- 21 Jul, 2018 13 commits
-
-
Nicolas Pitre authored
Also mention that the traditional devices provide glyph values whereas /dev/vcsu* is unicode based. Suggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Nicolas Pitre <nico@linaro.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Pitre authored
Make sure the unicode screen buffer matches the video screen content. This is provided for debugging convenience and disabled by default. Signed-off-by:
-
Adam Borowski authored
This preserves whatever was written even if we can't currently display the given glyph. Mouse paste won't corrupt any character of wcwidth() == 1 anymore. Note that for now uniscr doesn't get allocated until something reads /dev/vcsuN for that console, making this code dormant for most users. Signed-off-by:
Adam Borowski <kilobyte@angband.pl> Acked-by:
-
Adam Borowski authored
Those above U+10FFFF get replaced with U+FFFD. Signed-off-by:
-
Adam Borowski authored
All the helper function saved us was a cast. Signed-off-by:
-
Matthijs van Duin authored
It was being ignored because the flags were not passed to fd allocation. Fixes: 54ebbfb1 ("tty: add TIOCGPTPEER ioctl") Signed-off-by:
Matthijs van Duin <matthijsvanduin@gmail.com> Acked-by:
Aleksa Sarai <asarai@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
Serial aliases are optional since commit 7678f4c2 ("serial: sh-sci: Add support for dynamic instances"). Update the DT bindings to reflect this. Signed-off-by:
-
Geert Uytterhoeven authored
No later code uses the assigned value, so it can be dropped. Reported-by:
Simon Horman <horms@verge.net.au> Fixes: 2c4ee235 ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by:
-
Andy Shevchenko authored
Describe all memebers in struct exar8250_board, otherwise we get a warning: drivers/tty/serial/8250/8250_exar.c:122: warning: Function parameter or member 'has_slave' not described in 'exar8250_board' drivers/tty/serial/8250/8250_exar.c:122: warning: Function parameter or member 'setup' not described in 'exar8250_board' drivers/tty/serial/8250/8250_exar.c:122: warning: Function parameter or member 'exit' not described in 'exar8250_board' No functional change intended. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Exar UARTs by default supports only up to 8 channels, all above go as extension. Thus, there is no need to have an additional property to distinguish them from first ones. Signed-off-by:
-
Phil Edworthy authored
The Renesas RZ/N1 UART is based on the Synopsys DW UART, but has additional registers for DMA. This patch does not address the changes required for DMA support, it simply adds the compatible string. Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Phil Edworthy authored
The RZ/N1 UART is a modified Synopsys DesignWare UART. The modifications only relate to DMA so you could actually use the controller with the Synopsys compatible string if you are not using DMA, but you should not do so. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Geert Uytterhoeven authored
sci_request_irq() checks port->irqstr[j] for a NULL pointer, to decide if a fallback interrupt name string should be allocated or not. While this string is freed during port shutdown, the pointer is not zeroed. Hence on a subsequent startup of the port, it will still be pointing to the freed memory, leading to e.g. WARNING: CPU: 0 PID: 404 at fs/proc/generic.c:388 __proc_create+0xbc/0x260 name len 0 or to a crash (the latter is more likely with CONFIG_DEBUG_SLAB=y, due to the poisoning of freed memory). Instead of zeroeing the pointer at multiple places, preinitialize port->irqstr[j] to zero to fix this. Fixes: 8b0bbd95 ("serial: sh-sci: Add support for R7S9210") Signed-off-by:Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by:
-
- 16 Jul, 2018 8 commits
-
-
Johan Hovold authored
Since commit edc6afc5 ("[PATCH] tty: switch to ktermios and new framework") arbitrary baud rates can be requested using BOTHER and input rates can be requested using the termios CIBAUD bits (CBAUD shifted IBSHIFT bits). This functionality has been conditionally compiled depending on whether an architecture defines BOTHER and IBSHIFT respectively, but would in fact fail to compile unless both symbols were defined due to cross dependencies. Relax the IBSHIFT => BOTHER dependency so that an architecture could theoretically support CIBAUD without the Linux-specific BOTHER, while hopefully making the current conditional-compilation directives a bit less confusing. Note that the long-term goal is still to have all architectures support both features, so an alternative could just be to have the lot depend on BOTHER. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
When the termios CIBAUD bits are left unset (i.e. B0), we use the same output and input speed and should leave CIBAUD unchanged. When the user requests a rate using BOTHER and c_ospeed which the driver cannot set exactly, the driver can report back the actual baud rate using tty_termios_encode_baud_rate(). If this rate is close enough to a standard rate however, we could end up setting CIBAUD to a Bfoo value despite the user having left it unset. This in turn could lead to an unexpected input rate being set on subsequent termios updates. Fix this by using a zero tolerance value also for the input rate when CIBAUD is clear so that the matching logic works as expected. Fixes: 78137e3b ("[PATCH] tty: improve encode_baud_rate logic") Signed-off-by:
-
Johan Hovold authored
Make sure to clear the CIBAUD bits before OR-ing the new mask when encoding the termios input baud rate. This could otherwise lead to an incorrect input rate being reported back and incidentally set on subsequent termios updates. Fixes: edc6afc5 ("[PATCH] tty: switch to ktermios and new framework") Signed-off-by:
-
Girish Mahadevan authored
Add support for flow control functionality in the GENI serial driver and also support for non-console higher baud rate(upto 4Mbps) usecases. Signed-off-by:
Girish Mahadevan <girishm@codeaurora.org> Signed-off-by:
Mohammed Khajapasha <mkhaja@codeaurora.org> Signed-off-by:
Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Signed-off-by:
-
Alexander Sverdlin authored
If the IRQ controller is not yet probed do not proceed with irq=0, try to defer the probe. Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
Alexander Sverdlin authored
Don't dispose IRQ mapping before it has been created. Fixes: aa959474 ("serial: 8250_of: Add IO space support") Signed-off-by:
-
Chris Brandt authored
Add R7S9210 (RZ/A2) support Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Reviewed-by:
-
Chris Brandt authored
Add support for a "RZ_SCIFA" which is different than a traditional SCIFA. It looks like a normal SCIF with FIFO data, but with a compressed address space. Also, the break out of interrupts are different then traditinal SCIF: ERI/BRI, RXI, TXI, TEI, DRI. The R7S9210 (RZ/A2) contains this type of SCIF. Signed-off-by:
-
- 15 Jul, 2018 1 commit
-
-
Sean Wang authored
In order to open up the required power gate before any operation can be effectively performed over the serial bus between CPU and serdev, it's clearly essential to add common attach functions for PM domains to serdev at the probe phase. Similarly, the relevant dettach function for the PM domains should be properly and reversely added at the remove phase. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by:
-
- 13 Jul, 2018 2 commits
-
-
Colin Ian King authored
Pointer ch is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'ch' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Tycho Andersen authored
We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d #20 [ffff88085c6dbeb0] kthread at ffffffff81096384 #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by:Tycho Andersen <tycho@tycho.ws> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
- 12 Jul, 2018 3 commits
-
-
Jisheng Zhang authored
For Synopsys DesignWare 8250 uart which version >= 4.00a, there's a valid divisor latch fraction register. The fractional divisor width is 4bits ~ 6bits. Now the preparation is done, it's easy to add the feature support. This patch firstly tries to get the fractional divisor width during probe, then setups dw specific get_divisor() and set_divisor() hook. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by:
-
Jisheng Zhang authored
Some drivers could call serial8250_do_set_divisor() to complete its own set_divisor routine. Export this symbol for code reusing. Signed-off-by:
-
Jisheng Zhang authored
Add these two hooks so that they can be overridden with driver specific implementations. Signed-off-by:
-
- 07 Jul, 2018 3 commits
-
-
Samuel Thibault authored
This completes dead keys definitions for internationalization completeness on the console. The representatives have been chosen coherently with libx11 compose sequences, which avoid symetry conflicts (e.g. there is U with caron, but no c with breve). Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
-
Colin Ian King authored
The WCH CH382L PCIe adapter has 1 parallel port but unlike the similar WCH CH328 adapter there are no serial ports connected to it. Enable this adapter with the addition of the appropriate PCIe IDs and board support config. PCIe device ID 1c00:3050: 02:00.0 Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850]) Subsystem: Device 1c00:3050 Flags: fast devsel, IRQ 16 I/O ports at 2000 [size=256] Memory at d0000000 (32-bit, prefetchable) [size=32K] I/O ports at 2100 [size=4] Expansion ROM at b0200000 [disabled] [size=32K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/32 Maskable+ 64bit+ Capabilities: [80] Express Legacy Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Kernel driver in use: parport_pc Kernel modules: parport_pc, parport_serial Signed-off-by:
-
Andy Shevchenko authored
There are several extended (in comparison to the traditional 16550) registers are present in Synopsys DesignWare UART. All of them are 32-bit ones. Introduce helpers to simplify access to them and convert existing users. Signed-off-by:
-
- 06 Jul, 2018 8 commits
-
-
Mars Cheng authored
Update the dt-binding documentation of sysirq for mt6765 Signed-off-by:
Mars Cheng <mars.cheng@mediatek.com> Reviewed-by:
-
Mars Cheng authored
Add documentation for mt6765 uart dt-bindings Signed-off-by:
-
Mars Cheng authored
Update binding document for mt6765 reference board Signed-off-by:
-
Jisheng Zhang authored
Align serial8250_get_divisor() with serial8250_set_divisor() to accept uart_port pointer as the first parameter. No functionality changes. Signed-off-by:
-
Geert Uytterhoeven authored
As of commit b36f09c3 ("dmaengine: Add transfer termination synchronization support"), dmaengine_terminate_all() is deprecated. Replace calls to dmaengine_terminate_all() in DMA release code by calls to dmaengine_terminate_sync(), as the latter waits until all running completion callbacks have finished. Replace calls to dmaengine_terminate_all() in DMA failure paths by calls to dmaengine_terminate_async(), as these are usually done in atomic context. Signed-off-by:
-
Geert Uytterhoeven authored
The transmit DMA workqueue is never stopped, hence the work function may be called after the port has been shut down. Fix this race condition by cancelling queued work, if any, before DMA release. Don't initialize the work if DMA initialization failed, as it won't be used anyway. Signed-off-by:
-
Geert Uytterhoeven authored
When the sh-sci driver detects an issue with DMA during operation, it falls backs to PIO, and releases all DMA resources. As releasing DMA resources immediately has no advantages, but complicates the code, and is susceptible to races, it is better to postpone this to port shutdown. This allows to remove the locking from sci_rx_dma_release() and sci_tx_dma_release(), but requires keeping a copy of the DMA channel pointers for release during port shutdown. Signed-off-by:
-
Geert Uytterhoeven authored
The RX FIFO timer may be armed when the port is shut down, hence the timer function may still be called afterwards. Fix this race condition by deleting the timer during port shutdown. Fixes: 03940376 ("serial: sh-sci: SCIFA/B RX FIFO software timeout") Signed-off-by:
-
- 02 Jul, 2018 1 commit
-
-
Greg Kroah-Hartman authored
We want ths tty core changes in here as well. Signed-off-by:
-
- 01 Jul, 2018 1 commit
-
-
Linus Torvalds authored
-
