This restored previous behaviour. If caller does not want ports to be
filled, we should not break.

Fixes: 06635a35 ("flow_dissect: use programable dissector in skb_flow_dissect and friends")
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jamal points out that this header also contains kernel internal magic that
cannot be used from userspace for anything meaningful.

Lets remove what the kernel doesn't use anymore and wrap remainder with
__KERNEL__.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch tracks the total number of inbound and outbound segments on a
TCP socket. One may use this number to have an idea on connection
quality when compared against the retransmissions.

RFC4898 named these : tcpEStatsPerfSegsIn and tcpEStatsPerfSegsOut

These are a 32bit field each and can be fetched both from TCP_INFO
getsockopt() if one has a handle on a TCP socket, or from inet_diag
netlink facility (iproute2/ss patch will follow)

Note that tp->segs_out was placed near tp->snd_nxt for good data
locality and minimal performance impact, while tp->segs_in was placed
near tp->bytes_received for the same reason.

Join work with Eric Dumazet.

Note that received SYN are accounted on the listener, but sent SYNACK
are not accounted.
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip -6 addr add dead::1/128 dev eth0
sleep 5
ip -6 route add default via dead::1/128
-> fails
ip -6 addr add dead::1/128 dev eth0
ip -6 route add default via dead::1/128
-> succeeds

reason is that if (nonsensensical) route above is added,
dead::1 is still subject to DAD, so the route lookup will
pick eth0 as outdev due to the prefix route that is added before
DAD work is started.

Add explicit test that checks if nexthop gateway is a local address.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1167969Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Joachim Eastwood says:

====================
stmmac: probe code refactoring and clean up part 1

This patch set refactor the code in stmmac_pci_probe and stmmac_pltfr_probe
and moves the common bits into stmmac_dvr_probe. Along the way some clean-
ups are applied to stmmac_pltfr_probe.

The code has been tested on the LPC18xx platform.

I am still working on more refactoring of the platform probe code, hence
part 1, but I need some more time on this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the caller already check the presence of a of_node there
is no need to repeat the check in stmmac_probe_config_dt.

There is also no point in checking the return value of the
of_match_device function since if there wasn't match in the
first place we would never be in this function.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since stmmac_dvr_probe takes care of setting driver data and
assign resources to the priv structure there is no need to
access the priv structure from the other probe functions.
This mean that this function can be changed into just return
an int and thus simplifying the callers.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Creat a struct that contain all the resources that needs to be
assigned to the priv struct in stmmac_dvr_probe. This makes it
possible to factor out more common code from the other probe
functions and also use this struct to hold the resources as
they are fetched.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move setting of driver data into stmmac_dvr_probe so the
other probe functions don't have to. This will help to
simplify the other probe functions later.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: improve source port selection

With increase of TCP sockets in hosts, we often hit limitations
caused by port selection, due to randomization and poor strategy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

inet_csk_get_port() randomization effort tends to spread
sockets on all the available range (ip_local_port_range)

This is unfortunate because SO_REUSEADDR sockets have
less requirements than non SO_REUSEADDR ones.

If an application uses SO_REUSEADDR hint, it is to try to
allow source ports being shared.

So instead of picking a random port number in ip_local_port_range,
lets try first in first half of the range.

This gives more chances to use upper half of the range for the
sockets with strong requirements (not using SO_REUSEADDR)

Note this patch does not add a new sysctl, and only changes
the way we try to pick port number.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
Cc: Flavio Leitner <fbl@redhat.com>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We no longer need bsocket atomic counter, as inet_csk_get_port()
calls bind_conflict() regardless of its value, after commit
2b05ad33 ("tcp: bind() fix autoselection to share ports")

This patch removes overhead of maintaining this counter and
double inet_csk_get_port() calls under pressure.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
Cc: Flavio Leitner <fbl@redhat.com>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently rely on the setting of SOCK_NOSPACE in the write()
path to ensure that we wake up any epoll edge trigger waiters when
acks return to free space in the write queue. However, if we fail
to allocate even a single skb in the write queue, we could end up
waiting indefinitely.

Fix this by explicitly issuing a wakeup when we detect the condition
of an empty write queue and a return value of -EAGAIN. This allows
userspace to re-try as we expect this to be a temporary failure.

I've tested this approach by artificially making
sk_stream_alloc_skb() return NULL periodically. In that case,
epoll edge trigger waiters will hang indefinitely in epoll_wait()
without this patch.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
cxgb4: Cleanup and update T4/T4 register ranges

This series cleans and optimizes setup_memwin function and also updates
T4/T5 adapter register ranges by removing incorrect register addresses

This patch series has been created against net-next tree and includes
patches on cxgb4 driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove some T4/T5 registers that were included incorrectly.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shradha Shah says:

====================
sfc: Get/Set MAC address and ndo_[set/get]_vf_* entrypoint functions

This is the second installment of patches towards supporting EF10 SRIOV.

This patch series implements the ndo_get_vf_config, ndo_set_vf_mac,
ndo_set_vf_vlan and ndo_set_vf_spoofcheck function callbacks for EF10.

This patch series also introduces privileges for the MCDI commands
based on which functions are allowed to call them, i.e. Link control
or primary function.

The patch series has been tested with and without CONFIG_SFC_SRIOV.

The ndo function callbacks are tested using ip link.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a set_mac_address() NIC-type function for EF10 only, and
use this to set the MAC address on the vadaptor. For Siena and
earlier, the MAC address continues to be set by MC_CMD_SET_MAC;
this is still called on EF10, and including a MAC address in
this command has no effect.

The sriov_mac_address_changed() NIC-type function is no longer
needed on EF10, but it is needed for Siena where it is used to
update the peer address of the PF for VFDI.  Change this to use
the new set_mac_address function pointer.

efx_ef10_sriov_mac_address_changed() is no longer called, as VFs
will try to change the MAC address on their vadaptor rather than
trying to change to the context of the PF to alter the vport.

When a VF is running in direct passthrough mode with MAC spoofing
enabled, it will be able to change the MAC address on its vadaptor.
In this case, there is a link to the PF, so find the correct VF in
its ef10_vf array and update the MAC address.

ndo_set_mac_address() can be called during driver unload while
bonding, and in this case the device has already been stopped, so
don't call efx_net_open() to restart it after reconfiguration.

efx->port_enabled is set to false in efx_stop_port(), so it is
indicator of whether the device needs to be restarted.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Exercised with
"ip link set <PF intf> vf <vf_i> state {auto|enable|disable}"
Sets the reporting policy for VF link state to either
 - mirror physical link state
 - always up
 - always down

get VF link state mode in efx_ef10_sriov_get_vf_config

Exercised by
"ip link show <PF intf>";
output will include a line like
vf 0 MAC 12:34:56:78:9a:bc, link-state auto
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The max vlan tags that can be offloaded is 2, including any upstream VLAN
aggregator. Currently there is no way for the net driver to know whether
the upstream vswitch (if any) is using vlan tags, so there is no way to
know how many tags we can request.
Along with the implementation for the ndo_set_vf_vlan callback, this patch
also adds 2 VLAN tags for the driver created VEB switch if possible, that
way it is possible to offload as many tags as are allowed.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we do an entity reset when we detect an MC reboot.
This messes up SRIOV because it leaves VFs orphaned. The extra
reset is rather redundant anyway, since the MC reboot will have
basically reset everything.

This change replaces the entity reset after MC reboot with a
simpler datapath reset that reallocates resources but doesn't
perform the entity reset.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnetlink calls ndo_get_vf_config when compiling information
about a network interface, so that the VFs associated with a PF
can be listed (eg: ip link show).
Implement a response to this entry point and return PF-set MAC
address for VF in ndo_get_vf_config
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement a response to this entrypoint.
The ndo_set_vf_mac() entrypoint is only exposed in the driver if
CONFIG_SFC_SRIOV is defined.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to avoid MC bugs the flags field needs to be set to 0.
Instead of explicitly clearing out the flags individually, a
better way to do this is to memset the MCDI_BUF to 0.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A VF's MAC address is set by its parent PF and added to its vport.
To get this MAC address, the VF must use MC_CMD_ VPORT_GET_MAC_ADDRESSES.
In the current scheme, a VF's vport should only have one MAC address,
so warn if this is not the case.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If MCDI timeouts are encountered during efx_ef10_filter_table_remove(),
an FLR will be queued, but efx->filter_state will still be kfree()d.
The queued FLR will then call efx_ef10_filter_table_restore(), which
will try to use efx->filter_state. This previously caused a panic.
This patch adds an rwsem to protect the existence of efx->filter_state,
separately from the spinlock protecting its contents.  Users which can
race against efx_ef10_filter_table_remove() should down_read this rwsem.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initialised in efx_probe_vf and removal is dealt with in
efx_ef10_remove.

vf->efx is needed in future patches to change the MAC address
of the VF via the parent PF, while the driver is bound to the
VF.
Example: ip link set dev vf NUM mac LLADDR
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Otherwise the PF and VF can disagree on the VF's MAC address and
this leads to strange behaviour, up to and including kernel panics.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added function efx_ef10_get_vf_index to store the vf_index
in nic_data during probe

vf_index is needed in future patches to access a particular
VF in the VF data structure.

Moved efx_ef10_probe_pf and efx_ef10_probe_vf in order to
used efx_ef10_remove
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MC_CMD_SET_MAC is privileged and can only by called by the link
control function.

This patch adds efx_ef10_mac_reconfigure_vf which avoids the call
to MC_CMD_SET_MAC by the Virtual function
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is one primary function per adaptor, one link control function
per port and the rest as categorised as general.

This patch adds privileges to the MCDI commands based on which
functions are allowed to call them.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This also matches with the sibling call netdev_alloc_skb_ip_align() made in
rx fast path.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

30 usecs (or really, 1 jiffy) can go by pretty fast.

Move the set of the timeout immediately before the loop.

Remove the unnecessary max(1ul, usecs_to_jiffies(30)) as
usecs_to_jiffies with a non-zero constant is guaranteed
to be non-zero.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
rocker: transaction fixes

this series addresses what appear to be errors in the handling of
prepare and then commit transactions in the rocker driver.

In all cases the problem is that data structures visible outside of
the transaction are modified during the prepare phase.

In the case of the first two patches this results in the kernel reporting a
BUG. I have noted test-cases in the change logs.

The third patch is also a bug fix, as noted by  Toshiaki Makita,
however I have not been able to reliably reproduce the problem and
thus have not provided a test case.

The last patch is a correctness fix that does not fix a bug
that manifests as far as I can tell.

Changes: v3->v4
* All patches
  - Add Jiri Pirko's ack
* "rocker: do not make neighbour entry changes when preparing transactions"
  - Setting of entry values in all transaction phases
    as suggested by Toshiaki Makita
* "rocker: make rocker_port_internal_vlan_id_{get,put}() non-transactional"
  - Remove Fixes tag as I believe this is a correctness rather than a bug fix

Changes: v2->v3
* "rocker: do not make neighbour entry changes when preparing transactions"
  - Correct inverted logic
  - Added ack from Scott Feldman

Changes: v1->v2
* "rocker: do not make neighbour entry changes when preparing transactions"
  - Revised changelog to reflect information from Toshiaki Makita
    that there is a bug that can manifest
  - Update address and ttl regardless of the value of the transaction state
* All other patches
  - Added acks from Scott Feldman
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The motivation for this is that rocker_port_internal_vlan_id_{get,put} appear
to only partially implement the transaction model: memory allocation
and freeing is transactional, but hash and bitmap manipulation is not.

The latter could be fixed, however, as it is not currently exercised
due to trans always being SWITCHDEV_TRANS_NONE it seems cleaner
to make rocker_port_internal_vlan_id_get non-transactional.

This problem was introduced by c4f20321 ("rocker: support
prepare-commit transaction model").

Found by inspection.
I do not believe that this change should have any run-time effect.
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rocker_port_ipv4_nh() and in turn rocker_port_ipv4_neigh() may be
be called with trans == SWITCHDEV_TRANS_PREPARE and then
trans == SWITCHDEV_TRANS_COMMIT from switchdev_port_obj_set() via
fib_table_insert().

The first time that rocker_port_ipv4_nh() is called, with
trans == SWITCHDEV_TRANS_PREPARE, _rocker_neigh_add() adds a new entry to
the neigh table.

And the second time  rocker_port_ipv4_nh() is called, with
trans == SWITCHDEV_TRANS_COMMIT, that entry is found. This causes
rocker_port_ipv4_nh() to believe it is not adding an entry and thus it
frees "entry", which is still present in rocker driver's neigh table.

This problem does not appear to affect deletion as my analysis is that
deletion is always performed with trans == SWITCHDEV_TRANS_NONE.

For completeness _rocker_neigh_{add,del,prepare} are updated not to
manipulate fib table entries if trans == SWITCHDEV_TRANS_PREPARE.

Fixes: c4f20321 ("rocker: support prepare-commit transaction model")
Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rocker_port_fdb_flush() may be called be called with
trans == SWITCHDEV_TRANS_PREPARE and then trans == SWITCHDEV_TRANS_COMMIT from
switchdev_port_attr_set() via switchdev_port_obj_add().

Adding the new entry to the FDB table when trans == SWITCHDEV_TRANS_PREPARE
may result in a memory leak because when trans == SWITCHDEV_TRANS_PREPARE
rocker_flow_tbl_bridge() will allocate memory when called via
rocker_port_fdb_learn(). However, when trans == SWITCHDEV_TRANS_COMMIT
the presence of the FDB entry in the FDB table causes
rocker_port_fdb() to set the ROCKER_OP_FLAG_REFRESH flag which results
in rocker_port_fdb_learn() skipping the call to rocker_flow_tbl_bridge()
which would free the memory allocated by it when
trans == SWITCHDEV_TRANS_PREPARE.

ip link add br0 type bridge
ip link set up dev eth0
ip link set dev eth0 master br0
bridge fdb add 52:54:00:12:35:08 dev eth0
bridge fdb add 52:54:00:12:35:09 dev eth0
[    2.600730] ------------[ cut here ]------------
[    2.601002] kernel BUG at drivers/net/ethernet/rocker/rocker.c:4369!
[    2.601373] invalid opcode: 0000 [#1] SMP
[    2.601963] Modules linked in:
[    2.602355] CPU: 0 PID: 64 Comm: bridge Not tainted 4.1.0-rc3-01048-g6d0f50c50211-dirty #1075
[    2.602721] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.0-0-g4c59f5d-20150219_092859-nilsson.home.kraxel.org 04/01/2014
[    2.602721] task: ffff880019facef0 ti: ffff88001f96c000 task.ti: ffff88001f96c000
[    2.602721] RIP: 0010:[<ffffffff811f1470>]  [<ffffffff811f1470>] rocker_port_obj_add+0x150/0x160
[    2.602721] RSP: 0018:ffff88001f96fa98  EFLAGS: 00000212
[    2.602721] RAX: ffff880019d4fa68 RBX: ffff88001f96fb18 RCX: 0000000000000000
[    2.602721] RDX: ffff880019d4f000 RSI: ffff88001f96fb18 RDI: ffff880019d4f000
[    2.602721] RBP: 0000000000000001 R08: 0000000000000000 R09: ffff88001f904620
[    2.602721] R10: ffff88001f96fb60 R11: ffff880019e9d100 R12: ffff88001f96fb18
[    2.602721] R13: ffff880019d4f680 R14: ffff88001f904610 R15: ffff8800198f7b80
[    2.602721] FS:  00007f3eee917700(0000) GS:ffff88001b000000(0000) knlGS:0000000000000000
[    2.602721] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.602721] CR2: 00007f3eee4a15cb CR3: 000000001f933000 CR4: 00000000000006b0
[    2.602721] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.602721] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
[    2.602721] Stack:
[    2.602721]  0000000000000000 ffff88001f96fb18 ffff880019d4f000 ffff88001f96fb18
[    2.602721]  ffff880019d4f000 ffffffff81332105 ffff88001f96fb50 ffffffff814464c0
[    2.602721]  ffff88001f96fb18 ffff88001f904600 ffff880019d4f000 ffffffff813326e5
[    2.602721] Call Trace:
[    2.602721]  [<ffffffff81332105>] ? __switchdev_port_obj_add+0x25/0x90
[    2.602721]  [<ffffffff813326e5>] ? switchdev_port_obj_add+0x25/0xc0
[    2.602721]  [<ffffffff813327b1>] ? switchdev_port_fdb_add+0x31/0x40
[    2.602721]  [<ffffffff8123911f>] ? rtnl_fdb_add+0xff/0x1e0
[    2.602721]  [<ffffffff81237d8e>] ? rtnetlink_rcv_msg+0x7e/0x250
[    2.602721]  [<ffffffff8121d1ce>] ? __skb_recv_datagram+0xfe/0x4b0
[    2.602721]  [<ffffffff81237d10>] ? rtnetlink_rcv+0x30/0x30
[    2.602721]  [<ffffffff81247958>] ? netlink_rcv_skb+0xa8/0xd0
[    2.602721]  [<ffffffff81237cff>] ? rtnetlink_rcv+0x1f/0x30
[    2.602721]  [<ffffffff81247220>] ? netlink_unicast+0x150/0x200
[    2.602721]  [<ffffffff81247714>] ? netlink_sendmsg+0x374/0x3e0
[    2.602721]  [<ffffffff8120f8df>] ? sock_sendmsg+0xf/0x30
[    2.602721]  [<ffffffff8120ffd3>] ? ___sys_sendmsg+0x1f3/0x200
[    2.602721]  [<ffffffff812100e5>] ? ___sys_recvmsg+0x105/0x140
[    2.602721]  [<ffffffff810a36f0>] ? SyS_readahead+0x90/0x90
[    2.602721]  [<ffffffff81098dfd>] ? filemap_map_pages+0x1ed/0x210
[    2.602721]  [<ffffffff810b77fc>] ? handle_mm_fault+0x5fc/0xe50
[    2.602721]  [<ffffffff81210ef9>] ? __sys_sendmsg+0x39/0x70
[    2.602721]  [<ffffffff8133ce17>] ? system_call_fastpath+0x12/0x6a
[    2.602721] Code: b7 8f a0 06 00 00 48 83 bf 88 06 00 00 00 74 1d 48 83 c4 08 89 ee 4c 89 ef 5b 5d 41 5c 41 5d 0f b7 c9 45 31 c0 e9 51 db ff ff 90 <0f> 0b b8 ea ff ff ff e9 cf fe ff ff 0f 1f 40 00 41 57 41 56 b9
[    2.602721] RIP  [<ffffffff811f1470>] rocker_port_obj_add+0x150/0x160
[    2.602721]  RSP <ffff88001f96fa98>
[    2.615848] ---[ end trace 4f7b4f1c98077108 ]---

The above is resolved by not adding the new FDB entry to the FDB table
if trans == SWITCHDEV_TRANS_PREPARE.

For symmetry this patch also skips deleting FDB entries from the FDB
table trans == SWITCHDEV_TRANS_PREPARE. However, my analysis is that
this never occurs as trans is always SWITCHDEV_TRANS_NONE when removing
FDB entries.

Fixes: c4f20321 ("rocker: support prepare-commit transaction model")
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rocker_port_fdb_flush() is called by rocker_port_stp_update() which in
turn may be called with trans == SWITCHDEV_TRANS_PREPARE and then
trans == SWITCHDEV_TRANS_COMMIT from switchdev_port_attr_set() via
br_set_state().

When rocker_port_fdb_flush() is called with trans == SWITCHDEV_TRANS_PREPARE
it calls rocker_port_fdb_learn() for each entry in the FDB table which in
turn calls rocker_flow_tbl_bridge() which will allocate memory using
rocker_port_kzalloc(). rocker_port_fdb_learn() will then remove the entry
from the FDB table.

Then when rocker_port_fdb_learn() is called with
trans == SWITCHDEV_TRANS_PREPARE no calls are made to rocker_port_fdb_learn()
because there are no longer any entries present in the FDB table. Thus the
memory previously allocated by rocker_port_fdb_learn() is leaked resulting
in the kernel BUG() below.

Furthermore, it looks like the driver ends up with an incorrect view of the
fdb table as the FDB entries are purged from the driver's table but not the
hardware's table.

ip link add br0 type bridge
ip link set up dev eth0
sleep 1
ip link set dev eth0 master br0
[    3.704360] ------------[ cut here ]------------
[    3.704611] kernel BUG at drivers/net/ethernet/rocker/rocker.c:4289!
[    3.704962] invalid opcode: 0000 [#1] SMP
[    3.705537] Modules linked in:
[    3.705919] CPU: 0 PID: 63 Comm: ip Not tainted 4.1.0-rc3-01046-gb9fbe709 #1044
[    3.706191] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.0-0-g4c59f5d-20150219_092859-nilsson.home.kraxel.org 04/01/2014
[    3.706820] task: ffff880019f70150 ti: ffff88001f92c000 task.ti: ffff88001f92c000
[    3.707138] RIP: 0010:[<ffffffff811f0080>]  [<ffffffff811f0080>] rocker_port_attr_set+0xe0/0xf0
[    3.707990] RSP: 0018:ffff88001f92f808  EFLAGS: 00000212
[    3.708200] RAX: ffff880019d4fa68 RBX: ffff880019d4f000 RCX: 0000000000000000
[    3.708471] RDX: 000000000000000c RSI: ffff88001f92f890 RDI: ffff880019d4f680
[    3.708740] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000004
[    3.708999] R10: ffff880000034024 R11: 0000000000000000 R12: ffff88001f92f890
[    3.709276] R13: ffff88001f8f1c00 R14: 000000000000000b R15: 0000000000000000
[    3.709303] FS:  00007f8ab66bd700(0000) GS:ffff88001b000000(0000) knlGS:0000000000000000
[    3.709303] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.709303] CR2: 0000000000654988 CR3: 000000001f8f3000 CR4: 00000000000006b0
[    3.709303] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.709303] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
[    3.709303] Stack:
[    3.709303]  ffff88001f8f1c00 000000000000000b ffff88001f92f890 ffff880019d4f000
[    3.709303]  ffff88001f92f890 ffffffff813332f5 ffff88001f92f880 0000000000000000
[    3.709303]  ffff88001f92f890 0000000000000001 ffff880019d4f000 ffffffff81333627
[    3.709303] Call Trace:
[    3.709303]  [<ffffffff813332f5>] ? __switchdev_port_attr_set+0x25/0x90
[    3.709303]  [<ffffffff81333627>] ? switchdev_port_attr_set+0x27/0x120
[    3.709303]  [<ffffffff81318e86>] ? br_set_state+0x36/0x50
[    3.709303]  [<ffffffff8131795c>] ? br_add_if+0x37c/0x400
[    3.709303]  [<ffffffff81238ce1>] ? do_setlink+0x7e1/0x800
[    3.709303]  [<ffffffff8111f980>] ? radix_tree_lookup_slot+0x10/0x30
[    3.709303]  [<ffffffff81136fba>] ? nla_parse+0xaa/0x110
[    3.709303]  [<ffffffff81239c98>] ? rtnl_newlink+0x548/0x870
[    3.709303]  [<ffffffff8111f900>] ? __radix_tree_lookup+0x40/0xb0
[    3.709303]  [<ffffffff81136f3e>] ? nla_parse+0x2e/0x110
[    3.709303]  [<ffffffff81237d7e>] ? rtnetlink_rcv_msg+0x7e/0x250
[    3.709303]  [<ffffffff8121d1be>] ? __skb_recv_datagram+0xfe/0x4b0
[    3.709303]  [<ffffffff81237d00>] ? rtnetlink_rcv+0x30/0x30
[    3.709303]  [<ffffffff81247948>] ? netlink_rcv_skb+0xa8/0xd0
[    3.709303]  [<ffffffff81237cef>] ? rtnetlink_rcv+0x1f/0x30
[    3.709303]  [<ffffffff81247210>] ? netlink_unicast+0x150/0x200
[    3.709303]  [<ffffffff81247704>] ? netlink_sendmsg+0x374/0x3e0
[    3.709303]  [<ffffffff8120f8cf>] ? sock_sendmsg+0xf/0x30
[    3.709303]  [<ffffffff8120ffc3>] ? ___sys_sendmsg+0x1f3/0x200
[    3.709303]  [<ffffffff812100d5>] ? ___sys_recvmsg+0x105/0x140
[    3.709303]  [<ffffffff812228d9>] ? dev_get_by_name_rcu+0x69/0x90
[    3.709303]  [<ffffffff812228d9>] ? dev_get_by_name_rcu+0x69/0x90
[    3.709303]  [<ffffffff81217b7d>] ? skb_dequeue+0x4d/0x60
[    3.709303]  [<ffffffff81217bb0>] ? skb_queue_purge+0x20/0x30
[    3.709303]  [<ffffffff810ebdcf>] ? __inode_wait_for_writeback+0x5f/0xb0
[    3.709303]  [<ffffffff810648b0>] ? autoremove_wake_function+0x30/0x30
[    3.709303]  [<ffffffff81210ee9>] ? __sys_sendmsg+0x39/0x70
[    3.709303]  [<ffffffff8133e097>] ? system_call_fastpath+0x12/0x6a
[    3.709303] Code: bb 90 06 00 00 48 c7 04 24 00 00 00 00 45 31 c9 45 31 c0 48 c7 c1 c0 b7 1e 81 89 ea e8 da da ff ff eb 95 0f 1f 84 00 00 00 00 00 <0f> 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 83 fe 15 75
[    3.709303] RIP  [<ffffffff811f0080>] rocker_port_attr_set+0xe0/0xf0
[    3.709303]  RSP <ffff88001f92f808>
[    3.721409] ---[ end trace b7481fcb7cb032aa ]---
Segmentation fault

Fixes: c4f20321 ("rocker: support prepare-commit transaction model")
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>