- 08 Jun, 2015 3 commits
-
-
Avinash Patil authored
This patch adds more detailed information about association failures - reason and states. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Felix Fietkau authored
AR93xx and newer needs to stop rx before tx to avoid getting the DMA engine or MAC into a stuck state. This should reduce/fix the occurence of "Failed to stop Tx DMA" logspam. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Julia Lawall authored
Delete jump to a label on the next line, when that label is not used elsewhere. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier l; @@ -if (...) goto l; -l: // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
- 04 Jun, 2015 24 commits
-
-
Wei Liu authored
Xen virtual network driver has higher latency than a physical NIC. Having only 128K as limit for TSQ introduced 30% regression in guest throughput. This patch raises the limit to 256K. This reduces the regression to 8%. This buys us more time to work out a proper solution in the long run. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tcp_v4_rcv() checks the following before calling tcp_v4_do_rcv(): if (th->doff < sizeof(struct tcphdr) / 4) goto bad_packet; if (!pskb_may_pull(skb, th->doff * 4)) goto discard_it; So following check in tcp_v4_do_rcv() is redundant and "goto csum_err;" is wrong anyway. if (skb->len < tcp_hdrlen(skb) || ...) goto csum_err; A second check can be removed after no_tcp_socket label for same reason. Same tests can be removed in tcp_v6_do_rcv() Note : short tcp frames are not properly accounted in tcpInErrs MIB, because pskb_may_pull() failure simply drops incoming skb, we might fix this in a separate patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Scott Feldman says: ==================== switchdev: documentation updates Update the switchdev documentation to clarify that for IPV4 FIB object, the add op is used for both adding and modifying the FIB entry on the device. I found a few other white-space and grammer issues to fix, and to clarify the static FDB ops. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Scott Feldman authored
Clarify in documentation and code that IPV4 FIB add operation is used for both adding a new FIB entry to the device and for modifying an existing FIB entry on the device. Also, remove left-over references to ipv4_fib ops and replace with details on SWITCHDEV_PORT_IPV4_FIB object. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Scott Feldman authored
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Scott Feldman authored
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Scott Feldman authored
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2015-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== new driver mt7601u for MediaTek Wi-Fi devices MT7601U ath10k: * qca6174 power consumption improvements, enable ASPM etc (Michal) wil6210: * support Wi-Fi Simple Configuration in STA mode iwlwifi: * a few fixes (re-enablement of interrupts for certain new platforms that have special power states) * Rework completely the RBD allocation model towards new multi RX hardware. * cleanups * scan reworks continuation (Luca) mwifiex: * improve firmware debug functionality rtlwifi: * update regulatory database brcmfmac: * cleanup and new feature support in PCIe code * alternative nvram loading for router support ==================== Conflicts: drivers/net/wireless/iwlwifi/Kconfig Trivial conflict in iwlwifi Kconfig, two commits adding the same two chip numbers to the help text, but order transposed. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4: Adds support for various ethtool stats This patch series adds the following: Adds support to dump adapter specific stats in ethtool Adds support to dump channel stats in ethtool Adds support to dump loopback port stats in ethtool Remove wake-on-lan get/set ethtool support This patch series has been created against net-next tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Remove ethtool get/set support for wake on lan, adapter doesn't support it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Add support in ethtool to dump loopback port statistics Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Add support in ethtool to dump adapter channel stats Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Add ethtool support to get adapter specific hardware statistics Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== pull request: batman-adv 20150603 here you have our second batch of patches intended for net-next. In this patchset you won't find any new features, but quite some code cleanup work, a bunch of code style fixes and also comments corrections by Markus Pargmann. Moreover you have a patch from Sven Eckelmann removing an unnecessary NULL check in batadv_iv_ogm_update_seqnos(). Please pull or let me know of any problem! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rasmus Villemoes authored
Currently, two of the branches are dead code, since an earlier smaller substring would have been found ("TP" in the "TP_NW" case and either of "BNC" and "AUI" in the "BNC_AUI" case). Rearrange the strstr() calls so that the longer strings are searched for first. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-06-03 This series contains updates to e1000e only. Yanir provides 8 fixes and 1 version bump for e1000e. First fix resolves a possible unit hang if multiple descriptors are available in the rings during reset or runtime suspend. Fixed a warning on SPARC compile based on a suggested solution from Alex Duyck. Fixed a logical error, where a "if" condition under which a flush should occur, was revered. Fixed a hardware issue that prevented i219 from working in legacy interrupts mode. Fixed the hardware clock configuration and suprious non-linear increment. Lastly, fixed a system hang which occurred during execution of "ethtool -t <NIC>", by disabling MULR for the loopback test to avoid the hand state. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
Allow eBPF programs attached to classifier/actions to call bpf_clone_redirect(skb, ifindex, flags) helper which will mirror or redirect the packet by dynamic ifindex selection from within the program to a target device either at ingress or at egress. Can be used for various scenarios, for example, to load balance skbs into veths, split parts of the traffic to local taps, etc. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Carol Soto authored
fix typo in mlx4_set_vf_mac Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Carol Soto authored
If mlx4_enable_sriov is called by adapter without this feature MLX4_DEV_CAP_FLAG2_SYS_EQS then during this path the function alloc icm is called twice without freeing the structures from the first time. Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Carol L Soto authored
If user loads mlx4_core with num_vfs greater than supported then variable dev->dev_vfs is freed 2 times after unloading the driver. Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Malcolm authored
This code in drivers/net/ethernet/dec/tulip/uli526x.c function "uli526x_timer": 1086 } else 1087 if ((tmp_cr12 & 0x3) && db->link_failed) { [...snip...] 1109 } 1110 else if(!(tmp_cr12 & 0x3) && db->link_failed) 1111 { [...snip...] 1117 } 1118 db->init=0; is misleadingly indented: the db->init=0 is indented as if part of the else clause at line 1086, but it is independent of it (no braces before the "if" at line 1087). This patch fixes the indentation to reflect the actual meaning of the code, though is it actually meant to be part of the "else" clause? (I'm a compiler developer, not a kernel person). It also adds spaces around the assignment, to placate checkpatch.pl. Seen via an experimental new gcc warning I'm working on for gcc 6, -Wmisleading-indentation, using gcc r223098 adding -Werror=misleading-indentation to KBUILD_CFLAGS in Makefile. The experimental GCC emits this warning (as an error), rightly IMHO: drivers/net/ethernet/dec/tulip/uli526x.c: In function ‘uli526x_timer’: drivers/net/ethernet/dec/tulip/uli526x.c:1118:3: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] db->init=0; ^ drivers/net/ethernet/dec/tulip/uli526x.c:1086:4: note: ...this ‘else’ clause, but it is not } else ^ Hope this is helpful Dave Signed-off-by: David Malcolm <dmalcolm@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Murphy authored
Add support for the TI dp83867 Gigabit ethernet phy device. The DP83867 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antonio Murdaca authored
use the time_after_eq macro for jiffies comparison operation Signed-off-by: Antonio Murdaca <antonio.murdaca@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
When CONFIG_RFS_ACCEL or SMP aren't set, we fail to build, fix it. Also, avoid build warning as of unused function on that setup. Fixes: c66fa19c ('net/mlx4: Add EQ pool') Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Jun, 2015 13 commits
-
-
Markus Pargmann authored
Remove ret variable and all jumps. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
-
Markus Pargmann authored
We can avoid this indirect return variable by directly returning the error values. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
-
Markus Pargmann authored
Declare the returntype of batadv_compare_eth as bool. The function called inside this helper function (ether_addr_equal_unaligned) also uses bool as return value, so there is no need to return int. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
-
Markus Pargmann authored
It is much clearer to see a bool type as return value than 'int' for functions that are supposed to return true or false. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
-
Sven Eckelmann authored
orig_ifinfo is dereferenced multiple times in batadv_iv_ogm_update_seqnos before the check for NULL is done. The function also exists at the beginning when orig_ifinfo would have been NULL. This makes the check at the end unnecessary and only confuses the reader/code analyzers. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
-
Markus Pargmann authored
batadv_orig_bat_iv->bcast_own is actually not a bitfield, it is an array. Adjust the comment accordingly. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
-
Yanir Lubetkin authored
Bump the version to reflect the driver changes and bug fixes for i219. Also update the copyright, while we are at it. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Yanir Lubetkin authored
System would hang during execution of "ethtool -t <NIC>" for the same reason that required flushing the descriptor rings. This fix disables MULR for the loopback test to avoid the hang state. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Yanir Lubetkin authored
Two issues involving systim were reported. 1. Clock is not running in the correct frequency 2. In some situations, systim values were not incremented linearly This patch fixes the hardware clock configuration and the spurious non-linear increment. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Yanir Lubetkin authored
This fix handles a hardware issue that prevented i219 from working in legacy interrupts mode (IntMode=0) Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Yanir Lubetkin authored
The indication that a descriptor ring flush is required was read from FEXTNVM7 by mistake. It should be read from the PCI config space. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Yanir Lubetkin authored
The condition under which the flush should occur was reversed. The fix should be applied before any HW reset (unless followed by bus reset) and before any power state transition from D0. If E1000_FEXTNVM7_NEED_DESCRING_FLUSH bit is set in FEXTNVM7 and TDLEN > 0 the Tx ring should be flushed. (fixes ~95% of the hang states). If the E1000_FEXTNVM7_NEED_DESCRING_FLUSH did not clear, we should also flush the RX ring. Bug was caught by Alexander Duyck during a code review when examining this fix. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Yanir Lubetkin authored
Fixes a warning that was reported by Yanjiang Jin <yanjiang.jin@windriver.com> by implementing the solution suggested by Alexander Duyck <alexander.h.duyck@redhat.com>. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-