- 07 Oct, 2019 14 commits
-
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8723bs/core/rtw_recv.c: In function validate_80211w_mgmt: drivers/staging/rtl8723bs/core/rtw_recv.c:1415:8: warning: variable ppp set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/core/rtw_recv.c: In function validate_80211w_mgmt: drivers/staging/rtl8723bs/core/rtw_recv.c:1403:5: warning: variable type set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/core/rtw_recv.c: In function recvframe_defrag: drivers/staging/rtl8723bs/core/rtw_recv.c:1713:6: warning: variable data set but not used [-Wunused-but-set-variable] They are not used since commit 554c0a3a ("staging: Add rtl8723bs sdio wifi driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Link: https://lore.kernel.org/r/1570352999-45790-5-git-send-email-zhengbin13@huawei.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8723bs/core/rtw_security.c: In function rtw_tkip_encrypt: drivers/staging/rtl8723bs/core/rtw_security.c:660:6: warning: variable prwskeylen set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/core/rtw_security.c: In function rtw_tkip_decrypt: drivers/staging/rtl8723bs/core/rtw_security.c:768:6: warning: variable prwskeylen set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/core/rtw_security.c: In function rtw_aes_encrypt: drivers/staging/rtl8723bs/core/rtw_security.c:1528:6: warning: variable prwskeylen set but not used [-Wunused-but-set-variable] It is not used since commit 554c0a3a ("staging: Add rtl8723bs sdio wifi driver") Reported-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8723bs/core/rtw_sta_mgt.c: In function rtw_alloc_stainfo: drivers/staging/rtl8723bs/core/rtw_sta_mgt.c:190:7: warning: variable tmp_aid set but not used [-Wunused-but-set-variable] It is not used since commit 554c0a3a ("staging: Add rtl8723bs sdio wifi driver") Reported-by:
-
Gabriela Bittencourt authored
Cleans up checks of "Alignment should match open parenthesis" Signed-off-by:
Gabriela Bittencourt <gabrielabittencourt00@gmail.com> Link: https://lore.kernel.org/r/20191007003902.21911-1-gabrielabittencourt00@gmail.comSigned-off-by:
-
Javier F. Arias authored
Switch constant place as it should be on the right side of the test. Issue found by checkpatch. Signed-off-by:
Javier F. Arias <jarias.linux@gmail.com> Link: https://lore.kernel.org/r/20191007033202.45czxuochtylkddf@gmail.comSigned-off-by:
-
Gabriela Bittencourt authored
Cleans up warnings of "line over 80 characters" Signed-off-by:
-
Javier F. Arias authored
Remove braces that are not necessary for any arm of this statement. Issue found by checkpatch. Signed-off-by:
-
Gabriela Bittencourt authored
Cleans up checks of "don't use multiple blank line" Signed-off-by:
Quentin Deslandes <quentin.deslandes@itdev.co.uk> Link: https://lore.kernel.org/r/20191006195854.9843-1-gabrielabittencourt00@gmail.comSigned-off-by:
-
Sergio Paracuellos authored
Depending on revision of the chip, reset lines are inverted. Make code more readable making use of 'soc_device_match' in driver probe function. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20191006181032.19112-1-sergio.paracuellos@gmail.comSigned-off-by:
-
Sumera Priyadarsini authored
Fixes indentation for if condition in the file r8190_rtl8256.c for better readability as suggested by Dan Carpenter. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Sumera Priyadarsini <sylphrenadin@gmail.com> Link: https://lore.kernel.org/r/20191006105300.10181-1-sylphrenadin@gmail.comSigned-off-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8723bs/hal/sdio_ops.c: In function sdio_read_port: drivers/staging/rtl8723bs/hal/sdio_ops.c:430:6: warning: variable oldcnt set but not used [-Wunused-but-set-variable] It is not used since commit dedf215b ("staging: rtl8723bs: remove unused code") Reported-by:
-
Michael Straube authored
Variable badworden is asigned in two subsequent lines. So the first asignment is useless and not needed. Also the initialization to zero is not needed. Remove the first asignment and the initialization. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20191005141852.88712-1-straube.linux@gmail.comSigned-off-by:
-
Adham Abozaeid authored
WILC doesn't support per-vif tx power, and hence, wdev will always be null in calls to set_tx_power. Instead, wiphy should be used to execute the operation Signed-off-by:
Adham Abozaeid <adham.abozaeid@microchip.com> Link: https://lore.kernel.org/r/20191004214011.7623-1-adham.abozaeid@microchip.comSigned-off-by:
-
Javier F. Arias authored
Remove unnecessary braces for single statement block. Issue found by checkpatch. Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Link: https://lore.kernel.org/r/20191006133016.GA22297@gmail.comSigned-off-by:
-
- 04 Oct, 2019 26 commits
-
-
Benjamin Poirier authored
When operating at mtu 9000, qlge does order-1 allocations for rx buffers in atomic context. This is especially unreliable when free memory is low or fragmented. Add an approach similar to commit 3161e453 ("virtio: net refill on out-of-memory") to qlge so that the device doesn't lock up if there are allocation failures. Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Link: https://lore.kernel.org/r/20190927101210.23856-18-bpoirier@suse.comSigned-off-by:
-
Benjamin Poirier authored
Reading the {s,l}bq_prod_idx registers on a running device, it appears that the adapter will only use buffers up to prod_idx & 0xfff0. The driver currently uses fixed-size guard zones (16 for sbq, 32 for lbq - don't know why this difference). After the previous patch, this approach no longer guarantees prod_idx values aligned on multiples of 16. While it appears that we can write unaligned values to prod_idx without ill effects on device operation, it makes more sense to change qlge_refill_bq() to refill up to a limit that corresponds with the device's behavior. Signed-off-by: -
Benjamin Poirier authored
Currently, if we repeatedly fail to allocate all of the buffers from the desired batching budget, we will never update the prod_idx register. Restructure code to always update prod_idx if new buffers could be allocated. This eliminates the current two stage process (clean_idx -> prod_idx) and some associated bookkeeping variables. Signed-off-by:
-
Benjamin Poirier authored
Instead of clearing the structure wholesale, it is sufficient to initialize the skb member which is used to manage sbq instances. lbq instances are managed according to curr_idx and clean_idx. Signed-off-by:
-
Benjamin Poirier authored
This just repeats what the other memset a few lines above did. Signed-off-by:
-
Benjamin Poirier authored
Given the way the driver currently works, these values are always known at compile time. Signed-off-by:
-
Benjamin Poirier authored
Given that (u16) 65536 == 0, that expression can be replaced by a simple cast. Signed-off-by:
-
Benjamin Poirier authored
This field is redundant, the type can be determined from the index, cq_id. Signed-off-by:
-
Benjamin Poirier authored
Using the unmap addr elsewhere than unmap calls is a misuse of the dma api. In prevision of this fix, qlge kept two copies of the dma address around ;) Fixes: c4e84bde ("qlge: New Qlogic 10Gb Ethernet Driver.") Fixes: 7c734359 ("qlge: Size RX buffers based on MTU.") Fixes: 2c9a266a ("qlge: Fix receive packets drop.") Signed-off-by:
-
Benjamin Poirier authored
The qlge driver (and device) uses two kinds of buffers for reception, so-called "small buffers" and "large buffers". The two are arranged in rings, the sbq and lbq. These two share similar data structures and code. Factor out data structures into a common struct qlge_bq, make required adjustments to code and dedup the most obvious cases of copy/paste. This patch should not introduce any functional change other than to some of the printk format strings. Signed-off-by:
-
Benjamin Poirier authored
This is unneeded for two reasons: 1) the cpu does not write data for the device in the mapping 2) calls like ..._sync_..._for_device(..., ..._FROMDEVICE) are nonsensical, see commit 3f0fb4e8 ("Documentation/DMA-API-HOWTO.txt: fix misleading example") Signed-off-by:
-
Benjamin Poirier authored
Tx completion rings have sbq_buf_size = 0 but there's no case where the code actually tests on that value. We can remove sbq_buf_size and use a constant instead. Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20190927101210.23856-7-bpoirier@suse.comSigned-off-by:
-
Benjamin Poirier authored
The size of the mapping is known statically in all cases, there's no need to save it at runtime. Remove this member. Signed-off-by:
Manish Chopra <manishc@marvell.com> Link: https://lore.kernel.org/r/20190927101210.23856-6-bpoirier@suse.comSigned-off-by:
-
Benjamin Poirier authored
lbq_buf_size is duplicated to every rx_ring structure whereas lbq_buf_order is present once in the ql_adapter structure. All rings use the same buf size, keep only one copy of it. Also factor out the calculation of lbq_buf_size instead of having two copies. Signed-off-by:
-
Benjamin Poirier authored
As already done in ql_get_curr_lchunk(), this member can be replaced by a simple test. Signed-off-by:
-
Benjamin Poirier authored
qlge uses an irq enable/disable refcounting scheme that is: * poorly implemented Uses a spin_lock to protect accesses to the irq_cnt atomic variable. * buggy Breaks when there is not a 1:1 sequence of irq - napi_poll, such as when using SO_BUSY_POLL. * unnecessary The purpose or irq_cnt is to reduce irq control writes when multiple work items result from one irq: the irq is re-enabled after all work is done. Analysis of the irq handler shows that there is only one case where there might be two workers scheduled at once, and those have separate irq masking bits. Therefore, remove irq_cnt. Additionally, we get a performance improvement: perf stat -e cycles -a -r5 super_netperf 100 -H 192.168.33.1 -t TCP_RR Before: 628560 628056 622103 622744 627202 [...] 268,803,947,669 cycles ( +- 0.09% ) After: 636300 634106 634984 638555 634188 [...] 259,237,291,449 cycles ( +- 0.19% ) Signed-off-by:
-
Benjamin Poirier authored
Tracing the driver operation reveals that the INTR_EN_EN bit (per-queue interrupt control) does not immediately prevent rx completion interrupts when the device is operating in INTx mode. This leads to interrupts being raised while napi is scheduled/running. Those interrupts are ignored by qlge_isr() and falsely reported as IRQ_NONE thanks to the irq_cnt scheme. This in turn can cause frames to loiter in the receive queue until a later frame leads to another rx interrupt that will schedule napi. Use the INTR_EN_EI bit (master interrupt control) instead. Signed-off-by:
-
Jérôme Pouiller authored
Finish to fill struct ieee80211_ops with necessary callbacks. Driver is now ready to be registered to mac80211. Signed-off-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20190919142527.31797-21-Jerome.Pouiller@silabs.comSigned-off-by:
-
Jérôme Pouiller authored
wfx_set_key() mostly copy bytes on correct offsets. A big piece of code for a simple work. Unfortunately, I did not found any way to factorize it. Signed-off-by:
-
Jérôme Pouiller authored
Chip can make foreground scan or background, but both can't be mixed in same request. So, we need to split each mac80211 requests into multiple HIF requests. Signed-off-by:
-
Jérôme Pouiller authored
Again, this task is more complex than it should since driver try to handle itself power saving of stations. Signed-off-by:
-
Jérôme Pouiller authored
Three things make this task more complex than it should: - Chip necessitate to associate a link-id to each station. It is same thing than association ID but, using 8 bits only. - Rate policy is sent separately from Tx frames - Driver try to handle itself power saving of stations and multicast data Signed-off-by: -
Jérôme Pouiller authored
Add traces when debug events happen and allow to ask internal information to chip. These features work independently from mac80211. Signed-off-by:
-
Jérôme Pouiller authored
A few tasks remain to be done in order to finish chip initial configuration: - configure chip to use multi-tx confirmation (speed up data transfer) - configure chip to use wake-up feature (save power consumption during runtime) - set hardware configuration (clocks, RF, pinout, etc...) using a Platform Data Set (PDS) file On release, driver completely shutdown the chip to save power consumption. Documentation about PDS and PDS data for sample boards are available here[1]. One day, PDS data may find a place in device tree but, currently, PDS is too much linked with firmware to allowing that. This patch also add "send_pds" file in debugfs to be able to dynamically change PDS (only for debug, of course). [1]: https://github.com/SiliconLabs/wfx-firmware/tree/master/PDSSigned-off-by: -
Jérôme Pouiller authored
Chip support encryption of the link between host and chip. This feature is called "secure link". Driver code on github[1] support it. However, it relies on mbedtls for cryptographic functions. So, I decided to not import this feature in current patch. However, in order to keep code synchronized between github and kernel, I imported all code related to this feature, even if most of it is just no-op. [1]: https://github.com/SiliconLabs/wfx-linux-driver/Signed-off-by:
-
Jérôme Pouiller authored
Provide an abstraction for HIF commands. Signed-off-by:
-
