- 03 Jul, 2013 18 commits
-
-
Joseph Qi authored
If we use le32_add_cpu to set ocfs2_dinode i_flags, it may lead to the corresponding flag corrupted. So we should change it to bitwise and/or operation. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: shencanquan <shencanquan@huawei.com> Reviewed-by:
Jie Liu <jeff.liu@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
In dlm_request_all_locks, ret is type enum. But o2net_send_message returns a type int value. Then it will never run into the following error branch. So we should change the ret type from enum to int. Signed-off-by:
Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by:
-
Joseph Qi authored
Below 3 functions have already been declared in dlmcommon.h, so we have no need to declare them again in dlmrecovery.c: dlm_complete_recovery_thread dlm_launch_recovery_thread dlm_kick_recovery_thread Signed-off-by:
-
Dan Carpenter authored
The difference between "count" and "len" is that "len" is capped at 4095. Changing it like this makes it match how sysfs_write_file() is implemented. This is a static analysis patch. I haven't found any store_attribute() functions where this change makes a difference. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Andrew Morton authored
spacr64 gcc-3.4.5 (at least) spits this back. Cc: Andrey Smirnov <andrey.smirnov@convergeddevices.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
tasklet_kill() may sleep so call it before taking pch->lock. Fixes following lockup: BUG: scheduling while atomic: cat/2383/0x00000002 Modules linked in: unwind_backtrace+0x0/0xfc __schedule_bug+0x4c/0x58 __schedule+0x690/0x6e0 sys_sched_yield+0x70/0x78 tasklet_kill+0x34/0x8c pl330_free_chan_resources+0x24/0x88 dma_chan_put+0x4c/0x50 [...] BUG: spinlock lockup suspected on CPU#0, swapper/0/0 lock: 0xe52aa04c, .magic: dead4ead, .owner: cat/2383, .owner_cpu: 1 unwind_backtrace+0x0/0xfc do_raw_spin_lock+0x194/0x204 _raw_spin_lock_irqsave+0x20/0x28 pl330_tasklet+0x2c/0x5a8 tasklet_action+0xfc/0x114 __do_softirq+0xe4/0x19c irq_exit+0x98/0x9c handle_IPI+0x124/0x16c gic_handle_irq+0x64/0x68 __irq_svc+0x40/0x70 cpuidle_wrap_enter+0x4c/0xa0 cpuidle_enter_state+0x18/0x68 cpuidle_idle_call+0xac/0xe0 cpu_idle+0xac/0xf0 Signed-off-by:Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Jassi Brar <jassisinghbrar@gmail.com> Cc: Vinod Koul <vinod.koul@linux.intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Chen Gang authored
Need include "asm/uaccess.h" to pass compiling. The related error (with allmodconfig): arch/c6x/mm/init.c: In function `paging_init': arch/c6x/mm/init.c:46:2: error: implicit declaration of function `set_fs' [-Werror=implicit-function-declaration] arch/c6x/mm/init.c:46:9: error: `KERNEL_DS' undeclared (first use in this function) arch/c6x/mm/init.c:46:9: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by:
Chen Gang <gang.chen@asianux.com> Cc: <stable@vger.kernel.org> [3.10.x] Signed-off-by:
-
Andrew Morton authored
Commit f21afc25 ("smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu()") converted on_each_cpu() to a C function. This required inclusion of irqflags.h, which broke ia64 and mn10300 (at least) due to header ordering hell. Switch on_each_cpu() back to a macro to fix this. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64Linus Torvalds authored
Pull ARM64 updates from Catalin Marinas: "Main features: - KVM and Xen ports to AArch64 - Hugetlbfs and transparent huge pages support for arm64 - Applied Micro X-Gene Kconfig entry and dts file - Cache flushing improvements For arm64 huge pages support, there are x86 changes moving part of arch/x86/mm/hugetlbpage.c into mm/hugetlb.c to be re-used by arm64" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (66 commits) arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board arm64: Add defines for APM ARMv8 implementation arm64: Enable APM X-Gene SOC family in the defconfig arm64: Add Kconfig option for APM X-Gene SOC family arm64/Makefile: provide vdso_install target ARM64: mm: THP support. ARM64: mm: Raise MAX_ORDER for 64KB pages and THP. ARM64: mm: HugeTLB support. ARM64: mm: Move PTE_PROT_NONE bit. ARM64: mm: Make PAGE_NONE pages read only and no-execute. ARM64: mm: Restore memblock limit when map_mem finished. mm: thp: Correct the HPAGE_PMD_ORDER check. x86: mm: Remove general hugetlb code from x86. mm: hugetlb: Copy general hugetlb code from x86 to mm. x86: mm: Remove x86 version of huge_pmd_share. mm: hugetlb: Copy huge_pmd_share from x86 to mm. arm64: KVM: document kernel object mappings in HYP arm64: KVM: MAINTAINERS update arm64: KVM: userspace API documentation arm64: KVM: enable initialization of a 32bit vcpu ...
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM updates from Russell King: "This contains the usual updates from other people (listed below) and the usual random muddle of miscellaneous ARM updates which cover some low priority bug fixes and performance improvements. I've started to put the pull request wording into the merge commits, which are: - NoMMU stuff: This includes the following series sent earlier to the list: - nommu-fixes - R7 Support - MPU support I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I were discussing today until we've reached a conclusion/that's had some more review. This is rebased (and re-tested) on your devel-stable branch because otherwise there were going to be conflicts with Uwe's V7M work now that you've merged that. I've included the fix for limiting MPU to CPU_V7. - Huge page support These changes bring both HugeTLB support and Transparent HugePage (THP) support to ARM. Only long descriptors (LPAE) are supported in this series. The code has been tested on an Arndale board (Exynos 5250). - LPAE updates Please pull these miscellaneous LPAE fixes I've been collecting for a while now for 3.11. They've been tested and reviewed by quite a few people, and most of the patches are pretty trivial. -- Will Deacon. - arch_timer cleanups Please pull these arch_timer cleanups I've been holding onto for a while. They're the same as my last posting, but have been rebased to v3.10-rc3. - mpidr linearisation (multiprocessor id register - identifies which CPU number we are in the system) This patch series that implements MPIDR linearization through a simple hashing algorithm and updates current cpu_{suspend}/{resume} code to use the newly created hash structures to retrieve context pointers. It represents a stepping stone for the implementation of power management code on forthcoming multi-cluster ARM systems. It has been tested on TC2 (dual cluster A15xA7 system), iMX6q, OMAP4 and Tegra, with processors hitting low-power states requiring warm-boot resume through the cpu_resume code path" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits) ARM: 7775/1: mm: Remove do_sect_fault from LPAE code ARM: 7777/1: Avoid extra calls to the C compiler ARM: 7774/1: Fix dtb dependency to use order-only prerequisites ARM: 7770/1: remove residual ARMv2 support from decompressor ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator ARM: 7767/1: let the ASID allocator handle suspended animation ARM: 7766/1: versatile: don't mark pen as __INIT ARM: 7765/1: perf: Record the user-mode PC in the call chain. ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork ARM: kernel: implement stack pointer save array through MPIDR hashing ARM: kernel: build MPIDR hash function data structure ARM: mpu: Ensure that MPU depends on CPU_V7 ARM: mpu: protect the vectors page with an MPU region ARM: mpu: Allow enabling of the MPU via kconfig ARM: 7758/1: introduce config HAS_BANDGAP ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting ARM: 7751/1: zImage: don't overwrite ourself with a page table ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace ... -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull second set of VFS changes from Al Viro: "Assorted f_pos race fixes, making do_splice_direct() safe to call with i_mutex on parent, O_TMPFILE support, Jeff's locks.c series, ->d_hash/->d_compare calling conventions changes from Linus, misc stuff all over the place." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) Document ->tmpfile() ext4: ->tmpfile() support vfs: export lseek_execute() to modules lseek_execute() doesn't need an inode passed to it block_dev: switch to fixed_size_llseek() cpqphp_sysfs: switch to fixed_size_llseek() tile-srom: switch to fixed_size_llseek() proc_powerpc: switch to fixed_size_llseek() ubi/cdev: switch to fixed_size_llseek() pci/proc: switch to fixed_size_llseek() isapnp: switch to fixed_size_llseek() lpfc: switch to fixed_size_llseek() locks: give the blocked_hash its own spinlock locks: add a new "lm_owner_key" lock operation locks: turn the blocked_list into a hashtable locks: convert fl_link to a hlist_node locks: avoid taking global lock if possible when waking up blocked waiters locks: protect most of the file_lock handling with i_lock locks: encapsulate the fl_link list handling locks: make "added" in __posix_lock_file a bool ...
-
Al Viro authored
Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
very similar to ext3 counterpart... Signed-off-by: -
Jie Liu authored
For those file systems(btrfs/ext4/ocfs2/tmpfs) that support SEEK_DATA/SEEK_HOLE functions, we end up handling the similar matter in lseek_execute() to update the current file offset to the desired offset if it is valid, ceph also does the simliar things at ceph_llseek(). To reduce the duplications, this patch make lseek_execute() public accessible so that we can call it directly from the underlying file systems. Thanks Dave Chinner for this suggestion. [AV: call it vfs_setpos(), don't bring the removed 'inode' argument back] v2->v1: - Add kernel-doc comments for lseek_execute() - Call lseek_execute() in ceph->llseek() Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cpuset changes from Tejun Heo: "cpuset has always been rather odd about its configurations - a cgroup right after creation didn't allow any task executions before configuration, changing configuration in the parent modifies the descendants irreversibly and so on. These behaviors are inherently nasty and almost hostile against sharing the hierarchy with other controllers making it very difficult to use in unified hierarchy. Li is currently in the process of updating the behaviors for __DEVEL__sane_behavior which is the bulk of changes in this pull request. It isn't complete yet and the behaviors will change further but all changes are gated behind sane_behavior. In the process, the rather hairy work-item punting which was used to work around the limitations of cgroup descendant iterator was simplified." * 'for-3.11-cpuset' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: rename @cont to @cgrp cpuset: fix to migrate mm correctly in a corner case cpuset: allow to move tasks to empty cpusets cpuset: allow to keep tasks in empty cpusets cpuset: introduce effective_{cpumask|nodemask}_cpuset() cpuset: record old_mems_allowed in struct cpuset cpuset: remove async hotplug propagation work cpuset: let hotplug propagation work wait for task attaching cpuset: re-structure update_cpumask() a bit cpuset: remove cpuset_test_cpumask() cpuset: remove unnecessary variable in cpuset_attach() cpuset: cleanup guarantee_online_{cpus|mems}() cpuset: remove redundant check in cpuset_cpus_allowed_fallback()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup changes from Tejun Heo: "This pull request contains the following changes. - cgroup_subsys_state (css) reference counting has been converted to percpu-ref. css is what each resource controller embeds into its own control structure and perform reference count against. It may be used in hot paths of various subsystems and is similar to module refcnt in that aspect. For example, block-cgroup's css refcnting was showing up a lot in Mikulaus's device-mapper scalability work and this should alleviate it. - cgroup subtree iterator has been updated so that RCU read lock can be released after grabbing reference. This allows simplifying its users which requires blocking which used to build iteration list under RCU read lock and then traverse it outside. This pull request contains simplification of cgroup core and device-cgroup. A separate pull request will update cpuset. - Fixes for various bugs including corner race conditions and RCU usage bugs. - A lot of cleanups and some prepartory work for the planned unified hierarchy support." * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (48 commits) cgroup: CGRP_ROOT_SUBSYS_BOUND should also be ignored when mounting an existing hierarchy cgroup: CGRP_ROOT_SUBSYS_BOUND should be ignored when comparing mount options cgroup: fix deadlock on cgroup_mutex via drop_parsed_module_refcounts() cgroup: always use RCU accessors for protected accesses cgroup: fix RCU accesses around task->cgroups cgroup: fix RCU accesses to task->cgroups cgroup: grab cgroup_mutex in drop_parsed_module_refcounts() cgroup: fix cgroupfs_root early destruction path cgroup: reserve ID 0 for dummy_root and 1 for unified hierarchy cgroup: implement for_each_[builtin_]subsys() cgroup: move init_css_set initialization inside cgroup_mutex cgroup: s/for_each_subsys()/for_each_root_subsys()/ cgroup: clean up find_css_set() and friends cgroup: remove cgroup->actual_subsys_mask cgroup: prefix global variables with "cgroup_" cgroup: convert CFTYPE_* flags to enums cgroup: rename cont to cgrp cgroup: clean up cgroup_serial_nr_cursor cgroup: convert cgroup_cft_commit() to use cgroup_for_each_descendant_pre() cgroup: make serial_nr_cursor available throughout cgroup.c ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue changes from Tejun Heo: "Surprisingly, Lai and I didn't break too many things implementing custom pools and stuff last time around and there aren't any follow-up changes necessary at this point. The only change in this pull request is Viresh's patches to make some per-cpu workqueues to behave as unbound workqueues dependent on a boot param whose default can be configured via a config option. This leads to higher processing overhead / lower bandwidth as more work items are bounced across CPUs; however, it can lead to noticeable powersave in certain configurations - ~10% w/ idlish constant workload on a big.LITTLE configuration according to Viresh. This is because per-cpu workqueues interfere with how the scheduler perceives whether or not each CPU is idle by forcing pinned tasks on them, which makes the scheduler's power-aware scheduling decisions less effective. Its effectiveness is likely less pronounced on homogenous configurations and this type of optimization can probably be made automatic; however, the changes are pretty minimal and the affected workqueues are clearly marked, so it's an easy gain for some configurations for the time being with pretty unintrusive changes." * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: fbcon: queue work on power efficient wq block: queue work on power efficient wq PHYLIB: queue work on system_power_efficient_wq workqueue: Add system wide power_efficient workqueues workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
Pull per-cpu changes from Tejun Heo: "This pull request contains Kent's per-cpu reference counter. It has gone through several iterations since the last time and the dynamic allocation is gone. The usual usage is relatively straight-forward although async kill confirm interface, which is not used int most cases, is somewhat icky. There also are some interface concerns - e.g. I'm not sure about passing in @relesae callback during init as that becomes funny when we later implement synchronous kill_and_drain - but nothing too serious and it's quite useable now. cgroup_subsys_state refcnting has already been converted and we should convert module refcnt (Kent?)" * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu-refcount: use RCU-sched insted of normal RCU percpu-refcount: implement percpu_tryget() along with percpu_ref_kill_and_confirm() percpu-refcount: implement percpu_ref_cancel_init() percpu-refcount: add __must_check to percpu_ref_init() and don't use ACCESS_ONCE() in percpu_ref_kill_rcu() percpu-refcount: cosmetic updates percpu-refcount: consistently use plain (non-sched) RCU percpu-refcount: Don't use silly cmpxchg() percpu: implement generic percpu refcounting
-
- 02 Jul, 2013 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 UV update from Ingo Molnar: "There's a single commit in this tree, which adds support for a new SGI UV GRU (Global Reference Unit - fast NUMA messaging ASIC) hardware feature to scale up and beyond: an optional distributed mode that will allow per-node address mapping of local GRU space, as opposed to mapping all GRU hardware to the same contiguous high space" * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/UV: Add GRU distributed mode mappings
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 tracing updates from Ingo Molnar: "This tree adds IRQ vector tracepoints that are named after the handler and which output the vector #, based on a zero-overhead approach that relies on changing the IDT entries, by Seiji Aguchi. The new tracepoints look like this: # perf list | grep -i irq_vector irq_vectors:local_timer_entry [Tracepoint event] irq_vectors:local_timer_exit [Tracepoint event] irq_vectors:reschedule_entry [Tracepoint event] irq_vectors:reschedule_exit [Tracepoint event] irq_vectors:spurious_apic_entry [Tracepoint event] irq_vectors:spurious_apic_exit [Tracepoint event] irq_vectors:error_apic_entry [Tracepoint event] irq_vectors:error_apic_exit [Tracepoint event] [...]" * 'x86-tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tracing: Add config option checking to the definitions of mce handlers trace,x86: Do not call local_irq_save() in load_current_idt() trace,x86: Move creation of irq tracepoints from apic.c to irq.c x86, trace: Add irq vector tracepoints x86: Rename variables for debugging x86, trace: Introduce entering/exiting_irq() tracing: Add DEFINE_EVENT_FN() macro -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 RAS update from Ingo Molnar: "The changes in this tree are: - ACPI APEI (ACPI Platform Error Interface) improvements, by Chen Gong - misc MCE fixes/cleanups" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Update MCE severity condition check mce: acpi/apei: Add comments to clarify usage of the various bitfields in the MCA subsystem ACPI/APEI: Update einj documentation for param1/param2 ACPI/APEI: Add parameter check before error injection ACPI, APEI, EINJ: Fix error return code in einj_init() x86, mce: Fix "braodcast" typo -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 platform updates from Ingo Molnar: "Two changes: - A Kconfig dependency fix/cleanup - Introduce the 'make kvmconfig' KVM configuration helper utility that turns the current .config into a KVM-bootable config. Useful for debugging specific native kernel configs that have no KVM config options enabled on VM setups." * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform: Make X86_GOLDFISH depend on X86_EXTENDED_PLATFORM x86/platform: Add kvmconfig to the phony targets x86, platform, kvm, kconfig: Turn existing .config's into KVM-capable configs -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm changes from Ingo Molnar: "Misc improvements: - Fix /proc/mtrr reporting - Fix ioremap printout - Remove the unused pvclock fixmap entry on 32-bit - misc cleanups" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioremap: Correct function name output x86: Fix /proc/mtrr with base/size more than 44bits ix86: Don't waste fixmap entries x86/mm: Drop unneeded include <asm/*pgtable, page*_types.h> x86_64: Correct phys_addr in cleanup_highmap comment
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode loading update from Ingo Molnar: "Two main changes that improve microcode loading on AMD CPUs: - Add support for all-in-one binary microcode files that concatenate the microcode images of multiple processor families, by Jacob Shin - Add early microcode loading (embedded in the initrd) support, also by Jacob Shin" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, amd: Another early loading fixup x86, microcode, amd: Allow multiple families' bin files appended together x86, microcode, amd: Make find_ucode_in_initrd() __init x86, microcode, amd: Fix warnings and errors on with CONFIG_MICROCODE=m x86, microcode, amd: Early microcode patch loading support for AMD x86, microcode, amd: Refactor functions to prepare for early loading x86, microcode: Vendor abstract out save_microcode_in_initrd() x86, microcode, intel: Correct typo in printk -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 FPU changes from Ingo Molnar: "There are two bigger changes in this tree: - Add an [early-use-]safe static_cpu_has() variant and other robustness improvements, including the new X86_DEBUG_STATIC_CPU_HAS configurable debugging facility, motivated by recent obscure FPU code bugs, by Borislav Petkov - Reimplement FPU detection code in C and drop the old asm code, by Peter Anvin." * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, fpu: Use static_cpu_has_safe before alternatives x86: Add a static_cpu_has_safe variant x86: Sanity-check static_cpu_has usage x86, cpu: Add a synthetic, always true, cpu feature x86: Get rid of ->hard_math and all the FPU asm fu -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 EFI changes from Ingo Molnar: "Two fixes that should in principle increase robustness of our interaction with the EFI firmware, and a cleanup" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: retry ExitBootServices() on failure efi: Convert runtime services function ptrs UEFI: Don't pass boot services regions to SetVirtualAddressMap()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 debug update from Ingo Molnar: "Misc debuggability improvements: - Optimize the x86 CPU register printout a bit - Expose the tboot TXT log via debugfs - Small do_debug() cleanup" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tboot: Provide debugfs interfaces to access TXT log x86: Remove weird PTR_ERR() in do_debug x86/debug: Only print out DR registers if they are not power-on defaults
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cpu updates from Ingo Molnar: "Two changes: - Extend 32-bit double fault debugging aid to 64-bit - Fix a build warning" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel/cacheinfo: Shut up last long-standing warning x86: Extend #DF debugging aid to 64-bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cleanups from Ingo Molnar: "Misc x86 cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, reloc: Use xorl instead of xorq in relocate_kernel_64.S x86, cleanups: Remove extra tab in __flush_tlb_one() x86/mce: Remove check for CONFIG_X86_MCE_P4THERMAL
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot build fix from Ingo Molnar: "Small fixlet for the build process" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Close opened file descriptor
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull asm/x86 changes from Ingo Molnar: "Misc changes, with a bigger processor-flags cleanup/reorganization by Peter Anvin" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, asm, cleanup: Replace open-coded control register values with symbolic x86, processor-flags: Fix the datatypes and add bit number defines x86: Rename X86_CR4_RDWRGSFS to X86_CR4_FSGSBASE x86, flags: Rename X86_EFLAGS_BIT1 to X86_EFLAGS_FIXED linux/const.h: Add _BITUL() and _BITULL() x86/vdso: Convert use of typedef ctl_table to struct ctl_table x86: __force_order doesn't need to be an actual variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull voluntary preemption fixes from Ingo Molnar: "This tree contains a speedup which is achieved through better might_sleep()/might_fault() preemption point annotations for uaccess functions, by Michael S Tsirkin: 1. The only reason uaccess routines might sleep is if they fault. Make this explicit for all architectures. 2. A voluntary preemption point in uaccess functions means compiler can't inline them efficiently, this breaks assumptions that they are very fast and small that e.g. net code seems to make. Remove this preemption point so behaviour matches with what callers assume. 3. Accesses (e.g through socket ops) to kernel memory with KERNEL_DS like net/sunrpc does will never sleep. Remove an unconditinal might_sleep() in the might_fault() inline in kernel.h (used when PROVE_LOCKING is not set). 4. Accesses with pagefault_disable() return EFAULT but won't cause caller to sleep. Check for that and thus avoid might_sleep() when PROVE_LOCKING is set. These changes offer a nice speedup for CONFIG_PREEMPT_VOLUNTARY=y kernels, here's a network bandwidth measurement between a virtual machine and the host: before: incoming: 7122.77 Mb/s outgoing: 8480.37 Mb/s after: incoming: 8619.24 Mb/s [ +21.0% ] outgoing: 9455.42 Mb/s [ +11.5% ] I kept these changes in a separate tree, separate from scheduler changes, because it's a mixed MM and scheduler topic" * 'sched-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mm, sched: Allow uaccess in atomic with pagefault_disable() mm, sched: Drop voluntary schedule from might_fault() x86: uaccess s/might_sleep/might_fault/ tile: uaccess s/might_sleep/might_fault/ powerpc: uaccess s/might_sleep/might_fault/ mn10300: uaccess s/might_sleep/might_fault/ microblaze: uaccess s/might_sleep/might_fault/ m32r: uaccess s/might_sleep/might_fault/ frv: uaccess s/might_sleep/might_fault/ arm64: uaccess s/might_sleep/might_fault/ asm-generic: uaccess s/might_sleep/might_fault/ -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler updates from Ingo Molnar: "The main changes: - load-calculation cleanups and improvements, by Alex Shi - various nohz related tidying up of statisics, by Frederic Weisbecker - factor out /proc functions to kernel/sched/proc.c, by Paul Gortmaker - simplify the RT policy scheduler, by Kirill Tkhai - various fixes and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) sched/debug: Remove CONFIG_FAIR_GROUP_SCHED mask sched/debug: Fix formatting of /proc/<PID>/sched sched: Fix typo in struct sched_avg member description sched/fair: Fix typo describing flags in enqueue_entity sched/debug: Add load-tracking statistics to task sched: Change get_rq_runnable_load() to static and inline sched/tg: Remove tg.load_weight sched/cfs_rq: Change atomic64_t removed_load to atomic_long_t sched/tg: Use 'unsigned long' for load variable in task group sched: Change cfs_rq load avg to unsigned long sched: Consider runnable load average in move_tasks() sched: Compute runnable load avg in cpu_load and cpu_avg_load_per_task sched: Update cpu load after task_tick sched: Fix sleep time double accounting in enqueue entity sched: Set an initial value of runnable avg for new forked task sched: Move a few runnable tg variables into CONFIG_SMP Revert "sched: Introduce temporary FAIR_GROUP_SCHED dependency for load-tracking" sched: Don't mix use of typedef ctl_table and struct ctl_table sched: Remove WARN_ON(!sd) from init_sched_groups_power() sched: Fix memory leakage in build_sched_groups() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates from Ingo Molnar: "Kernel improvements: - watchdog driver improvements by Li Zefan - Power7 CPI stack events related improvements by Sukadev Bhattiprolu - event multiplexing via hrtimers and other improvements by Stephane Eranian - kernel stack use optimization by Andrew Hunter - AMD IOMMU uncore PMU support by Suravee Suthikulpanit - NMI handling rate-limits by Dave Hansen - various hw_breakpoint fixes by Oleg Nesterov - hw_breakpoint overflow period sampling and related signal handling fixes by Jiri Olsa - Intel Haswell PMU support by Andi Kleen Tooling improvements: - Reset SIGTERM handler in workload child process, fix from David Ahern. - Makefile reorganization, prep work for Kconfig patches, from Jiri Olsa. - Add automated make test suite, from Jiri Olsa. - Add --percent-limit option to 'top' and 'report', from Namhyung Kim. - Sorting improvements, from Namhyung Kim. - Expand definition of sysfs format attribute, from Michael Ellerman. Tooling fixes: - 'perf tests' fixes from Jiri Olsa. - Make Power7 CPI stack events available in sysfs, from Sukadev Bhattiprolu. - Handle death by SIGTERM in 'perf record', fix from David Ahern. - Fix printing of perf_event_paranoid message, from David Ahern. - Handle realloc failures in 'perf kvm', from David Ahern. - Fix divide by 0 in variance, from David Ahern. - Save parent pid in thread struct, from David Ahern. - Handle JITed code in shared memory, from Andi Kleen. - Fixes for 'perf diff', from Jiri Olsa. - Remove some unused struct members, from Jiri Olsa. - Add missing liblk.a dependency for python/perf.so, fix from Jiri Olsa. - Respect CROSS_COMPILE in liblk.a, from Rabin Vincent. - No need to do locking when adding hists in perf report, only 'top' needs that, from Namhyung Kim. - Fix alignment of symbol column in in the hists browser (top, report) when -v is given, from NAmhyung Kim. - Fix 'perf top' -E option behavior, from Namhyung Kim. - Fix bug in isupper() and islower(), from Sukadev Bhattiprolu. - Fix compile errors in bp_signal 'perf test', from Sukadev Bhattiprolu. ... and more things" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (102 commits) perf/x86: Disable PEBS-LL in intel_pmu_pebs_disable() perf/x86: Fix shared register mutual exclusion enforcement perf/x86/intel: Support full width counting x86: Add NMI duration tracepoints perf: Drop sample rate when sampling is too slow x86: Warn when NMI handlers take large amounts of time hw_breakpoint: Introduce "struct bp_cpuinfo" hw_breakpoint: Simplify *register_wide_hw_breakpoint() hw_breakpoint: Introduce cpumask_of_bp() hw_breakpoint: Simplify the "weight" usage in toggle_bp_slot() paths hw_breakpoint: Simplify list/idx mess in toggle_bp_slot() paths perf/x86/intel: Add mem-loads/stores support for Haswell perf/x86/intel: Support Haswell/v4 LBR format perf/x86/intel: Move NMI clearing to end of PMI handler perf/x86/intel: Add Haswell PEBS support perf/x86/intel: Add simple Haswell PMU support perf/x86/intel: Add Haswell PEBS record support perf/x86/intel: Fix sparse warning perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation perf/x86/amd: Add IOMMU Performance Counter resource management ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core irq changes from Ingo Molnar: "The main changes: - generic-irqchip driver additions, cleanups and fixes - 3 new irqchip drivers: ARMv7-M NVIC, TB10x and Marvell Orion SoCs - irq_get_trigger_type() simplification and cross-arch cleanup - various cleanups, simplifications - documentation updates" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) softirq: Use _RET_IP_ genirq: Add the generic chip to the genirq docbook genirq: generic-chip: Export some irq_gc_ functions genirq: Fix can_request_irq() for IRQs without an action irqchip: exynos-combiner: Staticize combiner_init irqchip: Add support for ARMv7-M NVIC irqchip: Add TB10x interrupt controller driver irqdomain: Use irq_get_trigger_type() to get IRQ flags MIPS: octeon: Use irq_get_trigger_type() to get IRQ flags arm: orion: Use irq_get_trigger_type() to get IRQ flags mfd: stmpe: use irq_get_trigger_type() to get IRQ flags mfd: twl4030-irq: Use irq_get_trigger_type() to get IRQ flags gpio: mvebu: Use irq_get_trigger_type() to get IRQ flags genirq: Add irq_get_trigger_type() to get IRQ flags genirq: Irqchip: document gcflags arg of irq_alloc_domain_generic_chips genirq: Set irq thread to RT priority on creation irqchip: Add support for Marvell Orion SoCs genirq: Add kerneldoc for irq_disable. genirq: irqchip: Add mask to block out invalid irqs genirq: Generic chip: Add linear irq domain support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU updates from Ingo Molnar: "The major changes: - Simplify RCU's grace-period and callback processing based on the new numbering for callbacks. - Removal of TINY_PREEMPT_RCU in favor of TREE_PREEMPT_RCU for single-CPU low-latency systems. - SRCU-related changes and fixes. - Miscellaneous fixes, including converting a few remaining printk() calls to pr_*(). - Documentation updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) rcu: Shrink TINY_RCU by reworking CPU-stall ifdefs rcu: Shrink TINY_RCU by moving exit_rcu() rcu: Remove TINY_PREEMPT_RCU tracing documentation rcu: Consolidate rcutiny_plugin.h ifdefs rcu: Remove rcu_preempt_note_context_switch() rcu: Remove the CONFIG_TINY_RCU ifdefs in rcutiny.h rcu: Remove check_cpu_stall_preempt() rcu: Simplify RCU_TINY RCU callback invocation rcu: Remove rcu_preempt_process_callbacks() rcu: Remove rcu_preempt_remove_callbacks() rcu: Remove rcu_preempt_check_callbacks() rcu: Remove show_tiny_preempt_stats() rcu: Remove TINY_PREEMPT_RCU powerpc,kvm: fix imbalance srcu_read_[un]lock() rcu: Remove srcu_read_lock_raw() and srcu_read_unlock_raw(). rcu: Apply Dave Jones's NOCB Kconfig help feedback rcu: Merge adjacent identical ifdefs rcu: Drive quiescent-state-forcing delay from HZ rcu: Remove "Experimental" flags kthread: Add kworker kthreads to OS-jitter documentation ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull WW mutex support from Ingo Molnar: "This tree adds support for wound/wait style locks, which the graphics guys would like to make use of in the TTM graphics subsystem. Wound/wait mutexes are used when other multiple lock acquisitions of a similar type can be done in an arbitrary order. The deadlock handling used here is called wait/wound in the RDBMS literature: The older tasks waits until it can acquire the contended lock. The younger tasks needs to back off and drop all the locks it is currently holding, ie the younger task is wounded. See this LWN.net description of W/W mutexes: https://lwn.net/Articles/548909/ The comments there outline specific usecases for this facility (which have already been implemented for the DRM tree). Also see Documentation/ww-mutex-design.txt for more details" * 'core-mutexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking-selftests: Handle unexpected failures more strictly mutex: Add more w/w tests to test EDEADLK path handling mutex: Add more tests to lib/locking-selftest.c mutex: Add w/w tests to lib/locking-selftest.c mutex: Add w/w mutex slowpath debugging mutex: Add support for wound/wait style locks arch: Make __mutex_fastpath_lock_retval return whether fastpath succeeded or not -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking changes from Ingo Molnar: "Four miscellanous standalone fixes for futexes, rtmutexes and Kconfig.locks." * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Use freezable blocking call futex: Take hugepages into account when generating futex_key rtmutex: Document rt_mutex_adjust_prio_chain() locking: Fix copy/paste errors of "ARCH_INLINE_*_UNLOCK_BH"
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC late changes from Arnd Bergmann: "These are changes that arrived a little late before the merge window or that have multiple dependencies on previous branches so they did not fit into one of the earlier ones. There are 10 branches merged here, a total of 39 non-merge commits. Contents are a mixed bag for the above reasons: * Two new SoC platforms: ST microelectronics stixxxx and the TI 'Nspire' graphing calculator. These should have been in the 'soc' branch but were a little late * Support for the Exynos 5420 variant in mach-exynos, which is based on the other exynos branches to avoid conflicts. * Various small changes for sh-mobile, ux500 and davinci * Common clk support for MSM" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: bail out on alien cpus ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins serial: sh-sci: Initialise variables before access in sci_set_termios() ARM: stih41x: Add B2020 board support ARM: stih41x: Add B2000 board support ARM: sti: Add DEBUG_LL console support ARM: sti: Add STiH416 SOC support ARM: sti: Add STiH415 SOC support ARM: msm: Migrate to common clock framework ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Remove clock-7x30.h include file ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove custom clk_set_flags() API msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() msm: iommu: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare usb: otg: msm: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors msm_serial: Convert to clk_prepare/unprepare ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ...
-
