- 15 May, 2020 21 commits
-
-
Emil Velikov authored
With earlier commits, the API no longer discards the const-ness of the sysrq_key_op. As such we can add the notation. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://lore.kernel.org/r/20200513214351.2138580-7-emil.l.velikov@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Emil Velikov authored
With earlier commits, the API no longer discards the const-ness of the sysrq_key_op. As such we can add the notation. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://lore.kernel.org/r/20200513214351.2138580-6-emil.l.velikov@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Emil Velikov authored
With earlier commits, the API no longer discards the const-ness of the sysrq_key_op. As such we can add the notation. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://lore.kernel.org/r/20200513214351.2138580-5-emil.l.velikov@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Emil Velikov authored
With earlier commits, the API no longer discards the const-ness of the sysrq_key_op. As such we can add the notation. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: linux-alpha@vger.kernel.org Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://lore.kernel.org/r/20200513214351.2138580-4-emil.l.velikov@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Emil Velikov authored
All the users threat them as immutable - annotate them as such. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://lore.kernel.org/r/20200513214351.2138580-3-emil.l.velikov@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Emil Velikov authored
The user is not supposed to thinker with the underlying sysrq_key_op. Make that explicit by adding a handful of const notations. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://lore.kernel.org/r/20200513214351.2138580-2-emil.l.velikov@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Emil Velikov authored
Export a pointer to the sysrq_get_key_op(). This way we can cleanly unregister it, instead of the current solutions of modifuing it inplace. Since __sysrq_get_key_op() is no longer used externally, let's make it a static function. This patch will allow us to limit access to each and every sysrq op and constify the sysrq handling. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: linux-alpha@vger.kernel.org Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://lore.kernel.org/r/20200513214351.2138580-1-emil.l.velikov@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason Yan authored
No other functions use the return value of mxser_change_speed() and the return value is always 0 now. Make it return void. This fixes the following coccicheck warning: drivers/tty/mxser.c:645:5-8: Unneeded variable: "ret". Return "0" on line 650 Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200506061735.19369-1-yanaijie@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serge Semin authored
Standard 8250 UART ports are designed in a way so they can communicate with baud rates up to 1/16 of a reference frequency. It's expected from most of the currently supported UART controllers. That's why the former version of serial8250_get_baud_rate() method called uart_get_baud_rate() with min and max baud rates passed as (port->uartclk / 16 / UART_DIV_MAX) and ((port->uartclk + tolerance) / 16) respectively. Doing otherwise, like it was suggested in commit ("serial: 8250_mtk: support big baud rate."), caused acceptance of bauds, which was higher than the normal UART controllers actually supported. As a result if some user-space program requested to set a baud greater than (uartclk / 16) it would have been permitted without truncation, but then serial8250_get_divisor(baud) (which calls uart_get_divisor() to get the reference clock divisor) would have returned a zero divisor. Setting zero divisor will cause an unpredictable effect varying from chip to chip. In case of DW APB UART the communications just stop. Lets fix this problem by getting back the limitation of (uartclk + tolerance) / 16 maximum baud supported by the generic 8250 port. Mediatek 8250 UART ports driver developer shouldn't have touched it in the first place notably seeing he already provided a custom version of set_termios() callback in that glue-driver which took into account the extended baud rate values and accordingly updated the standard and vendor-specific divisor latch registers anyway. Fixes: 81bb549f ("serial: 8250_mtk: support big baud rate.") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Long Cheng <long.cheng@mediatek.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-mips@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Link: https://lore.kernel.org/r/20200506233136.11842-2-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Wunner authored
We're about to amend uart_get_rs485_mode() to support a GPIO pin for rs485 bus termination. Retrieving the GPIO descriptor may fail, so allow uart_get_rs485_mode() to return an errno and change all callers to check for failure. The GPIO descriptor is going to be stored in struct uart_port. Pass that struct to uart_get_rs485_mode() in lieu of a struct device and struct serial_rs485, both of which are directly accessible from struct uart_port. A few drivers call uart_get_rs485_mode() before setting the struct device pointer in struct uart_port. Shuffle those calls around where necessary. [Heiko Stuebner did the ar933x_uart.c portion, hence his Signed-off-by.] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/271e814af4b0db3bffbbb74abf2b46b75add4516.1589285873.git.lukas@wunner.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Wunner authored
If the call to uart_add_one_port() in serial8250_register_8250_port() fails, a half-initialized entry in the serial_8250ports[] array is left behind. A subsequent reprobe of the same serial port causes that entry to be reused. Because uart->port.dev is set, uart_remove_one_port() is called for the half-initialized entry and bails out with an error message: bcm2835-aux-uart 3f215040.serial: Removing wrong port: (null) != (ptrval) The same happens on failure of mctrl_gpio_init() since commit 4a96895f ("tty/serial/8250: use mctrl_gpio helpers"). Fix by zeroing the uart->port.dev pointer in the probe error path. The bug was introduced in v2.6.10 by historical commit befff6f5 ("[SERIAL] Add new port registration/unregistration functions."): https://git.kernel.org/tglx/history/c/befff6f5bf5f The commit added an unconditional call to uart_remove_one_port() in serial8250_register_port(). In v3.7, commit 835d844d ("8250_pnp: do pnp probe before legacy probe") made that call conditional on uart->port.dev which allows me to fix the issue by zeroing that pointer in the error path. Thus, the present commit will fix the problem as far back as v3.7 whereas still older versions need to also cherry-pick 835d844d. Fixes: 835d844d ("8250_pnp: do pnp probe before legacy probe") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v2.6.10 Cc: stable@vger.kernel.org # v2.6.10: 835d844d: 8250_pnp: do pnp probe before legacy Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/b4a072013ee1a1d13ee06b4325afb19bda57ca1b.1589285873.git.lukas@wunner.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gregory CLEMENT authored
Warn the upper layer when n_gms is ready to receive data again. Without this the associated virtual tty remains blocked indefinitely. Fixes: e1eaea46 ("tty: n_gsm line discipline") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20200512115323.1447922-4-gregory.clement@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gregory CLEMENT authored
For at least some modems like the TELIT LE910, skipping SOF makes transfers blocking indefinitely after a short amount of data transferred. Given the small improvement provided by skipping the SOF (just one byte on about 100 bytes), it seems better to completely remove this "feature" than make it optional. Fixes: e1eaea46 ("tty: n_gsm line discipline") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20200512115323.1447922-3-gregory.clement@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gregory CLEMENT authored
Use appropriate print helpers for debug messages. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20200512115323.1447922-2-gregory.clement@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anson Huang authored
RX irq is required, so add return value check for platform_get_irq(). Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1589180996-618-1-git-send-email-Anson.Huang@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Shevchenko authored
Since PCI core provides a generic PCI_DEVICE_DATA() macro, replace contents of EXAR_DEVICE() with former one. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200512140252.67631-1-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manivannan Sadhasivam authored
STM32 UART controllers have the built in modem control support using dedicated gpios which can be enabled using 'st,hw-flow-ctrl' flag in DT. But there might be cases where the board design need to use different gpios for modem control. For supporting such cases, this commit adds modem control gpio support to STM32 UART controller using mctrl_gpio driver. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Link: https://lore.kernel.org/r/20200420170204.24541-3-mani@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manivannan Sadhasivam authored
Document the use of CTS/RTS gpios for flow control in STM32 UART controller. These properties can be used instead of 'st,hw-flow-ctrl' for making use of any gpio pins for flow control instead of dedicated pins. It should be noted that both CTS/RTS and 'st,hw-flow-ctrl' properties cannot co-exist in a design. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200420170204.24541-2-mani@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonathan Bakker authored
Some variants of the samsung tty driver can pick which clock to use for their baud rate generation. In the DT conversion, a default clock was selected to be used if a specific one wasn't assigned and then a comparison of which clock rate worked better was done. Unfortunately, the comparison was implemented in such a way that only the default clock was ever actually compared. Fix this by iterating through all possible clocks, except when a specific clock has already been picked via clk_sel (which is only possible via board files). Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/BN6PR04MB06604E63833EA41837EBF77BA3A30@BN6PR04MB0660.namprd04.prod.outlook.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rahul Tanwar authored
Add changes so Lantiq serial driver can be compiled as a module. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/ad9422de006c317401bfa5fe61bdd4293dd29b5e.1589176044.git.rahul.tanwar@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rahul Tanwar authored
Lantiq UART driver can be used for system console. Add changes to make this driver's use as console selectable/configurable. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/35f2d002ba1cb26192fe4d9b8cdab275300705bc.1589176044.git.rahul.tanwar@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 May, 2020 1 commit
-
-
Greg Kroah-Hartman authored
This reverts commit e2bd1dcb. In discussion on the mailing list, it has been determined that this is not the correct type of fix for this issue. Revert it so that we can do this correctly. Reported-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org Cc: Raghavendra Rao Ananta <rananta@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 May, 2020 1 commit
-
-
Greg Kroah-Hartman authored
We need the tty fixes in here too. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 May, 2020 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Ensure that direct mapping alias is always flushed when changing page attributes. The optimization for small ranges failed to do so when the virtual address was in the vmalloc or module space. - Unbreak the trace event registration for syscalls without arguments caused by the refactoring of the SYSCALL_DEFINE0() macro. - Move the printk in the TSC deadline timer code to a place where it is guaranteed to only be called once during boot and cannot be rearmed by clearing warn_once after boot. If it's invoked post boot then lockdep rightfully complains about a potential deadlock as the calling context is different. - A series of fixes for objtool and the ORC unwinder addressing variety of small issues: - Stack offset tracking for indirect CFAs in objtool ignored subsequent pushs and pops - Repair the unwind hints in the register clearing entry ASM code - Make the unwinding in the low level exit to usermode code stop after switching to the trampoline stack. The unwind hint is no longer valid and the ORC unwinder emits a warning as it can't find the registers anymore. - Fix unwind hints in switch_to_asm() and rewind_stack_do_exit() which caused objtool to generate bogus ORC data. - Prevent unwinder warnings when dumping the stack of a non-current task as there is no way to be sure about the validity because the dumped stack can be a moving target. - Make the ORC unwinder behave the same way as the frame pointer unwinder when dumping an inactive tasks stack and do not skip the first frame. - Prevent ORC unwinding before ORC data has been initialized - Immediately terminate unwinding when a unknown ORC entry type is found. - Prevent premature stop of the unwinder caused by IRET frames. - Fix another infinite loop in objtool caused by a negative offset which was not catched. - Address a few build warnings in the ORC unwinder and add missing static/ro_after_init annotations" * tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES x86/apic: Move TSC deadline timer debug printk ftrace/x86: Fix trace event registration for syscalls without arguments x86/mm/cpa: Flush direct map alias during cpa objtool: Fix infinite loop in for_offset_range() x86/unwind/orc: Fix premature unwind stoppage due to IRET frames x86/unwind/orc: Fix error path for bad ORC entry type x86/unwind/orc: Prevent unwinding before ORC initialization x86/unwind/orc: Don't skip the first frame for inactive tasks x86/unwind: Prevent false warnings for non-current tasks x86/unwind/orc: Convert global variables to static x86/entry/64: Fix unwind hints in rewind_stack_do_exit() x86/entry/64: Fix unwind hints in __switch_to_asm() x86/entry/64: Fix unwind hints in kernel exit path x86/entry/64: Fix unwind hints in register clearing code objtool: Fix stack offset tracking for indirect CFAs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Thomas Gleixner: "A single fix for objtool to prevent an infinite loop in the jump table search which can be triggered when building the kernel with '-ffunction-sections'" * tag 'objtool-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix infinite loop in find_jump_table()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Thomas Gleixner: "A single fix for the fallout of the recent futex uacess rework. With those changes GCC9 fails to analyze arch_futex_atomic_op_inuser() correctly and emits a 'maybe unitialized' warning. While we usually ignore compiler stupidity the conditional store is pointless anyway because the correct case has to store. For the fault case the extra store does no harm" * tag 'locking-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ARM: futex: Address build warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - Race condition fixes for the AMD IOMMU driver. These are five patches fixing two race conditions around increase_address_space(). The first race condition was around the non-atomic update of the domain page-table root pointer and the variable containing the page-table depth (called mode). This is fixed now be merging page-table root and mode into one 64-bit field which is read/written atomically. The second race condition was around updating the page-table root pointer and making it public before the hardware caches were flushed. This could cause addresses to be mapped and returned to drivers which are not reachable by IOMMU hardware yet, causing IO page-faults. This is fixed too by adding the necessary flushes before a new page-table root is published. Related to the race condition fixes these patches also add a missing domain_flush_complete() barrier to update_domain() and a fix to bail out of the loop which tries to increase the address space when the call to increase_address_space() fails. Qian was able to trigger the race conditions under high load and memory pressure within a few days of testing. He confirmed that he has seen no issues anymore with the fixes included here. - Fix for a list-handling bug in the VirtIO IOMMU driver. * tag 'iommu-fixes-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/virtio: Reverse arguments to list_add iommu/amd: Do not flush Device Table in iommu_map_page() iommu/amd: Update Device Table in increase_address_space() iommu/amd: Call domain_flush_complete() in update_domain() iommu/amd: Do not loop forever when trying to increase address space iommu/amd: Fix race in increase_address_space()/fetch_pte()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - a small series fixing a use-after-free of bdi name (Christoph,Yufen) - NVMe fix for a regression with the smaller CQ update (Alexey) - NVMe fix for a hang at namespace scanning error recovery (Sagi) - fix race with blk-iocost iocg->abs_vdebt updates (Tejun) * tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block: nvme: fix possible hang when ns scanning fails during error recovery nvme-pci: fix "slimmer CQ head update" bdi: add a ->dev_name field to struct backing_dev_info bdi: use bdi_dev_name() to get device name bdi: move bdi_dev_name out of line vboxsf: don't use the source name in the bdi name iocost: protect iocg->abs_vdebt with iocg->waitq.lock
-
Linus Torvalds authored
It seems that for whatever reason, gcc-10 ends up not inlining a couple of functions that used to be inlined before. Even if they only have one single callsite - it looks like gcc may have decided that the code was unlikely, and not worth inlining. The code generation difference is harmless, but caused a few new section mismatch errors, since the (now no longer inlined) function wasn't in the __init section, but called other init functions: Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem() Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap() Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap() So add the appropriate __init annotation to make modpost not complain. In both cases there were trivially just a single callsite from another __init function. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 09 May, 2020 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "A smattering of fixes and cleanups: - Dead code removal. - Exporting riscv_cpuid_to_hartid_mask for modules. - Per-CPU tracking of ISA features. - Setting max_pfn correctly when probing memory. - Adding a note to the VDSO so glibc can check the kernel's version without a uname(). - A fix to force the bootloader to initialize the boot spin tables, which still get used as a fallback when SBI-0.1 is enabled" * tag 'riscv-for-linus-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Remove unused code from STRICT_KERNEL_RWX riscv: force __cpu_up_ variables to put in data section riscv: add Linux note to vdso riscv: set max_pfn to the PFN of the last page RISC-V: Remove N-extension related defines RISC-V: Add bitmap reprensenting ISA features common across CPUs RISC-V: Export riscv_cpuid_to_hartid_mask() API
-
Linus Torvalds authored
gcc-10 has started warning about conflicting types for a few new built-in functions, particularly 'free()'. This results in warnings like: crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch] because the crypto layer had its local freeing functions called 'free()'. Gcc-10 is in the wrong here, since that function is marked 'static', and thus there is no chance of confusion with any standard library function namespace. But the simplest thing to do is to just use a different name here, and avoid this gcc mis-feature. [ Side note: gcc knowing about 'free()' is in itself not the mis-feature: the semantics of 'free()' are special enough that a compiler can validly do special things when seeing it. So the mis-feature here is that gcc thinks that 'free()' is some restricted name, and you can't shadow it as a local static function. Making the special 'free()' semantics be a function attribute rather than tied to the name would be the much better model ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
gcc-10 now warns about passing aliasing pointers to functions that take restricted pointers. That's actually a great warning, and if we ever start using 'restrict' in the kernel, it might be quite useful. But right now we don't, and it turns out that the only thing this warns about is an idiom where we have declared a few functions to be "printf-like" (which seems to make gcc pick up the restricted pointer thing), and then we print to the same buffer that we also use as an input. And people do that as an odd concatenation pattern, with code like this: #define sysfs_show_gen_prop(buffer, fmt, ...) \ snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__) where we have 'buffer' as both the destination of the final result, and as the initial argument. Yes, it's a bit questionable. And outside of the kernel, people do have standard declarations like int snprintf( char *restrict buffer, size_t bufsz, const char *restrict format, ... ); where that output buffer is marked as a restrict pointer that cannot alias with any other arguments. But in the context of the kernel, that 'use snprintf() to concatenate to the end result' does work, and the pattern shows up in multiple places. And we have not marked our own version of snprintf() as taking restrict pointers, so the warning is incorrect for now, and gcc picks it up on its own. If we do start using 'restrict' in the kernel (and it might be a good idea if people find places where it matters), we'll need to figure out how to avoid this issue for snprintf and friends. But in the meantime, this warning is not useful. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the final array bounds warning removal for gcc-10 for now. Again, the warning is good, and we should re-enable all these warnings when we have converted all the legacy array declaration cases to flexible arrays. But in the meantime, it's just noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sagi Grimberg authored
When the controller is reconnecting, the host fails I/O and admin commands as the host cannot reach the controller. ns scanning may revalidate namespaces during that period and it is wrong to remove namespaces due to these failures as we may hang (see 205da243). One command that may fail is nvme_identify_ns_descs. Since we return success due to having ns identify descriptor list optional, we continue to compare ns identifiers in nvme_revalidate_disk, obviously fail and return -ENODEV to nvme_validate_ns, which will remove the namespace. Exactly what we don't want to happen. Fixes: 22802bf7 ("nvme: Namepace identification descriptor list is optional") Tested-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Alexey Dobriyan authored
Pre-incrementing ->cq_head can't be done in memory because OOB value can be observed by another context. This devalues space savings compared to original code :-\ $ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-32 (-32) Function old new delta nvme_poll_irqdisable 464 456 -8 nvme_poll 455 447 -8 nvme_irq 388 380 -8 nvme_dev_disable 955 947 -8 But the code is minimal now: one read for head, one read for q_depth, one increment, one comparison, single instruction phase bit update and one write for new head. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: John Garry <john.garry@huawei.com> Tested-by: John Garry <john.garry@huawei.com> Fixes: e2a366a4 ("nvme-pci: slimmer CQ head update") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Cache a copy of the name for the life time of the backing_dev_info structure so that we can reference it even after unregistering. Fixes: 68f23b89 ("memcg: fix a crash in wb_workfn when a device disappears") Reported-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Yufen Yu authored
Use the common interface bdi_dev_name() to get device name. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Add missing <linux/backing-dev.h> include BFQ Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Linus Torvalds authored
This is another fine warning, related to the 'zero-length-bounds' one, but hitting the same historical code in the kernel. Because C didn't historically support flexible array members, we have code that instead uses a one-sized array, the same way we have cases of zero-sized arrays. The one-sized arrays come from either not wanting to use the gcc zero-sized array extension, or from a slight convenience-feature, where particularly for strings, the size of the structure now includes the allocation for the final NUL character. So with a "char name[1];" at the end of a structure, you can do things like v = my_malloc(sizeof(struct vendor) + strlen(name)); and avoid the "+1" for the terminator. Yes, the modern way to do that is with a flexible array, and using 'offsetof()' instead of 'sizeof()', and adding the "+1" by hand. That also technically gets the size "more correct" in that it avoids any alignment (and thus padding) issues, but this is another long-term cleanup thing that will not happen for 5.7. So disable the warning for now, even though it's potentially quite useful. Having a slew of warnings that then hide more urgent new issues is not an improvement. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is a fine warning, but we still have a number of zero-length arrays in the kernel that come from the traditional gcc extension. Yes, they are getting converted to flexible arrays, but in the meantime the gcc-10 warning about zero-length bounds is very verbose, and is hiding other issues. I missed one actual build failure because it was hidden among hundreds of lines of warning. Thankfully I caught it on the second go before pushing things out, but it convinced me that I really need to disable the new warnings for now. We'll hopefully be all done with our conversion to flexible arrays in the not too distant future, and we can then re-enable this warning. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-