We have tested the patch in several enviroments: - direct slot adapters - adapters under the switch - a VF adapter in PowerVM - a VF adapter/adapter in KVM guest. Signed-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> [mpe: Fix broken whitespace, subject & SOB formatting] Signed-off-by:
-
Nicholas Piggin authored
powerpc return from interrupt and return from system call sequences are context synchronising. Signed-off-by:
-
Palmer Dabbelt authored
This primitive has been renamed, but because it was spelled incorrectly in the first place it must have escaped the fixup patch. As far as I can tell this logic is still correct: smp_mb__after_spinlock() uses the default smp_mb() implementation, which is "sync" rather than "hwsync" but those are the same (though I'm not that familiar with PowerPC). Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by:
-
Balamuruhan S authored
fix checkpatch.pl warnings by moving extern declaration from source file to headerfile. Signed-off-by:
Balamuruhan S <bala24@linux.ibm.com> Signed-off-by:
-
Balamuruhan S authored
retrieve prefix instruction operands RA and pc relative bit R values using macros and adopt it in sstep.c and test_emulate_step.c. Signed-off-by:
-
Balamuruhan S authored
testcases for `paddi` instruction to cover the negative case, if R is equal to 1 and RA is not equal to 0, the instruction form is invalid. Signed-off-by:
-
Balamuruhan S authored
add provision to declare test is a negative scenario, verify whether emulation fails and avoid executing it. Signed-off-by:
-
Jordan Niethe authored
Currently prefixed instructions are dumped as two separate word instructions. Use mread_instr() so that prefixed instructions are read as such and update the incrementor in the loop to take this into account. 'dump_func' is print_insn_powerpc() which comes from ppc-dis.c which is taken from binutils. When this is updated prefixed instructions will be disassembled. Currently dumping prefixed instructions looks like this: 0:mon> di c000000000094168 c000000000094168 0x06000000 .long 0x6000000 c00000000009416c 0x392a0003 addi r9,r10,3 c000000000094170 0x913f0028 stw r9,40(r31) c000000000094174 0xe93f002a lwa r9,40(r31) c000000000094178 0x7d234b78 mr r3,r9 c00000000009417c 0x383f0040 addi r1,r31,64 c000000000094180 0xebe1fff8 ld r31,-8(r1) c000000000094184 0x4e800020 blr c000000000094188 0x60000000 nop ... c000000000094190 0x3c4c0121 addis r2,r12,289 c000000000094194 0x38429670 addi r2,r2,-27024 c000000000094198 0x7c0802a6 mflr r0 c00000000009419c 0x60000000 nop c0000000000941a0 0xe9240100 ld r9,256(r4) c0000000000941a4 0x39400001 li r10,1 After this it looks like: 0:mon> di c000000000094168 c000000000094168 0x06000000 0x392a0003 .long 0x392a000306000000 c000000000094170 0x913f0028 stw r9,40(r31) c000000000094174 0xe93f002a lwa r9,40(r31) c000000000094178 0x7d234b78 mr r3,r9 c00000000009417c 0x383f0040 addi r1,r31,64 c000000000094180 0xebe1fff8 ld r31,-8(r1) c000000000094184 0x4e800020 blr c000000000094188 0x60000000 nop ... c000000000094190 0x3c4c0121 addis r2,r12,289 c000000000094194 0x38429570 addi r2,r2,-27280 c000000000094198 0x7c0802a6 mflr r0 c00000000009419c 0x60000000 nop c0000000000941a0 0xe9240100 ld r9,256(r4) c0000000000941a4 0x39400001 li r10,1 c0000000000941a8 0x3d02000b addis r8,r2,11 Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Signed-off-by:
-
Jordan Niethe authored
There are quite a few places where instructions are printed, this is done using a '%x' format specifier. With the introduction of prefixed instructions, this does not work well. Currently in these places, ppc_inst_val() is used for the value for %x so only the first word of prefixed instructions are printed. When the instructions are word instructions, only a single word should be printed. For prefixed instructions both the prefix and suffix should be printed. To accommodate both of these situations, instead of a '%x' specifier use '%s' and introduce a helper, __ppc_inst_as_str() which returns a char *. The char * __ppc_inst_as_str() returns is buffer that is passed to it by the caller. It is cumbersome to require every caller of __ppc_inst_as_str() to now declare a buffer. To make it more convenient to use __ppc_inst_as_str(), wrap it in a macro that uses a compound statement to allocate a buffer on the caller's stack before calling it. Signed-off-by:
Joel Stanley <joel@jms.id.au> Acked-by:
Segher Boessenkool <segher@kernel.crashing.org> [mpe: Drop 0x prefix to match most existings uses, especially xmon] Signed-off-by:
-
Jordan Niethe authored
Use the existing support for testing compute type instructions to test Prefixed Add Immediate (paddi). The R bit of the paddi instruction controls whether current instruction address is used. Add test cases for when R=1 and for R=0. paddi has a 34 bit immediate field formed by concatenating si0 and si1. Add tests for the extreme values of this field. Skip the paddi tests if ISA v3.1 is unsupported. Some of these test cases were added by Balamuruhan S. Signed-off-by:
-
Jordan Niethe authored
An a array of struct compute_test's are used to declare tests for compute instructions. Add a cpu_feature field to struct compute_test as an optional way to specify a cpu feature that must be present. If not present then skip the test. Signed-off-by:
-
Jordan Niethe authored
The tests for emulation of compute instructions execute and emulate an instruction and then compare the results to verify the emulation. In ISA v3.1 there are instructions that operate relative to the NIP. Therefore set the NIP in the regs used for the emulated instruction to the location of the executed instruction so they will give the same result. This is a rework of a patch by Balamuruhan S. Signed-off-by:
-
Jordan Niethe authored
Add tests for the prefixed versions of the floating-point load/stores that are currently tested. This includes the following instructions: * Prefixed Load Floating-Point Single (plfs) * Prefixed Load Floating-Point Double (plfd) * Prefixed Store Floating-Point Single (pstfs) * Prefixed Store Floating-Point Double (pstfd) Skip the new tests if ISA v3.10 is unsupported. Signed-off-by:
-
Jordan Niethe authored
Add tests for the prefixed versions of the integer load/stores that are currently tested. This includes the following instructions: * Prefixed Load Doubleword (pld) * Prefixed Load Word and Zero (plwz) * Prefixed Store Doubleword (pstd) Skip the new tests if ISA v3.1 is unsupported. Signed-off-by:
-
- 22 Jul, 2020 10 commits
-
-
Athira Rajeev authored
PowerISA v3.1 has few updates for the Branch History Rolling Buffer(BHRB). BHRB disable is controlled via Monitor Mode Control Register A (MMCRA) bit, namely "BHRB Recording Disable (BHRBRD)". This field controls whether BHRB entries are written when BHRB recording is enabled by other bits. This patch implements support for this BHRB disable bit. By setting 0b1 to this bit will disable the BHRB and by setting 0b0 to this bit will have BHRB enabled. This addresses backward compatibility (for older OS), since this bit will be cleared and hardware will be writing to BHRB by default. This patch addresses changes to set MMCRA (BHRBRD) at boot for power10 (there by the core will run faster) and enable this feature only on runtime ie, on explicit need from user. Also save/restore MMCRA in the restore path of state-loss idle state to make sure we keep BHRB disabled if it was not enabled on request at runtime. Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by:
-
Athira Rajeev authored
PowerISA v3.1 introduce filtering support for PERF_SAMPLE_BRANCH_IND_CALL/COND. The patch adds BHRB filter support for "ind_call" and "cond" in power10_bhrb_filter_map(). Signed-off-by:
-
Athira Rajeev authored
Commit bb19af81 ("powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer") added a check in bhrb_read() to filter the kernel address from BHRB buffer. This patch modified it to avoid that check for PowerISA v3.1 based processors, since PowerISA v3.1 allows only MSR[PR]=1 address to be written to BHRB buffer. Signed-off-by:
-
Athira Rajeev authored
Base enablement patch to register performance monitoring hardware support for power10. Patch introduce the raw event encoding format, defines the supported list of events, config fields for the event attributes and their corresponding bit values which are exported via sysfs. Patch also enhances the support function in isa207_common.c to include power10 pmu hardware. Reported-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
-
Madhavan Srinivasan authored
Add Power10 feature function to DT CPU features, along with a Power10 specific init() to initialize PMU SPRs, sets the oprofile_cpu_type and cpu_features. This will enable performance monitoring unit (PMU) for Power10 in CPU features with "performance-monitor-power10". For Power ISA v3.1, BHRB disable is controlled via Monitor Mode Control Register A (MMCRA) bit, namely "BHRB Recording Disable (BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB feature at boot for Power10. Signed-off-by:
-
Madhavan Srinivasan authored
PowerISA v3.1 added three new perfromance monitoring unit (PMU) speical purpose register (SPR). They are Monitor Mode Control Register 3 (MMCR3), Sampled Instruction Event Register 2 (SIER2), Sampled Instruction Event Register 3 (SIER3). Patch here adds a new dump function dump_310_sprs to print these SPR values. Signed-off-by:
-
Athira Rajeev authored
Power ISA v3.1 has added new performance monitoring unit (PMU) special purpose registers (SPRs). They are: Monitor Mode Control Register 3 (MMCR3) Sampled Instruction Event Register A (SIER2) Sampled Instruction Event Register B (SIER3) Add support to save/restore these new SPRs while entering/exiting guest. Also include changes to support KVM_REG_PPC_MMCR3/SIER2/SIER3. Add new SPRs to KVM API documentation. Signed-off-by:
-
Madhavan Srinivasan authored
PowerISA v3.1 includes new performance monitoring unit(PMU) special purpose registers (SPRs). They are Monitor Mode Control Register 3 (MMCR3) Sampled Instruction Event Register 2 (SIER2) Sampled Instruction Event Register 3 (SIER3) MMCR3 is added for further sampling related configuration control. SIER2/SIER3 are added to provide additional information about the sampled instruction. Patch adds new PPMU flag called "PPMU_ARCH_31" to support handling of these new SPRs, updates the struct thread_struct to include these new SPRs, include MMCR3 in struct mmcr_regs. This is needed to support programming of MMCR3 SPR during event_enable/disable. Patch also adds the sysfs support for the MMCR3 SPR along with SPRN_ macros for these new pmu SPRs. Signed-off-by:
-
Athira Rajeev authored
Events of type PERF_TYPE_HW_CACHE was described for Power PMU as: int (*cache_events)[type][op][result]; where type, op, result values unpacked from the event attribute config value is used to generate the raw event code at runtime. So far the event code values which used to create these cache-related events were within 32 bit and `int` type worked. In power10, some of the event codes are of 64-bit value and hence update the Power PMU cache_events to `u64` type in `power_pmu` struct. Also propagate this change to existing all PMU driver code paths which are using ppmu->cache_events. Signed-off-by:
-
Athira Rajeev authored
Currently `kvm_vcpu_arch` stores all Monitor Mode Control registers in a flat array in order: mmcr0, mmcr1, mmcra, mmcr2, mmcrs Split this to give mmcra and mmcrs its own entries in vcpu and use a flat array for mmcr0 to mmcr2. This patch implements this cleanup to make code easier to read. Signed-off-by:
-
- 21 Jul, 2020 13 commits
-
-
Athira Rajeev authored
core-book3s currently uses array to store the MMCR registers as part of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct` to store mmcr regs instead of array. This will make code easier to read and reduces chance of any subtle bug that may come in the future, say when new registers are added. Patch updates all relevant code that was using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`. This includes the PMU driver code for supported platforms (power5 to power9) and ISA macros for counter support functions. Signed-off-by:
-
Madhavan Srinivasan authored
Compilation error: arch/powerpc/perf/perf_regs.c:80:undefined reference to `.is_sier_available' Currently is_sier_available() is part of core-book3s.c, which is added to build based on CONFIG_PPC_PERF_CTRS. A config with CONFIG_PERF_EVENTS and without CONFIG_PPC_PERF_CTRS will have a build break because of missing is_sier_available(). In practice it only breaks when CONFIG_FSL_EMB_PERF_EVENT=n because that also guards the usage of is_sier_available(). That only happens with CONFIG_PPC_BOOK3E_64=y and CONFIG_FSL_SOC_BOOKE=n. Patch adds is_sier_available() in asm/perf_event.h to fix the build break for configs missing CONFIG_PPC_PERF_CTRS. Fixes: 333804dc ("powerpc/perf: Update perf_regs structure to include SIER") Reported-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
The subpage_prot syscall was added for specialised system software (Lx86) that has been discontinued for about 7 years, and is not thought to be used elsewhere, so disable it by default. Signed-off-by:
-
Nicholas Piggin authored
ISA v3.1 does not support the SAO storage control attribute required to implement PROT_SAO. PROT_SAO was used by specialised system software (Lx86) that has been discontinued for about 7 years, and is not thought to be used elsewhere, so removal should not cause problems. We rather remove it than keep support for older processors, because live migrating guest partitions to newer processors may not be possible if SAO is in use (or worse allowed with silent races). - PROT_SAO stays in the uapi header so code using it would still build. - arch_validate_prot() is removed, the generic version rejects PROT_SAO so applications would get a failure at mmap() time. Signed-off-by:
-
Nicholas Piggin authored
This comment is wrong, we wouldn't use calc_vm_prot_bits() here because we are being called by calc_vm_prot_bits() to modify its behaviour. Signed-off-by:
-
YueHaibing authored
Both of those functions are only called from 64-bit only code, so the stubs should not be needed at all. Suggested-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Michael Ellerman authored
Currently the spu coredump code triggers an RCU warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc3-01755-g7cd49f0b7ec7 #1 Not tainted ----------------------------- include/linux/fdtable.h:95 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by spu-coredump/1343: #0: c0000007fa22f430 (sb_writers#2){.+.+}-{0:0}, at: .do_coredump+0x1010/0x13c8 stack backtrace: CPU: 0 PID: 1343 Comm: spu-coredump Not tainted 5.7.0-rc3-01755-g7cd49f0b7ec7 #1 Call Trace: .dump_stack+0xec/0x15c (unreliable) .lockdep_rcu_suspicious+0x120/0x144 .coredump_next_context+0x148/0x158 .spufs_coredump_extra_notes_size+0x54/0x190 .elf_coredump_extra_notes_size+0x34/0x50 .elf_core_dump+0xe48/0x19d0 .do_coredump+0xe50/0x13c8 .get_signal+0x864/0xd88 .do_notify_resume+0x158/0x3c8 .interrupt_exit_user_prepare+0x19c/0x208 interrupt_return+0x14/0x1c0 This comes from fcheck_files() via fcheck(). It's pretty clearly documented that fcheck() must be wrapped with rcu_read_lock(), adding that fixes the RCU warning. hch points out that once we've released the RCU read lock the file may be closed and freed, which would leave us with a pointer to a freed spu_context. To avoid that, take a reference to the spu_context while we hold the RCU read lock, and drop that reference later once we're done with the context. Signed-off-by: -
Michael Ellerman authored
The per_event_excludes test wants to run on Power8 or later. But currently it checks that AT_BASE_PLATFORM *equals* power8, which means it only runs on Power8. Fix it to check for the ISA 2.07 feature, which will be set on Power8 and later CPUs. Signed-off-by:
-
Aneesh Kumar K.V authored
There is only one caller to this function and the function is wrongly named. Avoid further confusion w.r.t name and open code this at the only call site. Also remove read_uamor(). There are no users for the same after this. Signed-off-by:
-
Aneesh Kumar K.V authored
With commit 4a4a5e5d ("powerpc/pkeys: key allocation/deallocation must not change pkey registers") we are not updating UAMOR on key allocation. So don't update the expected uamor value in the test. Fixes: 4a4a5e5d ("powerpc/pkeys: key allocation/deallocation must not change pkey registers") Signed-off-by:
-
