- 13 Apr, 2012 6 commits
-
-
Kenth Eriksson authored
[ Upstream commit 464b57da ] The merge done in commit b26e478f undid bug fix in commit c3e072f8 ("net: fsl_pq_mdio: fix non tbi phy access"), with the result that non TBI (e.g. MDIO) PHYs cannot be accessed. Signed-off-by:
Kenth Eriksson <kenth.eriksson@transmode.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rabin Vincent authored
[ Upstream commit 78fb72f7 ] Make CDC EEM recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1494 bytes, and the host is unable to receive standard 1500-byte frames from the device. Tested with the Linux USB Ethernet gadget. Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
-
danborkmann@iogearbox.net authored
[ Upstream commit 81213b5e ] If both addresses equal, nothing needs to be done. If the device is down, then we simply copy the new address to dev->dev_addr. If the device is up, then we add another loopback device with the new address, and if that does not fail, we remove the loopback device with the old address. And only then, we update the dev->dev_addr. Signed-off-by:
Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Signed-off-by:
-
Lino Sanfilippo authored
[ Upstream commit 2240eb4a ] This patch corrects a bug in function sky2_open() of the Marvell Yukon 2 driver in which the settings for PHY quick link are overwritten. Signed-off-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by:
Stephen Hemminger <shemminger@vyattta.com> Signed-off-by:
-
Matt Carlson authored
[ Upstream commit 085f1afc ] If port 0 of a 5717 serdes device powers down, it hides the phy from port 1. This patch works around the problem by keeping port 0's phy powered up. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
zhuangfeiran@ict.ac.cn authored
[ Upstream commit 1d24fb36 ] When K >= 0xFFFF0000, AND needs the two least significant bytes of K as its operand, but EMIT2() gives it the least significant byte of K and 0x2. EMIT() should be used here to replace EMIT2(). Signed-off-by:
Feiran Zhuang <zhuangfeiran@ict.ac.cn> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
- 02 Apr, 2012 34 commits
-
-
Greg Kroah-Hartman authored
-
Matthew Garrett authored
commit c9651e70 upstream. Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON. Some other systems using the pata_jmicron driver fail to boot because no disks are detected. Passing pcie_aspm=force on the kernel command line works around it. The cause: commit 4949be16 ("PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to always return 0 if aspm is disabled, in order to avoid cases where we changed ASPM state on pre-PCIe 1.1 devices. This skipped the secondary function of pcie_aspm_sanity_check which was to avoid us enabling ASPM on devices that had non-PCIe children, causing trouble later on. Move the aspm_disabled check so we continue to honour that scenario. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and http://bugs.debian.org/665420 Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble Signed-off-by:
Matthew Garrett <mjg@redhat.com> Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520 Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363 [jn: with more symptoms in log message] Signed-off-by:
Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yoshii Takashi authored
commit 49d4bcad upstream. When DMA is enabled, sh-sci transfer begins with uart_start() sci_start_tx() if (cookie_tx < 0) schedule_work() Then, starts DMA when wq scheduled, -- (A) process_one_work() work_fn_rx() cookie_tx = desc->submit_tx() And finishes when DMA transfer ends, -- (B) sci_dma_tx_complete() async_tx_ack() cookie_tx = -EINVAL (possible another schedule_work()) This A to B sequence is not reentrant, since controlling variables (for example, cookie_tx above) are not queues nor lists. So, they must be invoked as A B A B..., otherwise results in kernel crash. To ensure the sequence, sci_start_tx() seems to test if cookie_tx < 0 (represents "not used") to call schedule_work(). But cookie_tx will not be set (to a cookie, also means "used") until in the middle of work queue scheduled function work_fn_tx(). This gap between the test and set allows the breakage of the sequence under the very frequently call of uart_start(). Another gap between async_tx_ack() and another schedule_work() results in the same issue, too. This patch introduces a new condition "cookie_tx == 0" just to mark it is "busy" and assign it within spin-locked region to fill the gaps. Signed-off-by:
Takashi Yoshii <takashi.yoshii.zj@renesas.com> Reviewed-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Dan Carpenter authored
commit 6d8d1749 upstream. There is no point in passing a zero length string here and quite a few of that cache_parse() implementations will Oops if count is zero. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
John Stultz authored
commit 4a649903 upstream. Richard Weinberger noticed that on some RTC hardware that doesn't support UIE mode, due to coarse granular alarms (like 1minute resolution), the current virtualized RTC support doesn't properly error out when UIE is enabled. Instead the current code queues an alarm for the next second, but it won't fire until up to a miniute later. This patch provides a generic way to flag this sort of hardware and fixes the issue on the mpc5121 where Richard noticed the problem. Reported-by:
Richard Weinberger <richard@nod.at> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Chris Metcalf authored
commit 1631fcea upstream. <asm-generic/unistd.h> was set up to use sys_sendfile() for the 32-bit compat API instead of sys_sendfile64(), but in fact the right thing to do is to use sys_sendfile64() in all cases. The 32-bit sendfile64() API in glibc uses the sendfile64 syscall, so it has to be capable of doing full 64-bit operations. But the sys_sendfile() kernel implementation has a MAX_NON_LFS test in it which explicitly limits the offset to 2^32. So, we need to use the sys_sendfile64() implementation in the kernel for this case. Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Dan Carpenter authored
commit 8f0750f1 upstream. These are used as offsets into an array of GDT_ENTRY_TLS_ENTRIES members so GDT_ENTRY_TLS_ENTRIES is one past the end of the array. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Alok Kataria authored
commit 57779dc2 upstream. While running the latest Linux as guest under VMware in highly over-committed situations, we have seen cases when the refined TSC algorithm fails to get a valid tsc_start value in tsc_refine_calibration_work from multiple attempts. As a result the kernel keeps on scheduling the tsc_irqwork task for later. Subsequently after several attempts when it gets a valid start value it goes through the refined calibration and either bails out or uses the new results. Given that the kernel originally read the TSC frequency from the platform, which is the best it can get, I don't think there is much value in refining it. So for systems which get the TSC frequency from the platform we should skip the refined tsc algorithm. We can use the TSC_RELIABLE cpu cap flag to detect this, right now it is set only on VMware and for Moorestown Penwell both of which have there own TSC calibration methods. Signed-off-by:
Alok N Kataria <akataria@vmware.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Dirk Brandewie <dirk.brandewie@gmail.com> Cc: Alan Cox <alan@linux.intel.com> [jstultz: Reworked to simply not schedule the refining work, rather then scheduling the work and bombing out later] Signed-off-by:
-
NeilBrown authored
commit de5b8e8e upstream. If you try to set grace_period or timeout via a module parameter to lockd, and do this on a big-endian machine where sizeof(int) != sizeof(unsigned long) it won't work. This number given will be effectively shifted right by the difference in those two sizes. So cast kp->arg properly to get correct result. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 1265fd61 ] We call the wrong replay notify function when we use ESN replay handling. This leads to the fact that we don't send notifications if we use ESN. Fix this by calling the registered callbacks instead of xfrm_replay_notify(). Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
stephen hemminger authored
[ Upstream commit 5676cc7b ] Some BIOS's don't setup power management correctly (what else is new) and don't allow use of PCI Express power control. Add a special exception module parameter to allow working around this issue. Based on slightly different patch by Knut Petersen. Reported-by:
Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Dave Jones authored
[ Upstream commit a6506e14 ] no socket layer outputs a message for this error and neither should rds. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2a2a459e ] napi->skb is allocated in napi_get_frags() using netdev_alloc_skb_ip_align(), with a reserve of NET_SKB_PAD + NET_IP_ALIGN bytes. However, when such skb is recycled in napi_reuse_skb(), it ends with a reserve of NET_IP_ALIGN which is suboptimal. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 94f826b8 ] Commit f2c31e32 (net: fix NULL dereferences in check_peer_redir() ) added a regression in rt6_fill_node(), leading to rcu_read_lock() imbalance. Thats because NLA_PUT() can make a jump to nla_put_failure label. Fix this by using nla_put() Many thanks to Ben Greear for his help Reported-by:
Ben Greear <greearb@candelatech.com> Reported-by:
-
Eric Dumazet authored
[ Upstream commit dc72d99d ] Matt Evans spotted that x86 bpf_jit was incorrectly handling negative constant offsets in BPF_S_LDX_B_MSH instruction. We need to abort JIT compilation like we do in common_load so that filter uses the interpreter code and can call __load_pointer() Reference: http://lists.openwall.net/netdev/2011/07/19/11 Thanks to Indan Zupancic to bring back this issue. Reported-by:
Matt Evans <matt@ozlabs.org> Reported-by:
Indan Zupancic <indan@nul.nu> Signed-off-by:
-
Gao feng authored
[ Upstream commit 1f85851e ] Since commit 299b0767(ipv6: Fix IPsec slowpath fragmentation problem) In func ip6_append_data,after call skb_put(skb, fraglen + dst_exthdrlen) the skb->len contains dst_exthdrlen,and we don't reduce dst_exthdrlen at last This will make fraggap>0 in next "while cycle",and cause the size of skb incorrent Fix this by reserve headroom for dst_exthdrlen. Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Acked-by:
-
Benjamin LaHaise authored
[ Upstream commit bbdb32cb ] While testing L2TP functionality, I came across a bug in getsockname(). The IP address returned within the pppol2tp_addr's addr memember was not being set to the IP address in use. This bug is caused by using inet_sk() on the wrong socket (the L2TP socket rather than the underlying UDP socket), and was likely introduced during the addition of L2TPv3 support. Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Dave Airlie authored
commit 3fa016a0 upstream. Looking at hibernate overwriting I though it looked like a cursor, so I tracked down this missing piece to stop the cursor blink timer. I've no idea if this is sufficient to fix the hibernate problems people are seeing, but please test it. Both radeon and nouveau have done this for a long time. I've run this personally all night hib/resume cycles with no fails. Reviewed-by:
Keith Packard <keithp@keithp.com> Reported-by:
Petr Tesarik <kernel@tesarici.cz> Reported-by:
Stanislaw Gruszka <sgruszka@redhat.com> Reported-by: Lots of misc segfaults after hibernate across the world. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=37142Tested-by:
Dave Airlie <airlied@redhat.com> Tested-by:
Bojan Smojver <bojan@rexursive.com> Tested-by:
Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by:
-
Bing Zhao authored
commit fa0fb93f upstream. For high-speed/super-speed isochronous endpoints, the bInterval value is used as exponent, 2^(bInterval-1). Luckily we have usb_fill_int_urb() function that handles it correctly. So we just call this function to fill in the RX URB. Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by:
-
Sasha Levin authored
commit f946eeb9 upstream. Module size was limited to 64MB, this was legacy limitation due to vmalloc() which was removed a while ago. Limiting module size to 64MB is both pointless and affects real world use cases. Cc: Tim Abbott <tim.abbott@oracle.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Trond Myklebust authored
commit e59d27e0 upstream. Firstly, task->tk_status will always return negative error values, so the current tests for 'NFS4ERR_DELEG_REVOKED' etc. are all being ignored. Secondly, clean up the code so that we only need to test task->tk_status once! Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Trond Myklebust authored
commit 05e9cfb4 upstream. We can currently loop forever in nfs4_lookup_root() and in nfs41_proc_secinfo_no_name(), if the first iteration returns a NFS4ERR_DELAY or something else that causes exception.retry to get set. Reported-by:
Weston Andros Adamson <dros@netapp.com> Signed-off-by:
-
Christoph Lameter authored
commit 66c4c35c upstream. sysfs_slab_add() calls various sysfs functions that actually may end up in userspace doing all sorts of things. Release the slub_lock after adding the kmem_cache structure to the list. At that point the address of the kmem_cache is not known so we are guaranteed exlusive access to the following modifications to the kmem_cache structure. If the sysfs_slab_add fails then reacquire the slub_lock to remove the kmem_cache structure from the list. Reported-by:
Sasha Levin <levinsasha928@gmail.com> Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Jan Kara authored
commit d97d32ed upstream. When an IO error happens during inode deletion run from xlog_recover_process_iunlinks() filesystem gets shutdown. Thus any subsequent attempt to read buffers fails. Code in xlog_recover_process_iunlinks() does not count with the fact that read of a buffer which was read a while ago can really fail which results in the oops on agi = XFS_BUF_TO_AGI(agibp); Fix the problem by cleaning up the buffer handling in xlog_recover_process_iunlinks() as suggested by Dave Chinner. We release buffer lock but keep buffer reference to AG buffer. That is enough for buffer to stay pinned in memory and we don't have to call xfs_read_agi() all the time. Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Masanari Iida authored
commit 8da00edc upstream. Fix typo in drivers/video/backlight/tosa_lcd.c "tosa_lcd_reume" should be "tosa_lcd_resume". Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Joe Thornber authored
commit 6f94a4c4 upstream. Avoid using the bi_next field for the holder of a cell when deferring bios because a stacked device below might change it. Store the holder in a new field in struct cell instead. When a cell is created, the bio that triggered creation (the holder) was added to the same bio list as subsequent bios. In some cases we pass this holder bio directly to devices underneath. If those devices use the bi_next field there will be trouble... This also simplifies some code that had to work out which bio was the holder. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit b0988900 upstream. When we remove an entry from a node we sometimes rebalance with it's two neighbours. This wasn't being done correctly; in some cases entries have to move all the way from the right neighbour to the left neighbour, or vice versa. This patch pretty much re-writes the balancing code to fix it. This code is barely used currently; only when you delete a thin device, and then only if you have hundreds of them in the same pool. Once we have discard support, which removes mappings, this will be used much more heavily. Signed-off-by:
-
Andrei Warkentin authored
commit aadbe266 upstream. Call the correct exit function on failure in dm_exception_store_init. Signed-off-by:
Andrei Warkentin <andrey.warkentin@gmail.com> Acked-by:
-
Mikulas Patocka authored
commit 72c6e7af upstream. Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Reviewed-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit aeb2deae upstream. This patch fixes a possible deadlock in dm-crypt's mempool use. Currently, dm-crypt reserves a mempool of MIN_BIO_PAGES reserved pages. It allocates first MIN_BIO_PAGES with non-failing allocation (the allocation cannot fail and waits until the mempool is refilled). Further pages are allocated with different gfp flags that allow failing. Because allocations may be done in parallel, this code can deadlock. Example: There are two processes, each tries to allocate MIN_BIO_PAGES and the processes run simultaneously. It may end up in a situation where each process allocates (MIN_BIO_PAGES / 2) pages. The mempool is exhausted. Each process waits for more pages to be freed to the mempool, which never happens. To avoid this deadlock scenario, this patch changes the code so that only the first page is allocated with non-failing gfp mask. Allocation of further pages may fail. Signed-off-by:
-
Sekhar Nori authored
commit 81b279d8 upstream. Unbanked GPIO IRQ handling code made a copy of just the irq_chip structure for GPIO IRQ lines which caused problems after the generic IRQ chip conversion because there was no valid irq_chip_type structure with the right "regs" populated. irq_gc_mask_set_bit() was therefore accessing random addresses. Fix it by making a copy of irq_chip_type structure instead. This will ensure sane register offsets. Reported-by:
Jon Povey <Jon.Povey@racelogic.co.uk> Tested-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Sekhar Nori authored
commit ab2dde99 upstream. Unbanked GPIO irq setup code was overwriting chip_data leading to the following oops on request_irq() Unable to handle kernel paging request at virtual address febfffff pgd = c22dc000 [febfffff] *pgd=00000000 Internal error: Oops: 801 [#1] PREEMPT Modules linked in: mcu(+) edmak irqk cmemk CPU: 0 Not tainted (3.0.0-rc7+ #93) PC is at irq_gc_mask_set_bit+0x68/0x7c LR is at vprintk+0x22c/0x484 pc : [<c0080c0c>] lr : [<c00457e0>] psr: 60000093 sp : c33e3ba0 ip : c33e3af0 fp : c33e3bc4 r10: c04555bc r9 : c33d4340 r8 : 60000013 r7 : 0000002d r6 : c04555bc r5 : fec67010 r4 : 00000000 r3 : c04734c8 r2 : fec00000 r1 : ffffffff r0 : 00000026 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 822dc000 DAC: 00000015 Process modprobe (pid: 526, stack limit = 0xc33e2270) Stack: (0xc33e3ba0 to 0xc33e4000) 3ba0: 00000000 c007d3d4 c33e3bcc c04555bc c04555bc c33d4340 c33e3bdc c33e3bc8 3bc0: c007f5f8 c0080bb4 00000000 c04555bc c33e3bf4 c33e3be0 c007f654 c007f5c0 3be0: 00000000 c04555bc c33e3c24 c33e3bf8 c007e6e8 c007f618 c01f2284 c0350af8 3c00: c0405214 bf016c98 00000001 00000000 c33dc008 0000002d c33e3c54 c33e3c28 3c20: c007e888 c007e408 00000001 c23ef880 c33dc000 00000000 c33dc080 c25caa00 3c40: c0487498 bf017078 c33e3c94 c33e3c58 bf016b44 c007e7d4 bf017078 c33dc008 3c60: c25caa08 c33dc008 c33e3c84 bf017484 c25caa00 c25caa00 c01f5f48 c25caa08 3c80: c0496d60 bf017484 c33e3ca4 c33e3c98 c022a698 bf01692c c33e3cd4 c33e3ca8 3ca0: c01f5d88 c022a688 00000000 bf017484 c25caa00 c25caa00 c01f5f48 c25caa08 3cc0: c0496d60 00000000 c33e3cec c33e3cd8 c01f5f8c c01f5d10 00000000 c33e3cf0 3ce0: c33e3d14 c33e3cf0 c01f5210 c01f5f58 c303cb48 c25ecf94 c25caa00 c25caa00 3d00: c25caa34 c33e3dd8 c33e3d34 c33e3d18 c01f6044 c01f51b8 c0496d3c c25caa00 3d20: c044e918 c33e3dd8 c33e3d44 c33e3d38 c01f4ff4 c01f5fcc c33e3d94 c33e3d48 3d40: c01f3d10 c01f4fd8 00000000 c044e918 00000000 00000000 c01f52c0 c034d570 3d60: c33e3d84 c33e3d70 c022bf84 c25caa00 00000000 c044e918 c33e3dd8 c25c2e00 3d80: c0496d60 bf01763c c33e3db4 c33e3d98 c022b1a0 c01f384c c25caa00 c33e3dd8 3da0: 00000000 c33e3dd8 c33e3dd4 c33e3db8 c022b27c c022b0e8 00000000 bf01763c 3dc0: c0451c80 c33e3dd8 c33e3e34 c33e3dd8 bf016f60 c022b210 5f75636d 746e6f63 3de0: 006c6f72 00000000 00000000 00000000 00000000 00000000 00000000 bf0174bc 3e00: 00000000 00989680 00000000 00000020 c0451c80 c0451c80 bf0174dc c01f5eb0 3e20: c33f0f00 bf0174dc c33e3e44 c33e3e38 c01f72f4 bf016e2c c33e3e74 c33e3e48 3e40: c01f5d88 c01f72e4 00000000 c0451c80 c0451cb4 bf0174dc c01f5eb0 c33f0f00 3e60: c0473100 00000000 c33e3e94 c33e3e78 c01f5f44 c01f5d10 00000000 c33e3e98 3e80: bf0174dc c01f5eb0 c33e3ebc c33e3e98 c01f5534 c01f5ec0 c303c038 c3061c30 3ea0: 00003cd8 00098258 bf0174dc c0462ac8 c33e3ecc c33e3ec0 c01f5bec c01f54dc 3ec0: c33e3efc c33e3ed0 c01f4d30 c01f5bdc bf0173a0 c33e2000 00003cd8 00098258 3ee0: bf0174dc c33e2000 c00301a4 bf019000 c33e3f1c c33e3f00 c01f6588 c01f4c8c 3f00: 00003cd8 00098258 00000000 c33e2000 c33e3f2c c33e3f20 c01f777c c01f6524 3f20: c33e3f3c c33e3f30 bf019014 c01f7740 c33e3f7c c33e3f40 c002f3ec bf019010 3f40: 00000000 00003cd8 00098258 bf017518 00000000 00003cd8 00098258 bf017518 3f60: 00000000 c00301a4 c33e2000 00000000 c33e3fa4 c33e3f80 c007b934 c002f3c4 3f80: c00b307c c00b2f48 00003cd8 00000000 00000003 00000080 00000000 c33e3fa8 3fa0: c0030020 c007b8b8 00003cd8 00000000 00098288 00003cd8 00098258 00098240 3fc0: 00003cd8 00000000 00000003 00000080 00098008 00098028 00098288 00000001 3fe0: be892998 be892988 00013d7c 40178740 60000010 00098288 09089041 00200845 Backtrace: [<c0080ba4>] (irq_gc_mask_set_bit+0x0/0x7c) from [<c007f5f8>] (irq_enable+0x48/0x58) r6:c33d4340 r5:c04555bc r4:c04555bc [<c007f5b0>] (irq_enable+0x0/0x58) from [<c007f654>] (irq_startup+0x4c/0x54) r5:c04555bc r4:00000000 [<c007f608>] (irq_startup+0x0/0x54) from [<c007e6e8>] (__setup_irq+0x2f0/0x3cc) r5:c04555bc r4:00000000 [<c007e3f8>] (__setup_irq+0x0/0x3cc) from [<c007e888>] (request_threaded_irq+0xc4/0x110) r8:0000002d r7:c33dc008 r6:00000000 r5:00000001 r4:bf016c98 [<c007e7c4>] (request_threaded_irq+0x0/0x110) from [<bf016b44>] (mcu_spi_probe+0x228/0x37c [mcu]) [<bf01691c>] (mcu_spi_probe+0x0/0x37c [mcu]) from [<c022a698>] (spi_drv_probe+0x20/0x24) [<c022a678>] (spi_drv_probe+0x0/0x24) from [<c01f5d88>] (driver_probe_device+0x88/0x1b0) [<c01f5d00>] (driver_probe_device+0x0/0x1b0) from [<c01f5f8c>] (__device_attach+0x44/0x48) [<c01f5f48>] (__device_attach+0x0/0x48) from [<c01f5210>] (bus_for_each_drv+0x68/0x94) r5:c33e3cf0 r4:00000000 [<c01f51a8>] (bus_for_each_drv+0x0/0x94) from [<c01f6044>] (device_attach+0x88/0xa0) r7:c33e3dd8 r6:c25caa34 r5:c25caa00 r4:c25caa00 [<c01f5fbc>] (device_attach+0x0/0xa0) from [<c01f4ff4>] (bus_probe_device+0x2c/0x4c) r7:c33e3dd8 r6:c044e918 r5:c25caa00 r4:c0496d3c [<c01f4fc8>] (bus_probe_device+0x0/0x4c) from [<c01f3d10>] (device_add+0x4d4/0x648) [<c01f383c>] (device_add+0x0/0x648) from [<c022b1a0>] (spi_add_device+0xc8/0x128) [<c022b0d8>] (spi_add_device+0x0/0x128) from [<c022b27c>] (spi_new_device+0x7c/0xb4) r7:c33e3dd8 r6:00000000 r5:c33e3dd8 r4:c25caa00 [<c022b200>] (spi_new_device+0x0/0xb4) from [<bf016f60>] (mcu_probe+0x144/0x224 [mcu]) r7:c33e3dd8 r6:c0451c80 r5:bf01763c r4:00000000 [<bf016e1c>] (mcu_probe+0x0/0x224 [mcu]) from [<c01f72f4>] (platform_drv_probe+0x20/0x24) [<c01f72d4>] (platform_drv_probe+0x0/0x24) from [<c01f5d88>] (driver_probe_device+0x88/0x1b0) [<c01f5d00>] (driver_probe_device+0x0/0x1b0) from [<c01f5f44>] (__driver_attach+0x94/0x98) [<c01f5eb0>] (__driver_attach+0x0/0x98) from [<c01f5534>] (bus_for_each_dev+0x68/0x94) r7:c01f5eb0 r6:bf0174dc r5:c33e3e98 r4:00000000 [<c01f54cc>] (bus_for_each_dev+0x0/0x94) from [<c01f5bec>] (driver_attach+0x20/0x28) r7:c0462ac8 r6:bf0174dc r5:00098258 r4:00003cd8 [<c01f5bcc>] (driver_attach+0x0/0x28) from [<c01f4d30>] (bus_add_driver+0xb4/0x258) [<c01f4c7c>] (bus_add_driver+0x0/0x258) from [<c01f6588>] (driver_register+0x74/0x158) [<c01f6514>] (driver_register+0x0/0x158) from [<c01f777c>] (platform_driver_register+0x4c/0x60) r7:c33e2000 r6:00000000 r5:00098258 r4:00003cd8 [<c01f7730>] (platform_driver_register+0x0/0x60) from [<bf019014>] (mcu_init+0x14/0x20 [mcu]) [<bf019000>] (mcu_init+0x0/0x20 [mcu]) from [<c002f3ec>] (do_one_initcall+0x38/0x170) [<c002f3b4>] (do_one_initcall+0x0/0x170) from [<c007b934>] (sys_init_module+0x8c/0x1a4) [<c007b8a8>] (sys_init_module+0x0/0x1a4) from [<c0030020>] (ret_fast_syscall+0x0/0x2c) r7:00000080 r6:00000003 r5:00000000 r4:00003cd8 Code: e1844003 e585400c e596300c e5932064 (e7814002) Fix the issue. Reported-by:
-
Tarun Kanti DebBarma authored
commit 8276536c upstream. This function should be capable of both enabling and disabling interrupts based upon the *enable* parameter. Right now the function only enables the interrupt and *enable* is not used at all. So add the interrupt disable capability also using the parameter. Signed-off-by:
Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by:
Felipe Balbi <balbi@ti.com> Reviewed-by:
Kevin Hilman <khilman@ti.com> Signed-off-by:
-
Jan Kara authored
commit a0391a3a upstream. udf_release_file() can be called from munmap() path with mmap_sem held. Thus we cannot take i_mutex there because that ranks above mmap_sem. Luckily, i_mutex is not needed in udf_release_file() anymore since protection by i_data_sem is enough to protect from races with write and truncate. Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by:
Namjae Jeon <linkinjeon@gmail.com> Signed-off-by:
-
