- 14 Mar, 2017 2 commits
-
-
Jyri Sarha authored
Touching HW while clocks are off is a serious error and for instance breaks suspend functionality. After this patch tilcdc_crtc_update_fb() always updates the primary plane's framebuffer pointer, increases fb's reference count and stores vblank event. tilcdc_crtc_update_fb() only writes the fb's DMA address to HW if the crtc is enabled, as tilcdc_crtc_enable() takes care of writing the address on enable. This patch also refactors the tilcdc_crtc_update_fb() a bit. Number of subsequent small changes had made it almost unreadable. There should be no other functional changes but checking the CRTC's enable state. However, the locking goes a bit differently and some of the redundant checks have been removed in this new version. The enable_lock should be enough to protect the access to tilcdc_crtc->enabled. The irq_lock protects the access to last_vblank and next_fb. The check for vrefresh and last_vblank being valid is redundant, as the vrefresh should be always valid if the CRTC is enabled and now last_vblank should be too, because it is initialized to current time when CRTC raster is enabled. If for some reason the values are not correctly initialized the division by zero warning is quite appropriate. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Jyri Sarha authored
Fix badly hardcoded return return value under fail-label. All goto branches to the label set the "ret"-variable accordingly. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk>
-
- 10 Mar, 2017 8 commits
-
-
Fabio Estevam authored
Currently when the 'power-supply' regulator is passed via device tree it does not actually work since drm_panel_prepare()/drm_panel_enable() are never called. Quoting Thierry Reding: "It should really call drm_panel_prepare() and drm_panel_enable() while switching on the display pipeline and drm_panel_disable(), followed by drm_panel_unprepare() while switching off the display pipeline." So do as suggested, so that the 'power-supply' regulator can be functional. Reported-by:
Breno Lima <breno.lima@nxp.com> Suggested-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Tested-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Fabio Estevam authored
Currently the framebuffer content is displayed with incorrect offsets in both the vertical and horizontal directions. The fbdev version of the driver does not show this problem. Breno Lima dumped the eLCDIF controller registers on both the drm and fbdev drivers and noticed that the VDCTRL3 register is configured incorrectly in the drm driver. The fbdev driver calculates the vertical and horizontal wait counts of the VDCTRL3 register by doing: back porch + sync length. Looking at the horizontal and vertical timing diagram from include/drm/drm_modes.h this value corresponds to: crtc_[hv]total - crtc_[hv]sync_start So fix the VDCTRL3 register setting accordingly so that the eLCDIF controller can properly show the framebuffer content in the correct position. Reported-by:
Breno Lima <breno.lima@nxp.com> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Tested-by:
Breno Lima <breno.lima@nxp.com> Tested-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Marek Vasut authored
The mxsfb driver will crash if the mxsfb DT node has a subnode, but the content of the subnode is not of-graph binding with an endpoint linking to panel. The crash was triggered by providing old-style panel bindings to the mxsfb driver instead of the new of-graph ones. The problem happens in mxsfb_create_output(), which is invoked from mxsfb_load(). The mxsfb_create_output() iterates over all mxsfb DT subnode endpoints and tries to bind a panel on each endpoint. If there is any problem binding the panel, that is, mxsfb->panel == NULL, this function will return an error code, otherwise success 0 is returned. If the subnodes do not specify of-graph binding with an endpoint, the iteration over endpoints in mxsfb_create_output() will have zero cycles and the function will immediatelly return 0, but the mxsfb->panel will remain NULL. This is propagated back into the mxsfb_load(), which does not detect any problem and expects that the mxsfb->panel is valid, thus calls mxsfb_panel_attach(). But since mxsfb->panel == NULL, mxsfb_panel_attach() is called with first argument NULL and this crashes the kernel. This patch fixes the problem by explicitly checking for valid mxsfb->panel at the end of the iteration in mxsfb_create_output(). Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Breno Matheus Lima <brenomatheus@gmail.com> Tested-by:
Breno Lima <breno.lima@nxp.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Stefan Agner authored
The DRM subsystem specifies the pixel clock polarity from a controllers perspective: DRM_BUS_FLAG_PIXDATA_NEGEDGE means the controller drives the data on pixel clocks falling edge. That is the controllers DOTCLK_POL=0 (Default is data launched at negative edge). Also change the data enable logic to be high active by default and only change if explicitly requested via bus_flags. With that defaults are: - Data enable: high active - Pixel clock polarity: controller drives data on negative edge Signed-off-by:
Stefan Agner <stefan@agner.ch> Acked-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Stefan Agner authored
The LCD bus width does not need to align with the pixel format. The LCDIF controller automatically converts between pixel formats and bus width by padding or dropping LSBs. The DRM subsystem has the notion of bus_format which allows to determine what bus_formats are supported by the display. Choose the first available or fallback to 24 bit if none are available. Signed-off-by:
Stefan Agner <stefan@agner.ch> Acked-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
* 'drm-fixes-4.11' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: bump driver version for some new features drm/amdgpu: validate paramaters in the gem ioctl drm/amd/amdgpu: fix console deadlock if late init failed
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2017-03-09' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes flushing out gvt-g fixes * tag 'drm-intel-fixes-2017-03-09' of git://anongit.freedesktop.org/git/drm-intel: (29 commits) drm/i915/gvt: change some gvt_err to gvt_dbg_cmd drm/i915/gvt: protect RO and Rsvd bits of virtual vgpu configuration space drm/i915/gvt: handle workload lifecycle properly drm/i915/gvt: fix an error for F_RO flag drm/i915/gvt: use pfn_valid for better checking drm/i915/gvt: set SFUSE_STRAP properly for vitual monitor detection drm/i915/gvt: fix an error for one register drm/i915/gvt: add more registers into handlers list drm/i915/gvt: have more registers with F_CMD_ACCESS flags set drm/i915/gvt: add some new MMIOs to cmd_access white list drm/i915/gvt: fix pcode mailbox write emulation of BDW drm/i915/gvt: add resolution definition for vGPU type drm/i915/gvt: Add more edid definition support drm/i915/gvt: adjust to fixed vGPU types drm/i915/gvt: remove unnecessary error msg from gtt write drm/i915/gvt: refine pcode write emulation drm/i915/gvt: clear the vGPU reset logic drm/i915/gvt: decrease priority of output msg for untracked mmio drm/i915/gvt: set default value to 0 for unhandled mmio regs drm/i915/gvt: add cmd_access to GEN7_HALF_SLICE_CHICKEN1 ...
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Just 1 8bpc quirk from Ville, cc: stable * tag 'drm-misc-fixes-2017-03-06' of git://anongit.freedesktop.org/git/drm-misc: drm/edid: Add EDID_QUIRK_FORCE_8BPC quirk for Rotel RSX-1058
-
- 09 Mar, 2017 2 commits
-
-
Alex Deucher authored
We added new gem ioctl flags and the new fences ioctl, but forgot to bump the version. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Reject it if there are any invalid flags or domains. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- 08 Mar, 2017 4 commits
-
-
Jim Qu authored
Signed-off-by:
Jim Qu <Jim.Qu@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
https://github.com/01org/gvt-linuxJani Nikula authored
gvt-fixes-2017-03-08 - MMIO cmd access flag cleanup - Virtual display fixes from Weinan and Bing - config space reset fix from Changbin - better workload submission error path fix from Chuanxiao - other misc fixes Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
https://github.com/01org/gvt-linuxJani Nikula authored
gvt-next-2017-02-24 - Min's vGPU failsafe to guard against non-secured guest - Some guest warning fix and host error message cleanup - Fixed vGPU type refinement for usability issue - environ string fix from Takashi Iwai - one kernel oops fix from Chuanxiao - other misc fixes Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Tina Zhang authored
gvt_err should be used for dumping error message. This patch changes some gvt_err to gvt_dbg_cmd, as they are only debugging message, not errors. Signed-off-by:
Tina Zhang <tina.zhang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
- 06 Mar, 2017 3 commits
-
-
Changbin Du authored
Per PCI specification, Configuration Register has different types (RO, RW, RW1C, Rsvd). For RO Register bits are read-only and cannot be altered by software. For RW1C Register bits indicate status when read. A Set bit indicates a status event which is Cleared by writing a 1b. Writing a 0b to RW1C bits has no effect. Reserved Register is for future implementations, and they are read-only and must return zero when read. Current vGPU configuration write emulation just copy the value as it is. So we haven't emulated RO, RW1C and Rsvd Registers correctly. This patch is following the Spec to correct emulation logic. We add a function vgpu_cfg_mem_write to wrap the access to vGPU configuration memory. The write function uses a RW Register bitmap to avoid RO bits be overwritten, and emulate RW1C behavior for the particular status Register. v2: new = src[i] --> new = src[i] & mask (zhenyu) Signed-off-by:
Changbin Du <changbin.du@intel.com> Cc: Xiaoguang Chen <xiaoguang.chen@intel.com> Cc: Zhiyuan Lv <zhiyuan.lv@intel.com> Cc: Min He <min.he@intel.com> Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Chuanxiao Dong authored
Currently i915 has a request replay mechanism which can make sure the request can be replayed after a GPU reset. With this mechanism, gvt should wait until the GVT request seqno passed before complete the current workload. So that there should be a context switch interrupt come before gvt free the workload. In this way, workload lifecylce matches with the i915 request lifecycle. The workload can only be freed after the request is completed. v2: use gvt_dbg_sched instead of gvt_err to print when wait again Signed-off-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Tomeu Vizoso authored
Rotel RSX-1058 is a receiver with 4 HDMI inputs and a HDMI output, all 1.1. When a sink that supports deep color is connected to the output, the receiver will send EDIDs that advertise this capability, even if it isn't possible with HDMI versions earlier than 1.3. Currently the kernel is assuming that deep color is possible and the sink displays an error. This quirk will make sure that deep color isn't used with this particular receiver. Fixes: 7a0baa62 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170220152545.13153-1-tomeu.vizoso@collabora.com Cc: stable@vger.kernel.org Cc: Matt Horan <matt@matthoran.com> Tested-by:
Matt Horan <matt@matthoran.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99869Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
- 05 Mar, 2017 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix double-free in batman-adv, from Sven Eckelmann. 2) Fix packet stats for fast-RX path, from Joannes Berg. 3) Netfilter's ip_route_me_harder() doesn't handle request sockets properly, fix from Florian Westphal. 4) Fix sendmsg deadlock in rxrpc, from David Howells. 5) Add missing RCU locking to transport hashtable scan, from Xin Long. 6) Fix potential packet loss in mlxsw driver, from Ido Schimmel. 7) Fix race in NAPI handling between poll handlers and busy polling, from Eric Dumazet. 8) TX path in vxlan and geneve need proper RCU locking, from Jakub Kicinski. 9) SYN processing in DCCP and TCP need to disable BH, from Eric Dumazet. 10) Properly handle net_enable_timestamp() being invoked from IRQ context, also from Eric Dumazet. 11) Fix crash on device-tree systems in xgene driver, from Alban Bedel. 12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de Melo. 13) Fix use-after-free in netvsc driver, from Dexuan Cui. 14) Fix max MTU setting in bonding driver, from WANG Cong. 15) xen-netback hash table can be allocated from softirq context, so use GFP_ATOMIC. From Anoob Soman. 16) Fix MAC address change bug in bgmac driver, from Hari Vyas. 17) strparser needs to destroy strp_wq on module exit, from WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits) strparser: destroy workqueue on module exit sfc: fix IPID endianness in TSOv2 sfc: avoid max() in array size rds: remove unnecessary returned value check rxrpc: Fix potential NULL-pointer exception nfp: correct DMA direction in XDP DMA sync nfp: don't tell FW about the reserved buffer space net: ethernet: bgmac: mac address change bug net: ethernet: bgmac: init sequence bug xen-netback: don't vfree() queues under spinlock xen-netback: keep a local pointer for vif in backend_disconnect() netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups netfilter: nf_conntrack_sip: fix wrong memory initialisation can: flexcan: fix typo in comment can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer can: gs_usb: fix coding style can: gs_usb: Don't use stack memory for USB transfers ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines ixgbe: update the rss key on h/w, when ethtool ask for it ...
-
- 04 Mar, 2017 14 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more KVM updates from Radim Krčmář: "Second batch of KVM changes for the 4.11 merge window: PPC: - correct assumption about ASDR on POWER9 - fix MMIO emulation on POWER9 x86: - add a simple test for ioperm - cleanup TSS (going through KVM tree as the whole undertaking was caused by VMX's use of TSS) - fix nVMX interrupt delivery - fix some performance counters in the guest ... and two cleanup patches" * tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: Fix pending events injection x86/kvm/vmx: remove unused variable in segment_base() selftests/x86: Add a basic selftest for ioperm x86/asm: Tidy up TSS limit code kvm: convert kvm.users_count from atomic_t to refcount_t KVM: x86: never specify a sample period for virtualized in_tx_cp counters KVM: PPC: Book3S HV: Don't use ASDR for real-mode HPT faults on POWER9 KVM: PPC: Book3S HV: Fix software walk of guest process page tables
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "A few fixes for the docs tree, including one for a 4.11 build regression" * tag 'docs-4.11-fixes' of git://git.lwn.net/linux: Documentation/sphinx: fix primary_domain configuration docs: Fix htmldocs build failure doc/ko_KR/memory-barriers: Update control-dependencies section pcieaer doc: update the link Documentation: Update path to sysrq.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are a few small staging and IIO driver fixes for issues that showed up after the big set if changes you merged last week. Nothing major, just small bugs resolved in some IIO drivers, a lustre allocation fix, and some RaspberryPi driver fixes for reported problems, as well as a MAINTAINERS entry update. All of these have been in linux-next for a week with no reported issues" * tag 'staging-4.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: fsl-mc: fix warning in DT ranges parser MAINTAINERS: Remove Noralf Trønnes as fbtft maintainer staging: vchiq_2835_arm: Make cache-line-size a required DT property staging: bcm2835/mmal-vchiq: unlock on error in buffer_from_host() staging/lustre/lnet: Fix allocation size for sv_cpt_data iio: adc: xilinx: Fix error handling iio: 104-quad-8: Fix off-by-one error when addressing flag register iio: adc: handle unknow of_device_id data
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - vmalloc stack regression in CCM - Build problem in CRC32 on ARM - Memory leak in cavium - Missing Kconfig dependencies in atmel and mediatek - XTS Regression on some platforms (s390 and ppc) - Memory overrun in CCM test vector * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: vmx - Use skcipher for xts fallback crypto: vmx - Use skcipher for cbc fallback crypto: testmgr - Pad aes_ccm_enc_tv_template vector crypto: arm/crc32 - add build time test for CRC instruction support crypto: arm/crc32 - fix build error with outdated binutils crypto: ccm - move cbcmac input off the stack crypto: xts - Propagate NEED_FALLBACK bit crypto: api - Add crypto_requires_off helper crypto: atmel - CRYPTO_DEV_MEDIATEK should depend on HAS_DMA crypto: atmel - CRYPTO_DEV_ATMEL_TDES and CRYPTO_DEV_ATMEL_SHA should depend on HAS_DMA crypto: cavium - fix leak on curr if curr->head fails to be allocated crypto: cavium - Fix couple of static checker errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc final vfs updates from Al Viro: "A few unrelated patches that got beating in -next. Everything else will have to go into the next window ;-/" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: hfs: fix hfs_readdir() selftest for default_file_splice_read() infoleak 9p: constify ->d_name handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is the set of stuff that didn't quite make the initial pull and a set of fixes for stuff which did. The new stuff is basically lpfc (nvme), qedi and aacraid. The fixes cover a lot of previously submitted stuff, the most important of which probably covers some of the failing irq vectors allocation and other fallout from having the SCSI command allocated as part of the block allocation functions" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (59 commits) scsi: qedi: Fix memory leak in tmf response processing. scsi: aacraid: remove redundant zero check on ret scsi: lpfc: use proper format string for dma_addr_t scsi: lpfc: use div_u64 for 64-bit division scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m scsi: cciss: correct check map error. scsi: qla2xxx: fix spelling mistake: "seperator" -> "separator" scsi: aacraid: Fixed expander hotplug for SMART family scsi: mpt3sas: switch to pci_alloc_irq_vectors scsi: qedf: fixup compilation warning about atomic_t usage scsi: remove scsi_execute_req_flags scsi: merge __scsi_execute into scsi_execute scsi: simplify scsi_execute_req_flags scsi: make the sense header argument to scsi_test_unit_ready mandatory scsi: sd: improve TUR handling in sd_check_events scsi: always zero sshdr in scsi_normalize_sense scsi: scsi_dh_emc: return success in clariion_std_inquiry() scsi: fix memory leak of sdpk on when gd fails to allocate scsi: sd: make sd_devt_release() static scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework. ...
-
WANG Cong authored
Fixes: 43a0c675 ("strparser: Stream parser for messages") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Missing check for full sock in ip_route_me_harder(), from Florian Westphal. 2) Incorrect sip helper structure initilization that breaks it when several ports are used, from Christophe Leroy. 3) Fix incorrect assumption when looking up for matching with adjacent intervals in the nft_set_rbtree. 4) Fix broken netlink event error reporting in nf_tables that results in misleading ESRCH errors propagated to userspace listeners. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A fix and regression test case for nvdimm namespace label compatibility. Details: - An "nvdimm namespace label" is metadata on an nvdimm that provisions dimm capacity into a "namespace" that can host a block device / dax-filesytem, or a device-dax character device. A namespace is an object that other operating environment and platform firmware needs to comprehend for capabilities like booting from an nvdimm. The label metadata contains a checksum that Linux was not calculating correctly leading to other environments rejecting the Linux label. These have received a build success notification from the kbuild robot, and a positive test result from Nick who reported the problem" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit, libnvdimm: fix interleave set cookie calculation tools/testing/nvdimm: make iset cookie predictable
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - fix NULL pointer dereferences in many DesignWare-based drivers due to refactoring error - fix Altera config write breakage due to my refactoring error * tag 'pci-v4.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: altera: Fix TLP_CFG_DW0 for TLP write PCI: dwc: Fix crashes seen due to missing assignments
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes and cleanups from Helge Deller: "Nothing really important in this patchset: fix resource leaks in error paths, coding style cleanups and code removal" * 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Remove flush_user_dcache_range and flush_user_icache_range parisc: fix a printk parisc: ccio-dma: Handle return NULL error from ioremap_nocache parisc: Define access_ok() as macro parisc: eisa: Fix resource leaks in error paths parisc: eisa: Remove coding style errors
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull Xtensa updates from Max Filippov: - clean up bootable image build targets: provide separate 'Image', 'zImage' and 'uImage' make targets that only build corresponding image type. Make 'all' build all images appropriate for a platform - allow merging vectors code into .text section as a preparation step for XIP support - fix handling external FDT when the kernel is built without BLK_DEV_INITRD support * tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: allow merging vectors into .text section xtensa: clean up bootable image build targets xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. This includes two branches for arm64 dt updates, both following up on earlier changes for the same platforms that are already merged: Samsung: - add USB3 support in Exynos7 - minor PM related updates Amlogic: - new machines: WeTek Set-top-boxes - various devices added to DT There are also a couple of bugfixes that trickled in since the start of the merge window: - The moxart_defconfig was not building the intended platform - CPU-hotplug was broken on ux500 - Coresight was broken on Juno (never worked)" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: deconfig: fix the moxart defconfig ARM: ux500: resume the second core properly arm64: dts: juno: update definition for programmable replicator arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost arm64: dts: exynos: Add USB 3.0 controller node for Exynos7 arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7 pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e ARM64: dts: meson-gxbb-p200: add ADC laddered keys ARM64: dts: meson: meson-gx: add the SAR ADC ARM64: dts: meson-gxl: add the pwm_ao_b pin ARM64: dts: meson-gx: add the missing pwm_AO_ab node clk: gxbb: fix CLKID_ETH defined twice ARM64: dts: meson-gxl: rename Nexbox A95x for consistency clk: gxbb: add the SAR ADC clocks and expose them dt-bindings: amlogic: Add WeTek boards ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play dt-bindings: vendor-prefix: Add wetek vendor prefix ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull SMB3 fixes from Steve French: "Some small bug fixes as well as SMB2.1/SMB3 enablement for DFS (global namespace) which previously was only enabled for CIFS" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: smb2: Enforce sec= mount option CIFS: Fix sparse warnings CIFS: implement get_dfs_refer for SMB2+ CIFS: use DFS pathnames in SMB2+ Create requests CIFS: set signing flag in SMB2+ TreeConnect if needed CIFS: let ses->ipc_tid hold smb2 TreeIds CIFS: add use_ipc flag to SMB2_ioctl() CIFS: add build_path_from_dentry_optional_prefix() CIFS: move DFS response parsing out of SMB1 code CIFS: Fix possible use after free in demultiplex thread
-
- 03 Mar, 2017 5 commits
-
-
John Keeping authored
With Sphinx 1.5.3 I get the warning: WARNING: primary_domain 'C' not found, ignored. It seems that domain names in Sphinx are case-sensitive and for the C domain the name must be lower case. Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
Jonathan Corbet <corbet@lwn.net>
-
Martyn Welch authored
Build of HTML docs failing due to conversion of deviceiobook.tmpl in 8a8a602f and regulator.tmpl in 028f2533 to RST without removing from DOCBOOKS in Makefile, resulting (in the case of deviceiobook) the following error: make[1]: *** No rule to make target 'Documentation/DocBook/deviceiobook.xml', needed by 'Documentation/DocBook/deviceiobook.aux.xml'. Stop. Makefile:1452: recipe for target 'htmldocs' failed make: *** [htmldocs] Error 2 Update DOCBOOKS to reflect available books. Signed-off-by:
Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by:
Jonathan Corbet <corbet@lwn.net>
-
SeongJae Park authored
This commit applies upstream change, commit c8241f85 ("doc: Update control-dependencies section of memory-barriers.txt"), to Korean translation. Signed-off-by:
SeongJae Park <sj38.park@gmail.com> Signed-off-by:
Jonathan Corbet <corbet@lwn.net>
-
Cao jin authored
The original link is empty, replace it. Signed-off-by:
Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by:
Jonathan Corbet <corbet@lwn.net>
-
Krzysztof Kozlowski authored
Commit 9d85025b ("docs-rst: create an user's manual book") moved the sysrq.txt leaving old paths in the kernel docs. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Jonathan Corbet <corbet@lwn.net>
-