- 24 Sep, 2012 2 commits
-
-
Arnaldo Carvalho de Melo authored
Following the model of 'perf sched': . raw_field_value searches first on the common fields, that are unused in this tool . Using perf_session__set_tracepoints_handlers will save all those strcmp to find the right handler at sample processing time, do it just once and get the handler from evsel->handler.func. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Using plain raw_field_value(evsel->tp_format) will look at the common fields as well, and since this tool doesn't need those, speed it up a bit by looking at just the event specific fields. Also in general use just evsel and sample, just like was done in 'perf sched'. v2: Fixed up test against evsel->name, that contains the subsys name too, by David Ahern. Cc: David Ahern <dsahern@gmail.com> Cc: Dong Hao <haodong@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.orgSigned-off-by:
-
- 21 Sep, 2012 3 commits
-
-
Xiao Guangrong authored
Add 'perf kvm stat' support to analyze kvm vmexit/mmio/ioport smartly Usage: - kvm stat run a command and gather performance counter statistics, it is the alias of perf stat - trace kvm events: perf kvm stat record, or, if other tracepoints are interesting as well, we can append the events like this: perf kvm stat record -e timer:* -a If many guests are running, we can track the specified guest by using -p or --pid, -a is used to track events generated by all guests. - show the result: perf kvm stat report The output example is following: 13005 13059 total 2 guests are running on the host Then, track the guest whose pid is 13059: ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.253 MB perf.data.guest (~11065 samples) ] See the vmexit events: Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Avg time APIC_ACCESS 460 70.55% 0.01% 22.44us ( +- 1.75% ) HLT 93 14.26% 99.98% 832077.26us ( +- 10.42% ) EXTERNAL_INTERRUPT 64 9.82% 0.00% 35.35us ( +- 14.21% ) PENDING_INTERRUPT 24 3.68% 0.00% 9.29us ( +- 31.39% ) CR_ACCESS 7 1.07% 0.00% 8.12us ( +- 5.76% ) IO_INSTRUCTION 3 0.46% 0.00% 18.00us ( +- 11.79% ) EXCEPTION_NMI 1 0.15% 0.00% 5.83us ( +- -nan% ) Total Samples:652, Total events handled time:77396109.80us. See the mmio events: Analyze events for all VCPUs: MMIO Access Samples Samples% Time% Avg time 0xfee00380:W 387 84.31% 79.28% 8.29us ( +- 3.32% ) 0xfee00300:W 24 5.23% 9.96% 16.79us ( +- 1.97% ) 0xfee00300:R 24 5.23% 7.83% 13.20us ( +- 3.00% ) 0xfee00310:W 24 5.23% 2.93% 4.94us ( +- 3.84% ) Total Samples:459, Total events handled time:4044.59us. See the ioport event: Analyze events for all VCPUs: IO Port Access Samples Samples% Time% Avg time 0xc050:POUT 3 100.00% 100.00% 13.75us ( +- 10.83% ) Total Samples:3, Total events handled time:41.26us. And, --vcpu is used to track the specified vcpu and --key is used to sort the result: Analyze events for VCPU 0: VM-EXIT Samples Samples% Time% Avg time HLT 27 13.85% 99.97% 405790.24us ( +- 12.70% ) EXTERNAL_INTERRUPT 13 6.67% 0.00% 27.94us ( +- 22.26% ) APIC_ACCESS 146 74.87% 0.03% 21.69us ( +- 2.91% ) IO_INSTRUCTION 2 1.03% 0.00% 17.77us ( +- 20.56% ) CR_ACCESS 2 1.03% 0.00% 8.55us ( +- 6.47% ) PENDING_INTERRUPT 5 2.56% 0.00% 6.27us ( +- 3.94% ) Total Samples:195, Total events handled time:10959950.90us. Signed-off-by:Dong Hao <haodong@linux.vnet.ibm.com> Signed-off-by:
Runzhen Wang <runzhen@linux.vnet.ibm.com> [ Dong Hao <haodong@linux.vnet.ibm.com> Runzhen Wang <runzhen@linux.vnet.ibm.com>: - rebase it on current acme's tree - fix the compiling-error on i386 ] Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Acked-by:
David Ahern <dsahern@gmail.com> Cc: Avi Kivity <avi@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: kvm@vger.kernel.org Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1347870675-31495-4-git-send-email-haodong@linux.vnet.ibm.comSigned-off-by:
-
Xiao Guangrong authored
Exporting KVM exit information to userspace to be consumed by perf. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: kvm@vger.kernel.org Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1347870675-31495-2-git-send-email-haodong@linux.vnet.ibm.comSigned-off-by:
-
Eric Sandeen authored
Parallel builds of perf were failing for me on a 32p box, with: * new build flags or prefix util/pmu.l:7:23: error: pmu-bison.h: No such file or directory ... make: *** [util/pmu-flex.o] Error 1 make: *** Waiting for unfinished jobs.... This can pretty quickly be seen by adding a sleep in front of the bison calls in tools/perf/Makefile and running make -j4 on a smaller box i.e.: sleep 10; $(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c Adding the following dependencies fixes it for me. Signed-off-by:Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Namhyung Kim <namhyung@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/505BD190.40707@redhat.comSigned-off-by:
-
- 20 Sep, 2012 3 commits
-
-
Stephane Eranian authored
Got tired of not getting the event that caused the perf_event_open() syscall to fail. So I fixed the error message. This is very useful when monitoring lots of events in a single run. Signed-off-by:
Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120920161945.GA7064@quadSigned-off-by:
-
Feng Tang authored
This patch fix a compile warning taken as error: CC util/map.o cc1: warnings being treated as errors util/map.c: In function ‘map__fprintf_dsoname’: util/map.c:240: error: ‘dsoname’ may be used uninitialized in this function make: *** [util/map.o] Error 1 Signed-off-by:
Feng Tang <feng.tang@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346053107-11946-3-git-send-email-feng.tang@intel.comSigned-off-by:
-
Feng Tang authored
On my x86_32 mahcine, there is a compile error: CC util/scripting-engines/trace-event-perl.o cc1: warnings being treated as errors util/scripting-engines/trace-event-perl.c: In function perl_process_tracepoint: util/scripting-engines/trace-event-perl.c:285: error: format expects type 'int', but argument 2 has type '__u64' make: *** [util/scripting-engines/trace-event-perl.o] Error 1 Fix it by using the "%PRIu64" for __u64. v2: use PRIu64 as suggested by Arnaldo. Signed-off-by:
-
- 19 Sep, 2012 3 commits
-
-
Dan Carpenter authored
The test should be >= ARRAY_SIZE() instead of > ARRAY_SIZE(). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/20120905123126.GC6128@elgon.mountainSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core Pull uprobes fixes + cleanups from Oleg Nesterov. Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: * Fix handling of unresolved samples when --symbols is used in 'report', from Feng Tang. * Add --symbols to 'script', similar to the one in 'report', from Feng Tang. * Add union member access support to 'probe', from Hyeoncheol Lee. * Make 'archive' work on Android, tweaking some of the utility parameters used (tar, rm), from Irina Tirdea. * Fixups to die() removal, from Namhyung Kim. * Render fixes for the TUI, from Namhyung Kim. * Don't enable annotation in non symbolic view, from Namhyung Kim. * Fix pipe mode in 'report', from Namhyung Kim. * Move related stats code from stat to util/, will be used by the 'stat' kvm tool, from Xiao Guangrong. * Add cpumask for uncore pmu, use it in 'stat', from Yan, Zheng. Signed-off-by:
-
- 17 Sep, 2012 12 commits
-
-
Yan, Zheng authored
If user doesn't explicitly specify CPU list, perf-stat only collects events on CPUs listed in the PMU cpumask file. Signed-off-by:
"Yah, Zheng" <zheng.z.yan@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1347263631-23175-3-git-send-email-zheng.z.yan@intel.comSigned-off-by:
-
Yan, Zheng authored
This patch adds a cpumask file to the uncore pmu sysfs directory. The cpumask file contains one active cpu for every socket. Signed-off-by:
-
Namhyung Kim authored
The perf_hpp__init() function was only called from setup_browser() so that the pipe-mode missed the initialization thus didn't respond to related options. Fix it. Reported-by:
Robert Richter <robert.richter@amd.com> Tested-by:
-
Feng Tang authored
So that other perf commands/browser has a way to dig out the available scripts info in system, this is a preparation for the script browser. Signed-off-by:
-
Feng Tang authored
So that event_analyzing_sample.py can be shown by "perf script -l" Signed-off-by:
-
Feng Tang authored
Since perf script no longer only handle the trace points, we can add the symbol filter option so that scripts can handle specified samples. Signed-off-by:
-
Feng Tang authored
Report/top commands support to only handle specific symbols with "--symbols" option, but current code will keep those samples whose symbol can't be resolved, which should actually be filtered. If we run following commands: $perf record -a tree $perf report --symbols intel_idle -n the output will be: Without the patch: ================== 46.27% 156 sshd [unknown] 26.05% 48 swapper [kernel.kallsyms] 17.26% 38 tree libc-2.12.1.so 7.69% 17 tree tree 2.73% 6 tree ld-2.12.1.so With the patch: =============== 100.00% 48 swapper [kernel.kallsyms] Signed-off-by: -
Irina Tirdea authored
On some systems, tar needs to specify the name of the archive immediately after the -f parameter. Change the order of the parameters so tar can run properly. Signed-off-by:
Irina Tirdea <irina.tirdea@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347574063-22521-5-git-send-email-irina.tirdea@intel.comSigned-off-by:
-
Irina Tirdea authored
In Android, rm does not support the -f parameter. Remove -f from rm and make sure rm does not fail even if the files to be removed are not found. Signed-off-by:
-
Xiao Guangrong authored
Then, the code can be shared between kvm events and perf stat. Signed-off-by:
-
Namhyung Kim authored
The integrated annotation feature is supported only in TUI mode. Also it should be enabled with 'symbol' sort key otherwise resulting hist entry doesn't need to have same symbol as of a sample so that it can fail on hist_entry__inc_addr_samples with -ERANGE. You can easily see it when start perf report TUI without symbol* sort key. This patch fixes the problem. Signed-off-by:
-
Namhyung Kim authored
The sort__has_sym variable is for checking whether the sort_list includes 'symbol' as a sort key. It will be used for later patch. Signed-off-by:
-
- 15 Sep, 2012 12 commits
-
-
Oleg Nesterov authored
Make arch_uprobe_task->saved_trap_nr "unsigned int" and move it down after ->saved_scratch_register, this changes sizeof() from 24 to 16. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com>
-
Oleg Nesterov authored
arch_uprobe_disable_step() should also take UTASK_SSTEP_TRAPPED into account. In this case the probed insn was not executed, we need to clear X86_EFLAGS_TF if it was set by us and that is all. Again, this code will look more clean when we move it into arch_uprobe_post_xol() and arch_uprobe_abort_xol(). Signed-off-by:
-
Oleg Nesterov authored
arch_uprobe_disable_step() correctly preserves X86_EFLAGS_TF and returns to user-mode. But this means the application gets SIGTRAP only after the next insn. This means that UPROBE_CLEAR_TF logic is not really right. _enable should only record the state of X86_EFLAGS_TF, and _disable should check it separately from UPROBE_FIX_SETF. Remove arch_uprobe_task->restore_flags, add ->saved_tf instead, and change enable/disable accordingly. This assumes that the probed insn was not trapped, see the next patch. arch_uprobe_skip_sstep() logic has the same problem, change it to check X86_EFLAGS_TF and send SIGTRAP as well. We will cleanup this all after we fold enable/disable_step into pre/post_hol hooks. Note: send_sig(SIGTRAP) is not actually right, we need send_sigtrap(). But this needs more changes, handle_swbp() does the same and this is equally wrong. Signed-off-by:
-
Oleg Nesterov authored
user_enable/disable_single_step() was designed for ptrace, it assumes a single user and does unnecessary and wrong things for uprobes. For example: - arch_uprobe_enable_step() can't trust TIF_SINGLESTEP, an application itself can set X86_EFLAGS_TF which must be preserved after arch_uprobe_disable_step(). - we do not want to set TIF_SINGLESTEP/TIF_FORCED_TF in arch_uprobe_enable_step(), this only makes sense for ptrace. - otoh we leak TIF_SINGLESTEP if arch_uprobe_disable_step() doesn't do user_disable_single_step(), the application will be killed after the next syscall. - arch_uprobe_enable_step() does access_process_vm() we do not need/want. Change arch_uprobe_enable/disable_step() to set/clear X86_EFLAGS_TF directly, this is much simpler and more correct. However, we need to clear TIF_BLOCKSTEP/DEBUGCTLMSR_BTF before executing the probed insn, add set_task_blockstep(false). Note: with or without this patch, there is another (hopefully minor) problem. A probed "pushf" insn can see the wrong X86_EFLAGS_TF set by uprobes. Perhaps we should change _disable to update the stack, or teach arch_uprobe_skip_sstep() to emulate this insn. Signed-off-by:
-
Oleg Nesterov authored
Afaics the usage of update_debugctlmsr() and TIF_BLOCKSTEP in step.c was always very wrong. 1. update_debugctlmsr() was simply unneeded. The child sleeps TASK_TRACED, __switch_to_xtra(next_p => child) should notice TIF_BLOCKSTEP and set/clear DEBUGCTLMSR_BTF after resume if needed. 2. It is wrong. The state of DEBUGCTLMSR_BTF bit in CPU register should always match the state of current's TIF_BLOCKSTEP bit. 3. Even get_debugctlmsr() + update_debugctlmsr() itself does not look right. Irq can change other bits in MSR_IA32_DEBUGCTLMSR register or the caller can be preempted in between. 4. It is not safe to play with TIF_BLOCKSTEP if task != current. DEBUGCTLMSR_BTF and TIF_BLOCKSTEP should always match each other if the task is running. The tracee is stopped but it can be SIGKILL'ed right before set/clear_tsk_thread_flag(). However, now that uprobes uses user_enable_single_step(current) we can't simply remove update_debugctlmsr(). So this patch adds the additional "task == current" check and disables irqs to avoid the race with interrupts/preemption. Unfortunately this patch doesn't solve the last problem, we need another fix. Probably we should teach ptrace_stop() to set/clear single/block stepping after resume. And afaics there is yet another problem: perf can play with MSR_IA32_DEBUGCTLMSR from nmi, this obviously means that even __switch_to_xtra() has problems. Signed-off-by: -
Oleg Nesterov authored
No functional changes, preparation for the next fix and for uprobes single-step fixes. Move the code playing with TIF_BLOCKSTEP/DEBUGCTLMSR_BTF into the new helper, set_task_blockstep(). Signed-off-by:
-
Sebastian Andrzej Siewior authored
The arch specific implementation behaves like user_enable_single_step() except that it does not disable single stepping if it was already enabled by ptrace. This allows the debugger to single step over an uprobe. The state of block stepping is not restored. It makes only sense together with TF and if that was enabled then the debugger is notified. Note: this is still not correct. For example, TIF_SINGLESTEP check is not right, the application itself can set X86_EFLAGS_TF. And otoh we leak TIF_SINGLESTEP (set by enable) if the probed insn is "popf". See the next patches, we need the changes in arch/x86/kernel/step.c first. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
As Oleg pointed out in [0] uprobe should not use the ptrace interface for enabling/disabling single stepping. [0] http://lkml.kernel.org/r/20120730141638.GA5306@redhat.com Add the new "__weak arch" helpers which simply call user_*_single_step() as a preparation. This is only needed to not break the powerpc port, we will fold this logic into arch_uprobe_pre/post_xol() hooks later. We should also change handle_singlestep(), _disable_step(&uprobe->arch) should be called before put_uprobe(). Signed-off-by:
-
Oleg Nesterov authored
The wrong MMF_HAS_UPROBES doesn't really hurt, just it triggers the "slow" and unnecessary handle_swbp() path if the task hits the non-uprobe breakpoint. So this patch changes find_active_uprobe() to check every valid vma and clear MMF_HAS_UPROBES if no uprobes were found. This is adds the slow O(n) path, but it is only called in unlikely case when the task hits the normal breakpoint first time after uprobe_unregister(). Note the "not strictly accurate" comment in mmf_recalc_uprobes(). We can fix this, we only need to teach vma_has_uprobes() to return a bit more more info, but I am not sure this worth the trouble. Signed-off-by:
-
Oleg Nesterov authored
Add the new MMF_RECALC_UPROBES flag, it means that MMF_HAS_UPROBES can be false positive after remove_breakpoint() or uprobe_munmap(). It is also set by uprobe_dup_mmap(), this is not optimal but simple. We could add the new hook, uprobe_dup_vma(), to set MMF_HAS_UPROBES only if the new mm actually has uprobes, but I don't think this makes sense. The next patch will use this flag to clear MMF_HAS_UPROBES. Signed-off-by:
-
Oleg Nesterov authored
Nobody plays with uprobes_tree/uprobes_treelock in interrupt context, no need to disable irqs. Signed-off-by:
-
Sebastian Andrzej Siewior authored
alloc_uprobe() might return a NULL pointer, put_uprobe() can't deal with this. Signed-off-by:
-
- 14 Sep, 2012 5 commits
-
-
Namhyung Kim authored
As a side effect of commit f5951d56 ("perf hists browser: Use perf_hpp__format functions") perf report TUI got a problem of not refreshing the first character. Since the previous patch restores the column width of "overhead" to 7 we can start at column 0 now. Reported-by:
-
Namhyung Kim authored
Current hpp format functions assume that the output will fit to 6 character including % sign (XX.YY%) so used "%5.2f%%" as a format string. However it might be the case if collapsing resulted in a single entry which has 100.00% (7 character) of period. In this case the output will be shifted by 1 character. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For the reasons stated on: commit 0a84f007 Author: David Daney <david.daney@cavium.com> perf tools: Fix broken build by defining _GNU_SOURCE in Makefile Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: David Ahern <dsahern@gmail.com> Cc: David Daney <david.daney@cavium.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-e2nofbmj4uf0ykgsytxvt9pu@git.kernel.orgSigned-off-by:
-
Namhyung Kim authored
The commit a116e05d ("perf sched: Remove die() calls") replaced die() call to pr_debug + return -1, but it should be pr_err otherwise it'll not show up unless -v option is given. Fix it. Signed-off-by:
-
Namhyung Kim authored
The commit 32c7f738 ("perf test: Remove die() calls") replaced die() call to pr_debug + return -1, but it should be pr_err otherwise it'll not show up unless -v option is given. Fix it. Signed-off-by:
-
