- 31 Jul, 2013 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixesJohn W. Linville authored
Samuel Ortiz <sameo@linux.intel.com> says: 'This is the second NFC fixes pull request for 3.11. We have: - A build failure fix for the NCI SPI transport layer due to a missing CRC_CCITT Kconfig dependency. - A netlink command rename: CMD_FW_UPLOAD was merged during the 3.11 merge window but the typical terminology for loading a firmware to a target is firmware download rather than upload. In order to avoid any confusion in a file exported to userspace, we rename this command into CMD_FW_DOWNLOAD." Signed-off-by:John W. Linville <linville@tuxdriver.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJohn W. Linville authored
Conflicts: net/bluetooth/hci_core.c
-
Luciano Coelho authored
Soon the coelho@ti.com email will not be valid anymore, so change it to my private one. Cc: Luciano Coelho <luca@coelho.fi> Signed-off-by:
Luciano Coelho <coelho@ti.com> Signed-off-by:
-
Stone Piao authored
We missed bss_mode check for P2P client. Signed-off-by:
Stone Piao <piaoyun@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Avinash Patil authored
This patch fixes an issue wherein adhoc rates were being copied into association request from P2P client. Cc: <stable@vger.kernel.org> # 3.10.y Signed-off-by:
-
Avinash Patil authored
This patch fixes an issue wherein association would fail on P2P interfaces. This happened because we are checking priv->mode against NL80211_IFTYPE_STATION. While this check is correct for infrastructure stations, it would fail P2P clients for which mode is NL80211_IFTYPE_P2P_CLIENT. Better check would be bss_role which has only 2 values: STA/AP. Cc: <stable@vger.kernel.org> # 3.10.y Signed-off-by:
-
- 30 Jul, 2013 1 commit
-
-
Samuel Ortiz authored
Loading a firmware into a target is typically called firmware download, not firmware upload. So we rename the netlink API to NFC_CMD_FW_DOWNLOAD in order to avoid any terminology confusion from userspace. Signed-off-by:Samuel Ortiz <sameo@linux.intel.com>
-
- 29 Jul, 2013 6 commits
-
-
-
-
-
Stanislaw Gruszka authored
Since we clear QUEUE_STARTED in rt2x00queue_stop_queue(), following call to rt2x00queue_pause_queue() reduce to noop, i.e we do not stop queue in mac80211. To fix that introduce rt2x00queue_pause_queue_nocheck() function, which will stop queue in mac80211 directly. Note that rt2x00_start_queue() explicitly set QUEUE_PAUSED bit. Note also that reordering operations i.e. first call to rt2x00queue_pause_queue() and then clear QUEUE_STARTED bit, will race with rt2x00queue_unpause_queue(), so calling ieee80211_stop_queue() directly is the only available solution to fix the problem without major rework. Cc: stable@vger.kernel.org Signed-off-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
Johan Hedberg authored
In certain circumstances, such as an HCI driver using __hci_cmd_sync_ev with HCI_EV_CMD_COMPLETE as the expected completion event there is the chance that hci_event_packet will call hci_req_cmd_complete twice (once for the explicitly looked after event and another time in the actual handler of cmd_complete). In the case of __hci_cmd_sync_ev this introduces a race where the first call wakes up the blocking __hci_cmd_sync_ev and lets it complete. However, by the time that a second __hci_cmd_sync_ev call is already in progress the second hci_req_cmd_complete call (from the previous operation) will wake up the blocking function prematurely and cause it to fail, as witnessed by the following log: [ 639.232195] hci_rx_work: hci0 Event packet [ 639.232201] hci_req_cmd_complete: opcode 0xfc8e status 0x00 [ 639.232205] hci_sent_cmd_data: hci0 opcode 0xfc8e [ 639.232210] hci_req_sync_complete: hci0 result 0x00 [ 639.232220] hci_cmd_complete_evt: hci0 opcode 0xfc8e [ 639.232225] hci_req_cmd_complete: opcode 0xfc8e status 0x00 [ 639.232228] __hci_cmd_sync_ev: hci0 end: err 0 [ 639.232234] __hci_cmd_sync_ev: hci0 [ 639.232238] hci_req_add_ev: hci0 opcode 0xfc8e plen 250 [ 639.232242] hci_prepare_cmd: skb len 253 [ 639.232246] hci_req_run: length 1 [ 639.232250] hci_sent_cmd_data: hci0 opcode 0xfc8e [ 639.232255] hci_req_sync_complete: hci0 result 0x00 [ 639.232266] hci_cmd_work: hci0 cmd_cnt 1 cmd queued 1 [ 639.232271] __hci_cmd_sync_ev: hci0 end: err 0 [ 639.232276] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-61) Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Johan Hedberg authored
None of the BlueFRITZ! devices with manufacurer ID 31 (AVM Berlin) support HCI_Read_Local_Supported_Commands. It is safe to use the manufacturer ID (instead of e.g. a USB ID specific quirk) because the company never created any newer controllers. < HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014 > HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Unknown HCI Command (0x01) Reported-by:Jörg Esser <jackfritt@boh.de> Signed-off-by:
-
- 26 Jul, 2013 6 commits
-
-
Arend van Spriel authored
When the brcmfmac device is physically removed cfg80211 gives a warning upon unregistering the net device (see below). [23052.390197] WARNING: CPU: 0 PID: 30 at net/wireless/core.c:937 cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211]() [23052.400843] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) pl2303 usbserial binfmt_misc snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event lpc_ich snd_seq snd_timer snd_seq_device snd psmouse mfd_core serio_raw soundcore snd_page_alloc intel_ips dell_laptop dell_wmi sparse_keymap dcdbas nouveau ttm drm_kms_helper drm i2c_algo_bit mxm_wmi ahci libahci sdhci_pci firewire_ohci firewire_core sdhci crc_itu_t mmc_core intel_agp intel_gtt e1000e ptp pps_core agpgart video [last unloaded: brcmfmac] [23052.452987] CPU: 0 PID: 30 Comm: khubd Tainted: G O 3.11.0-rc1-wl-testing-lockdep-00002-g41cc093-dirty #1 [23052.463480] Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011 [23052.470852] 00000000 00000000 f4efdc18 c1522e3d f845bed2 f4efdc48 c103fbe4 c16a9254 [23052.478762] 00000000 0000001e f845bed2 000003a9 f841da44 f841da44 f3790004 f25539c0 [23052.486741] e2700200 f4efdc58 c103fc22 00000009 00000000 f4efdcc0 f841da44 00000002 [23052.494712] Call Trace: [23052.497165] [<c1522e3d>] dump_stack+0x4b/0x66 [23052.501685] [<c103fbe4>] warn_slowpath_common+0x84/0xa0 [23052.507085] [<f841da44>] ? cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.514542] [<f841da44>] ? cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.521981] [<c103fc22>] warn_slowpath_null+0x22/0x30 [23052.527191] [<f841da44>] cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.534494] [<c150abe8>] ? packet_notifier+0xc8/0x1d0 [23052.539703] [<c150abfc>] ? packet_notifier+0xdc/0x1d0 [23052.544880] [<c150ab20>] ? packet_seq_stop+0x30/0x30 [23052.550002] [<c152d655>] notifier_call_chain+0x45/0x60 [23052.555298] [<c106839f>] raw_notifier_call_chain+0x1f/0x30 [23052.560963] [<c143c693>] call_netdevice_notifiers_info+0x33/0x70 [23052.567153] [<c1459869>] ? qdisc_destroy+0x99/0xb0 [23052.572116] [<c143c6e3>] call_netdevice_notifiers+0x13/0x20 [23052.577861] [<c143df93>] rollback_registered_many+0xf3/0x1d0 [23052.583687] [<c1524cfc>] ? mutex_lock_nested+0x25c/0x350 [23052.589150] [<c143e0f4>] rollback_registered+0x24/0x40 [23052.594445] [<c143e15f>] unregister_netdevice_queue+0x4f/0xb0 [23052.600344] [<c143e299>] unregister_netdev+0x19/0x30 [23052.605484] [<f865b38f>] brcmf_del_if+0xbf/0x160 [brcmfmac] [23052.611223] [<f865b7ae>] brcmf_detach+0x5e/0xd0 [brcmfmac] [23052.616881] [<f8667413>] brcmf_usb_disconnect+0x63/0xa0 [brcmfmac] [23052.623217] [<c13e09aa>] usb_unbind_interface+0x4a/0x180 When the device is physically connected the driver sends a disassoc command to the device and response triggers the driver to inform cfg80211 about it. However, with the device removed the disassoc command fails. This patch adds a call to cfg80211_disconnected() when that command fails. The warning was added by commit below and also cleans up, but better doing it in the driver if only to get rid of the warning. commit f9bef3df Author: Ben Greear <greearb@candelatech.com> Date: Wed Jun 19 14:06:26 2013 -0700 wireless: check for dangling wdev->current_bss pointer Cc: Ben Greear <greearb@candelatech.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Tomasz Moń authored
Both type and pkt_len variables are in host endian and these should be in Little Endian in the payload. Signed-off-by:
Tomasz Moń <desowin@gmail.com> Acked-by:
-
Emmanuel Grumbach authored
If we forget to do so, we can't send HCMD to firmware while the NIC is in RFKILL state. Cc: stable@vger.kernel.org Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
When a not fully started aggregation session is destroyed and flushed, we get a warning, e.g. WARNING: at drivers/net/wireless/iwlwifi/pcie/tx.c:1142 iwl_trans_pcie_txq_disable+0x11c/0x160 queue 16 not used Modules linked in: [...] Pid: 5135, comm: hostapd Tainted: G W O 3.5.0 #10 Call Trace: wlan0: driver sets block=0 for sta 00:03:7f:10:44:d3 [<ffffffff81036492>] warn_slowpath_common+0x72/0xa0 [<ffffffff81036577>] warn_slowpath_fmt+0x47/0x50 [<ffffffffa0368d6c>] iwl_trans_pcie_txq_disable+0x11c/0x160 [iwlwifi] [<ffffffffa03a2099>] iwl_mvm_sta_tx_agg_flush+0xe9/0x150 [iwlmvm] [<ffffffffa0396c43>] iwl_mvm_mac_ampdu_action+0xf3/0x1e0 [iwlmvm] [<ffffffffa0293ad3>] ___ieee80211_stop_tx_ba_session+0x193/0x920 [mac80211] [<ffffffffa0294ed8>] __ieee80211_stop_tx_ba_session+0x48/0x70 [mac80211] [<ffffffffa029159f>] ieee80211_sta_tear_down_BA_sessions+0x4f/0x80 [mac80211] [<ffffffffa028a686>] __sta_info_destroy+0x66/0x370 [mac80211] [<ffffffffa028abb4>] sta_info_destroy_addr_bss+0x44/0x70 [mac80211] [<ffffffffa02a3e26>] ieee80211_del_station+0x26/0x50 [mac80211] [<ffffffffa01e6395>] nl80211_del_station+0x85/0x200 [cfg80211] when a station deauthenticated from us without fully setting up the aggregation session. Fix this by checking the aggregation state before removing the hardware queue. Cc: stable@vger.kernel.org Reviewed-by:
-
Ilan Peer authored
The managed interface PS was not disabled when a GO interface was added. As a consequence, when the station VMAC was in PS, the GO also was not on the medium. Fix this. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Reviewed-by:
-
Emmanuel Grumbach authored
This allows to clean all kinds of bad state it might be in. This solves situation where HW RFkill was switched while the NIC was offline. Until now, we relied on the firmware to do clean the interrupt, but new firmwares don't do that any more. Signed-off-by:
-
- 25 Jul, 2013 9 commits
-
-
AceLan Kao authored
Add support for the AR9462 chip T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e003 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Cc: Stable <stable@vger.kernel.org> Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
-
Gustavo Padovan authored
If hci_dev_open() is called after hci_register_dev() added the device to the hci_dev_list but before the workqueue are created we could run into a NULL pointer dereference (see below). This bug is very unlikely to happen, systems using bluetoothd to manage their bluetooth devices will never see this happen. BUG: unable to handle kernel NULL pointer dereference 0100 IP: [<ffffffff81077502>] __queue_work+0x32/0x3d0 (...) Call Trace: [<ffffffff81077be5>] queue_work_on+0x45/0x50 [<ffffffffa016e8ff>] hci_req_run+0xbf/0xf0 [bluetooth] [<ffffffffa01709b0>] ? hci_init2_req+0x720/0x720 [bluetooth] [<ffffffffa016ea06>] __hci_req_sync+0xd6/0x1c0 [bluetooth] [<ffffffff8108ee10>] ? try_to_wake_up+0x2b0/0x2b0 [<ffffffff8150e3f0>] ? usb_autopm_put_interface+0x30/0x40 [<ffffffffa016fad5>] hci_dev_open+0x275/0x2e0 [bluetooth] [<ffffffffa0182752>] hci_sock_ioctl+0x1f2/0x3f0 [bluetooth] [<ffffffff815c6050>] sock_do_ioctl+0x30/0x70 [<ffffffff815c75f9>] sock_ioctl+0x79/0x2f0 [<ffffffff811a8046>] do_vfs_ioctl+0x96/0x560 [<ffffffff811a85a1>] SyS_ioctl+0x91/0xb0 [<ffffffff816d989d>] system_call_fastpath+0x1a/0x1f Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
-
AceLan Kao authored
Add support for the AR3012 chip. T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=3121 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
-
Sujith Manoharan authored
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3402 Rev= 0.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Bug: https://bugzilla.kernel.org/show_bug.cgi?id=59701Signed-off-by:
Sujith Manoharan <sujith@msujith.org> Signed-off-by:
-
Adam Lee authored
PTR_ERR() returns a signed long type value which is limited by IS_ERR(), it must be a negative number whose range is [-MAX_ERRNO, 0). The bug here returns negative numbers as error codes, then check it by "if (ret < 0)", but -PTR_ERR() is actually positive. The wrong use here leads to failure as below, even panic. [ 12.958920] Bluetooth: hci0 command 0xfc8e tx timeout [ 14.961765] Bluetooth: hci0 command 0xfc8e tx timeout [ 16.964688] Bluetooth: hci0 command 0xfc8e tx timeout [ 20.954501] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 22.957358] Bluetooth: hci0 command 0xfc8e tx timeout [ 30.948922] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 32.951780] Bluetooth: hci0 command 0xfc8e tx timeout [ 40.943359] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 42.946219] Bluetooth: hci0 command 0xfc8e tx timeout [ 50.937812] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 52.940670] Bluetooth: hci0 command 0xfc8e tx timeout [ 60.932236] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 62.935092] Bluetooth: hci0 command 0xfc8e tx timeout [ 70.926688] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 72.929545] Bluetooth: hci0 command 0xfc8e tx timeout [ 80.921111] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 82.923969] Bluetooth: hci0 command 0xfc2f tx timeout [ 90.915542] Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110) [ 92.918406] Bluetooth: hci0 command 0xfc11 tx timeout [ 100.909955] Bluetooth: hci0 sending Intel patch command (0xfc11) failed (-110) [ 102.912858] Bluetooth: hci0 command 0xfc60 tx timeout [ 110.904394] Bluetooth: hci0 sending Intel patch command (0xfc60) failed (-110) [ 112.907293] Bluetooth: hci0 command 0xfc11 tx timeout [ 120.898831] Bluetooth: hci0 exiting Intel manufacturer mode failed (-110) [ 120.904757] bluetoothd[1030]: segfault at 4 ip 00007f8b2eb55236 sp 00007fff53ff6920 error 4 in bluetoothd[7f8b2eaff000+cb000] Signed-off-by:
Adam Lee <adam.lee@canonical.com> Signed-off-by:
-
Stanislaw Gruszka authored
Memory allocated by vmalloc (including stack) can not be used for DMA, i.e. data pointer on usb_control_msg() should not point to stack memory. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=977558Reported-and-tested-by:
Andy Lawrence <dr.diesel@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Thomas Loo authored
The Fujitsu Lifebook UH552/UH572 ships with a Qualcomm AR9462/AR3012 WLAN/BT-Combo card. Add device ID to the ath3k driver to enable the bluetooth side of things. Patch against v3.10. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04c5 ProdID=1330 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Thomas Loo <tloo@saltstorm.net> Signed-off-by:
-
Jaganath Kanakkassery authored
The length check is invalid since the length varies with type of info response. This was introduced by the commit cb3b3152 Because of this, l2cap info rsp is not handled and command reject is sent. > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels < ACL data: handle 11 flags 0x00 dlen 10 L2CAP(s): Command rej: reason 0 Command not understood Cc: stable@vger.kernel.org Signed-off-by:
Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by:
Chan-Yeol Park <chanyeol.park@samsung.com> Acked-by:
-
Arik Nemtsov authored
The current regdomain was not always set by the core. This causes cards with a custom regulatory domain to ignore user initiated changes if done before the card was registered. Signed-off-by:
Arik Nemtsov <arik@wizery.com> Acked-by:
Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by:
-
- 24 Jul, 2013 2 commits
-
-
David Spinadel authored
Set SSID bitmap for direct scan even on passive channels, for the passive-to-active feature. Without this patch only the SSID from probe request template is sent on passive channels, after passive-to-active switching, causing us to not find all desired networks. Remove the unused passive scan mask constant. Cc: stable@vger.kernel.org Reviewed-by:
David Spinadel <david.spinadel@intel.com> Signed-off-by:
-
Johannes Berg authored
Unfortunately, the firmware only supports replay counters for a single GTK in D3, so that we should only upload the last key and use its replay counters. Since mac80211 key iteration will walk through the keys in order of their addition, simply use the same HW key index (1) for all GTKs, thus overwriting previous ones with newer ones. The replay counters for it are already used. Reviewed-by:
Yaron Vaknin <Yaron.Vaknin@intel.com> Reviewed-by:
-
- 23 Jul, 2013 1 commit
-
-
Stanislaw Gruszka authored
My commit: commit 12e7f517 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Thu Feb 28 10:55:26 2013 +0100 mac80211: cleanup generic suspend/resume procedures removed check for deleting MONITOR and AP_VLAN when suspend. That can cause a crash (i.e. in iwlagn_mac_remove_interface()) since we remove interface in the driver that we did not add before. Reference: http://marc.info/?l=linux-kernel&m=137391815113860&w=2Bisected-by:
Ortwin Glück <odi@odi.ch> Reported-and-tested-by:
-
- 22 Jul, 2013 9 commits
-
-
Arend van Spriel authored
To avoid ending up in a NULL-pointer access, the function brcmf_txflowblock_if() should only be called for interfaces that have a netdev associated with it. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
-
Arend van Spriel authored
If the transmit fails because there are no hanger slots or any other reason and the packet was an EAPOL packet the pending counter should be decreased although it was not transmitted so the driver does not end up in a dead-lock. Reviewed-by:
-
Larry Finger authored
Building driver wil6210 in 3.10 and 3.11 kernels yields the following errors: CC [M] drivers/net/wireless/ath/wil6210/debugfs.o drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_print_ring': drivers/net/wireless/ath/wil6210/debugfs.c:163:11: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign] false); ^ In file included from include/linux/kernel.h:13:0, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *' extern void hex_dump_to_buffer(const void *buf, size_t len, ^ drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_txdesc_debugfs_show': drivers/net/wireless/ath/wil6210/debugfs.c:429:10: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign] sizeof(printbuf), false); ^ In file included from include/linux/kernel.h:13:0, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *' extern void hex_dump_to_buffer(const void *buf, size_t len, ^ cc1: all warnings being treated as errors make[5]: *** [drivers/net/wireless/ath/wil6210/debugfs.o] Error 1 make[4]: *** [drivers/net/wireless/ath/wil6210] Error 2 make[3]: *** [drivers/net/wireless/ath] Error 2 make[2]: *** [drivers/net/wireless] Error 2 make[1]: *** [drivers/net] Error 2 make: *** [drivers] Error 2 These errors are fixed by changing the type of the buffer from "unsigned char *" to "char *". Reported-by:Thomas Fjellstrom <thomas@fjellstrom.ca> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.10] Cc: Thomas Fjellstrom <thomas@fjellstrom.ca> Signed-off-by:
Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by:
-
Solomon Peachy authored
In monitor mode, priv->vif is NULL, but at one point in the receive path we blindly attempt to dereference it. Add a test to prevent this. Signed-off-by:
Solomon Peachy <pizza@shaftnet.org> Signed-off-by:
-
Oleksij Rempel authored
Currently ath9k_htc will reboot firmware only if interface was ever started. Which lead to the problem in case where interface was never started but module need to be reloaded. This patch will partially fix bug "ath9k_htc: Target is unresponsive" https://github.com/qca/open-ath9k-htc-firmware/issues/1 Reproduction case: - plug adapter - make sure nothing will touch it. Stop Networkmanager or blacklist mac address of this adapter. - rmmod ath9k_htc; sleep 1; modprobe ath9k_htc Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Oleksij Rempel authored
Currently we configure harwdare and clock, only after interface start. In this case, if we reload module or reboot PC without configuring adapter, firmware will freeze. There is no software way to reset adpter. This patch add initial configuration and set it in disabled state, to avoid this freeze. Behaviour of this patch should be similar to: ifconfig wlan0 up; ifconfig wlan0 down. Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1Tested-by:
Bo Shi <cnshibo@gmail.com> Signed-off-by:
-
Daniel Drake authored
During tear down (e.g. mwifiex_sdio_remove during system suspend), mwifiex left IRQs enabled for a significant period of time when it was unable to handle them correctly. This caused interrupt storms and interfered with the bluetooth interface on the same SDIO card. Solve this by disabling interrupts at the point when they can no longer be handled correctly, which is at the start of mwifiex_remove_card(). For cleanliness, we now enable interrupts in the mwifiex_add_card() path, to be symmetrical with the disabling of interrupts. We also couple the registration of the sdio IRQ handler with the actual enable/disable of interrupts at the hardware level. I also removed a write to this register in mwifiex_init_sdio which seemed pointless and won't cause any ill effects now that we only register the SDIO IRQ handler when we are ready to accept interrupts. Includes some corrections from Amitkumar Karwar. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
-
-
-
