Currently DAX read fault can race with write(2) in the following way:

CPU1 - write(2)			CPU2 - read fault
				dax_iomap_pte_fault()
				  ->iomap_begin() - sees hole
dax_iomap_rw()
  iomap_apply()
    ->iomap_begin - allocates blocks
    dax_iomap_actor()
      invalidate_inode_pages2_range()
        - there's nothing to invalidate
				  grab_mapping_entry()
				  - we add zero page in the radix tree
				    and map it to page tables

The result is that hole page is mapped into page tables (and thus zeros
are seen in mmap) while file has data written in that place.

Fix the problem by locking exception entry before mapping blocks for the
fault.  That way we are sure invalidate_inode_pages2_range() call for
racing write will either block on entry lock waiting for the fault to
finish (and unmap stale page tables after that) or read fault will see
already allocated blocks by write(2).

Fixes: 9f141d6e
Link: http://lkml.kernel.org/r/20170510085419.27601-5-jack@suse.czSigned-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

DAX will return to locking exceptional entry before mapping blocks for a
page fault to fix possible races with concurrent writes.  To avoid lock
inversion between exceptional entry lock and transaction start, start
the transaction already in ext4_dax_huge_fault().

Fixes: 9f141d6e
Link: http://lkml.kernel.org/r/20170510085419.27601-4-jack@suse.czSigned-off-by: Jan Kara <jack@suse.cz>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, we didn't invalidate page tables during invalidate_inode_pages2()
for DAX.  That could result in e.g. 2MiB zero page being mapped into
page tables while there were already underlying blocks allocated and
thus data seen through mmap were different from data seen by read(2).
The following sequence reproduces the problem:

 - open an mmap over a 2MiB hole

 - read from a 2MiB hole, faulting in a 2MiB zero page

 - write to the hole with write(3p). The write succeeds but we
   incorrectly leave the 2MiB zero page mapping intact.

 - via the mmap, read the data that was just written. Since the zero
   page mapping is still intact we read back zeroes instead of the new
   data.

Fix the problem by unconditionally calling invalidate_inode_pages2_range()
in dax_iomap_actor() for new block allocations and by properly
invalidating page tables in invalidate_inode_pages2_range() for DAX
mappings.

Fixes: c6dcf52c
Link: http://lkml.kernel.org/r/20170510085419.27601-3-jack@suse.czSigned-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "mm,dax: Fix data corruption due to mmap inconsistency",
v4.

This series fixes data corruption that can happen for DAX mounts when
page faults race with write(2) and as a result page tables get out of
sync with block mappings in the filesystem and thus data seen through
mmap is different from data seen through read(2).

The series passes testing with t_mmap_stale test program from Ross and
also other mmap related tests on DAX filesystem.

This patch (of 4):

dax_invalidate_mapping_entry() currently removes DAX exceptional entries
only if they are clean and unlocked.  This is done via:

  invalidate_mapping_pages()
    invalidate_exceptional_entry()
      dax_invalidate_mapping_entry()

However, for page cache pages removed in invalidate_mapping_pages()
there is an additional criteria which is that the page must not be
mapped.  This is noted in the comments above invalidate_mapping_pages()
and is checked in invalidate_inode_page().

For DAX entries this means that we can can end up in a situation where a
DAX exceptional entry, either a huge zero page or a regular DAX entry,
could end up mapped but without an associated radix tree entry.  This is
inconsistent with the rest of the DAX code and with what happens in the
page cache case.

We aren't able to unmap the DAX exceptional entry because according to
its comments invalidate_mapping_pages() isn't allowed to block, and
unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem.

Since we essentially never have unmapped DAX entries to evict from the
radix tree, just remove dax_invalidate_mapping_entry().

Fixes: c6dcf52c ("mm: Invalidate DAX radix tree entries only if appropriate")
Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.czSigned-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>    [4.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Cc: Tigran Aivazian <aivazian.tigran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 1f5307b1 ("mm, vmalloc: properly track vmalloc users") has
pulled asm/pgtable.h include dependency to linux/vmalloc.h and that
turned out to be a bad idea for some architectures.  E.g.  m68k fails
with

   In file included from arch/m68k/include/asm/pgtable_mm.h:145:0,
                    from arch/m68k/include/asm/pgtable.h:4,
                    from include/linux/vmalloc.h:9,
                    from arch/m68k/kernel/module.c:9:
   arch/m68k/include/asm/mcf_pgtable.h: In function 'nocache_page':
>> arch/m68k/include/asm/mcf_pgtable.h:339:43: error: 'init_mm' undeclared (first use in this function)
    #define pgd_offset_k(address) pgd_offset(&init_mm, address)

as spotted by kernel build bot. nios2 fails for other reason

  In file included from include/asm-generic/io.h:767:0,
                   from arch/nios2/include/asm/io.h:61,
                   from include/linux/io.h:25,
                   from arch/nios2/include/asm/pgtable.h:18,
                   from include/linux/mm.h:70,
                   from include/linux/pid_namespace.h:6,
                   from include/linux/ptrace.h:9,
                   from arch/nios2/include/uapi/asm/elf.h:23,
                   from arch/nios2/include/asm/elf.h:22,
                   from include/linux/elf.h:4,
                   from include/linux/module.h:15,
                   from init/main.c:16:
  include/linux/vmalloc.h: In function '__vmalloc_node_flags':
  include/linux/vmalloc.h:99:40: error: 'PAGE_KERNEL' undeclared (first use in this function); did you mean 'GFP_KERNEL'?

which is due to the newly added #include <asm/pgtable.h>, which on nios2
includes <linux/io.h> and thus <asm/io.h> and <asm-generic/io.h> which
again includes <linux/vmalloc.h>.

Tweaking that around just turns out a bigger headache than necessary.
This patch reverts 1f5307b1 and reimplements the original fix in a
different way.  __vmalloc_node_flags can stay static inline which will
cover vmalloc* functions.  We only have one external user
(kvmalloc_node) and we can export __vmalloc_node_flags_caller and
provide the caller directly.  This is much simpler and it doesn't really
need any games with header files.

[akpm@linux-foundation.org: coding-style fixes]
[mhocko@kernel.org: revert old comment]
  Link: http://lkml.kernel.org/r/20170509211054.GB16325@dhcp22.suse.cz
Fixes: 1f5307b1 ("mm, vmalloc: properly track vmalloc users")
Link: http://lkml.kernel.org/r/20170509153702.GR6481@dhcp22.suse.czSigned-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

One return case of `__collapse_huge_page_swapin()` does not invoke
tracepoint while every other return case does.  This commit adds a
tracepoint invocation for the case.

Link: http://lkml.kernel.org/r/20170507101813.30187-1-sj38.park@gmail.comSigned-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Starting from GCC 7.1, __gcov_exit is a new symbol expected to be
implemented in a profiling runtime.

[akpm@linux-foundation.org: coding-style fixes]
[mliska@suse.cz: v2]
  Link: http://lkml.kernel.org/r/e63a3c59-0149-c97e-4084-20ca8f146b26@suse.cz
Link: http://lkml.kernel.org/r/8c4084fa-3885-29fe-5fc4-0d4ca199c785@suse.czSigned-off-by: Martin Liska <mliska@suse.cz>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After commit e2ecc8a7 ("mm, vmstat: print non-populated zones in
zoneinfo"), /proc/zoneinfo will show unpopulated zones.

A memoryless node, having no populated zones at all, was previously
ignored, but will now trigger the WARN() in is_zone_first_populated().

Remove this warning, as its only purpose was to warn of a situation that
has since been enabled.

Aside: The "per-node stats" are still printed under the first populated
zone, but that's not necessarily the first stanza any more.  I'm not
sure which criteria is more important with regard to not breaking
parsers, but it looks a little weird to the eye.

Fixes:  e2ecc8a7 ("mm, vmstat: print node-based stats in zoneinfo file")
Link: http://lkml.kernel.org/r/1493854905-10918-1-git-send-email-arbab@linux.vnet.ibm.comSigned-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All uses of the current_fs_time() function have been replaced by other
time interfaces.

And, its use cases can be fulfilled by current_time() or ktime_get_*
variants.

Link: http://lkml.kernel.org/r/1491613030-11599-13-git-send-email-deepa.kernel@gmail.comSigned-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Laurent Dufour has noticed that hwpoinsoned pages are kept charged.  In
his particular case he has hit a bad_page("page still charged to
cgroup") when onlining a hwpoison page.  While this looks like something
that shouldn't happen in the first place because onlining hwpages and
returning them to the page allocator makes only little sense it shows a
real problem.

hwpoison pages do not get freed usually so we do not uncharge them (at
least not since commit 0a31bc97 ("mm: memcontrol: rewrite uncharge
API")).  Each charge pins memcg (since e8ea14cc ("mm: memcontrol:
take a css reference for each charged page")) as well and so the
mem_cgroup and the associated state will never go away.  Fix this leak
by forcibly uncharging a LRU hwpoisoned page in delete_from_lru_cache().
We also have to tweak uncharge_list because it cannot rely on zero ref
count for these pages.

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 0a31bc97 ("mm: memcontrol: rewrite uncharge API")
Link: http://lkml.kernel.org/r/20170502185507.GB19165@dhcp22.suse.czSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sound fixes from Takashi Iwai:
 "This contains a one-liner change that has a significant impact:
  disabling the build of OSS. It's been unmaintained for long time, and
  we'd like to drop the stuff. Finally, as the first step, stop the
  build. Let's see whether it works without much complaints.

  Other than that, there are two small fixes for HD-audio"

* tag 'sound-fix-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  sound: Disable the build of OSS drivers
  ALSA: hda: Fix cpu lockup when stopping the cmd dmas
  ALSA: hda - Add mute led support for HP EliteBook 840 G3

Pull more power-supply updates from Sebastian Reichel:
 "The power-supply subsystem has a few more changes for the v4.12 merge
  window:

   - New battery driver for AXP20X and AXP22X PMICs

   - Improve max17042_battery for usage on x86

   - Misc small cleanups & fixes"

* tag 'for-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (34 commits)
  power: supply: cpcap-charger: Keep trickle charger bits disabled
  power: supply: cpcap-charger: Fix enable for 3.8V charge setting
  power: supply: cpcap-charger: Fix charge voltage configuration
  power: supply: cpcap-charger: Fix charger name
  power: supply: twl4030-charger: make twl4030_bci_property_is_writeable static
  power: supply: sbs-battery: Add alert callback
  mailmap: add Sebastian Reichel
  power: supply: avoid unused twl4030-madc.h
  power: supply: sbs-battery: Correct supply status with current draw
  power: supply: sbs-battery: Don't ignore the first external power change
  power: supply: pda_power: move from timer to delayed_work
  power: supply: max17042_battery: Add support for the SCOPE property
  power: supply: max17042_battery: Add support for the CHARGE_NOW property
  power: supply: max17042_battery: Add support for the CHARGE_FULL_DESIGN property
  power: supply: max17042_battery: mAh readings depend on r_sns value
  power: supply: max17042_battery: Add support for the VOLT_MIN property
  power: supply: max17042_battery: Add support for the TECHNOLOGY attribute
  power: supply: max17042_battery: Add external_power_changed callback
  power: supply: max17042_battery: Add support for the STATUS property
  power: supply: max17042_battery: Add default platform_data fallback data
  ...

Pull thermal management updates from Zhang Rui:

 - Fix a problem where orderly_shutdown() is called for multiple times
   due to multiple critical overheating events raised in a short period
   by platform thermal driver. (Keerthy)

 - Introduce a backup thermal shutdown mechanism, which invokes
   kernel_power_off()/emergency_restart() directly, after
   orderly_shutdown() being issued for certain amount of time(specified
   via Kconfig). This is useful in certain conditions that userspace may
   be unable to power off the system in a clean manner and leaves the
   system in a critical state, like in the middle of driver probing
   phase. (Keerthy)

 - Introduce a new interface in thermal devfreq_cooling code so that the
   driver can provide more precise data regarding actual power to the
   thermal governor every time the power budget is calculated. (Lukasz
   Luba)

 - Introduce BCM 2835 soc thermal driver and northstar thermal driver,
   within a new sub-folder. (Rafał Miłecki)

 - Introduce DA9062/61 thermal driver. (Steve Twiss)

 - Remove non-DT booting on TI-SoC driver. Also add support to fetching
   coefficients from DT. (Keerthy)

 - Refactorf RCAR Gen3 thermal driver. (Niklas Söderlund)

 - Small fix on MTK and intel-soc-dts thermal driver. (Dawei Chien,
   Brian Bian)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
  thermal: core: Add a back up thermal shutdown mechanism
  thermal: core: Allow orderly_poweroff to be called only once
  Thermal: Intel SoC DTS: Change interrupt request behavior
  trace: thermal: add another parameter 'power' to the tracing function
  thermal: devfreq_cooling: add new interface for direct power read
  thermal: devfreq_cooling: refactor code and add get_voltage function
  thermal: mt8173: minor mtk_thermal.c cleanups
  thermal: bcm2835: move to the broadcom subdirectory
  thermal: broadcom: ns: specify myself as MODULE_AUTHOR
  thermal: da9062/61: Thermal junction temperature monitoring driver
  Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding
  thermal: broadcom: add Northstar thermal driver
  dt-bindings: thermal: add support for Broadcom's Northstar thermal
  thermal: bcm2835: add thermal driver for bcm2835 SoC
  dt-bindings: Add thermal zone to bcm2835-thermal example
  thermal: rcar_gen3_thermal: add suspend and resume support
  thermal: rcar_gen3_thermal: store device match data in private structure
  thermal: rcar_gen3_thermal: enable hardware interrupts for trip points
  thermal: rcar_gen3_thermal: record and check number of TSCs found
  thermal: rcar_gen3_thermal: check that TSC exists before memory allocation
  ...

Pull drm fixes from Dave Airlie:
 "AMD, nouveau, one i915, and one EDID fix for v4.12-rc1

  Some fixes that it would be good to have in rc1. It contains the i915
  quiet fix that you reported.

  It also has an amdgpu fixes pull, with lots of ongoing work on Vega10
  which is new in this kernel and is preliminary support so may have a
  fair bit of movement.

  Otherwise a few non-Vega10 AMD fixes, one EDID fix and some nouveau
  regression fixers"

* tag 'drm-fixes-for-v4.12-rc1' of git://people.freedesktop.org/~airlied/linux: (144 commits)
  drm/i915: Make vblank evade warnings optional
  drm/nouveau/therm: remove ineffective workarounds for alarm bugs
  drm/nouveau/tmr: avoid processing completed alarms when adding a new one
  drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
  drm/nouveau/tmr: handle races with hw when updating the next alarm time
  drm/nouveau/tmr: ack interrupt before processing alarms
  drm/nouveau/core: fix static checker warning
  drm/nouveau/fb/ram/gf100-: remove 0x10f200 read
  drm/nouveau/kms/nv50: skip core channel cursor update on position-only changes
  drm/nouveau/kms/nv50: fix source-rect-only plane updates
  drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()
  drm/amd/powerplay: refine pwm1_enable callback functions for CI.
  drm/amd/powerplay: refine pwm1_enable callback functions for vi.
  drm/amd/powerplay: refine pwm1_enable callback functions for Vega10.
  drm/amdgpu: refine amdgpu pwm1_enable sysfs interface.
  drm/amdgpu: add amd fan ctrl mode enums.
  drm/amd/powerplay: add more smu message on Vega10.
  drm/amdgpu: fix dependency issue
  drm/amd: fix init order of sched job
  drm/amdgpu: add some additional vega10 pci ids
  ...

Pull SCSI target updates from Nicholas Bellinger:
 "Things were a lot more calm than previously expected. It's primarily
  fixes in various areas, with most of the new functionality centering
  around TCMU backend driver work that Xiubo Li has been driving.

  Here's the summary on the feature side:

   - Make T10-PI verify configurable for emulated (FILEIO + RD) backends
    (Dmitry Monakhov)
   - Allow target-core/TCMU pass-through to use in-kernel SPC-PR logic
    (Bryant Ly + MNC)
   - Add TCMU support for growing ring buffer size (Xiubo Li + MNC)
   - Add TCMU support for global block data pool (Xiubo Li + MNC)

  and on the bug-fix side:

   - Fix COMPARE_AND_WRITE non GOOD status handling for READ phase
    failures (Gary Guo + nab)
   - Fix iscsi-target hang with explicitly changing per NodeACL
    CmdSN number depth with concurrent login driven session
    reinstatement.  (Gary Guo + nab)
   - Fix ibmvscsis fabric driver ABORT task handling (Bryant Ly)
   - Fix target-core/FILEIO zero length handling (Bart Van Assche)

  Also, there was an OOPs introduced with the WRITE_VERIFY changes that
  I ended up reverting at the last minute, because as not unusual Bart
  and I could not agree on the fix in time for -rc1. Since it's specific
  to a conformance test, it's been reverted for now.

  There is a separate patch in the queue to address the underlying
  control CDB write overflow regression in >= v4.3 separate from the
  WRITE_VERIFY revert here, that will be pushed post -rc1"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (30 commits)
  Revert "target: Fix VERIFY and WRITE VERIFY command parsing"
  IB/srpt: Avoid that aborting a command triggers a kernel warning
  IB/srpt: Fix abort handling
  target/fileio: Fix zero-length READ and WRITE handling
  ibmvscsis: Do not send aborted task response
  tcmu: fix module removal due to stuck thread
  target: Don't force session reset if queue_depth does not change
  iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement
  target: Fix compare_and_write_callback handling for non GOOD status
  tcmu: Recalculate the tcmu_cmd size to save cmd area memories
  tcmu: Add global data block pool support
  tcmu: Add dynamic growing data area feature support
  target: fixup error message in target_tg_pt_gp_tg_pt_gp_id_store()
  target: fixup error message in target_tg_pt_gp_alua_access_type_store()
  target/user: PGR Support
  target: Add WRITE_VERIFY_16
  Documentation/target: add an example script to configure an iSCSI target
  target: Use kmalloc_array() in transport_kmap_data_sg()
  target: Use kmalloc_array() in compare_and_write_callback()
  target: Improve size determinations in two functions
  ...

Pull misc vfs updates from Al Viro:
 "Making sure that something like a referral point won't end up as pwd
  or root.

  The main part is the last commit (fixing mntns_install()); that one
  fixes a hard-to-hit race. The fchdir() commit is making fchdir(2) a
  bit more robust - it should be impossible to get opened files (even
  O_PATH ones) for referral points in the first place, so the existing
  checks are OK, but checking the same thing as in chdir(2) is just as
  cheap.

  The path_init() commit removes a redundant check that shouldn't have
  been there in the first place"

* 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make sure that mntns_install() doesn't end up with referral for root
  path_init(): don't bother with checking MAY_EXEC for LOOKUP_ROOT
  make sure that fchdir() won't accept referral points, etc.

Pull perf updates/fixes from Ingo Molnar:
 "Mostly tooling updates, but also two kernel fixes: a call chain
  handling robustness fix and an x86 PMU driver event definition fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/callchain: Force USER_DS when invoking perf_callchain_user()
  tools build: Fixup sched_getcpu feature test
  perf tests kmod-path: Don't fail if compressed modules aren't supported
  perf annotate: Fix AArch64 comment char
  perf tools: Fix spelling mistakes
  perf/x86: Fix Broadwell-EP DRAM RAPL events
  perf config: Refactor a duplicated code for obtaining config file name
  perf symbols: Allow user probes on versioned symbols
  perf symbols: Accept symbols starting at address 0
  tools lib string: Adopt prefixcmp() from perf and subcmd
  perf units: Move parse_tag_value() to units.[ch]
  perf ui gtk: Move gtk .so name to the only place where it is used
  perf tools: Move HAS_BOOL define to where perl headers are used
  perf memswap: Split the byteswap memory range wrappers from util.[ch]
  perf tools: Move event prototypes from util.h to event.h
  perf buildid: Move prototypes from util.h to build-id.h

Pull timer fix from Ingo Molnar:
 "A single ARM Juno clocksource driver fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/arm_arch_timer: Fix arch_timer_mem_find_best_frame()

Pull stackprotector fixlet from Ingo Molnar:
 "A single fix/enhancement to increase stackprotector canary randomness
  on 64-bit kernels with very little cost"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - two boot crash fixes
   - unwinder fixes
   - kexec related kernel direct mappings enhancements/fixes
   - more Clang support quirks
   - minor cleanups
   - Documentation fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel_rdt: Fix a typo in Documentation
  x86/build: Don't add -maccumulate-outgoing-args w/o compiler support
  x86/boot/32: Fix UP boot on Quark and possibly other platforms
  x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()
  x86/kexec/64: Use gbpages for identity mappings if available
  x86/mm: Add support for gbpages to kernel_ident_mapping_init()
  x86/boot: Declare error() as noreturn
  x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  x86/mm: Fix boot crash caused by incorrect loop count calculation in sync_global_pgds()
  x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic()
  x86/microcode/AMD: Remove redundant NULL check on mc

Pull xen fixes from Juergen Gross:
 "This contains two fixes for booting under Xen introduced during this
  merge window and two fixes for older problems, where one is just much
  more probable due to another merge window change"

* tag 'for-linus-4.12b-rc0c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: adjust early dom0 p2m handling to xen hypervisor behavior
  x86/amd: don't set X86_BUG_SYSRET_SS_ATTRS when running under Xen
  xen/x86: Do not call xen_init_time_ops() until shared_info is initialized
  x86/xen: fix xsave capability setting

Pull more powerpc updates from Michael Ellerman:
 "The change to the Linux page table geometry was delayed for more
  testing with 16G pages, and there's the new CPU features stuff which
  just needed one more polish before going in. Plus a few changes from
  Scott which came in a bit late. And then various fixes, mostly minor.

  Summary highlights:

   - rework the Linux page table geometry to lower memory usage on
     64-bit Book3S (IBM chips) using the Hash MMU.

   - support for a new device tree binding for discovering CPU features
     on future firmwares.

   - Freescale updates from Scott:
      "Includes a fix for a powerpc/next mm regression on 64e, a fix for
       a kernel hang on 64e when using a debugger inside a relocated
       kernel, a qman fix, and misc qe improvements."

  Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong,
  Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp"

* tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Support new device tree binding for discovering CPU features
  powerpc: Don't print cpu_spec->cpu_name if it's NULL
  of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle
  powerpc/64s: Fix unnecessary machine check handler relocation branch
  powerpc/mm/book3s/64: Rework page table geometry for lower memory usage
  powerpc: Fix distclean with Makefile.postlink
  powerpc/64e: Don't place the stack beyond TASK_SIZE
  powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery
  powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
  soc/fsl/qbman: Disable IRQs for deferred QBMan work
  soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions
  soc/fsl/qe: only apply QE_General4 workaround on affected SoCs
  soc/fsl/qe: round brg_freq to 1kHz granularity
  soc/fsl/qe: get rid of immrbar_virt_to_phys()
  net: ethernet: ucc_geth: fix MEM_PART_MURAM mode
  powerpc/64e: Fix hang when debugging programs with relocated kernel

Pull MIPS updates from James Hogan:
 "math-emu:
   - Add missing clearing of BLTZALL and BGEZALL emulation counters
   - Fix BC1EQZ and BC1NEZ condition handling
   - Fix BLEZL and BGTZL identification

  BPF:
   - Add JIT support for SKF_AD_HATYPE
   - Use unsigned access for unsigned SKB fields
   - Quit clobbering callee saved registers in JIT code
   - Fix multiple problems in JIT skb access helpers

  Loongson 3:
   - Select MIPS_L1_CACHE_SHIFT_6

  Octeon:
   - Remove vestiges of CONFIG_CAVIUM_OCTEON_2ND_KERNEL
   - Remove unused L2C types and macros.
   - Remove unused SLI types and macros.
   - Fix compile error when USB is not enabled.
   - Octeon: Remove unused PCIERCX types and macros.
   - Octeon: Clean up platform code.

  SNI:
   - Remove recursive include of cpu-feature-overrides.h

  Sibyte:
   - Export symbol periph_rev to sb1250-mac network driver.
   - Fix Kconfig warning.

  Generic platform:
   - Enable Root FS on NFS in generic_defconfig

  SMP-MT:
   - Use CPU interrupt controller IPI IRQ domain support

  UASM:
   - Add support for LHU for uasm.
   - Remove needless ISA abstraction

  mm:
   - Add 48-bit VA space and 4-level page tables for 4K pages.

  PCI:
   - Add controllers before the specified head

  irqchip driver for MIPS CPU:
   - Replace magic 0x100 with IE_SW0
   - Prepare for non-legacy IRQ domains
   - Introduce IPI IRQ domain support

  MAINTAINERS:
   - Update email-id of Rahul Bedarkar

  NET:
   - sb1250-mac: Add missing MODULE_LICENSE()

  CPUFREQ:
   - Loongson2: drop set_cpus_allowed_ptr()

  Misc:
   - Disable Werror when W= is set
   - Opt into HAVE_COPY_THREAD_TLS
   - Enable GENERIC_CPU_AUTOPROBE
   - Use common outgoing-CPU-notification code
   - Remove dead define of ST_OFF
   - Remove CONFIG_ARCH_HAS_ILOG2_U{32,64}
   - Stengthen IPI IRQ domain sanity check
   - Remove confusing else statement in __do_page_fault()
   - Don't unnecessarily include kmalloc.h into <asm/cache.h>.
   - Delete unused definition of SMP_CACHE_SHIFT.
   - Delete redundant definition of SMP_CACHE_BYTES"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (39 commits)
  MIPS: Sibyte: Fix Kconfig warning.
  MIPS: Sibyte: Export symbol periph_rev to sb1250-mac network driver.
  NET: sb1250-mac: Add missing MODULE_LICENSE()
  MAINTAINERS: Update email-id of Rahul Bedarkar
  MIPS: Remove confusing else statement in __do_page_fault()
  MIPS: Stengthen IPI IRQ domain sanity check
  MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support
  irqchip: mips-cpu: Introduce IPI IRQ domain support
  irqchip: mips-cpu: Prepare for non-legacy IRQ domains
  irqchip: mips-cpu: Replace magic 0x100 with IE_SW0
  MIPS: Remove CONFIG_ARCH_HAS_ILOG2_U{32,64}
  MIPS: generic: Enable Root FS on NFS in generic_defconfig
  MIPS: mach-rm: Remove recursive include of cpu-feature-overrides.h
  MIPS: Opt into HAVE_COPY_THREAD_TLS
  CPUFREQ: Loongson2: drop set_cpus_allowed_ptr()
  MIPS: uasm: Remove needless ISA abstraction
  MIPS: Remove dead define of ST_OFF
  MIPS: Use common outgoing-CPU-notification code
  MIPS: math-emu: Fix BC1EQZ and BC1NEZ condition handling
  MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters
  ...

Pull nios2 updates from Ley Foon Tan:
 "nios2 fixes/enhancements and adding nios2 R2 support"

* tag 'nios2-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: remove custom early console implementation
  nios2: use generic strncpy_from_user() and strnlen_user()
  nios2: Add CDX support
  nios2: Add BMX support
  nios2: Add NIOS2_ARCH_REVISION to select between R1 and R2
  nios2: implement flush_dcache_mmap_lock/unlock
  nios2: enable earlycon support
  nios2: constify irq_domain_ops
  nios2: remove wrapper header for cmpxchg.h
  nios2: add .gitignore entries for auto-generated files

OSS drivers are left as badly unmaintained, and now we're facing a
problem to clean up the hackish set_fs() usage in their codes.  Since
most of drivers have been covered by ALSA, and the others are dead old
and inactive, let's leave them RIP.

This patch is the first step: disable the build of OSS drivers.
We'll eventually drop the whole codes and clean up later.

Note that sound/oss/dmasound is still kept, since it's a completely
different implementation of OSS, and it doesn't suffer from set_fs()
hack.  Moreover, the build of ALSA is disabled on M68K by some reason,
thus disabling it shall result in a regression.  This one will be
disabled / removed once when we add the support in ALSA side.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a new Kconfig option to enable/disable the extra warnings
from the vblank evade code. For now we'll keep the warning
about an actually missed vblank always enabled as that can have
an actual user visible impact. But if we miss the deadline
othrwise there's no real need to bother the user with that.
We'll want these warnings enabled during development however
so that we can catch regressions.

Based on the reports it looks like this is still very easy
to hit on SKL, so we have more work ahead of us to optimize
the crtiical section further.

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: e1edbd44 ("drm/i915: Complain if we take too long under vblank evasion.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Quite a few patches, but not much code changed:
- Fixes regression from atomic when only the source rect of a plane
changes (ie. xrandr --right-of)
- Fixes another issue where atomic changed behaviour underneath us,
potentially causing laggy cursor position updates
- Fixes for a bunch of races in thermal code, which lead to random
lockups for a lot of users

* 'linux-4.12' of git://github.com/skeggsb/linux:
  drm/nouveau/therm: remove ineffective workarounds for alarm bugs
  drm/nouveau/tmr: avoid processing completed alarms when adding a new one
  drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
  drm/nouveau/tmr: handle races with hw when updating the next alarm time
  drm/nouveau/tmr: ack interrupt before processing alarms
  drm/nouveau/core: fix static checker warning
  drm/nouveau/fb/ram/gf100-: remove 0x10f200 read
  drm/nouveau/kms/nv50: skip core channel cursor update on position-only changes
  drm/nouveau/kms/nv50: fix source-rect-only plane updates
  drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()

Fixes for 4.12.  This is a bit bigger than usual since it's 3 weeks
worth of fixes and most of these changes are for vega10 which is
new for 4.12 and still in a fair amount of flux.  It looks like
you missed my last pull request, so those patches are included here
as well.  Highlights:
- Lots of vega10 fixes
- Fix interruptable wait mixup
- Fan control method fixes
- Misc display fixes for radeon and amdgpu
- Misc bug fixes

* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (132 commits)
  drm/amd/powerplay: refine pwm1_enable callback functions for CI.
  drm/amd/powerplay: refine pwm1_enable callback functions for vi.
  drm/amd/powerplay: refine pwm1_enable callback functions for Vega10.
  drm/amdgpu: refine amdgpu pwm1_enable sysfs interface.
  drm/amdgpu: add amd fan ctrl mode enums.
  drm/amd/powerplay: add more smu message on Vega10.
  drm/amdgpu: fix dependency issue
  drm/amd: fix init order of sched job
  drm/amdgpu: add some additional vega10 pci ids
  drm/amdgpu/soc15: use atomfirmware for setting bios scratch for reset
  drm/amdgpu/atomfirmware: add function to update engine hang status
  drm/radeon: only warn once in radeon_ttm_bo_destroy if va list not empty
  drm/amdgpu: fix mutex list null pointer reference
  drm/amd/powerplay: fix bug sclk/mclk level can't be set on vega10.
  drm/amd/powerplay: Setup sw CTF to allow graceful exit when temperature exceeds maximum.
  drm/amd/powerplay: delete dead code in powerplay.
  drm/amdgpu: Use less generic enum definitions
  drm/amdgpu/gfx9: derive tile pipes from golden settings
  drm/amdgpu/gfx: drop max_gs_waves_per_vgt
  drm/amd/powerplay: disable engine spread spectrum feature on Vega10.
  ...

Merge tag 'drm-misc-next-fixes-2017-05-05' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Core Changes:
- Add quirk for LGD 764 panel to default 10bpc (Mario)

Cc: Mario Kleiner <mario.kleiner.de@gmail.com>

* tag 'drm-misc-next-fixes-2017-05-05' of git://anongit.freedesktop.org/git/drm-misc:
  drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2

These were ineffective due to touching the list without the alarm lock,
but should no longer be required.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

The idea here was to avoid having to "manually" program the HW if there's
a new earliest alarm.  This was lazy and bad, as it leads to loads of fun
races between inter-related callers (ie. therm).

Turns out, it's not so difficult after all.  Go figure ;)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

At least therm/fantog "attempts" to work around this issue, which could
lead to corruption of the pending alarm list.

Fix it properly by not updating the timestamp without the lock held, or
trying to add an already pending alarm to the pending alarm list....
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

If the time to the next alarm is short enough, we could race with HW and
end up with an ~4 second delay until it triggers.

Fix this by checking again after we update HW.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Fixes a race where we can miss an alarm that triggers while we're already
processing previous alarms.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

object->engine cannot be NULL, it's either valid, or an error pointer.

This particular condition shouldn't actually be possible, but just in
case, we'll keep it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This reg has moved on Pascal, and causes a bus fault.

We never use the value anyway, so just remove the read.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The DRM core used to only call prepare_fb/cleanup_fb() when a plane's
framebuffer changed, which achieved the desired effect.

It's apparently now up to the driver to decide on its own.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [4.11+]

This "optimisation" (which was originally meant to skip updating cursor
settings in the core channel on position-only updates) turned out to be
pointless in the final design of the code before it was merged.

Remove it completely, as it breaks other cases.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [4.10+]

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>