- 24 May, 2018 1 commit
-
-
Steve Wise authored
Add a table of important fields from the c4iw_ep* structures to the cm_id resource tracking table. This is helpful in debugging. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
- 22 May, 2018 3 commits
-
-
Steve Wise authored
Add a helper function for iwarp drivers to be able to map an rdma_cm_id to an iw_cm_id. This is useful for dumping driver specific NLDEV/RESTRACK connection state. Add a helper to return the rdma_cm_id pointer from the rdma_restack pointer. This is needed for rdma drivers to map a res entry back to the public rdma_cm_id struct. Signed-off-by:
-
Steve Wise authored
In active side connections, the provider_data field is not getting set. This will be used in a subsequent patch to dump state, so always set it. Signed-off-by:
-
Doug Ledford authored
We do a light flush on CLIENT_REREG and SM_CHANGE events. This goes through and marks paths invalid. But we weren't always checking for this validity when we needed to, and so we could keep using a path marked invalid. What's more, once we establish a path with a valid ah, we put a pointer to the ah in the neigh struct directly, so even if we mark the path as invalid, as long as the neigh has a direct pointer to the ah, it keeps using the old, outdated ah. To fix this we do several things. 1) Put the valid flag in the ah instead of the path struct, so when we put the ah pointer directly in the neigh struct, we can easily check the validity of the ah on send events. 2) Check the neigh->ah and neigh->ah->valid elements in the needed places, and if we have an ah, but it's invalid, then invoke a refresh of the ah. 3) Fix the various places that check for path, but didn't check for path->valid (now path->ah && path->ah->valid). Reported-by:
Evgenii Smirnov <evgenii.smirnov@profitbricks.com> Fixes: ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by:
-
- 17 May, 2018 10 commits
-
-
Zhu Yanjun authored
In the exit branch, WARN_ON_ONCE is called to show stack. So it is not necessary to call WARN_ON_ONCE before going to exit. Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Yixian Liu authored
This patch adds the support of 64KB page size for hip08 in kernel. Signed-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
In ipoib_mcast_restart_task() the netif_addr_lock() is invoked prior local_irq_save(). netif_addr_lock() should not be invoked in interrupt disabled section, only in BH disabled sections. The priv->lock is always acquired with disabled interrupts. The only place where netif_addr_lock() and priv->lock nest ist ipoib_mcast_restart_task(). Drop the local_irq_save() and acquire priv->lock with spin_lock_irq() inside the netif_addr locked section. It's safe to do so because the caller is either a worker function or __ipoib_ib_dev_flush() which are both calling with interrupts enabled (and since BH is enabled here, too so netif_addr_lock_bh() needs to be used). Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Ariel Levkovich authored
This patch reports the device's capbilities to offload encapsulated MPLS tunnel protocols to user-space: - Capability to offload MPLS over GRE. - Capability to offload MPLS over UDP. Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Ariel Levkovich <lariel@mellanox.com> Signed-off-by:
-
Ariel Levkovich authored
This patch introduces support for the MPLS flow spec and allows the creation of rules that are matching on the MPLS label. Applying the rule matching depends on the flow specs order and the location of the MPLS in the spec list as there are different configurations to be made in the device in the cases of MPLSoGRE and MPLSoUDP vs. non-encapsulated MPLS. Reviewed-by:
-
Ariel Levkovich authored
This patch introduces support for the GRE flow spec and allowing the creation of rules based on the protocol and key fields that are part of GRE protocol header. Reviewed-by:
-
Ariel Levkovich authored
Add a new MPLS steering match filter that can match against a single MPLS tag field. Since the MPLS header can reside in different locations in the packet's protocol stack as well as be encapsulated with a tunnel protocol, it is required to know the exact location of the header in the protocol stack. Therefore, when including the MPLS protocol spec in the specs list, it is mandatory to provide the list in an ordered manner, so that it represents the actual header order in a matching packet. Drivers that process the spec list and apply the matching rule should treat the position of the MPLS spec in the spec list as the actual location of the MPLS label in the packet's protocol stack. Reviewed-by:
-
Ariel Levkovich authored
Add ib_uverbs_flow_spec_mpls to define a rule to match the MPLS protocol. The spec includes the generic specs header, type, size and reserved fields while the filter itself is defined as ib_uverbs_flow_mpls_filter and includes a single 32bit field named 'label' which consists of: Bits 0:19 - The MPLS label. Bits 20:22 - Traffic class field. Bit 23 - Bottom of stack bit. Bits 24:31 - Time to live (TTL) field. Reviewed-by:
-
Ariel Levkovich authored
Adding a new GRE steering match filter that can match against key and protocol fields. Reviewed-by:
-
Ariel Levkovich authored
Add ib_uverbs_flow_spec_gre to define a rule to match the GRE encapsulation protocol. The spec includes the generic specs header, type, size and reserved fields while the filter itself is defined as ib_uverbs_flow_gre_filter and includes: 1. Checksum present bit, key present bit and version bits in a single 16bit field. 2. Protocol type field - Indicates the ether protocol type of the encapsulated payload. 3. Key field - present if key bit is set and contains an application specific key value. Reviewed-by:
-
- 16 May, 2018 4 commits
-
-
Parav Pandit authored
During CM request processing flow, ah_attr is initialized twice. First based on wc. Secondly based on primary path record. ah_attr initialization from path record can fail, which leads to ah_attr zeroed out. Therefore, always initialize ah_attr on stack during reinitialization phase. If ah_attr init is successful, use the new ah_attry by overwriting the old one. If the ah_attr init fails, continue to use the last ah_attr. Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Parav Pandit authored
During CM LAP processing, ah_attr is reinitialized on receiving LAP request. First likely during CM request processing. ah_attr might get zero out if LAP processing fails. Therefore, attempt to create new ah_attr for the LAP message. If the initialization fails, continue with older ah_attr. If the initialization passes, consider the new ah_attr by overwriting the older one. Signed-off-by:
-
Parav Pandit authored
AH attribute of the cm_id can be overwritten if LAP message is received on CM request which is in progress. This bug got introduced to avoid sleeping when spin lock is held as part of commit in Fixes tag. Therefore validate the cm_id state first and continue to perform AV ah_attr initialization. Given that Aleternative path related messages are not supported for RoCE, init_av_from_response/path is such messages are ok to be called from blocking context. Fixes: 33f93e1e ("IB/cm: Fix sleeping while spin lock is held") Signed-off-by:
-
Shiraz Saleem authored
If two listeners are created with different IP's but same port, the second rdma_listen fails due to a duplicate port entry being added from the CQP add APBVT OP. commit f16dc0aa ("i40iw: Add support for port reuse on active side connections") does not account for listener side port reuse. Check for duplicate port before invoking the CQP command to add APBVT entry and delete the entry only if the port is not in use. Additionally, consolidate all port-reuse logic into i40iw_manage_apbvt. Fixes: f16dc0aa ("i40iw: Add support for port reuse on active side connections") Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
- 15 May, 2018 8 commits
-
-
Yuval Shaia authored
"return" statement at the end of void function is redundant, removing it. Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by:
Qing Huang <qing.huang@oracle.com> Signed-off-by:
-
Steve Wise authored
Remove sq/rq wr_id attributes because typically they are pointers and we don't want to pass up kernel pointers. Fixes: 056f9c7f ("iw_cxgb4: dump detailed driver-specific QP information") Signed-off-by:
-
Steve Wise authored
Remove mr iova attribute because we don't want to pass up kernel pointers. Fixes: fccec5b8 ("RDMA/nldev: provide detailed MR information") Signed-off-by:
-
Steve Wise authored
Fixes: 056f9c7f ("iw_cxgb4: dump detailed driver-specific QP information") Signed-off-by:
-
Doug Ledford authored
During this merge window, we added support for addition RDMA netlink operations. Unfortunately, we added the items in the middle of our uapi enum. Fix that before final release. Fixes: da5c8507 ("RDMA/nldev: add driver-specific resource tracking") Signed-off-by:
-
Doug Ledford authored
A recent patch set to rework the usage of debugfs and to add fault injection capabilities via debugfs files to the hfi1 driver introduced a build error that only shows up when debugfs is fully disabled. The patchset mistakenly defines some empty stub functions in two different headers when debugfs is disabled. Remove the set that shouldn't have been there to resolve the issue. Fixes: a74d5307 ("IB/hfi1: Rework fault injection machinery") Signed-off-by:
-
Ben Hutchings authored
DMA_VIRT_OPS requires that dma_addr_t is at least as wide as a pointer, which is expressed as a dependency on !64BIT || ARCH_DMA_ADDR_T_64BIT. For parisc64 this is not true, and if these IB modules are enabled, kconfig warns: WARNING: unmet direct dependencies detected for DMA_VIRT_OPS Depends on [n]: HAS_DMA [=y] && (!64BIT [=y] || ARCH_DMA_ADDR_T_64BIT) Selected by [m]: - INFINIBAND_RDMAVT [=m] && INFINIBAND [=m] && 64BIT [=y] && PCI [=y] - RDMA_RXE [=m] && INET [=y] && PCI [=y] && INFINIBAND [=m] Add dependencies to fix this. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Doug Ledford authored
Merge tag 'mlx5-updates-2018-05-07' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next mlx5-updates-2018-05-07 mlx5 core driver misc cleanups and updates: - fix spelling mistake: "modfiy" -> "modify" - Cleanup unused field in Work Queue parameters - dump_command mailbox length printed - Refactor num of blocks in mailbox calculation - Decrease level of prints about non-existent MKEY - remove some extraneous spaces in indentations Pulling the same update already pulled into net-next by Dave Miller. Signed-off-by:
-
- 09 May, 2018 14 commits
-
-
Brian Welty authored
Moving receive-side WQE allocation logic into rdmavt will allow further code reuse between qib and hfi1 drivers. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Brian Welty <brian.welty@intel.com> Signed-off-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Sebastian Sanchez authored
Currently the driver doesn't support completion vectors. These are used to indicate which sets of CQs should be grouped together into the same vector. A vector is a CQ processing thread that runs on a specific CPU. If an application has several CQs bound to different completion vectors, and each completion vector runs on different CPUs, then the completion queue workload is balanced. This helps scale as more nodes are used. Implement CQ completion vector support using a global workqueue where a CQ entry is queued to the CPU corresponding to the CQ's completion vector. Since the workqueue is global, it's guaranteed to always be there when queueing CQ entries; Therefore, the RCU locking for cq->rdi->worker in the hot path is superfluous. Each completion vector is assigned to a different CPU. The number of completion vectors available is computed by taking the number of online, physical CPUs from the local NUMA node and subtracting the CPUs used for kernel receive queues and the general interrupt. Special use cases: * If there are no CPUs left for completion vectors, the same CPU for the general interrupt is used; Therefore, there would only be one completion vector available. * For multi-HFI systems, the number of completion vectors available for each device is the total number of completion vectors in the local NUMA node divided by the number of devices in the same NUMA node. If there's a division remainder, the first device to get initialized gets an extra completion vector. Upon a CQ creation, an invalid completion vector could be specified. Handle it as follows: * If the completion vector is less than 0, set it to 0. * Set the completion vector to the result of the passed completion vector moded with the number of device completion vectors available. Reviewed-by:Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
-
Sebastian Sanchez authored
CPU masks are used to keep track of affinity assignments for IRQs and processes. Operations performed on these affinity CPU masks are duplicated throughout the code. Create common functions for affinity CPU mask operations to remove duplicate code. Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Sebastian Sanchez authored
All threads queuing CQ entries on different CQs are unnecessarily synchronized by a spin lock to check if the CQ kthread worker hasn't been destroyed before queuing an CQ entry. The lock used in 6efaf10f ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker") is a device global lock and will have poor performance at scale as completions are entered from a large number of CPUs. Convert to use RCU where the read side of RCU is rvt_cq_enter() to determine that the worker is alive prior to triggering the completion event. Apply write side RCU semantics in rvt_driver_cq_init() and rvt_cq_exit(). Fixes: 6efaf10f ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker") Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by:
-
Kamenee Arumugam authored
When Hfi1 device is unresponsive, reading the RcvArrayCnt register will return all 1's. This value is then used to remap chip's RcvArray. The incorrect all ones value used in remapping RcvArray will cause warn on as shown by trace below: [<ffffffff81685eac>] dump_stack+0x19/0x1b [<ffffffff81085820>] warn_slowpath_common+0x70/0xb0 [<ffffffff810858bc>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff81065c29>] __ioremap_caller+0x279/0x320 [<ffffffff8142873c>] ? _dev_info+0x6c/0x90 [<ffffffffa021d155>] ? hfi1_pcie_ddinit+0x1d5/0x330 [hfi1] [<ffffffff81065d62>] ioremap_wc+0x32/0x40 [<ffffffffa021d155>] hfi1_pcie_ddinit+0x1d5/0x330 [hfi1] [<ffffffffa0204851>] hfi1_init_dd+0x1d1/0x2440 [hfi1] [<ffffffff813503dc>] ? pci_write_config_word+0x1c/0x20 Read CCE revision register first to verify that WFR device is responsive. If the read return "all ones", bail out from init and fail the driver load. Reviewed-by:
Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by:
-
Mitko Haralanov authored
The packet fault injection code present in the HFI1 driver had some issues which not only fragment the code but also created user confusion. Furthermore, it suffered from the following issues: 1. The fault_packet method only worked for received packets. This meant that the only fault injection mode available for sent packets is fault_opcode, which did not allow for random packet drops on all egressing packets. 2. The mask available for the fault_opcode mode did not really work due to the fact that the opcode values are not bits in a bitmask but rather sequential integer values. Creating a opcode/mask pair that would successfully capture a set of packets was nearly impossible. 3. The code was fragmented and used too many debugfs entries to operate and control. This was confusing to users. 4. It did not allow filtering fault injection on a per direction basis - egress vs. ingress. In order to improve or fix the above issues, the following changes have been made: 1. The fault injection methods have been combined into a single fault injection facility. As such, the fault injection has been plugged into both the send and receive code paths. Regardless of method used the fault injection will operate on both egress and ingress packets. 2. The type of fault injection - by packet or by opcode - is now controlled by changing the boolean value of the file "opcode_mode". When the value is set to True, fault injection is done by opcode. Otherwise, by packet. 2. The masking ability has been removed in favor of a bitmap that holds opcodes of interest (one bit per opcode, a total of 256 bits). This works in tandem with the "opcode_mode" value. When the value of "opcode_mode" is False, this bitmap is ignored. When the value is True, the bitmap lists all opcodes to be considered for fault injection. By default, the bitmap is empty. When the user wants to filter by opcode, the user sets the corresponding bit in the bitmap by echo'ing the bit position into the 'opcodes' file. This gets around the issue that the set of opcodes does not lend itself to effective masks and allow for extremely fine-grained filtering by opcode. 4. fault_packet and fault_opcode methods have been combined. Hence, there is only one debugfs directory controlling the entire operation of the fault injection machinery. This reduces the number of debugfs entries and provides a more unified user experience. 5. A new control files - "direction" - is provided to allow the user to control the direction of packets, which are subject to fault injection. 6. A new control file - "skip_usec" - is added that would allow the user to specify a "timeout" during which no fault injection will occur. In addition, the following bug fixes have been applied: 1. The fault injection code has been split into its own header and source files. This was done to better organize the code and support conditional compilation without littering the code with #ifdef's. 2. The method by which the TX PIO packets were being marked for drop conflicted with the way send contexts were being setup. As a result, the send context was repeatedly being reset. 3. The fault injection only makes sense when the user can control it through the debugfs entries. However, a kernel configuration can enable fault injection but keep fault injection debugfs entries disabled. Therefore, it makes sense that the HFI fault injection code depends on both. 4. Error suppression did not take into account the method by which PIO packets were being dropped. Therefore, even with error suppression turned on, errors would still be displayed to the screen. A larger enough packet drop percentage would case the kernel to crash because the driver would be stuck printing errors. Reviewed-by:Don Hiatt <don.hiatt@intel.com> Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
-
Alex Estrin authored
A warm restart will fail to unload the driver, leaving link state potentially flapping up to the point the BIOS resets the adapter. Correct the issue by hooking the shutdown pci method, which will bring port down. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
User send context integrity bits are cleared before the context is disabled. If the send context is still processing data, any packets that need those integrity bits will cause an error and halt the send context. During the disable handling, the driver waits for the context to drain. If the context is halted, the driver will eventually timeout because the context won't drain and then incorrectly bounce the link. Reorder the bit clearing and the context disable. Examine the software state and send context status as well as the egress status to determine if a send context is in the halted state. Promote the check macros to static functions for consistency with the new check and to follow kernel style. Remove an unused define that refers to the egress timeout. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
-
Michael J. Ruhl authored
The driver_pstate() function is used to map internal driver state information to externally defined states. The VERIFY_CAP and GOING_UP states are config/training states, but the mapping routing returns the POLLING value. Update the return values for VERIFY_CAP and GOING_UP to return the correct value: TRAINING. Reviewed-by:
-
Mike Marciniszyn authored
There are config dependent code paths that expose panics in unload paths both in this file and in debugfs_remove_recursive() because CONFIG_FAULT_INJECTION and CONFIG_FAULT_INJECTION_DEBUG_FS can be set independently. Having CONFIG_FAULT_INJECTION set and CONFIG_FAULT_INJECTION_DEBUG_FS reset causes fault_create_debugfs_attr() to return an error. The debugfs.c routines tolerate failures, but the module unload panics dereferencing a NULL in the two exit routines. If that is fixed, the dir passed to debugfs_remove_recursive comes from a memory location that was freed and potentially reused causing a segfault or corrupting memory. Here is an example of the NULL deref panic: [66866.286829] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 [66866.295602] IP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] [66866.301138] PGD 858496067 P4D 858496067 PUD 8433a7067 PMD 0 [66866.307452] Oops: 0000 [#1] SMP [66866.310953] Modules linked in: hfi1(-) rdmavt rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm iw_cm ib_cm ib_core rpcsec_gss_krb5 nfsv4 dns_resolver nfsv3 nfs fscache sb_edac x86_pkg_temp_thermal intel_powerclamp vfat fat coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel iTCO_wdt iTCO_vendor_support crypto_simd mei_me glue_helper cryptd mxm_wmi ipmi_si pcspkr lpc_ich sg mei ioatdma ipmi_devintf i2c_i801 mfd_core shpchp ipmi_msghandler wmi acpi_power_meter acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt igb fb_sys_fops ttm ahci ptp crc32c_intel libahci pps_core drm dca libata i2c_algo_bit i2c_core [last unloaded: opa_vnic] [66866.385551] CPU: 8 PID: 7470 Comm: rmmod Not tainted 4.14.0-mam-tid-rdma #2 [66866.393317] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 [66866.405252] task: ffff88084f28c380 task.stack: ffffc90008454000 [66866.411866] RIP: 0010:hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] [66866.417984] RSP: 0018:ffffc90008457da0 EFLAGS: 00010202 [66866.423812] RAX: 0000000000000000 RBX: ffff880857de0000 RCX: 0000000180040001 [66866.431773] RDX: 0000000180040002 RSI: ffffea0021088200 RDI: 0000000040000000 [66866.439734] RBP: ffffc90008457da8 R08: ffff88084220e000 R09: 0000000180040001 [66866.447696] R10: 000000004220e001 R11: ffff88084220e000 R12: ffff88085a31c000 [66866.455657] R13: ffffffffa07c9820 R14: ffffffffa07c9890 R15: ffff881059d78100 [66866.463618] FS: 00007f6876047740(0000) GS:ffff88085f800000(0000) knlGS:0000000000000000 [66866.472644] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66866.479053] CR2: 0000000000000088 CR3: 0000000856357006 CR4: 00000000001606e0 [66866.487013] Call Trace: [66866.489747] remove_one+0x1f/0x220 [hfi1] [66866.494221] pci_device_remove+0x39/0xc0 [66866.498596] device_release_driver_internal+0x141/0x210 [66866.504424] driver_detach+0x3f/0x80 [66866.508409] bus_remove_driver+0x55/0xd0 [66866.512784] driver_unregister+0x2c/0x50 [66866.517164] pci_unregister_driver+0x2a/0xa0 [66866.521934] hfi1_mod_cleanup+0x10/0xaa2 [hfi1] [66866.526988] SyS_delete_module+0x171/0x250 [66866.531558] do_syscall_64+0x67/0x1b0 [66866.535644] entry_SYSCALL64_slow_path+0x25/0x25 [66866.540792] RIP: 0033:0x7f6875525c27 [66866.544777] RSP: 002b:00007ffd48528e78 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [66866.553224] RAX: ffffffffffffffda RBX: 0000000001cc01d0 RCX: 00007f6875525c27 [66866.561185] RDX: 00007f6875596000 RSI: 0000000000000800 RDI: 0000000001cc0238 [66866.569146] RBP: 0000000000000000 R08: 00007f68757e9060 R09: 00007f6875596000 [66866.577120] R10: 00007ffd48528c00 R11: 0000000000000206 R12: 00007ffd48529db4 [66866.585080] R13: 0000000000000000 R14: 0000000001cc01d0 R15: 0000000001cc0010 [66866.593040] Code: 90 0f 1f 44 00 00 48 83 3d a3 8b 03 00 00 55 48 89 e5 53 48 89 fb 74 4e 48 8d bf 18 0c 00 00 e8 9d f2 ff ff 48 8b 83 20 0c 00 00 <48> 8b b8 88 00 00 00 e8 2a 21 b3 e0 48 8b bb 20 0c 00 00 e8 0e [66866.614127] RIP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] RSP: ffffc90008457da0 [66866.621885] CR2: 0000000000000088 [66866.625618] ---[ end trace c4817425783fb092 ]--- Fix by insuring that upon failure from fault_create_debugfs_attr() the parent pointer for the routines is always set to NULL and guards added in the exit routines to insure that debugfs_remove_recursive() is not called when when the parent pointer is NULL. Fixes: 0181ce31 ("IB/hfi1: Add receive fault injection feature") Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by:
-
Alex Estrin authored
For lid routed packets 'hop_cnt' is zero, therefore current test is incomplete. Fix it by using local mad check for both lid routed and direct routed MADs. Reviewed-by:
-
Michael J. Ruhl authored
A failure of program_rcvarray() is treated inconsistently by the calling function. In one case the error is returned, in a second case, the error is overwritten with EFAULT. In both cases the code path is doing the same thing, allocating memory for groups, so it should be consistent. Make the error path consistent and return the error generated by program_rcvarray(). Reviewed-by:
-
Sebastian Sanchez authored
When the LCB isn't able to get any lanes operational on the first transition into mission mode, the link transfer active never happens and the LNI stays in the polling state indefinitely. Reset LCB upon receiving an 8051 interrupt for LCB to try to obtain lanes with firmware version 1.25.0 or later. Also, update the LCB reset value in other parts of the code with a macro defined to make the code more maintainable and rename functions with the link_width label to link_mode to reflect the fact that those functions set and read link related data not just the link width. Reviewed-by:
-
Doug Ledford authored
Several items of conflict have arisen between the RDMA stack's for-rc branch and upcoming for-next work: 9fd4350b ("IB/rxe: avoid double kfree_skb") directly conflicts with 2e473507 ("IB/rxe: optimize the function duplicate_request") Patches already submitted by Intel for the hfi1 driver will fail to apply cleanly without this merge Other people on the mailing list have notified that their upcoming patches also fail to apply cleanly without this merge Signed-off-by:
-
