- 05 Oct, 2010 1 commit
-
-
Hari Kanigeri authored
The flush_iotlb_page is not loading the cam register before flushing the cam entry. This causes wrong entry to be flushed out from the TLB, and if the entry happens to be a locked TLB entry it would lead to MMU faults. The fix is to load the cam register with the address to be flushed before flushing the TLB entry. Signed-off-by:
Hari Kanigeri <h-kanigeri2@ti.com> Acked-by:
Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
- 01 Oct, 2010 13 commits
-
-
Linus Torvalds authored
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: McBSP: tx_irq_completion used in rx_irq_handler omap: Fix compile dependency to LEDS_CLASS
-
Frederic Weisbecker authored
Prevent from recursively locking the reiserfs lock in reiserfs_unpack() because we may call journal_begin() that requires the lock to be taken only once, otherwise it won't be able to release the lock while taking other mutexes, ending up in inverted dependencies between the journal mutex and the reiserfs lock for example. This fixes: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.35.4.4a #3 ------------------------------------------------------- lilo/1620 is trying to acquire lock: (&journal->j_mutex){+.+...}, at: [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs] but task is already holding lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&REISERFS_SB(s)->lock){+.+.+.}: [<c10562b7>] lock_acquire+0x67/0x80 [<c12facad>] __mutex_lock_common+0x4d/0x410 [<c12fb0c8>] mutex_lock_nested+0x18/0x20 [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs] [<d0325c06>] do_journal_begin_r+0x86/0x340 [reiserfs] [<d0325f77>] journal_begin+0x77/0x140 [reiserfs] [<d0315be4>] reiserfs_remount+0x224/0x530 [reiserfs] [<c10b6a20>] do_remount_sb+0x60/0x110 [<c10cee25>] do_mount+0x625/0x790 [<c10cf014>] sys_mount+0x84/0xb0 [<c12fca3d>] syscall_call+0x7/0xb -> #0 (&journal->j_mutex){+.+...}: [<c10560f6>] __lock_acquire+0x1026/0x1180 [<c10562b7>] lock_acquire+0x67/0x80 [<c12facad>] __mutex_lock_common+0x4d/0x410 [<c12fb0c8>] mutex_lock_nested+0x18/0x20 [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs] [<d0325f77>] journal_begin+0x77/0x140 [reiserfs] [<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs] [<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs] [<c10db9db>] __block_prepare_write+0x1bb/0x3a0 [<c10dbbe6>] block_prepare_write+0x26/0x40 [<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs] [<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs] [<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3188>] vfs_ioctl+0x28/0xa0 [<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3eb3>] sys_ioctl+0x63/0x70 [<c12fca3d>] syscall_call+0x7/0xb other info that might help us debug this: 2 locks held by lilo/1620: #0: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d032945a>] reiserfs_unpack+0x6a/0x120 [reiserfs] #1: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs] stack backtrace: Pid: 1620, comm: lilo Not tainted 2.6.35.4.4a #3 Call Trace: [<c10560f6>] __lock_acquire+0x1026/0x1180 [<c10562b7>] lock_acquire+0x67/0x80 [<c12facad>] __mutex_lock_common+0x4d/0x410 [<c12fb0c8>] mutex_lock_nested+0x18/0x20 [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs] [<d0325f77>] journal_begin+0x77/0x140 [reiserfs] [<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs] [<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs] [<c10db9db>] __block_prepare_write+0x1bb/0x3a0 [<c10dbbe6>] block_prepare_write+0x26/0x40 [<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs] [<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs] [<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3188>] vfs_ioctl+0x28/0xa0 [<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3eb3>] sys_ioctl+0x63/0x70 [<c12fca3d>] syscall_call+0x7/0xb Reported-by:
Jarek Poplawski <jarkao2@gmail.com> Tested-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: All since 2.6.32 <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Frederic Weisbecker authored
The reiserfs mutex already depends on the inode mutex, so we can't lock the inode mutex in reiserfs_unpack() without using the safe locking API, because reiserfs_unpack() is always called with the reiserfs mutex locked. This fixes: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.35c #13 ------------------------------------------------------- lilo/1606 is trying to acquire lock: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs] but task is already holding lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&REISERFS_SB(s)->lock){+.+.+.}: [<c1056347>] lock_acquire+0x67/0x80 [<c12f083d>] __mutex_lock_common+0x4d/0x410 [<c12f0c58>] mutex_lock_nested+0x18/0x20 [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs] [<d0329e9a>] reiserfs_lookup_privroot+0x2a/0x90 [reiserfs] [<d0316b81>] reiserfs_fill_super+0x941/0xe60 [reiserfs] [<c10b7d17>] get_sb_bdev+0x117/0x170 [<d0313e21>] get_super_block+0x21/0x30 [reiserfs] [<c10b74ba>] vfs_kern_mount+0x6a/0x1b0 [<c10b7659>] do_kern_mount+0x39/0xe0 [<c10cebe0>] do_mount+0x340/0x790 [<c10cf0b4>] sys_mount+0x84/0xb0 [<c12f25cd>] syscall_call+0x7/0xb -> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}: [<c1056186>] __lock_acquire+0x1026/0x1180 [<c1056347>] lock_acquire+0x67/0x80 [<c12f083d>] __mutex_lock_common+0x4d/0x410 [<c12f0c58>] mutex_lock_nested+0x18/0x20 [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs] [<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3228>] vfs_ioctl+0x28/0xa0 [<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3f53>] sys_ioctl+0x63/0x70 [<c12f25cd>] syscall_call+0x7/0xb other info that might help us debug this: 1 lock held by lilo/1606: #0: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs] stack backtrace: Pid: 1606, comm: lilo Not tainted 2.6.35c #13 Call Trace: [<c1056186>] __lock_acquire+0x1026/0x1180 [<c1056347>] lock_acquire+0x67/0x80 [<c12f083d>] __mutex_lock_common+0x4d/0x410 [<c12f0c58>] mutex_lock_nested+0x18/0x20 [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs] [<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3228>] vfs_ioctl+0x28/0xa0 [<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3f53>] sys_ioctl+0x63/0x70 [<c12f25cd>] syscall_call+0x7/0xb Reported-by:
Jarek Poplawski <jarkao2@gmail.com> Tested-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: <stable@kernel.org> [2.6.32 and later] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kukjin Kim authored
Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Acked-by:
Ben Dooks <ben-linux@fluff.org> Acked-by:
Russell King <rmk@arm.linux.org.uk> Cc: Kyungmin Park <kmpark@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Petr Vandrovec authored
I moved couple years ago, so let's update my email and snail mail. And I do not have any access to Matrox hardware anymore, and I'm quite unresponsive to matroxfb bug reports (sorry Alan), so saying that I'm maintainer is a bit far fetched. For ncpfs I do not use ncpfs in my daily life either, but at least I can test that one, so I can stay listed here for odd fixes. Signed-off-by:
Petr Vandrovec <petr@vandrovec.name> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Olsa authored
Having the limits file world readable will ease the task of system management on systems where root privileges might be restricted. Having admin restricted with root priviledges, he/she could not check other users process' limits. Also it'd align with most of the /proc stat files. Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Cc: Eugene Teo <eugene@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Don Mullis authored
If the original list is a POT in length, the first callback from line 73 will pass a==b both pointing to the original list_head. This is dangerous because the 'list_sort()' user can use 'container_of()' and accesses the "containing" object, which does not necessary exist for the list head. So the user can access RAM which does not belong to him. If this is a write access, we can end up with memory corruption. Signed-off-by:
Don Mullis <don.mullis@gmail.com> Tested-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Rosenberg authored
The semctl syscall has several code paths that lead to the leakage of uninitialized kernel stack memory (namely the IPC_INFO, SEM_INFO, IPC_STAT, and SEM_STAT commands) during the use of the older, obsolete version of the semid_ds struct. The copy_semid_to_user() function declares a semid_ds struct on the stack and copies it back to the user without initializing or zeroing the "sem_base", "sem_pending", "sem_pending_last", and "undo" pointers, allowing the leakage of 16 bytes of kernel stack memory. The code is still reachable on 32-bit systems - when calling semctl() newer glibc's automatically OR the IPC command with the IPC_64 flag, but invoking the syscall directly allows users to use the older versions of the struct. Signed-off-by:
Dan Rosenberg <dan.j.rosenberg@gmail.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Marcin Slusarz authored
Array of udimm sysfs attributes was not ended with NULL marker, leading to dereference of random memory. EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm0 EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm1 EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm2 BUG: unable to handle kernel NULL pointer dereference at 00000000000001a4 IP: [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1 Pid: 1, comm: swapper Not tainted 2.6.36-rc3-nv+ #483 P6T SE/System Product Name RIP: 0010:[<ffffffff81330b36>] [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1 (...) Call Trace: [<ffffffff81330b86>] edac_create_mci_instance_attributes+0x198/0x1f1 [<ffffffff81330c9a>] edac_create_sysfs_mci_device+0xbb/0x2b2 [<ffffffff8132f533>] edac_mc_add_mc+0x46b/0x557 [<ffffffff81428901>] i7core_probe+0xccf/0xec0 RIP [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1 ---[ end trace 20de320855b81d78 ]--- Kernel panic - not syncing: Attempted to kill init! Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by:
Doug Thompson <dougthompson@xmission.com> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
sparc64 allmodconfig: drivers/serial/mrst_max3110.c: In function `serial_m3110_startup': drivers/serial/mrst_max3110.c:470: error: `IRQ_TYPE_EDGE_FALLING' undeclared (first use in this function) Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Fix the warnings arch/m68k/mac/macboing.c: In function 'mac_mksound': arch/m68k/mac/macboing.c:189: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c:211: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c: In function 'mac_quadra_start_bell': arch/m68k/mac/macboing.c:241: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c:263: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c: In function 'mac_quadra_ring_bell': arch/m68k/mac/macboing.c:283: warning: comparison of distinct pointer types lacks a cast Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
alpha allmodconfig: drivers/serial/mfd.c:144: error: implicit declaration of function 'kzalloc' drivers/serial/mfd.c:144: warning: assignment makes pointer from integer without a cast Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ira W. Snyder authored
The kfifo_dma family of functions use sg_mark_end() on the last element in their scatterlist. This forces use of a fresh scatterlist for each DMA operation, which makes recycling a single scatterlist impossible. Change the behavior of the kfifo_dma functions to match the usage of the dma_map_sg function. This means that users must respect the returned nents value. The sample code is updated to reflect the change. This bug is trivial to cause: call kfifo_dma_in_prepare() such that it prepares a scatterlist with a single entry comprising the whole fifo. This is the case when you map the entirety of a newly created empty fifo. This causes the setup_sgl() function to mark the first scatterlist entry as the end of the chain, no matter what comes after it. Afterwards, add and remove some data from the fifo such that another call to kfifo_dma_in_prepare() will create two scatterlist entries. It returns nents=2. However, due to the previous sg_mark_end() call, sg_is_last() will now return true for the first scatterlist element. This causes the sample code to print a single scatterlist element when it should print two. By removing the call to sg_mark_end(), we make the API as similar as possible to the DMA mapping API. All users are required to respect the returned nents. Signed-off-by:
Ira W. Snyder <iws@ovro.caltech.edu> Cc: Stefani Seibold <stefani@seibold.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 30 Sep, 2010 4 commits
-
-
Linus Torvalds authored
Commit c52c2ddc ("alpha: switch osf_sigprocmask() to use of sigprocmask()") had several problems. The more obvious compile issues got fixed in commit 0f44fbd2 ("alpha: fix compile problem in arch/alpha/kernel/signal.c"), but it also caused a regression. Since _BLOCKABLE is already the set of signals that can be blocked, the code should do "newmask & _BLOCKABLE" rather than inverting _BLOCKABLE before masking. Reported-by:
Michael Cree <mcree@orcon.net.nz> Patch-by:
Al Viro <viro@zeniv.linux.org.uk> Patch-by:
Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2Linus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Don't walk off the end of fast symlinks.
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_txLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: fix interrupt clearing for mv_xor missing inline keyword for static function in linux/dmaengine.h dma/shdma: move dereference below the NULL check
-
Joel Becker authored
ocfs2 fast symlinks are NUL terminated strings stored inline in the inode data area. However, disk corruption or a local attacker could, in theory, remove that NUL. Because we're using strlen() (my fault, introduced in a731d1 when removing vfs_follow_link()), we could walk off the end of that string. Signed-off-by:
Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
-
- 29 Sep, 2010 8 commits
-
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: force background CIL push under sustained load
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix max8925 irq control bit incorrect setting mfd: Ignore non-GPIO IRQs when setting wm831x IRQ types
-
Daniel J Blueman authored
Fix build failure from recent interface change and merge. Tested on OMAP3430. Signed-off-by:
Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Chinner authored
I have been seeing occasional pauses in transaction throughput up to 30s long under heavy parallel workloads. The only notable thing was that the xfsaild was trying to be active during the pauses, but making no progress. It was running exactly 20 times a second (on the 50ms no-progress backoff), and the number of pushbuf events was constant across this time as well. IOWs, the xfsaild appeared to be stuck on buffers that it could not push out. Further investigation indicated that it was trying to push out inode buffers that were pinned and/or locked. The xfsbufd was also getting woken at the same frequency (by the xfsaild, no doubt) to push out delayed write buffers. The xfsbufd was not making any progress because all the buffers in the delwri queue were pinned. This scan- and-make-no-progress dance went one in the trace for some seconds, before the xfssyncd came along an issued a log force, and then things started going again. However, I noticed something strange about the log force - there were way too many IO's issued. 516 log buffers were written, to be exact. That added up to 129MB of log IO, which got me very interested because it's almost exactly 25% of the size of the log. He delayed logging code is suppose to aggregate the minimum of 25% of the log or 8MB worth of changes before flushing. That's what really puzzled me - why did a log force write 129MB instead of only 8MB? Essentially what has happened is that no CIL pushes had occurred since the previous tail push which cleared out 25% of the log space. That caused all the new transactions to block because there wasn't log space for them, but they kick the xfsaild to push the tail. However, the xfsaild was not making progress because there were buffers it could not lock and flush, and the xfsbufd could not flush them because they were pinned. As a result, both the xfsaild and the xfsbufd could not move the tail of the log forward without the CIL first committing. The cause of the problem was that the background CIL push, which should happen when 8MB of aggregated changes have been committed, is being held off by the concurrent transaction commit load. The background push does a down_write_trylock() which will fail if there is a concurrent transaction commit holding the push lock in read mode. With 8 CPUs all doing transactions as fast as they can, there was enough concurrent transaction commits to hold off the background push until tail-pushing could no longer free log space, and the halt would occur. It should be noted that there is no reason why it would halt at 25% of log space used by a single CIL checkpoint. This bug could definitely violate the "no transaction should be larger than half the log" requirement and hence result in corruption if the system crashed under heavy load. This sort of bug is exactly the reason why delayed logging was tagged as experimental.... The fix is to start blocking background pushes once the threshold has been exceeded. Rework the threshold calculations to keep the amount of log space a CIL checkpoint can use to below that of the AIL push threshold to avoid the problem completely. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Alex Elder <aelder@sgi.com> Reviewed-by:
Christoph Hellwig <hch@lst.de>
-
Kevin Liu authored
In max8925_irq_sync_unlock(), irq control bit is set at the same time. Zero means enabling irq, and one means disabling irq. The original code is: irq_chg[0] &= irq_data->enable; It should be changed to: irq_chg[0] &= ~irq_data->enable; Otherwise, irq control bit is mess. Signed-off-by:
Kevin Liu <kliu5@marvell.com> Signed-off-by:
Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Mark Brown authored
The driver was originally tested with an additional patch which made this unneeded but that patch had issuges and got lost on the way to mainline, causing problems when the errors are reported. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Cc: stable@kernel.org
-
Linus Torvalds authored
-
David Howells authored
When caching is disabled on the MN10300 arch, the sys_cacheflush() function is removed by conditional stuff in the makefiles, but is still referred to by the syscall table. Provide a null version that just returns 0 when caching is disabled (or -EINVAL if the arguments are silly). Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Sep, 2010 9 commits
-
-
Linus Torvalds authored
Tssk. Apparently Al hadn't checked commit c52c2ddc ("alpha: switch osf_sigprocmask() to use of sigprocmask()") at all. It doesn't compile. Fixed as per suggestions from Michael Cree. Reported-by:
Michael Cree <mcree@orcon.net.nz> Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: fix module refcount breakage introduced by libahci split
-
Tejun Heo authored
libata depends on scsi_host_template for module reference counting and sht's should be owned by each low level driver. During libahci split, the sht was left with libahci.ko leaving the actual low level drivers not reference counted. This made ahci and ahci_platform always unloadable even while they're being actively used. Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for each low level ahci driver. stable: only applicable to 2.6.35. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Pedro Francisco <pedrogfrancisco@gmail.com> Tested-by:
Michael Tokarev <mjt@tls.msk.ru> Cc: stable@kernel.org Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon (coretemp): Fix build breakage if SMP is undefined
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix pci_resource_alignment prototype
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) tcp: Fix >4GB writes on 64-bit. net/9p: Mount only matching virtio channels de2104x: fix ethtool tproxy: check for transparent flag in ip_route_newports ipv6: add IPv6 to neighbour table overflow warning tcp: fix TSO FACK loss marking in tcp_mark_head_lost 3c59x: fix regression from patch "Add ethtool WOL support" ipv6: add a missing unregister_pernet_subsys call s390: use free_netdev(netdev) instead of kfree() sgiseeq: use free_netdev(netdev) instead of kfree() rionet: use free_netdev(netdev) instead of kfree() ibm_newemac: use free_netdev(netdev) instead of kfree() smsc911x: Add MODULE_ALIAS() net: reset skb queue mapping when rx'ing over tunnel br2684: fix scheduling while atomic de2104x: fix TP link detection de2104x: fix power management de2104x: disable autonegotiation on broken hardware net: fix a lockdep splat e1000e: 82579 do not gate auto config of PHY by hardware during nominal use ...
-
Guenter Roeck authored
Commit e40cc4bd introduced a build breakage if CONFIG_SMP is undefined. This commit fixes the problem. This fix is only a workaround. For a real fix, cpu_sibling_mask() should be defined in UP include code, eg in linux/smp.h, and asm/smp.h should not be included directly. This fix is currently not possible because asm/smp.h defines cpu_sibling_mask() unconditionally and is included directly from many source files. Reported-by:
Ingo Molnar <mingo@elte.hu> Tested-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Avoid 'constant_test_bit()' misoptimization due to cast to non-volatile
-
David S. Miller authored
Fixes kernel bugzilla #16603 tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write zero bytes, for example. There is also the problem higher up of how verify_iovec() works. It wants to prevent the total length from looking like an error return value. However it does this using 'int', but syscalls return 'long' (and thus signed 64-bit on 64-bit machines). So it could trigger false-positives on 64-bit as written. So fix it to use 'long'. Reported-by:
Olaf Bonorden <bono@onlinehome.de> Reported-by:
Daniel Büse <dbuese@gmx.de> Reported-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 27 Sep, 2010 5 commits
-
-
Dan Rosenberg authored
The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a pktcdvd_device from the global pkt_devs array. The index into this array is provided directly by the user and is a signed integer, so the comparison to ensure that it falls within the bounds of this array will fail when provided with a negative index. This can be used to read arbitrary kernel memory or cause a crash due to an invalid pointer dereference. This can be exploited by users with permission to open /dev/pktcdvd/control (on many distributions, this is readable by group "cdrom"). Signed-off-by:
Dan Rosenberg <dan.j.rosenberg@gmail.com> [ Rather than add a cast, just make the function take the right type -Linus ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
The configuration choice for the port on which the GDB stub listens has a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to match the option. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sven Eckelmann authored
p9_virtio_create will only compare the the channel's tag characters against the device name till the end of the channel's tag but not till the end of the device name. This means that if a user defines channels with the tags foo and foobar then he would mount foo when he requested foonot and may mount foo when he requested foobar. Thus it is necessary to check both string lengths against each other in case of a successful partial string match. Signed-off-by:
Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ondrej Zary authored
When the interface is up, using ethtool breaks it because: a) link is put down but media_timer interval is not shortened to NO_LINK b) rxtx is stopped but not restarted Also manual 10baseT-HD (and probably FD too - untested) mode does not work - the link is forced up, packets are transmitted but nothing is received. Changing CSR14 value to match documentation (not disabling link check) fixes this. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Acked-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
-