- 10 Nov, 2015 1 commit
-
-
Simon Horman authored
Instantiate the thermal sensor in the r8a7793 device tree. Based on very similar work for the r8a7790 by Magnus Damm. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
- 28 Oct, 2015 1 commit
-
-
Sergei Shtylyov authored
The Henninger low cost board was never sold and so had no users outside Renesas (and Cogent Embedded). Instead Renesas has made the Porter board which has mostly similar hardware. Now that the Porter board support is on par with Henninger, we can remove the Henninger's device tree file. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
- 27 Oct, 2015 1 commit
-
-
Sergei Shtylyov authored
Define the Porter board dependent part of the CAN0 device node. This patch is analogous to the commit 457acc4a ("ARM: shmobile: henninger: add CAN0 DT support") as there are no differences between the boards in this respect. Signed-off-by:
-
- 23 Oct, 2015 5 commits
-
-
Magnus Damm authored
Add IPMMU nodes for the r8a7793 SoC. The IPMMU configuration for r8a7793 is identical to r8a7791 and includes SY0, SY1, DS, MP, MX, RT and GP. Signed-off-by:
Magnus Damm <damm+renesas@opensource.se> Signed-off-by:
-
Magnus Damm authored
The r8a7794 IPMMU nodes for MX and DS are currently lacking a line containing 'status = "disabled"', fix this by making sure they are disabled like all other IPMMU nodes. Signed-off-by:
-
Sergei Shtylyov authored
On R8A7791, GPIO banks 1 and 7 are missing pins 26 to 31. Correct the "gpio-ranges" properties of the GPIO1 node (GPIO7 is already correct). Signed-off-by:
-
Sergei Shtylyov authored
On R8A7790, GPIO banks 1 and 2 are missing pins 30 and 31. Correct the "gpio-ranges" properties of the corresponding device nodes. Signed-off-by:
-
Sudeep Holla authored
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
-
- 21 Oct, 2015 1 commit
-
-
Sergei Shtylyov authored
Define the SILK board dependent part of the SDHI1 (connected to micro-SD slot) device nodes along with the necessary voltage regulators. Based on the original patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by:
-
- 19 Oct, 2015 2 commits
-
-
Geert Uytterhoeven authored
R-Car M2-W does not have an IMP core or an IMP clock. Signed-off-by:
-
Geert Uytterhoeven authored
R-Car E2 does not have an IMP core or an IMP clock. Signed-off-by:
-
- 15 Oct, 2015 1 commit
-
-
Sergei Shtylyov authored
Enable HS-USB device for the Porter board, defining the GPIO that the driver should check when probing (which is the ID output from MAX3355 OTG chip). Note that there will be pinctrl-related error messages if both internal PCI and HS-USB drivers are enabled but they should be just ignored. This patch is analogous to the commit 6f4f7156 ("ARM: shmobile: henninger: enable HS-USB") as there are no differences between the boards in this respect. Signed-off-by:
-
- 13 Oct, 2015 1 commit
-
-
Sergei Shtylyov authored
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to them and also enable USB PHY device for the Porter board. We have to enable everything in one patch since EHCI/OHCI devices are already linked to the USB PHY device. Signed-off-by:
-
- 12 Oct, 2015 1 commit
-
-
Sergei Shtylyov authored
Enable the PCIe controller and clock for the Porter board. This patch is analogous to the commit 485f3ce6 ("ARM: shmobile: henninger: Enable PCIe Controller & PCIe bus clock") as there are no differences between the boards in this respect. Signed-off-by:
-
- 11 Oct, 2015 1 commit
-
-
Sergei Shtylyov authored
Define the Porter board dependent part of the QSPI device node. Add device nodes for Spansion S25FL512S SPI flash and the MTD partitions on it. This patch is mostly analogous to the commit f59838d4 ("ARM: shmobile: henninger: add QSPI DT support") as there are no differences between the boards in this respect. Signed-off-by:
-
- 09 Oct, 2015 2 commits
-
-
Sergei Shtylyov authored
Define the Porter board dependent part of the VIN0 device node. Add the device node for Analog Devices ADV7180 video decoder to I2C2 bus. Add the necessary subnodes to interconnect VIN0 and ADV7180 devices. This patch is analogous to the commit 8d62f4f7 ("ARM: shmobile: henninger: add VIN0/ADV7180 DT support") as there are no differences between the boards in this respect. Signed-off-by:
-
Sergei Shtylyov authored
Define the Porter board dependent part of the I2C2 device node. This patch is analogous to the commit 29a647c3 ("ARM: shmobile: henninger: add I2C2 DT support") as there are no differences between the boards in this respect. Signed-off-by:
-
- 08 Oct, 2015 1 commit
-
-
Sergei Shtylyov authored
Enable SATA0 device for the Porter board. This patch is analogous to the commit 5a62ec57 ("ARM: shmobile: henninger: enable SATA0") as there are no differences between the boards in this respect. Signed-off-by:
-
- 07 Oct, 2015 1 commit
-
-
Sergei Shtylyov authored
Define the Porter board dependent part of the SDHI0/2 device nodes along with the necessary voltage regulators (note that the Vcc regulators are dummy -- they are required but don't actually exist on the board). Also, GPIOs have to be used for the CD and WP signals due to the SDHI driver constraints... This patch is analogous to the commit 1299df03 ("ARM: shmobile: henninger: add SDHI0/2 DT support") as there are no differences between those boards in this respect. Signed-off-by:
-
- 06 Oct, 2015 1 commit
-
-
Sergei Shtylyov authored
Define the Porter board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting. This patch is analogous to the commit 26b0d2cf ("ARM: shmobile: henninger: add Ether DT support") as there are no differences between those boards in this respect. Signed-off-by:
-
- 05 Oct, 2015 2 commits
-
-
Sergei Shtylyov authored
Unfortunately, the SILK board bindings were not quite correct, as the board name should be all caps. Fix that, adding the board model # in parens and removing stray semicolon. Signed-off-by:
-
Sergei Shtylyov authored
Define the R8A7794 generic part of the HS-USB device node. It is up to the board file to enable the device. Signed-off-by:
-
- 02 Oct, 2015 6 commits
-
-
Kuninori Morimoto authored
The Mitsubishi AA121TD01 panel is commonly used with the Marzen, Lager and Koelsch boards. Create a .dtsi file that describe the panel and its connection to the board. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sergei Shtylyov authored
Describe the PCI USB devices that are behind the PCI bridges, adding necessary links to the USB PHY device. Signed-off-by:
-
Sergei Shtylyov authored
Enable USB PHY device for the SILK board. Signed-off-by:
-
Sergei Shtylyov authored
Define the R8A7794 generic part of the USB PHY device node. It is up to the board file to enable the device. Signed-off-by:
-
Sergei Shtylyov authored
Add the initial device tree for the R8A7791 SoC based Porter low cost board (which is a slightly modified version of the Henninger board). SCIF0 serial port support is included, so that the serial console can work. Signed-off-by:
-
Sergei Shtylyov authored
Add Porter device tree bindings documentation, listing it as a supported board. This allows to use checkpatch to validate DTSes referring to the Porter board. Signed-off-by:
-
- 30 Sep, 2015 2 commits
-
-
Sergei Shtylyov authored
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to them. Signed-off-by:
-
Sergei Shtylyov authored
Add device nodes for the R8A7794 internal PCI bridge devices. Signed-off-by:
-
- 14 Sep, 2015 10 commits
-
-
Wolfram Sang authored
It seems we used to rely on the default pinmux setting of this HW, but currently we need to explicitly set the pinmux to access this bus. It is better style, too. Signed-off-by:
Wolfram Sang <wsa@sang-engineering.com> Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Because of historical reason, audio clock didn't use CCF. Let's use it now. Signed-off-by:
-
Kuninori Morimoto authored
Because of historical reason, audio clock didn't use CCF. Let's use it now. Signed-off-by:
-
Sergei Shtylyov authored
Define the SILK board dependent part of the VIN0 device node. Add the device node for Analog Devices ADV7180 video decoder to I2C1 bus. Add the necessary subnodes to interconnect VIN0 and ADV7180 devices. Based on the Henninger VIN0/ADV8170 device tree patch by myself. Signed-off-by:
-
Sergei Shtylyov authored
Define the generic R8A7794 part of the VIN[01] device nodes. Add aliases for the VIN[01] device nodes. Signed-off-by:
-
Sergei Shtylyov authored
Define the SILK board dependent part of the I2C1 device node. Signed-off-by:
-
Sergei Shtylyov authored
Define the generic R8A7794 parts of the I2C[0-5] device nodes. Based on the original patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com>. Signed-off-by:
-
