Need to use vddc0 for vdcc1 for certain hawaii configurations.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Only enable it for levels 0 and 1.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Only need to be enabled on the first level.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Properly take into account the post divider.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Certain memory configurations need a fix.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the preferred SMC commands for forcing state on CI.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Workaround for memory link training on certain variants
of 0x6649.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Certain feature enablement depends on entries in the atom
gpio pin table.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We need this in the dpm code.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We need it for dpm.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Need to disable DS, not enable it when disabling dpm.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

In preparation for fan control.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In preparation for fan control.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Required for fan control support.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DRM_MM_SEARCH_BEST gets the smallest hole which can fit the BO. That seems
against the idea of TTM_PL_FLAG_TOPDOWN:

* The smallest hole may be in the overall bottom of the area
* If the hole isn't much larger than the BO, it doesn't make much
  difference whether the BO is placed at the bottom or at the top of the
  hole
Reviewed-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If the BO should be placed at the top of the area, we should start looking
for holes from the top.
Reviewed-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

I wasn't sure if TTM_PL_FLAG_TOPDOWN works correctly with non-0 lpfn, but
AFAICT it does.
Reviewed-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This avoids them getting in the way of BOs which might be accessed by
the CPU. They can still go to the CPU accessible part of VRAM though if
there's no space outside of it.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Motivated by the per-plane locking I've gone through all the get*
ioctls and reduced the locking to the bare minimum required.

v2: Rebase and make it compile ...

v3: Review from Sean:
- Simplify return handling in getplane_res.
- Add a comment to getplane_res that the plane list is invariant and
  can be walked locklessly.

v4: Actually git add.

Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Turned out to be much simpler on top of my latest atomic stuff than
what I've feared. Some details:

- Drop the modeset_lock_all snakeoil in drm_plane_init. Same
  justification as for the equivalent change in drm_crtc_init done in

	commit d0fa1af4
	Author: Daniel Vetter <daniel.vetter@ffwll.ch>
	Date:   Mon Sep 8 09:02:49 2014 +0200

	    drm: Drop modeset locking from crtc init function

  Without these the drm_modeset_lock_init would fall over the exact
  same way.

- Since the atomic core code wraps the locking switching it to
  per-plane locks was a one-line change.

- For the legacy ioctls add a plane argument to the locking helper so
  that we can grab the right plane lock (cursor or primary). Since the
  universal cursor plane might not be there, or someone really crazy
  might forgoe the primary plane even accept NULL.

- Add some locking WARN_ON to the atomic helpers for good paranoid
  measure and to check that it all works out.

Tested on my exynos atomic hackfest with full lockdep checks and ww
backoff injection.

v2: I've forgotten about the load-detect code in i915.

v3: Thierry reported that in latest 3.18-rc vmwgfx doesn't compile any
more due to

commit 21e88620
Author: Rob Clark <robdclark@gmail.com>
Date:   Thu Oct 30 13:39:04 2014 -0400

    drm/vmwgfx: fix lock breakage

Rebased and fix this up.

Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

v1: original
v2: danvet's kerneldoc nitpicks
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

backmerge to get vmwgfx locking changes into next as the
conflict with per-plane locking.

These two didn't get documented properly, do so.

Pointed out by Daniel.

v1.1: add missing boilerplate (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'topic/atomic-helpers-2014-11-09' of git://anongit.freedesktop.org/drm-intel into drm-next

So here's my atomic series, finally all debugged&reviewed. Sean Paul has
done a full detailed pass over it all, and a lot of other people have
commented and provided feedback on some parts. Rob Clark also converted
msm over the w/e and seems happy. The only small thing is that Rob wants
to export the wait_for_vblank, which imo makes sense. Since there's other
stuff still to do I think we should apply Rob's patch (once it has grown
appropriate kerneldoc) later on top of this.

This is just the core<->driver interface plus a big pile of helpers. Short
recap of the main ideas:

- There are essentially three helper libraries in this patch set:

  * Transitional helpers to use the new plane callbacks for legacy plane
    updates and in the crtc helper's ->mode_set callback. These helpers are
    only temporarily used to convert drivers to atomic, but they allow a
    nice separation between changing the driver backend and switching to
    the atomic commit logic.

  * Legacy helpers to implement all the legacy driver entry points
    (page_flip, set_config, plane vfuncs) on top of the new atomic driver
    interface. These are completely driver agnostic. The reason for having
    the legacy support as helpers is that drivers can switch step-by-step.
    And they could e.g. even keep the legacy page_flip code around for some
    old platforms where converting to full-blown atomic isn't worth it.

  * Atomic helpers which implement the various new ->atomic_* driver
    interfaces in terms of the revised crtc helper and new plane helper
    hooks.

- The revised crtc helper implemenation essentially implements all the
  lessons learned in the i915 modeset rework (when using the atomic helpers
  only):

  * Enable/disable sequence for a given config are always the same and
    callbacks are always called in the same order. This contrast starkly
    with the crtc helpers, where the sequence of operations is heavily
    dependent on the previous config.

    One corollary of this is that if the configuration of a crtc only
    partially changes (e.g. a connector moves in a cloned config) the
    helper code will still disable/enable the full display pipeline. This
    is the only way to ensure that the enable/disable sequence is always
    the same.

  * It won't call disable or enable hooks more than once any more because
    it lost track of state, thanks to the atomic state tracking. And if
    drivers implement the ->reset hook properly (by either resetting the hw
    or reading out the hw state into the atomic structures) this even
    extends to the hardware state. So no more disable-me-harder kind of
    nonsense.

  * The only thing missing is the hw state readout/cross-check support, but
    if drivers have hw state readout support in their ->reset handlers it's
    simple to extend that to cross-check the hw state.

  * The crtc->mode_set callback is gone and its replacement only sets crtc
    timings and no longer updates the primary plane state. This way we can
    finally implement primary planes properly.

- The new plane helpers should be suitable enough for pretty much
  everything, and a perfect fit for hardware with GO bits. Even if they
  don't fit the atomic helper library is rather flexible and exports all
  the functions for the individual steps to drivers. So drivers can pick
  what matches and implement their own magic for everything else.

- A big difference compared to all previous atomic series is that this one
  doesn't implement async commit in a generic way. Imo driver requirements
  for that are too diverse to create anything reasonable sane which would
  actually work on a reasonable amount of different drivers. Also, we've
  never had a helper library for page_flips even, so it's really hard to
  know what might work and what's stupid without a bit of experience in the form
  of a few driver implementations.

  I think with the current flexibility for drivers to pick individual
  stages and existing helpers like drm_flip_queue it's rather easy though
  to implement proper async commit.

- There's a few other differences of minor importance to earlier atomic
  series:

  * Common/generic properties are parsed in the callers/core and not in
    drivers, and passed to drivers by directly setting the right members in
    atomic state structures. That greatly simplifies all the transitional
    and legacy helpers an removes a lot of boilerplate code.

  * There's no crazy trylock mode used for the async commit since these
    helpers don't do async commit. A simple ordered flip queue of atomic
    state updates should be sufficient for preventing concurrent hw access
    anyway, as long as synchronous updates stall correctly with e.g.
    flush_work_queue or similar function. Abusing locks to enforce ordering
    isn't a good idea imo anyway.

  * These helpers reuse the existing ->mode_fixup hooks in the atomic_check
    callback. Which means that drivers need to adapat and move a lot less code
    into their atomic_check callbacks.

Now this isn't everything needed in the drm core and helpers for full
atomic support. But it's enough to start with converting drivers, and
except for actually testing multiplane and multicrtc updates also enough to
implement full atomic updates. Still missing are:

- Per-plane locking. Since these helpers here encapsulate the locking
  completely this should be fairly easy to implement.

- fbdev support for atomic_check/commit, so that multi-pipe finally works
  sanely in fbcon.

- Adding and decoding shared/core properties. That just needs to be rebased
  from Rob's latest patch series, with minor adjustments so that the
  decoding happens in the core instead of in drivers.

- Actually adding the atomic ioctl. Again just rebasing Rob's latest patch
  should be all that's needed.

- Resolving how to deal with DPMS in atomic. Atomic is a good excuse to fix up
  the crazy semantics dpms currently has. I'm floating an RFC about this topic
  already.

- Finally I couldn't test connector/encoder stealing properly since my test
  vehicle here doesn't allow a connector on different crtcs. So drivers
  which support this might see some surprises in that area. There is no semantic
  change though in how encoder stealing and assignment works (or at least no
  intended one), so I think the risk is minimal.

As just mentioned I've done a fake conversion of an existing driver using
crtc helpers to debug the helper code and validate the smooth transition
approach. And that smooth transition was the really big motivation for
this. It seems to actually work and consists of 3 phases:

Phase 1: Rework driver backend for crtc/plane helpers

The requirement here is that universal plane support is already implement. If
universal plane support isn't implement yet it might be better though to just do
it as part of this phase, directly using the new plane helpers. There are two
big things to do:

- Split up the existing ->update/disable_plane hooks into check/commit
  hooks and extract the crtc-wide prep/flush parts (like setting/clearing
  GO bits).

- The other big change is to split the crtc->mode_set hook into the plane
  update (done using the plane helpers) and the crtc setup in a new
  ->mode_set_nofb hook.

When phase 1 is complete the driver implements all the new callbacks which
push the software state into hardware, but still using all the legacy entry
points and crtc helpers. The transitional helpers serve as impendance
mismatch here.

Phase 2: Rework state handling

This consists of rolling out the state handling helpers for planes, crtcs
and connectors and reviewing all ->mode_fixup and similar hooks to make
sure they don't depend upon implicit global state which might change in the
atomic world. Any such code must be moved into ->atomic_check functions which
just rely on the free-standing atomic state update structures.

This phase also adds a few small pieces of fixup code to make sure the
atomic state doesn't get out of sync in the legacy driver callbacks.

Phase 3: Roll out atomic support

Now it's just about replacing vfuncs with the ones provided by the helper
and filling out the small missing pieces (like atomic_check logic or async
commit support needed for page_flips). Due to the prep work in phase 1 no
changes to the driver backend functions should be required, and because of
the prep work in phase 2 atomic implementations can be rolled out
step-by-step. So if async commit ins't implemented yet page_flip can be
implemented with the legacy functions without wreaking havoc in the other
operations.

* tag 'topic/atomic-helpers-2014-11-09' of git://anongit.freedesktop.org/drm-intel:
  drm/atomic: Refcounting for plane_state->fb
  drm: Docbook integration and over sections for all the new helpers
  drm/atomic-helpers: functions for state duplicate/destroy/reset
  drm/atomic-helper: implement ->page_flip
  drm/atomic-helpers: document how to implement async commit
  drm/atomic: Integrate fence support
  drm/atomic-helper: implementatations for legacy interfaces
  drm: Atomic crtc/connector updates using crtc/plane helper interfaces
  drm/crtc-helper: Transitional functions using atomic plane helpers
  drm/plane-helper: transitional atomic plane helpers
  drm: Add atomic/plane helpers
  drm: Global atomic state handling
  drm: Add atomic driver interface definitions for objects
  drm/modeset_lock: document trylock_only in kerneldoc
  drm: fixup kerneldoc in drm_crtc.h
  drm: Pull drm_crtc.h into the kerneldoc template
  drm: Move drm_crtc_init from drm_crtc.h to drm_plane_helper.h

Pull arm64 fixes from Catalin Marinas:
 - enable bpf syscall for compat
 - cpu_suspend fix when checking the idle state type
 - defconfig update

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: defconfig: update defconfig for 3.18
  arm64: compat: Enable bpf syscall
  arm64: psci: fix cpu_suspend to check idle state type for index

Pull ARM SoC fixes from Olof Johansson:
 "Another quiet week:

   - a fix to silence edma probe error on non-supported platforms from
     Arnd
   - a fix to enable the PL clock for Parallella, to make mainline
     usable with the SDK.
   - a somewhat verbose fix for the PLL clock tree on VF610
   - enabling of SD/MMC on one of the VF610-based boards (for testing)
   - a fix for i.MX where CONFIG_SPI used to be implicitly enabled and
     now needs to be added to the defconfig instead
   - another maintainer added for bcm2835: Lee Jones"

* tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: zynq: Enable PL clocks for Parallella
  dma: edma: move device registration to platform code
  ARM: dts: vf610: add SD node to cosmic dts
  MAINTAINERS: update bcm2835 entry
  ARM: imx: Fix the removal of CONFIG_SPI option
  ARM: imx: clk-vf610: define PLL's clock tree

Pull devicetree bugfix from Grant Likely:
 "One buffer overflow bug that shouldn't be left around"

* 'devicetree/merge' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
  of: Fix overflow bug in string property parsing functions

Pull btrfs fix from Chris Mason:
 "It's a one liner for an error cleanup path that leads to crashes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup

Merge tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are 3 tiny fixes for 3.18-rc4.

  One fixes up a long-stading race condition in the driver core for
  removing directories in /sys/devices/virtual/ and the other 2 fix up
  the wording of a new Kconfig option that was added in 3.18-rc1"

* tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
  tiny: reverse logic for DISABLE_DEV_COREDUMP
  sysfs: driver core: Fix glue dir race condition by gdp_mutex

Pull staging driver fixes from Greg KH:
 "Here are some staging/iio fixes for 3.18-rc4.

  Nothing major, just a few bugfixes of things that have been reported"

* tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging:iio:ade7758: Remove "raw" from channel name
  staging:iio:ade7758: Fix check if channels are enabled in prenable
  staging:iio:ade7758: Fix NULL pointer deref when enabling buffer
  iio: as3935: allocate correct iio_device size
  io: accel: kxcjk-1013: Fix iio_event_spec direction
  iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined
  iio: adc: mxs-lradc: Disable the clock on probe failure
  iio: st_sensors: Fix buffer copy
  staging:iio:ad5933: Drop "raw" from channel names
  staging:iio:ad5933: Fix NULL pointer deref when enabling buffer

Pull tty/serial fixes from Greg KH:
 "Here are some tiny serial/tty fixes for 3.18-rc4 that resolve some
  reported issues"

* tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Fix pty master poll() after slave closes v2
  serial: of-serial: fix uninitialized kmalloc variable
  tty/vt: don't set font mappings on vc not supporting this
  tty: serial: 8250_mtk: Fix quot calculation
  tty: Prevent "read/write wait queue active!" log flooding
  tty: Fix high cpu load if tty is unreleaseable
  serial: Fix divide-by-zero fault in uart_get_divisor()

Pull USB fixes from Greg KH:
 "Here are some USB fixes for 3.18-rc4.

  Just a bunch of little fixes resolving reported issues and new device
  ids for existing drivers.  Full details are in the shortlog"

* tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: Update default usb-storage delay_use value in kernel-parameters.txt
  USB: cdc-acm: add quirk for control-line state requests
  phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly
  USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init()
  USB: cdc-acm: only raise DTR on transitions from B0
  Revert "storage: Replace magic number with define in usb_stor_euscsi_init()"
  usb: core: notify disconnection when core detects disconnect
  usb: core: need to call usb_phy_notify_connect after device setup
  uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models
  xhci: no switching back on non-ULT Haswell
  USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen
  USB: quirks: enable device-qualifier quirk for another Elan touchscreen
  MAINTAINERS: Remove duplicate entry for usbip driver
  usb: storage: fix build warnings !CONFIG_PM
  usb: Remove references to non-existent PLAT_S5P symbol
  uas: Add NO_ATA_1X for VIA VL711 devices
  xhci: Disable streams on Asmedia 1042 xhci controllers
  USB: HWA: fix a warning message
  uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model
  usb-storage: handle a skipped data phase
  ...

The Parallella board comes with a U-Boot bootloader that loads one of
two predefined FPGA bitstreams before booting the kernel. Both define an
AXI interface to the on-board Epiphany processor.

Enable clocks FCLK0..FCLK3 for the Programmable Logic by default.

Otherwise accessing, e.g., the ESYSRESET register freezes the board,
as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem.

Cc: <stable@vger.kernel.org> # 3.17.x
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull i2c bugfixes from Wolfram Sang:
 "One bigger cleanup (FSF address removal) and two bugfixes for I2C"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: Dispose OF IRQ mapping at client removal time
  i2c: at91: don't account as iowait
  i2c: remove FSF address

Pull irq fixes from Thomas Gleixner:
 "Two fixlets for the armada SoC interrupt controller"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: armada-370-xp: Fix MPIC interrupt handling
  irqchip: armada-370-xp: Fix MSI interrupt handling

Pull media fixes from Mauro Carvalho Chehab:
 "For:
   - some regression fixes at the Remote Controller core and imon driver
   - a build fix for certain randconfigs with ir-hix5hd2
   - don't feed power to satellite system at ds3000 driver init

  It also contains some fixes for drivers added for Kernel 3.18:
   - some fixes at the new ISDB-S driver, and the corresponding bits to
     fix some descriptors for this Japanese TV standard at the DVB core
   - two warning cleanups for sp2 driver if PM is disabled
   - change the default mode for the new vivid driver"

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] sp2: sp2_init() can be static
  [media] dvb:tc90522: fix always-false expression
  [media] dvb-core: set default properties of ISDB-S
  [media] dvb:tc90522: fix stats report
  [media] vivid: default to single planar device instances
  [media] imon: fix other RC type protocol support
  [media] ir-hix5hd2 fix build warning
  [media] ds3000: fix LNB supply voltage on Tevii S480 on initialization
  [media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding
  [media] rc-core: fix protocol_change regression in ir_raw_event_register

Pull MIPS updates from Ralf Baechle:
 "This weeks' round of MIPS bug fixes for 3.18:

   - wire up the bpf syscall
   - fix TLB dump output for R3000 class TLBs
   - fix strnlen_user return value if no NUL character was found.
   - fix build with binutils 2.24.51+.  While there is no binutils 2.25
     release yet, toolchains derived from binutils 2.24.51+ are already
     in common use.
   - the Octeon GPIO code forgot to offline GPIO IRQs.
   - fix build error for XLP.
   - fix possible BUG assertion with EVA for CMA"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix build with binutils 2.24.51+
  MIPS: R3000: Fix debug output for Virtual page number
  MIPS: Fix strnlen_user() return value in case of overlong strings.
  MIPS: CMA: Do not reserve memory if not required
  MIPS: Wire up bpf syscall.
  MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
  MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-aware

Pull xfs fixes from Dave Chinner:
 "This update fixes a warning in the new pagecache_isize_extended() and
  updates some related comments, another fix for zero-range
  misbehaviour, and an unforntuately large set of fixes for regressions
  in the bulkstat code.

  The bulkstat fixes are large but necessary.  I wouldn't normally push
  such a rework for a -rcX update, but right now xfsdump can silently
  create incomplete dumps on 3.17 and it's possible that even xfsrestore
  won't notice that the dumps were incomplete.  Hence we need to get
  this update into 3.17-stable kernels ASAP.

  In more detail, the refactoring work I committed in 3.17 has exposed a
  major hole in our QA coverage.  With both xfsdump (the major user of
  bulkstat) and xfsrestore silently ignoring missing files in the
  dump/restore process, incomplete dumps were going unnoticed if they
  were being triggered.  Many of the dump/restore filesets were so small
  that they didn't evenhave a chance of triggering the loop iteration
  bugs we introduced in 3.17, so we didn't exercise the code
  sufficiently, either.

  We have already taken steps to improve QA coverage in xfstests to
  avoid this happening again, and I've done a lot of manual verification
  of dump/restore on very large data sets (tens of millions of inodes)
  of the past week to verify this patch set results in bulkstat behaving
  the same way as it does on 3.16.

  Unfortunately, the fixes are not exactly simple - in tracking down the
  problem historic API warts were discovered (e.g xfsdump has been
  working around a 20 year old bug in the bulkstat API for the past 10
  years) and so that complicated the process of diagnosing and fixing
  the problems.  i.e. we had to fix bugs in the code as well as
  discover and re-introduce the userspace visible API bugs that we
  unwittingly "fixed" in 3.17 that xfsdump relied on to work correctly.

  Summary:

   - incorrect warnings about i_mutex locking in pagecache_isize_extended()
     and updates comments to match expected locking
   - another zero-range bug fix for stray file size updates
   - a bunch of fixes for regression in the bulkstat code introduced in
     3.17"

* tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: track bulkstat progress by agino
  xfs: bulkstat error handling is broken
  xfs: bulkstat main loop logic is a mess
  xfs: bulkstat chunk-formatter has issues
  xfs: bulkstat chunk formatting cursor is broken
  xfs: bulkstat btree walk doesn't terminate
  mm: Fix comment before truncate_setsize()
  xfs: rework zero range to prevent invalid i_size updates
  mm: Remove false WARN_ON from pagecache_isize_extended()
  xfs: Check error during inode btree iteration in xfs_bulkstat()
  xfs: bulkstat doesn't release AGI buffer on error