- 05 May, 2016 19 commits
-
-
Dave Airlie authored
This is just a type-safety things to avoid everyone taking void *, it doesn't change anything. v2: agd5f: split out the dal changes into a separate patch. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Arindam Nath authored
Change History -------------- v2: - Make firmware version check correctly. Firmware versions >= 1.80 should all support 40 UVD instances. - Replace AMDGPU_MAX_UVD_HANDLES with max_handles variable. v1: - The firmware can handle upto 40 UVD sessions. Signed-off-by:
Arindam Nath <arindam.nath@amd.com> Signed-off-by:
Ayyappa Chandolu <ayyappa.chandolu@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Nils Wallménius authored
These tables were initialized on stack on each call, avoid that and save a little bit of text size. Reviewed-by:
Nils Wallménius <nils.wallmenius@gmail.com> Signed-off-by:
-
Nils Wallménius authored
Also adjust phm_construct_table to take a const pointer Reviewed-by:
-
Nils Wallménius authored
As these arrays were of pointer to pointer type, they were pointer to pointer to const. Make them pointer to const pointer to const. Reviewed-by:
-
Nils Wallménius authored
All these are compile time constand and the drm_debugfs_create/remove_files functions take a const pointer argument. Reviewed-by:
-
Nils Wallménius authored
This marks the struct amdgpu_sched_ops const and adjusts amd_sched_init to take a const pointer for the ops param. The ops member of struct amd_gpu_scheduler is also changed to const. Reviewed-by:
-
Nils Wallménius authored
This patch marks some compile-time constant tables 'const'. The tables marked in this patch are the low hanging fruit where little other changes were necesary to avoid casting away constness etc. Also mark some tables that are private to a file as static. Reviewed-by:
-
Alex Deucher authored
Stale ifdef. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Dave Airlie authored
This adds support to the command parser for the set append counter packet3, this is required to support atomic counters on evergreen/cayman GPUs. v2: fixup some of the hardcoded numbers with real register names (Christian) Reviewed-by:
-
Arindam Nath authored
Signed-off-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
Arindam Nath authored
Signed-off-by:
-
Christian König authored
If we don't need to flush we can easily use another VMID already assigned to the process. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
-
Christian König authored
This way we can track when the flush is done. Signed-off-by:
-
Christian König authored
v2: rebase & cleanup This way we can store more than one fence as user for each VMID. Signed-off-by:
-
Christian König authored
No need to have two of them any more. Signed-off-by:
-
Andrey Grodzovsky authored
Also add some pflip debug prints. This change allows us to wait on pflip status until the new surface address is actually submitted to the register. This reverts ed3020e923240829dcdfd3343f6e91dc02c63775 drm/amdgpu: Move MMIO flip out of spinlocked region The original change assumed DAL will aquire locks inside DAL implemetion of page_flip callback which eventaully didn't happen. This moves the flip before status update which makes sense for the non-DAL code pathes as well. Signed-off-by:
Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by:
-
Michel Dänzer authored
When this flag is set, we program the hardware to execute the flip during horizontal blank (i.e. for the next scanline) instead of during vertical blank (i.e. for the next frame). Currently this is only supported on ASICs which have a page flip completion interrupt (>= R600), and only if the use_pflipirq parameter has value 2 (the default). Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Eric Huang authored
Add a proper implementation for setting the deep sleep divider. Signed-off-by:
Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by:
-
- 02 May, 2016 21 commits
-
-
Christian König authored
Keeping the pages array around can use a lot of system memory when you want a large GART. Signed-off-by:
-
Christian König authored
Not needed any more. Signed-off-by:
-
Christian König authored
Signed-off-by:
-
Christian König authored
Make it more flexible by passing src and page addresses directly instead of the structures they contain. Signed-off-by:
-
Christian König authored
As far as I can see that isn't neccessary any more. Signed-off-by:
-
Rex Zhu authored
This comes from the display handling code. Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
-
Tom St Denis authored
This patch enables clockgating for the UVD6 block in Stoney. Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Tom St Denis authored
This patch enables clock gating for the UVD5 block with Tonga. Signed-off-by:
-
Tom St Denis authored
This patch adds support for software clock gating to UVD 5 and UVD 6 blocks with a preliminary commented out hardware gating routine. Currently hardware gating does not work so it's not activated. Signed-off-by:
-
Nicolai Stange authored
The values of all but the RADEON_HPD_NONE members of the radeon_hpd_id enum transform 1:1 into bit positions within the 'enabled' bitset as assembled by evergreen_hpd_init(): enabled |= 1 << radeon_connector->hpd.hpd; However, if ->hpd.hpd happens to equal RADEON_HPD_NONE == 0xff, UBSAN reports UBSAN: Undefined behaviour in drivers/gpu/drm/radeon/evergreen.c:1867:16 shift exponent 255 is too large for 32-bit type 'int' [...] Call Trace: [<ffffffff818c4d35>] dump_stack+0xbc/0x117 [<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169 [<ffffffff819411bb>] ubsan_epilogue+0xd/0x4e [<ffffffff81941cbc>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254 [<ffffffffa0ba7f2e>] ? atom_execute_table+0x3e/0x50 [radeon] [<ffffffff81941ac1>] ? __ubsan_handle_load_invalid_value+0x158/0x158 [<ffffffffa0b87700>] ? radeon_get_pll_use_mask+0x130/0x130 [radeon] [<ffffffff81219930>] ? wake_up_klogd_work_func+0x60/0x60 [<ffffffff8121a35e>] ? vprintk_default+0x3e/0x60 [<ffffffffa0c603c4>] evergreen_hpd_init+0x274/0x2d0 [radeon] [<ffffffffa0c603c4>] ? evergreen_hpd_init+0x274/0x2d0 [radeon] [<ffffffffa0bd196e>] radeon_modeset_init+0x8ce/0x18d0 [radeon] [<ffffffffa0b71d86>] radeon_driver_load_kms+0x186/0x350 [radeon] [<ffffffffa03b6b16>] drm_dev_register+0xc6/0x100 [drm] [<ffffffffa03bc8c4>] drm_get_pci_dev+0xe4/0x490 [drm] [<ffffffff814b83f0>] ? kfree+0x220/0x370 [<ffffffffa0b687c2>] radeon_pci_probe+0x112/0x140 [radeon] [...] ===================================================================== radeon 0000:01:00.0: No connectors reported connected with modes At least on x86, there should be no user-visible impact as there 1 << 0xff == 1 << (0xff & 31) == 1 << 31 holds and 31 > RADEON_MAX_HPD_PINS. Thus, this patch is a cosmetic one. All of the above applies analogously to evergreen_hpd_fini(), r100_hpd_init(), r100_hpd_fini(), r600_hpd_init(), r600_hpd_fini(), rs600_hpd_init() and rs600_hpd_fini() Silence UBSAN by checking ->hpd.hpd for RADEON_HPD_NONE before oring it into the 'enabled' bitset in the *_init()- or the 'disabled' bitset in the *_fini()-functions respectively. Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
-
Rex Zhu authored
White space fix. Signed-off-by:
-
Rex Zhu authored
This is not a fatal error. v2: add comment why ignore the error here. Signed-off-by:
-
Rex Zhu authored
Need to soft reset VCE as part of the clockgating sequence. Signed-off-by:
-
Monk Liu authored
this is to fix fatal page fault error that occured if: job is signaled/released after its timeout work is already put to the global queue (in this case the cancel_delayed_work will return false), which will lead to NX-protection error page fault during job_timeout_func. Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
-
Monk Liu authored
Add two callbacks to scheduler to maintain jobs, and invoked for job timeout calculations. Now TDR measures time gap from job is processed by hw. v2: fix typo Signed-off-by:
-
Monk Liu authored
original time out detect routine is incorrect, cuz it measures the gap from job scheduled, but we should only measure the gap from processed by hw. Signed-off-by:
-
Monk Liu authored
the mirror_list will be used for later time out detect feature. This is needed to properly detect a GPU timeout with the scheduler. Signed-off-by:
-
Monk Liu authored
for those jobs submitted through scheduler, do not free it immediately after scheduled, instead free it in global workqueue by its sched fence signaling callback function. v2: call uf's bo_undef after job_run() call job's sync free after job_run() no static inline __amdgpu_job_free() anymore, just use kfree(job) to replace it. Signed-off-by:
-
Vitaly Prosyak authored
Fixed mc stop and resume hardware programming sequence. Signed-off-by:
Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by:
-
Monk Liu authored
Consolidate job initialization in one place rather than duplicating it in multiple places. Signed-off-by:
-
Monk Liu authored
More ground work for conditional execution on SDMA necessary for preemption. Signed-off-by:
-
