- 19 Nov, 2017 1 commit
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Misc fixes for 4.15. * 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: drm/amd/pp: fix dpm randomly failed on Vega10 drm/amdgpu: set f_mapping on exported DMA-bufs drm/amdgpu: Properly allocate VM invalidate eng v2 drm/amd/amdgpu: if visible VRAM allocation fail, fall back to invisible try again drm/amd/amdgpu: Fix wave mask in amdgpu_debugfs_wave_read() (v2) drm/amdgpu: make AMDGPU_VA_RESERVED_SIZE 64bit drm/amdgpu/gfx9: implement wave VGPR reading drm/amdgpu: Add common golden settings for GFX9 drm/amd/powerplay: fix copy-n-paste error on vddci_buf index drm/amdgpu: Fix null pointer issue in amdgpu_cs_wait_any_fence drm/amdgpu: Remove check which is not valid for certain VBIOS
-
- 15 Nov, 2017 1 commit
-
-
Rex Zhu authored
Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
- 14 Nov, 2017 3 commits
-
-
Christian König authored
Otherwise we can't correctly CPU map TTM buffers. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
-
ozeng authored
v1: Properly allocate TLB invalidation engine to avoid conflict. v2: Added comments to codes Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Reviewed-by:
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next - Improved HDMI and Mixer drivers . It moves mode setup and plane update code to commit like other CRTC drivers . It makes mode commit to be called in enable callback only one time . some cleanup and fixup to HDMI and Mixer drivers. . It adds 1024x768, 1280x1024 and 1366x768 modes support - Added HDMI audio interface driver . As of now, HDMI audio worked on boards with external audio codec connected in parallel with the HDMI audio transmitter's I2S interface. This patch is required to support HDMI audio properly. * tag 'exynos-drm-next-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm: exynos: Add driver for HDMI audio interface drm/exynos/hdmi: add 85.5MHz pixel clock for v14 HDMI PHY drm/exynos/mixer: enable support for 1024x768 and 1280x1024 modes drm/exynos/hdmi: quirk for support mode timings conversion drm/exynos/mixer: pass actual mode on MIXER to encoder drm/exynos: add mode_fixup callback to exynos_drm_crtc_ops drm/exynos/hdmi: remove redundant mode field drm/exynos/mixer: remove mixer_resources sub-structure drm/exynos/mixer: fix mode validation code drm/exynos/mixer: move resolution configuration to single function drm/exynos/mixer: move mode commit to enable callback drm/exynos/mixer: abstract out output mode setup code
-
- 13 Nov, 2017 10 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
This is a shared tree between drm and audio for some amd bits. * 'linus-4.14-rc4-acp-prereq' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu Moving amdgpu asic types to a separate file ASoC: AMD: Added asic_type as ACP DMA driver platform data drm/amd/amdgpu: Added asic_type as ACP DMA driver platform data
-
Roger He authored
Reviewed-by:
Roger He <Hongbo.He@amd.com> Signed-off-by:
-
Tom St Denis authored
The bottom two bits of the simd value were being put into the upper bits of the wave value which was likely working due to the bits being ignored (or aliased). Eitherway, now we mask it correctly. (v2) Touch up using GENMASK_ULL to a couple of other functions too Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Christian König authored
Even when it's a small handle it as 64bit value as well. Signed-off-by:
-
Nicolai Hähnle authored
This is already hooked up to the "amdgpu_gpr" debugfs file used by the umr userspace debugging tool. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Acked-by:
-
Ken Wang authored
Signed-off-by:
Ken Wang <Ken.Wang@amd.com> Reviewed-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Driver Changes: - qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd) - rockchip: Convert psr spinlock to mutex (Emil) Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Gerd Hoffmann <kraxel@redhat.com> * tag 'drm-misc-fixes-2017-11-13' of git://anongit.freedesktop.org/drm/drm-misc: drm/rockchip: analogix_dp: Use mutex rather than spinlock
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2017-11-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 fixes for v4.15 * tag 'drm-intel-next-fixes-2017-11-10' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Driver Changes: - qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd) * tag 'drm-misc-fixes-2017-11-02' of git://anongit.freedesktop.org/drm/drm-misc: qxl: alloc & use shadow for dumb buffers drm/qxl: replace QXL_INFO with DRM_DEBUG_DRIVER
-
Emil Renner Berthing authored
On the Samsung Chromebook Plus I get this error with 4.14-rc3: BUG: scheduling while atomic: kworker/3:1/50/0x00000002 Modules linked in: CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 4.14.0-0.rc3-kevin #2 Hardware name: Google Kevin (DT) Workqueue: events analogix_dp_psr_work Call trace: [<ffffff80080873b0>] dump_backtrace+0x0/0x320 [<ffffff80080876e4>] show_stack+0x14/0x20 [<ffffff8008606d38>] dump_stack+0x9c/0xbc [<ffffff80080c6b5c>] __schedule_bug+0x4c/0x70 [<ffffff80086188c0>] __schedule+0x3f0/0x458 [<ffffff8008618960>] schedule+0x38/0xa0 [<ffffff800861c20c>] schedule_hrtimeout_range_clock+0x84/0xe8 [<ffffff800861c2a0>] schedule_hrtimeout_range+0x10/0x18 [<ffffff800861bcec>] usleep_range+0x64/0x78 [<ffffff8008415a6c>] analogix_dp_transfer+0x16c/0x340 [<ffffff8008412550>] analogix_dpaux_transfer+0x10/0x18 [<ffffff80083ceb14>] drm_dp_dpcd_access+0x4c/0xf0 [<ffffff80083cf614>] drm_dp_dpcd_write+0x1c/0x28 [<ffffff8008413b98>] analogix_dp_disable_psr+0x60/0xa8 [<ffffff800840da3c>] analogix_dp_psr_work+0x4c/0x90 [<ffffff80080bb09c>] process_one_work+0x1d4/0x348 [<ffffff80080bb258>] worker_thread+0x48/0x478 [<ffffff80080c11fc>] kthread+0x12c/0x130 [<ffffff8008084290>] ret_from_fork+0x10/0x18 Changing rockchip_dp_device::psr_lock to a mutex rather than spinlock seems to fix the issue. Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Tested-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Mark Yao <mark.yao@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004175346.11956-1-kernel@esmil.dk
-
- 10 Nov, 2017 1 commit
-
-
Dave Airlie authored
The lease updates missed a few bits of docs, fixed up the wrong name on the property lookup fn as well. Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 09 Nov, 2017 14 commits
-
-
Colin Ian King authored
The index to vddci_buf is using profile->ucElbVDDC_Num rather than profile->ucElbVDDCI_Num; this looks like a copy-n-paste error from previous code for the vddc_buf array and I'm pretty sure this is incorrect. Fix this by using the correct variable. Detected by CoverityScan, CID#1457172 ("Copy-paste error") Fixes: 970d9804 ("drm/amd/powerplay: Add support functions for CI to ppatomctrl.c") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Emily Deng authored
The array[first] may be null when the fence has already been signaled. BUG: SWDEV-136239 Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Reviewed-by:
-
Ken Wang authored
Fixes vbios fetching on certain headless boards. Signed-off-by:
-
Chris Wilson authored
When we close the VMA, we unbind it from the ppgtt and tear down the page directory pointing at it. That may trigger us to return WC pages back to the system, requiring conversion back to WB which itself may sleep. That makes i915_vma_close() unsuitable for use inside the RCU read lock, which we need to hold to iterate the radixtree. The fix is quite simple, we can close all the VMA as we close the ppgtt, we only need to do that instead of closing them during destruction of the LUT. v2: Order between closing the LUT and the ppgtt is important; we use the vma inside the LUT as a means of retrieving the object, and so we must clear the LUT before freeing the VMA when closing the ppgtt. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103638 Fixes: 547da76b ("drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr)") Fixes: d1b48c1e ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109085540.32264-1-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit 94dec871) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Apparently setting up a bunch of GT registers before we've properly initialized the rest of the GT hardware leads to these setting being lost. So looks like I broke HSW with commit b7048ea1 ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks") by doing init_clock_gating() too early. This should actually affect other platforms as well, but apparently not to such a great degree. What I was ultimately after in that commit was to move the ilk_init_lp_watermarks() call earlier. So let's undo the damage and move init_clock_gating() back to where it was, and call ilk_init_lp_watermarks() just before the watermark state readout. This highlights how fragile and messed up our init order really is. I wonder why we even initialize the display before gem. The opposite order would make much more sense to me... v2: Keep WaRsPkgCStateDisplayPMReq:hsw early as it really must be done before all planes might get disabled. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mark Janes <mark.a.janes@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reported-by:
Mark Janes <mark.a.janes@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103549 Fixes: b7048ea1 ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks") References: https://lists.freedesktop.org/archives/intel-gfx/2017-November/145432.htmlSigned-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171108133555.14091-1-ville.syrjala@linux.intel.comTested-by:
-
Chris Wilson authored
The shared fence array is not autopruning and may continue to grow as an object is shared between new timelines. Take the opportunity when we think the object is idle (we have to confirm that any external fence is also signaled) to decouple all the fences. We apply a similar trick after waiting on an object, see commit e54ca977 ("drm/i915: Remove completed fences after a wait") v2: No longer need to handle the batch pool as a special case. v3: Need to trylock from within i915_vma_retire as this may be called form the shrinker - and we may later try to allocate underneath the reservation lock, so a deadlock is possible. References: https://bugs.freedesktop.org/show_bug.cgi?id=102936 Fixes: d07f0e59 ("drm/i915: Move GEM activity tracking into a common struct reservation_object") Fixes: 80b204bc ("drm/i915: Enable multiple timelines") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 1ab22356) Signed-off-by:
-
Chris Wilson authored
The handling of contexts are peculiar. Instead of tieing their vma to activity, we pin the context. This means that we cannot simply unbind the context object itself at will (which would normally cause us to wait for the vma to be idle), but must manually idle the GPU and retire requests first. A consequence of this peculiarity is when doing a last desperate attempt to recover memory. If the memory is tied up inside active context objects, we will fail to recover any memory simply by trying to unbind the objects without first doing a wait-for-idle. A side-effect of removing the call to shrinker_lock_uninterruptible() from i915_gem_shrinker_oom() was that we removed an unlocked wait-for-idle, and so lost the "natural" shrinkage of context objects. By replacing that with a locked wait from inside i915_gem_shrink(), we not only replace it with the ability to recover all context objects, but do so for all i915_gem_shrink_all() callers. v2: Switching requires request allocation, which is not permitted from inside the shrinker as it only uses ordinary allocations. References: https://bugs.freedesktop.org/show_bug.cgi?id=102936 Fixes: f2123818 ("drm/i915: Move dev_priv->mm.[un]bound_list to its own lock") Signed-off-by:
-
Chris Wilson authored
An oversight in commit 87701b4b ("drm/i915: Only free the oldest stale object before a fresh allocation") was that not only do we have to serialise concurrent users of llist_del_first(), but we also have to lock llist_del_first() vs llist_del_all(). From llist.h, * This can be summarized as follows: * * | add | del_first | del_all * add | - | - | - * del_first | | L | L * del_all | | | - * * Where, a particular row's operation can happen concurrently with a column's * operation, with "-" being no lock needed, while "L" being lock is needed. This should hopefully explain: <4>[ 89.287106] general protection fault: 0000 [#1] PREEMPT SMP <4>[ 89.287126] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp i915 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core r8169 mii mei_me mei snd_pcm prime_numbers i2c_hid pinctrl_geminilake pinctrl_intel <4>[ 89.287226] CPU: 2 PID: 23 Comm: ksoftirqd/2 Tainted: G U 4.14.0-rc8-CI-CI_DRM_3315+ #1 <4>[ 89.287247] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4>[ 89.287270] task: ffff88017ab34ec0 task.stack: ffffc90000128000 <4>[ 89.287290] RIP: 0010:llist_add_batch+0x4/0x20 <4>[ 89.287301] RSP: 0018:ffffc9000012bdb8 EFLAGS: 00010296 <4>[ 89.287314] RAX: ffffffff811017ad RBX: 6e468801a1560000 RCX: ef3e53fceecdeb81 <4>[ 89.287330] RDX: 6e468801a1566130 RSI: ffff880103d73d98 RDI: ffff880103d73d98 <4>[ 89.287346] RBP: ffffc9000012bdb8 R08: ffff88017ab35780 R09: 0000000000000000 <4>[ 89.287361] R10: ffffc9000012bd68 R11: 00000000abb18c3d R12: ffffffffa01369e0 <4>[ 89.287377] R13: ffff88017fd1b8f8 R14: ffff88017ab34ec0 R15: 000000000000000a <4>[ 89.287393] FS: 0000000000000000(0000) GS:ffff88017fd00000(0000) knlGS:0000000000000000 <4>[ 89.287411] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 89.287424] CR2: 00007ff0c0755018 CR3: 000000016df9b000 CR4: 00000000003406e0 <4>[ 89.287440] Call Trace: <4>[ 89.287511] __i915_gem_free_object_rcu+0x20/0x40 [i915] <4>[ 89.287527] rcu_process_callbacks+0x27a/0x730 <4>[ 89.287544] __do_softirq+0xc0/0x4ae <4>[ 89.287559] ? smpboot_thread_fn+0x2d/0x280 <4>[ 89.287571] run_ksoftirqd+0x1f/0x70 <4>[ 89.287582] smpboot_thread_fn+0x18a/0x280 <4>[ 89.287595] kthread+0x114/0x150 <4>[ 89.287605] ? sort_range+0x30/0x30 <4>[ 89.287615] ? kthread_create_on_node+0x40/0x40 <4>[ 89.287628] ret_from_fork+0x27/0x40 <4>[ 89.287641] Code: 0d 48 83 ea 01 4c 89 c1 48 83 fa ff 74 12 48 23 0c d7 74 ed 48 c1 e2 06 48 0f bd c9 48 8d 04 0a 5d c3 90 90 90 90 90 55 48 89 e5 <48> 8b 0a 48 89 0e 48 89 c8 f0 48 0f b1 3a 48 39 c1 75 ed 48 85 <1>[ 89.287774] RIP: llist_add_batch+0x4/0x20 RSP: ffffc9000012bdb8 <4>[ 89.287826] ---[ end trace e775d15174d8ae02 ]--- (Lockless lists are only easy (and lockless) when only using llist_add/llist_del_all!) Fixes: 87701b4b ("drm/i915: Only free the oldest stale object before a fresh allocation") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> (cherry picked from commit f991c492) Signed-off-by:
-
Maarten Lankhorst authored
The watermarks it should calculate against are the old optimal watermarks. The currently active crtc watermarks are pure fiction, and are invalid in case of a nonblocking modeset, page flip enabling/disabling planes or any other reason. When the crtc is disabled or during a modeset the intermediate watermarks don't need to be programmed separately, and could be directly assigned to the optimal watermarks. Changes since v1: - Use intel_atomic_get_old_crtc_state. (ville) Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-2-maarten.lankhorst@linux.intel.com [mlankhorst: Add cc stable and bugzilla link, since previous patch doesn't fix issue by itself] Cc: stable@vger.kernel.org #v4.8+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373 (cherry picked from commit b6b178a7) Signed-off-by:
-
Joonas Lahtinen authored
When running under virtualization (vGPU active), we must disable the lazy PPGTT page table initialization optimization introduced by commit 14826673 ("drm/i915: Only initialize partially filled pagetables"). We must do this because GVT-g makes unduly assumptions about guest behaviour, which this optimization breaks. This results in following looking errors in the host: ERROR gvt: guest page write error -22, gfn 0x7ada8, pa 0x7ada89a8, var 0x6, len 1 The real fix is to not to depend on i915 driver behaviour, but instead either rely on only the contracts that i915 has with the hardware, or add some paravirtualization. While the real fix is en route, it won't be finished in time for 4.15, so the best option is to disable the optimization for now when vGPU is active to avoid breaking 4.15 guests in existing VM environments. Fixes: 14826673 ("drm/i915: Only initialize partially filled pagetables") Suggested-by:
Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023153209.10527-1-joonas.lahtinen@linux.intel.com (cherry picked from commit 22a8a4fc) Signed-off-by:
-
Chris Wilson authored
Originally we set the priority to max upon inserting the request into the execlists queue (and removing it from the scheduler lists). We could then use the prio==INT_MAX as a shortcut within execlists_schedule() to detect the end of the dependency chain. Since commit 1f181225 ("drm/i915/execlists: Keep request->priority for its lifetime") this is no longer true as we use the request completion as an indicator the schedule dependency chain is complete instead. (This allows us to then reschedule requests even when its context is in flight.) However, this makes the GEM_BUG_ON() inside execlists_schedule() racy as we may change the rq->prio at the same time. As the assertion is useful, let's keep the assertion and remove the micro-optimisation. Fixes: 1f181225 ("drm/i915/execlists: Keep request->priority for its lifetime") Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> (cherry picked from commit 64b80085) Signed-off-by:
-
Chris Wilson authored
Back in commit a4b2b015 ("drm/i915: Don't mark an execlists context-switch when idle") we noticed the presence of late context-switch interrupts. We were able to filter those out by looking at whether the ELSP remained active, but in commit beecec90 ("drm/i915/execlists: Preemption!") that became problematic as we now anticipate receiving a context-switch event for preemption while ELSP may be empty. To restore the spurious interrupt suppression, add a counter for the expected number of pending context-switches and skip if we do not need to handle this interrupt to make forward progress. v2: Don't forget to switch on for preempt. v3: Reduce the counter to a on/off boolean tracker. Declare the HW as active when we first submit, and idle after the final completion event (with which we confirm the HW says it is idle), and track each source of activity separately. With a finite number of sources, it should aide us in debugging which gets stuck. Fixes: beecec90 ("drm/i915/execlists: Preemption!") Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2017-11-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next 4.15 merge window fixes, round 2: randconfig fix from Arnd, plus the vblank WARN_ON fix from Ville. * tag 'drm-misc-next-fixes-2017-11-08' of git://anongit.freedesktop.org/drm/drm-misc: drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A few more fixes for 4.15. * 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
-
- 08 Nov, 2017 4 commits
-
-
pding authored
This lock is used during register accessing in SRIOV guest. The register accessing could happen both in irq enabled and irq disabled cases. Always use irq-safe lock. Signed-off-by:
Pixel Ding <Pixel.Ding@amd.com> Reviewed-by:
-
Pixel Ding authored
KIQ ring submission is used for register accessing on SRIOV VF that could happen both in irq enabled and irq disabled cases. Inversion lock could happen on adev->ring_lru_list_lock, while this operation is useless and just adds overhead in this use case. Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
-
Dan Carpenter authored
After commit ea09729c ("drm/amdgpu: rework page directory filling v2") then it becomes a lot harder to verify that "r" is initialized. My static checker complains and so I've reviewed the code. It does look like it might be buggy... Anyway, it doesn't hurt to set "r" to zero at the start. Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
We shifted some code around in commit 9cca0b8e ("drm/amdgpu: move amdgpu_cs_sysvm_access_required into find_mapping") and now my static checker complains that "r" might not be initialized at the end of the function. I've reviewed the code, and that seems possible, but it's also possible I may have missed something. Reviewed-by:
-
- 07 Nov, 2017 5 commits
-
-
Nicolas Iooss authored
Function vega10_apply_state_adjust_rules() only initializes stable_pstate_sclk_dpm_percentage when data->registry_data.stable_pstate_sclk_dpm_percentage is not between 1 and 100. The variable is then used to compute stable_pstate_sclk, which therefore uses an uninitialized value. Fix this by initializing stable_pstate_sclk_dpm_percentage to data->registry_data.stable_pstate_sclk_dpm_percentage. This issue has been found while building the kernel with clang. The compiler reported a -Wsometimes-uninitialized warning. Reviewed-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
-
Evan Quan authored
Signed-off-by:
Evan Quan <evan.quan@amd.com> Tested-and-Acked-by:
-
Roger He authored
Reviewed-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2017-11-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next Fixes for 4.15 merge window: Just the cherry-picked vc4 fix plus a GFP_NOFAIL annotation (there's apparently some new options in-flight to change/audit too-small-to-fail kmalloc semantics or something like that). * tag 'drm-misc-next-fixes-2017-11-07' of git://anongit.freedesktop.org/drm/drm-misc: drm/vc4: Fix wrong printk format in vc4_bo_stats_debugfs() drm: Require __GFP_NOFAIL for the legacy drm_modeset_lock_all
-
Ville Syrjälä authored
Since commit 632c6e4e ("drm/vblank: Fix flip event vblank count") even drivers that don't implement accurate vblank timestamps will end up using drm_crtc_accurate_vblank_count(). That leads to a WARN every time drm_crtc_arm_vblank_event() gets called. The could be as often as every frame for each active crtc. Considering drm_crtc_accurate_vblank_count() is never any worse than the drm_vblank_count() we used previously, let's just skip the WARN unless DRM_UT_VBL is enabled. That way people won't be bothered by this unless they're debugging vblank code. And let's also change it to WARN_ONCE() so that even when you're debugging vblank code you won't get drowned by constant WARNs. Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel@ffwll.ch> Cc: "Szyprowski, Marek" <m.szyprowski@samsung.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Reported-by:
Andrzej Hajda <a.hajda@samsung.com> Fixes: 632c6e4e ("drm/vblank: Fix flip event vblank count") Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by:
-
- 06 Nov, 2017 1 commit
-
-
Arnd Bergmann authored
Build-testing on randconfig kernels revealed a dependency in the newly added lvds sub-driver: drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_bind': drivers/gpu/drm/rockchip/rockchip_lvds.c:380:24: error: 'struct drm_bridge' has no member named 'of_node' remote = lvds->bridge->of_node; We could work around that in the code, adding a Kconfig dependency seems easier. Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171106135852.1355487-1-arnd@arndb.de
-
