- 14 Oct, 2014 7 commits
-
-
Michael S. Tsirkin authored
Now that virtio core ensures config changes don't arrive during probing, drop config_enable flag in virtio net. On removal, flush is now sufficient to guarantee that no change work is queued. This help simplify the driver, and will allow setting DRIVER_OK earlier without losing config change notifications. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-
Michael S. Tsirkin authored
config_mutex served two purposes: prevent multiple concurrent config change handlers, and synchronize access to config_enable flag. Since commit dbf2576e workqueue: make all workqueues non-reentrant all workqueues are non-reentrant, and config_enable is now gone. Get rid of the unnecessary lock. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-
Michael S. Tsirkin authored
Now that virtio core ensures config changes don't arrive during probing, drop config_enable flag in virtio blk. On removal, flush is now sufficient to guarantee that no change work is queued. This help simplify the driver, and will allow setting DRIVER_OK earlier without losing config change notifications. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-
Michael S. Tsirkin authored
Defer config changed notifications that arrive during probe/scan/freeze/restore. This will allow drivers to set DRIVER_OK earlier, without worrying about racing with config change interrupts. This change will also benefit old hypervisors (before 2009) that send interrupts without checking DRIVER_OK: previously, the callback could race with driver-specific initialization. This will also help simplify drivers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cosmetic changes)
-
Michael S. Tsirkin authored
This is in preparation to extending config changed event handling in core. Wrapping these in an API also seems to make for a cleaner code. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-
Michael S. Tsirkin authored
Replace duplicated code in all transports with a single wrapper in virtio.c. The only functional change is in virtio_mmio.c: if a buggy device sends us an interrupt before driver is set, we previously returned IRQ_NONE, now we return IRQ_HANDLED. As this must not happen in practice, this does not look like a big deal. See also commit 3fff0179 virtio-pci: do not oops on config change if driver not loaded. for the original motivation behind the driver check. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-
Michael S. Tsirkin authored
On restore, virtio pci does the following: + set features + init vqs etc - device can be used at this point! + set ACKNOWLEDGE,DRIVER and DRIVER_OK status bits This is in violation of the virtio spec, which requires the following order: - ACKNOWLEDGE - DRIVER - init vqs - DRIVER_OK This behaviour will break with hypervisors that assume spec compliant behaviour. It seems like a good idea to have this patch applied to stable branches to reduce the support butden for the hypervisors. Cc: stable@vger.kernel.org Cc: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-
- 10 Sep, 2014 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull UDF fixes from Jan Kara: "Fixes for UDF handling of NFS handles and one fix for proper handling of corrupted media" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: saner calling conventions for udf_new_inode() udf: fix the udf_iget() vs. udf_new_inode() races udf: merge the pieces inserting a new non-directory object into directory udf: Set i_generation field udf: Properly detect stale inodes udf: Make udf_read_inode() and udf_iget() return error udf: Avoid infinite loop when processing indirect ICBs udf: Fold udf_fill_inode() into __udf_read_inode() udf: Avoid dir link count to go negative
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs/smb3 fixes from Steve French: "This includes various cifs and smb3 bug fixes including those for bugs found with the recently updated xfstests. Also I am working fixes for two additional cifs problems found by xfstests which I plan to send later (when reviewed and run additional tests)" * 'for-next-3.17' of git://git.samba.org/sfrench/cifs-2.6: Clarify Kconfig help text for CIFS and SMB2/SMB3 CIFS: Fix wrong filename length for SMB2 CIFS: Fix wrong restart readdir for SMB1 CIFS: Fix directory rename error cifs: No need to send SIGKILL to demux_thread during umount cifs: Allow directIO read/write during cache=strict cifs: remove unneeded check of null checking in if condition cifs: fix a possible use of uninit variable in SMB2_sess_setup cifs: fix memory leak when password is supplied multiple times cifs: fix a possible null pointer deref in decode_ascii_ssetup Trivial whitespace fix
-
- 09 Sep, 2014 6 commits
-
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull arch/microblaze fixes from Michal Simek: - Kconfig menu structure fix - fix number of syscalls - fix compilation warnings from allmodconfig * tag 'microblaze-3.17-rc5' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix number of syscalls microblaze: Rename Advance setup to Kernel features microblaze: Add mm/Kconfig to advance menu arch/microblaze/include/asm/uaccess.h: Use pr_devel() instead of pr_debug() arch/microblaze/include/asm/entry.h: Include "linux/linkage.h" to avoid compiling issue
-
Michal Simek authored
Number of syscalls have to be updated too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Michal Simek authored
"Advance setup: menu is misleading that's why rename it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Michal Simek authored
mm/Kconfig is getting too big to be in root menu. Move it to submenu. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Chen Gang authored
When DYNAMIC_DEBUG enabled, pr_debug() depends on KBUILD_MODNAME which also depends on the modules number in Makefile. The related information in "scripts/Makefile.lib" line 94: # $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will # end up in (or would, if it gets compiled in) # Note: Files that end up in two or more modules are compiled without the # KBUILD_MODNAME definition. The reason is that any made-up name would # differ in different configs. For this case, 'radio-si470x-i2c.o' and 'radio-si470x-common.o' are in one line, so cause compiling issue. And 'uaccess.h' is a common shared header (not specially for drivers), so use pr_devel() instead of is OK. The related error with allmodconfig: CC [M] drivers/media/radio/si470x/radio-si470x-i2c.o CC [M] drivers/media/radio/si470x/radio-si470x-common.o In file included from include/linux/printk.h:257:0, from include/linux/kernel.h:13, from drivers/media/radio/si470x/radio-si470x.h:29, from drivers/media/radio/si470x/radio-si470x-common.c:115: ./arch/microblaze/include/asm/uaccess.h: In function 'access_ok': include/linux/dynamic_debug.h:66:14: error: 'KBUILD_MODNAME' undeclared (first use in this function) .modname = KBUILD_MODNAME, \ ^ include/linux/dynamic_debug.h:76:2: note: in expansion of macro 'DEFINE_DYNAMIC_DEBUG_METADATA' DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ ^ include/linux/printk.h:263:2: note: in expansion of macro 'dynamic_pr_debug' dynamic_pr_debug(fmt, ##__VA_ARGS__) ^ ./arch/microblaze/include/asm/uaccess.h:101:3: note: in expansion of macro 'pr_debug' pr_debug("ACCESS fail: %s at 0x%08x (size 0x%x), seg 0x%08x\n", ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
Chen Gang authored
"entry.h" needs 'asmlinkage', and "asm/linkage.h" does not provide it. So need include "linux/linkage.h" to use generic one instead of. The related error (with allmodconfig under microblaze): CC [M] drivers/net/ethernet/emulex/benet/be_main.o In file included from ./arch/microblaze/include/asm/processor.h:17:0, from include/linux/prefetch.h:14, from drivers/net/ethernet/emulex/benet/be_main.c:18: ./arch/microblaze/include/asm/entry.h:33:19: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' extern asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
- 08 Sep, 2014 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bugfix from Ted Ts'o. [ Hmm. It's possible we should make kfree() aware of error pointers, and use IS_ERR_OR_NULL rather than a NULL check. But in the meantime this is obviously the right fix. - Linus ] * 'for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid trying to kfree an ERR_PTR pointer
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd bugfixes from Bruce Fields: "A couple minor nfsd bugfixes" * 'for-3.17' of git://linux-nfs.org/~bfields/linux: lockd: fix rpcbind crash on lockd startup failure nfsd4: fix rd_dircount enforcement
-
J. Bruce Fields authored
Nikita Yuschenko reported that booting a kernel with init=/bin/sh and then nfs mounting without portmap or rpcbind running using a busybox mount resulted in: # mount -t nfs 10.30.130.21:/opt /mnt svc: failed to register lockdv1 RPC service (errno 111). lockd_up: makesock failed, error=-111 Unable to handle kernel paging request for data at address 0x00000030 Faulting instruction address: 0xc055e65c Oops: Kernel access of bad area, sig: 11 [#1] MPC85xx CDS Modules linked in: CPU: 0 PID: 1338 Comm: mount Not tainted 3.10.44.cge #117 task: cf29cea0 ti: cf35c000 task.ti: cf35c000 NIP: c055e65c LR: c0566490 CTR: c055e648 REGS: cf35dad0 TRAP: 0300 Not tainted (3.10.44.cge) MSR: 00029000 <CE,EE,ME> CR: 22442488 XER: 20000000 DEAR: 00000030, ESR: 00000000 GPR00: c05606f4 cf35db80 cf29cea0 cf0ded80 cf0dedb8 00000001 1dec3086 00000000 GPR08: 00000000 c07b1640 00000007 1dec3086 22442482 100b9758 00000000 10090ae8 GPR16: 00000000 000186a5 00000000 00000000 100c3018 bfa46edc 100b0000 bfa46ef0 GPR24: cf386ae0 c07834f0 00000000 c0565f88 00000001 cf0dedb8 00000000 cf0ded80 NIP [c055e65c] call_start+0x14/0x34 LR [c0566490] __rpc_execute+0x70/0x250 Call Trace: [cf35db80] [00000080] 0x80 (unreliable) [cf35dbb0] [c05606f4] rpc_run_task+0x9c/0xc4 [cf35dbc0] [c0560840] rpc_call_sync+0x50/0xb8 [cf35dbf0] [c056ee90] rpcb_register_call+0x54/0x84 [cf35dc10] [c056f24c] rpcb_register+0xf8/0x10c [cf35dc70] [c0569e18] svc_unregister.isra.23+0x100/0x108 [cf35dc90] [c0569e38] svc_rpcb_cleanup+0x18/0x30 [cf35dca0] [c0198c5c] lockd_up+0x1dc/0x2e0 [cf35dcd0] [c0195348] nlmclnt_init+0x2c/0xc8 [cf35dcf0] [c015bb5c] nfs_start_lockd+0x98/0xec [cf35dd20] [c015ce6c] nfs_create_server+0x1e8/0x3f4 [cf35dd90] [c0171590] nfs3_create_server+0x10/0x44 [cf35dda0] [c016528c] nfs_try_mount+0x158/0x1e4 [cf35de20] [c01670d0] nfs_fs_mount+0x434/0x8c8 [cf35de70] [c00cd3bc] mount_fs+0x20/0xbc [cf35de90] [c00e4f88] vfs_kern_mount+0x50/0x104 [cf35dec0] [c00e6e0c] do_mount+0x1d0/0x8e0 [cf35df10] [c00e75ac] SyS_mount+0x90/0xd0 [cf35df40] [c000ccf4] ret_from_syscall+0x0/0x3c The addition of svc_shutdown_net() resulted in two calls to svc_rpcb_cleanup(); the second is no longer necessary and crashes when it calls rpcb_register_call with clnt=NULL. Reported-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru> Fixes: 679b033d "lockd: ensure we tear down any live sockets when socket creation fails during lockd_up" Cc: stable@vger.kernel.org Acked-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
J. Bruce Fields authored
Commit 3b299709 "nfsd4: enforce rd_dircount" totally misunderstood rd_dircount; it refers to total non-attribute bytes returned, not number of directory entries returned. Bring the code into agreement with RFC 3530 section 14.2.24. Cc: stable@vger.kernel.org Fixes: 3b299709 "nfsd4: enforce rd_dircount" Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "A bug fix for the vdso code, the loadparm for booting from SCSI is added and the access permissions for the dasd module parameters are corrected" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vdso: remove NULL pointer check from clock_gettime s390/ipl: Add missing SCSI loadparm attributes to /sys/firmware s390/dasd: Make module parameter visible in sysfs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: "This pull request includes Alban's patch to disallow '\n' in cgroup names. Two other patches from Li to fix a possible oops when cgroup destruction races against other file operations and one from Vivek to fix a unified hierarchy devel behavior" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: check cgroup liveliness before unbreaking kernfs cgroup: delay the clearing of cgrp->kn->priv cgroup: Display legacy cgroup files on default hierarchy cgroup: reject cgroup names with '\n'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
Pull percpu fixes from Tejun Heo: "One patch to fix a failure path in the alloc path. The bug is dangerous but probably not too likely to actually trigger in the wild given that there hasn't been any report yet. The other two are low impact fixes" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: free percpu allocation info for uniprocessor system percpu: perform tlb flush after pcpu_map_pages() failure percpu: fix pcpu_alloc_pages() failure path
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "Two patches are to add PCI IDs for ICH9 and all others are device specific fixes. Nothing too interesting" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver. ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware. ahci: add pcid for Marvel 0x9182 controller ata: Disabling the async PM for JMicron chip 363/361 ata_piix: Add Device IDs for Intel 9 Series PCH ahci: Add Device IDs for Intel 9 Series PCH ata: ahci_tegra: Read calibration fuse
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix skb leak in mac802154, from Martin Townsend 2) Use select not depends on NF_NAT for NFT_NAT, from Pablo Neira Ayuso 3) Fix union initializer bogosity in vxlan, from Gerhard Stenzel 4) Fix RX checksum configuration in stmmac driver, from Giuseppe CAVALLARO 5) Fix TSO with non-accelerated VLANs in e1000, e1000e, bna, ehea, i40e, i40evf, mvneta, and qlge, from Vlad Yasevich 6) Fix capability checks in phy_init_eee(), from Giuseppe CAVALLARO 7) Try high order allocations more sanely for SKBs, specifically if a high order allocation fails, fall back directly to zero order pages rather than iterating down one order at a time. From Eric Dumazet 8) Fix a memory leak in openvswitch, from Li RongQing 9) amd-xgbe initializes wrong spinlock, from Thomas Lendacky 10) RTNL locking was busted in setsockopt for anycast and multicast, fix from Sabrina Dubroca 11) Fix peer address refcount leak in ipv6, from Nicolas Dichtel 12) DocBook typo fixes, from Masanari Iida * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits) ipv6: restore the behavior of ipv6_sock_ac_drop() amd-xgbe: Enable interrupts for all management counters amd-xgbe: Treat certain counter registers as 64 bit greth: moved TX ring cleaning to NAPI rx poll func cnic : Cleanup CONFIG_IPV6 & VLAN check net: treewide: Fix typo found in DocBook/networking.xml bnx2x: Fix link problems for 1G SFP RJ45 module 3c59x: avoid panic in boomerang_start_xmit when finding page address: netfilter: add explicit Kconfig for NETFILTER_XT_NAT ipv6: use addrconf_get_prefix_route() to remove peer addr ipv6: fix a refcnt leak with peer addr net-timestamp: only report sw timestamp if reporting bit is set drivers/net/fddi/skfp/h/skfbi.h: Remove useless PCI_BASE_2ND macros l2tp: fix race while getting PMTU on PPP pseudo-wire ipv6: fix rtnl locking in setsockopt for anycast and multicast VMXNET3: Check for map error in vmxnet3_set_mc openvswitch: distinguish between the dropped and consumed skb amd-xgbe: Fix initialization of the wrong spin lock openvswitch: fix a memory leak netfilter: fix missing dependencies in NETFILTER_XT_TARGET_LOG ...
-
- 07 Sep, 2014 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== pull request: wireless 2014-09-05 Please pull this batch of fixes intended for the 3.17 stream... For the mac80211 bits, Johannes says: "Here are a few fixes for mac80211. One has been discussed for a while and adds a terminating NUL-byte to the alpha2 sent to userspace, which shouldn't be necessary but since many places treat it as a string we couldn't move to just sending two bytes. In addition to that, we have two VLAN fixes from Felix, a mesh fix, a fix for the recently introduced RX aggregation offload, a revert for a broken patch (that luckily didn't really cause any harm) and a small fix for alignment in debugfs." For the iwlwifi bits, Emmanuel says: "I revert a patch that disabled CTS to self in dvm because users reported issues. The revert is CCed to stable since the offending patch was sent to stable too. I also bump the firmware API versions since a new firmware is coming up. On top of that, Marcel fixes a bug I introduced while fixing a bug in our Kconfig file." Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
It is possible that the interface is already gone after joining the list of anycast on this interface as we don't hold a refcount for the device, in this case we are safe to ignore the error. What's more important, for API compatibility we should not change this behavior for applications even if it were correct. Fixes: commit a9ed4a29 ("ipv6: fix rtnl locking in setsockopt for anycast and multicast") Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
Sudip Mukherjee authored
new link for - How to piss off a Linux kernel subsystem maintainer Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Bolle authored
The NFS/RDMA Kconfig symbol was split into separate options for client and server in commit 2e8c12e1 ("xprtrdma: add separate Kconfig options for NFSoRDMA client and server support"). Update the documentation to reflect this split. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "J. Bruce Fields" <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Masanari Iida authored
hpfall.c was renamed to freefall.c in 3.16, but this file still refer to hpfall.c instead of freefall.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jose Manuel Alarcon Roldan authored
The example code provided with the i2c device interface documentation won't compile since it uses the reserved word "register" to name a variable. The compiler fails with this error message: error: expected identifier or '(' before '=' token __u8 register = 0x20; /* Device register to access */ ^ Rename the variable "register" to simply "reg" in the example code. Another couple of typos has been fixed as well. [Change "! =" to "!=".] Signed-off-by: Jose Alarcon Roldan <jose.alarcon.roldan@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rob Jones authored
Despite the fact that these functions have been around for years, they are little used (only 15 uses in 13 files at the preseht time) even though many other files use work-arounds to achieve the same result. By documenting them, hopefully they will become more widely used. Signed-off-by: Rob Jones <rob.jones@codethink.co.uk> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: "These are regression fixes (ACPI sysfs, ACPI video, suspend test), ACPI cpuidle deadlock fix, missing runtime validation of ACPI _DSD output, a fix and a new CPU ID for the RAPL driver, new blacklist entry for the ACPI EC driver and a couple of trivial cleanups (intel_pstate and generic PM domains). Specifics: - Fix for recently broken test_suspend= command line argument (Rafael Wysocki). - Fixes for regressions related to the ACPI video driver caused by switching the default to native backlight handling in 3.16 from Hans de Goede. - Fix for a sysfs attribute of ACPI device objects that returns stale values sometimes due to the fact that they are cached instead of executing the appropriate method (_SUN) every time (broken in 3.14). From Yasuaki Ishimatsu. - Fix for a deadlock between cpuidle_lock and cpu_hotplug.lock in the ACPI processor driver from Jiri Kosina. - Runtime output validation for the ACPI _DSD device configuration object missing from the support for it that has been introduced recently. From Mika Westerberg. - Fix for an unuseful and misleading RAPL (Running Average Power Limit) domain detection message in the RAPL driver from Jacob Pan. - New Intel Haswell CPU ID for the RAPL driver from Jason Baron. - New Clevo W350etq blacklist entry for the ACPI EC driver from Lan Tianyu. - Cleanup for the intel_pstate driver and the core generic PM domains code from Gabriele Mazzotta and Geert Uytterhoeven" * tag 'pm+acpi-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock ACPI / scan: not cache _SUN value in struct acpi_device_pnp cpufreq: intel_pstate: Remove unneeded variable powercap / RAPL: change domain detection message powercap / RAPL: add support for CPU model 0x3f PM / domains: Make generic_pm_domain.name const PM / sleep: Fix test_suspend= command line option ACPI / EC: Add msi quirk for Clevo W350etq ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull filesystem fixes from Al Viro: "Several bugfixes (all of them -stable fodder). Alexey's one deals with double mutex_lock() in UFS (apparently, nobody has tried to test "ufs: sb mutex merge + mutex_destroy" on something like file creation/removal on ufs). Mine deal with two kinds of umount bugs, in umount propagation and in handling of automounted submounts, both resulting in bogus transient EBUSY from umount" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: fix deadlocks introduced by sb mutex merge fix EBUSY on umount() from MNT_SHRINKABLE get rid of propagate_umount() mistakenly treating slaves as busy.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU fix from Ingo Molnar: "A boot hang fix for the offloaded callback RCU model (RCU_NOCB_CPU=y && (TREE_CPU=y || TREE_PREEMPT_RC)) in certain bootup scenarios" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Make nocb leader kthreads process pending callbacks after spawning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Three fixlets from the timer departement: - Update the timekeeper before updating vsyscall and pvclock. This fixes the kvm-clock regression reported by Chris and Paolo. - Use the proper irq work interface from NMI. This fixes the regression reported by Catalin and Dave. - Clarify the compat_nanosleep error handling mechanism to avoid future confusion" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Update timekeeper before updating vsyscall and pvclock compat: nanosleep: Clarify error handling nohz: Restore NMI safe local irq work for local nohz kick
-
Alexey Khoroshilov authored
Commit 0244756e ("ufs: sb mutex merge + mutex_destroy") introduces deadlocks in ufs_new_inode() and ufs_free_inode(). Most callers of that functions acqure the mutex by themselves and ufs_{new,free}_inode() do that via lock_ufs(), i.e we have an unavoidable double lock. The patch proposes to resolve the issue by making sure that ufs_{new,free}_inode() are not called with the mutex held. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 06 Sep, 2014 3 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "A smattering of bug fixes across most architectures" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: powerpc/kvm/cma: Fix panic introduces by signed shift operation KVM: s390/mm: Fix guest storage key corruption in ptep_set_access_flags KVM: s390/mm: Fix storage key corruption during swapping arm/arm64: KVM: Complete WFI/WFE instructions ARM/ARM64: KVM: Nuke Hyp-mode tlbs before enabling MMU KVM: s390/mm: try a cow on read only pages for key ops KVM: s390: Fix user triggerable bug in dead code
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Kevin Hilman: "Another round of fixes from arm-soc land, which are mostly DT fixes for: - OMAP: handful of DT fixes devices on newly supported hardware - davinci: fix 2nd EDMA channel - ux500: extend previous pinctrl fix to another board - at91: clock registration fixes, compatibility string precision And one more fix for event cleanup in drivers/bus/arm-ccn" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: bus: arm-ccn: Move event cleanup routine ARM: at91/dt: rm9200: fix usb clock definition ARM: at91: rm9200: fix clock registration ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver ARM: dts: dra7-evm: Add vtt regulator support ARM: dts: dra7-evm: Fix spi1 mux documentation ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am4372: fix USB regs size ARM: dts: am437x-gp: switch i2c0 to 100KHz ARM: dts: dra7-evm: Fix 8th NAND partition's name ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency ARM: ux500: disable msp2 node on Snowball ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfsLinus Torvalds authored
Pull xfs fixes from Dave Chinner: "The fixes all address recently discovered data corruption issues. The original Direct IO issue was discovered by Chris Mason @ Facebook on a production workload which mixed buffered reads with direct reads and writes IO to the same file. The fix for that exposed other issues with page invalidation (exposed by millions of fsx operations) failing due to dirty buffers beyond EOF. Finally, the collapse_range code could also cause problems due to racing writeback changing the extent map while it was being shifted around. The commits for that problem are simple mitigation fixes that prevent the problem from occuring. A more robust fix for 3.18 that addresses the underlying problem is currently being worked on by Brian. Summary of fixes: - a direct IO read/buffered read data corruption - the associated fallout from the DIO data corruption fix - collapse range bugs that are potential data corruption issues" * tag 'xfs-for-linus-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: trim eofblocks before collapse range xfs: xfs_file_collapse_range is delalloc challenged xfs: don't log inode unless extent shift makes extent modifications xfs: use ranged writeback and invalidation for direct IO xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't dirty buffers beyond EOF
-