- 30 Dec, 2008 40 commits
-
-
Jaime Velasco Juan authored
This patch implements VIDIOC_ENUM_FRAMESIZES, it is used at least by gstreamer. Signed-off-by:
Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
dib7000p.h defines a few extern symbols when CONFIG_DVB_DIB7000P is not set. since the header is used on more than one driver, this causes symbol duplication, as pointed by Ingo Molnar <mingo@elte.hu>: drivers/media/dvb/built-in.o: In function `dib7000p_set_gpio': (.text+0x3f242): multiple definition of `dib7000p_set_gpio' drivers/media/video/built-in.o:(.text+0xb8c1e): first defined here drivers/media/dvb/built-in.o: In function `dib7000p_i2c_enumeration': (.text+0x3f282): multiple definition of `dib7000p_i2c_enumeration' drivers/media/video/built-in.o:(.text+0xb8c3e): first defined here drivers/media/dvb/built-in.o: In function `dib7000p_set_wbd_ref': (.text+0x3f1c1): multiple definition of `dib7000p_set_wbd_ref' drivers/media/video/built-in.o:(.text+0xb8bfe): first defined here LD drivers/net/built-in.o make[2]: *** [drivers/media/built-in.o] Error 1 Cc: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: -
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Drivers that use v4l2_device can set that as parent pointer in the v4l2_dev field instead of using the struct device parent field. This allows v4l2-dev.c to check whether this driver is v4l2_device based, and if so then it can offer additional services. Signed-off-by:
-
Hans Verkuil authored
Instead of relying on the cdev release callback we should rely on the release callback from the device struct. This requires that we use get_device/put_device to do proper refcounting. In order to do this safely v4l2-dev.c now sets up its own file_operations that call out to the driver's ops. Signed-off-by:
-
Jiri Slaby authored
usbvideo_ClientIncModCount may return value < 0 in the case of error, not > 0. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Hans Verkuil authored
Converted to v4l2_subdev. While doing that I also discovered a stray 'break' that broke the S_CTRL handling. Fixed that as well. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
The em28xx driver can be coupled to an anciliary AC97 chip. This patch allows read/write AC97 registers directly. Signed-off-by: -
Hans Verkuil authored
The comment said CX2584X instead of CX2341X. Signed-off-by:
-
Hans Verkuil authored
Add the missing video_device documentation to v4l2-framework.txt. Signed-off-by:
-
Hans Verkuil authored
get_index requires a valid parent device in order to discover which indices are in use. Some drivers (e.g. pvrusb2) do not set the parent device. In that case just return 0. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The bt832 i2c driver was never used or even compiled and is no longer maintained. It is now removed completely. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Andy Walls authored
Use a consistent crystal value of 28.636360 MHz for computing all PLL parameters so clocks don't have relative error due to assumed crystal value mismatches. Also aimed to have all PLLs run their VOCs at close to 400 MHz to minimze the error of these PLLs as frequency synthesizers. Also set the VDCLK and AIMCLK PLLs to sane values before the APU and CPU firmware are loaded. Also fixed I2S Master clock dividers. Many thanks to Mike Bradley and Jeff Campbell for reporting this problem and suggesting the solution, researching and experimenting, and performing extensive testing to support their suggested solution. Reported-by:
Jeff Campbell <jac1dlists@gmail.com> Reported-by:
Mike Bradley <mike.bradley@incanetworks.com> Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
Disable AV_LOCK, locking of audio PLL to video PLL in the cx18-av-core for analog captures. It seems to have adverse effects on captures from SVideo and CVBS sources with current clock & crystal settings in the driver. Many thanks to Jeff Campbell and Mike Bradley for reporting this problem, and suggesting the solution and performing extensive testing to support their suggestion. Reported-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Added all missing v4l1/2 ioctls and fix several broken conversions. Partially based on work done by Cody Pisto <cpisto@gmail.com>. Tested-by:
Brandon Jenkins <bcjenkins@tvwhere.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
vidioc_g_ctrl() were using an uneeded confusing logic. Instead, use the direct approach. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Alan Nisota authored
This patch converts the gp8psk module to use the S2API. It pretends to be DVB-S2 capable in order to allow the various supported modulations (8PSK, QPSK-Turbo, etc), and keep software compatibility with the S2API patches for Mythtv and VDR. Signed-off by: Alan Nisota <alannisota@gmail.com> Signed-off-by: -
Mauro Carvalho Chehab authored
This patch uses the same code for enumberating video formats that are present on cx88, bttv and saa7134 drivers. Signed-off-by: -
Mauro Carvalho Chehab authored
The changeset 78aa52a159cf introduced a bug on em28xx: buffer setup should be awaking xc3028. Instead, since we didn't specify the tuner mode, the device were going to sleep, due to the lack of tuner mode when asking tuner to handle VIDIOC_S_FREQUENCY: xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 xc2028 0-0061: divisor= 00 00 14 d0 (freq=83.250) xc2028 0-0061: Putting xc2028/3028 into poweroff mode. xc2028 0-0061: Printing sleep stack trace: Pid: 10936, comm: mplayer Tainted: P M 2.6.27.8 #1 Call Trace: [<ffffffffa0b759ea>] xc2028_sleep+0x89/0x1ab [tuner_xc2028] [<ffffffffa0b48fb9>] tuner_s_frequency+0xf5/0x165 [tuner] Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Devin Heitmueller authored
The init_fw option was broken for the HVR-950q because we would call the reset callback inside of dvb_attach() and the callback had not been setup yet. Michael Krufky (who added the init_fw feature) says it's no longer required, so just remove the option completely. Thanks to user Zzeiss from #linuxtv chat for reporting the issue and Michael Krufky <mkrufky@linuxtv.org> for proposing the fix. Signed-off-by:
Devin Heitmueller <dheitmueller@linuxtv.org> Acked-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Devin Heitmueller authored
Don't operate under the assumption that every device that uses the em2820 default USB ID is a Prolink PlayTV USB. We have an eeprom hash, so use that, since otherwise we cannot support other devices with the 2820 default USB ID (such as the ADS Tech Instant TV USB USBAV-704) Signed-off-by:
-
Devin Heitmueller authored
Add the em2870 to the list of known em28xx chip ids. Signed-off-by:
-
Darron Broad authored
This cleans-up the advise/acquire methods. This has been tested on the hvr-1300/4000 and assumed to be correct on the hvr-3000. This update also fixes analogue tuning on the hvr-1300 when in blackbird mode. Signed-off-by:
Darron Broad <darron@kewl.org> Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
