- 13 Nov, 2018 19 commits
-
-
Ming Lei authored
commit 1adfc5e4 upstream. Obviously the created discard bio has to be aligned with logical block size. This patch introduces the helper of bio_allowed_max_sectors() for this purpose. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: 744889b7 ("block: don't deal with discard limit in blkdev_issue_discard()") Fixes: a22c4d7e ("block: re-add discard_granularity and alignment checks") Reported-by:
Rui Salvaterra <rsalvaterra@gmail.com> Tested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Axboe authored
commit 52990a5f upstream. We're only setting up the bounce bio sets if we happen to need bouncing for regular HIGHMEM, not if we only need it for ISA devices. Protect the ISA bounce setup with a mutex, since it's being invoked from driver init functions and can thus be called in parallel. Cc: stable@vger.kernel.org Reported-by:
Ondrej Zary <linux@rainbow-software.org> Tested-by:
-
Hou Tao authored
commit 92e2921f upstream. When an invalid mount option is passed to jffs2, jffs2_parse_options() will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will be used (use-after-free) and freeed (double-free) in jffs2_kill_sb(). Fix it by removing the buggy invocation of kfree() when getting invalid mount options. Fixes: 92abc475 ("jffs2: implement mount option parsing and compression overriding") Cc: stable@kernel.org Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Dmitry Bazhenov authored
commit e7c6a556 upstream. Devices with compatible="pmbus" field have zero initial page count, and pmbus_clear_faults() being called before the page count auto- detection does not actually clear faults because it depends on the page count. Non-cleared faults in its turn may fail the subsequent page count auto-detection. This patch fixes this problem by calling pmbus_clear_fault_page() for currently set page and calling pmbus_clear_faults() after the page count was detected. Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Bazhenov <bazhenov.dn@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Tang Junhui authored
commit 2d6cb6ed upstream. refill->end record the last key of writeback, for example, at the first time, keys (1,128K) to (1,1024K) are flush to the backend device, but the end key (1,1024K) is not included, since the bellow code: if (bkey_cmp(k, refill->end) >= 0) { ret = MAP_DONE; goto out; } And in the next time when we refill writeback keybuf again, we searched key start from (1,1024K), and got a key bigger than it, so the key (1,1024K) missed. This patch modify the above code, and let the end key to be included to the writeback key buffer. Signed-off-by:
Tang Junhui <tang.junhui.linux@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Tang Junhui authored
commit 2e17a262 upstream. When bcache device is clean, dirty keys may still exist after journal replay, so we need to count these dirty keys even device in clean status, otherwise after writeback, the amount of dirty data would be incorrect. Signed-off-by:
-
Tang Junhui authored
commit dd0c9179 upstream. When doing ioctl in flash device, it will call ioctl_dev() in super.c, then we should not to get cached device since flash only device has no backend device. This patch just move the jugement dc->io_disable to cached_dev_ioctl() to make ioctl in flash device correctly. Fixes: 0f0709e6 ("bcache: stop bcache device when backing device is offline") Signed-off-by:
-
Tang Junhui authored
commit 502b2915 upstream. Missed reading IOs are identified by s->cache_missed, not the s->cache_miss, so in trace_bcache_read() using trace_bcache_read to identify whether the IO is missed or not. Signed-off-by:
-
Rafał Miłecki authored
commit 0976eda7 upstream. During implementation of the new API bcm_qspi_bspi_set_flex_mode() has been modified breaking calculation of address length. An unnecessary multiplication was added breaking flash reads. Fixes: 5f195ee7 ("spi: bcm-qspi: Implement the spi_mem interface") Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Rafał Miłecki authored
commit 940ec770 upstream. Fixing/optimizing bcm_qspi_bspi_read() performance introduced two changes: 1) It added a loop to read all requested data using multiple BSPI ops. 2) It bumped max size of a single BSPI block request from 256 to 512 B. The later change resulted in occasional BSPI timeouts causing a regression. For some unknown reason hardware doesn't always handle reads as expected when using 512 B chunks. In such cases it may happen that BSPI returns amount of requested bytes without the last 1-3 ones. It provides the remaining bytes later but doesn't raise an interrupt until another LR start. Switching back to 256 B reads fixes that problem and regression. Fixes: 345309fa ("spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance") Signed-off-by:
-
Chuanhua Han authored
commit e757996c upstream. We need that to adjust the len of the 2nd transfer (called data in spi-mem) if it's too long to fit in a SPI message or SPI transfer. Fixes: c36ff266 ("spi: Extend the core to ease integration of SPI memory controllers") Cc: <stable@vger.kernel.org> Signed-off-by:
Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by:
-
Ahmad Fatoum authored
commit 00041227 upstream. fsl_qspi_get_seqid() may return -EINVAL, but fsl_qspi_init_ahb_read() doesn't check for error codes with the result that -EINVAL could find itself signalled over the bus. In conjunction with the LS1046A SoC's A-009283 errata ("Illegal accesses to SPI flash memory can result in a system hang") this illegal access to SPI flash memory results in a system hang if userspace attempts reading later on. Avoid this by always checking fsl_qspi_get_seqid()'s return value and bail out otherwise. Fixes: e46ecda7 ("mtd: spi-nor: Add Freescale QuadSPI driver") Cc: stable@vger.kernel.org Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
-
Mika Westerberg authored
commit 42460c31 upstream. Intel Ice Lake exposes the SPI serial flash controller as a PCI device in the same way than Intel Denverton. Add Ice Lake SPI serial flash PCI ID to the driver list of supported devices. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Marek Vasut <marek.vasut@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Liu Xiang authored
commit 41fe2429 upstream. If the size of spi-nor flash is larger than 16MB, the read_opcode is set to SPINOR_OP_READ_1_1_4_4B, and fsl_qspi_get_seqid() will return -EINVAL when cmd is SPINOR_OP_READ_1_1_4_4B. This can cause read operation fail. Fixes: e46ecda7 ("mtd: spi-nor: Add Freescale QuadSPI driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit 6c925b33 upstream. We should only iomap the area of the chip that is memory mapped. Otherwise we could be mapping devices beyond the memory space or that belong to other devices. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Fixes: ebd71e3a ("mtd: maps: gpio-addr-flash: fix warnings and make more portable") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Miquel Raynal authored
commit 53c83b59 upstream. With the current implementation, the complete() in the IRQ handler is supposed to be called only if the register status has one or the other RDY bit set. Other events might trigger an interrupt as well if enabled, but should not end-up with a complete() call. For this purpose, the code was checking if the other bits were set, in this case complete() was not called. This is wrong as two events might happen in a very tight time-frame and if the NDSR status read reports two bits set (eg. RDY(0) and RDDREQ) at the same time, complete() was not called. This logic would lead to timeouts in marvell_nfc_wait_op() and has been observed on PXA boards (NFCv1) in the Hamming write path. Fixes: 02f26ecf ("mtd: nand: add reworked Marvell NAND controller driver") Cc: stable@vger.kernel.org Reported-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Tested-by:
-
Linus Walleij authored
[ Upstream commit 833eacc7 ] The MXS driver was calling back into the GPIO API from its irqchip. This is not very elegant, as we are a driver, let's just shortcut back into the gpio_chip .get() function instead. This is a tricky case since the .get() callback is not in this file, instead assigned by bgpio_init(). Calling the function direcly in the gpio_chip is however the lesser evil. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Huacai Chen authored
[ Upstream commit c61c7def ] Commit ea7e0480 ("MIPS: VDSO: Always map near top of user memory") set VDSO_RANDOMIZE_SIZE to 256MB for 64bit kernel. But take a look at arch/mips/mm/mmap.c we can see that MIN_GAP is 128MB, which means the mmap_base may be at (user_address_top - 128MB). This make the stack be surrounded by mmaped areas, then stack expanding fails and causes a segmentation fault. Therefore, VDSO_RANDOMIZE_SIZE should be less than MIN_GAP and this patch reduce it to 64MB. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: ea7e0480 ("MIPS: VDSO: Always map near top of user memory") Patchwork: https://patchwork.linux-mips.org/patch/20910/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhuacai@gmail.com> Cc: stable@vger.kernel.org # 4.19 Signed-off-by:
-
Daniel Borkmann authored
commit 0962590e upstream. ALU operations on pointers such as scalar_reg += map_value_ptr are handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr and range in the register state share a union, so transferring state through dst_reg->range = ptr_reg->range is just buggy as any new map_ptr in the dst_reg is then truncated (or null) for subsequent checks. Fix this by adding a raw member and use it for copying state over to dst_reg. Fixes: f1174f77 ("bpf/verifier: rework value tracking") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Edward Cree <ecree@solarflare.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
- 04 Nov, 2018 21 commits
-
-
Greg Kroah-Hartman authored
-
Nikolay Aleksandrov authored
commit 0fe5119e upstream. Recently a check was added which prevents marking of routers with zero source address, but for IPv6 that cannot happen as the relevant RFCs actually forbid such packets: RFC 2710 (MLDv1): "To be valid, the Query message MUST come from a link-local IPv6 Source Address, be at least 24 octets long, and have a correct MLD checksum." Same goes for RFC 3810. And also it can be seen as a requirement in ipv6_mc_check_mld_query() which is used by the bridge to validate the message before processing it. Thus any queries with :: source address won't be processed anyway. So just remove the check for zero IPv6 source address from the query processing function. Fixes: 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 1f2b5b8e ] Fixes: 8b30ca73 ("sparc: Add all necessary direct socket system calls.") Reported-by:
Joseph Myers <joseph@codesourcery.com> Signed-off-by:
-
David Miller authored
[ Upstream commit 5b4fc388 ] Right now if we get a corrupted user stack frame we do a do_exit(SIGILL) which is not helpful. If under a debugger, this behavior causes the inferior process to exit. So the register and other state cannot be examined at the time of the event. Instead, conditionally log a rate limited kernel log message and then force a SIGSEGV. With bits and ideas borrowed (as usual) from powerpc. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 2b4792ea ] Some drivers reference it via node_distance(), for example the NVME host driver core. ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 Signed-off-by:
-
Xin Long authored
[ Upstream commit 71335836 ] When getting pr_assocstatus and pr_streamstatus by sctp_getsockopt, it doesn't correctly process the case when policy is set with SCTP_PR_SCTP_ALL | SCTP_PR_SCTP_MASK. It even causes a slab-out-of-bounds in sctp_getsockopt_pr_streamstatus(). This patch fixes it by return -EINVAL for this case. Fixes: 0ac1077e ("sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL") Reported-by: syzbot+5da0d0a72a9e7d791748@syzkaller.appspotmail.com Suggested-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit 5ef79151 ] The mentioned commit needs to be reverted because we cannot pass string allocated on stack to request_irq(). This function stores uses this pointer for later use (e.g. /proc/interrupts) so we need to keep this string persistently. Fixes: d6d9704a ("be2net: remove desc field from be_eq_obj") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 649f0837 ] It was reported that WoL from S5 is broken (WoL from S3 works) and the analysis showed that during system shutdown the network interface was brought down already when the actual kernel shutdown started. Therefore netif_running() returned false and as a consequence the PHY was suspended. Obviously WoL wasn't working then. To fix this the original patch needs to be effectively reverted. A side effect is that when normally bringing down the interface and WoL is enabled the PHY will remain powered on (like it was before the original patch). Fixes: fe87bef0 ("r8169: don't check WoL when powering down PHY and interface is down") Reported-by:
Neil MacLeod <neil@nmacleod.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commti ece23711 ] Just like with normal GRO processing, we have to initialize skb->next to NULL when we unlink overflow packets from the GRO hash lists. Fixes: d4546c25 ("net: Convert GRO SKB handling to list_head.") Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by:
-
Cong Wang authored
[ Upstream commit 7de414a9 ] Most callers of pskb_trim_rcsum() simply drop the skb when it fails, however, ip_check_defrag() still continues to pass the skb up to stack. This is suspicious. In ip_check_defrag(), after we learn the skb is an IP fragment, passing the skb to callers makes no sense, because callers expect fragments are defrag'ed on success. So, dropping the skb when we can't defrag it is reasonable. Note, prior to commit 88078d98, this is not a big problem as checksum will be fixed up anyway. After it, the checksum is not correct on failure. Found this during code review. Fixes: 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Shalom Toledo authored
[ Upstream commit a22712a9 ] After a failed reload, the driver is still registered to devlink, its devlink instance is still allocated and the 'reload_fail' flag is set. Then, in the next reload try, the driver's allocated devlink instance will be freed without unregistering from devlink and its components (e.g, resources). This scenario can cause a use-after-free if the user tries to execute command via devlink user-space tool. Fix by not freeing the devlink instance during reload (failed or not). Fixes: 24cc68ad ("mlxsw: core: Add support for reload") Signed-off-by:
Shalom Toledo <shalomt@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Petr Machata authored
[ Upstream commit ad0b9d94 ] Demands to remove FDB entries should be honored even if the FDB entry in question was originally learned, and not added by the user. Therefore ignore the added_by_user datum for SWITCHDEV_FDB_DEL_TO_DEVICE. Fixes: 816a3bed ("switchdev: Add fdb.added_by_user to switchdev notifications") Signed-off-by:
Petr Machata <petrm@mellanox.com> Suggested-by:
-
Karsten Graul authored
[ Upstream commit fb692ec4 ] The pointer to the link group is unset in the smc connection structure right before the call to smc_buf_unuse. Provide the lgr pointer to smc_buf_unuse explicitly. And move the call to smc_lgr_schedule_free_work to the end of smc_conn_free. Fixes: a6920d1d ("net/smc: handle unregistered buffers") Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 4ed591c8 ] The intent of ip6_route_check_nh_onlink is to make sure the gateway given for an onlink route is not actually on a connected route for a different interface (e.g., 2001:db8:1::/64 is on dev eth1 and then an onlink route has a via 2001:db8:1::1 dev eth2). If the gateway lookup hits the default route then it most likely will be a different interface than the onlink route which is ok. Update ip6_route_check_nh_onlink to disregard the device mismatch if the gateway lookup hits the default route. Turns out the existing onlink tests are passing because there is no default route or it is an unreachable default, so update the onlink tests to have a default route other than unreachable. Fixes: fc1e64e1 ("net/ipv6: Add support for onlink flag") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Jaime Caamaño Ruiz authored
[ Upstream commit 46ebe283 ] When there are both pop and push ethernet header actions among the actions to be applied to a packet, an unexpected EINVAL (Invalid argument) error is obtained. This is due to mac_proto not being reset correctly when those actions are validated. Reported-at: https://mail.openvswitch.org/pipermail/ovs-discuss/2018-October/047554.html Fixes: 91820da6 ("openvswitch: add Ethernet push and pop actions") Signed-off-by:
Jaime Caamaño Ruiz <jcaamano@suse.com> Tested-by:
Greg Rose <gvrose8192@gmail.com> Reviewed-by:
-
Tobias Jungel authored
[ Upstream commit 414dd6fb ] The attribute IFLA_BOND_AD_ACTOR_SYSTEM is sent to user space having the length of sizeof(bond->params.ad_actor_system) which is 8 byte. This patch aligns the length to ETH_ALEN to have the same MAC address exposed as using sysfs. Fixes: f87fda00 ("bonding: prevent out of bound accesses") Signed-off-by:
Tobias Jungel <tobias.jungel@gmail.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit ff002269 ] The idx in vhost_vring_ioctl() was controlled by userspace, hence a potential exploitation of the Spectre variant 1 vulnerability. Fixing this by sanitizing idx before using it to index d->vqs. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit da715775 ] When an FDB entry is configured, the address is validated to have the length of an Ethernet address, but the device for which the address is configured can be of any type. The above can result in the use of uninitialized memory when the address is later compared against existing addresses since 'dev->addr_len' is used and it may be greater than ETH_ALEN, as with ip6tnl devices. Fix this by making sure that FDB entries are only configured for Ethernet devices. BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863 CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x14b/0x190 lib/dump_stack.c:113 kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956 __msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645 memcmp+0x11d/0x180 lib/string.c:863 dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464 ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline] rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558 rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715 netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x440ee9 Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0 R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181 kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2718 [inline] __kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:996 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline] netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 v2: * Make error message more specific (David) Fixes: 090096bf ("net: generic fdb support for drivers without ndo_fdb_<op>") Signed-off-by:
-
Karsten Graul authored
[ Upstream commit 89ab066d ] This reverts commit dd979b4d. This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an internal TCP socket for the initial handshake with the remote peer. Whenever the SMC connection can not be established this TCP socket is used as a fallback. All socket operations on the SMC socket are then forwarded to the TCP socket. In case of poll, the file->private_data pointer references the SMC socket because the TCP socket has no file assigned. This causes tcp_poll to wait on the wrong socket. Signed-off-by:
-
Sean Tranchetti authored
[ Upstream commit db4f1be3 ] Current handling of CHECKSUM_COMPLETE packets by the UDP stack is incorrect for any packet that has an incorrect checksum value. udp4/6_csum_init() will both make a call to __skb_checksum_validate_complete() to initialize/validate the csum field when receiving a CHECKSUM_COMPLETE packet. When this packet fails validation, skb->csum will be overwritten with the pseudoheader checksum so the packet can be fully validated by software, but the skb->ip_summed value will be left as CHECKSUM_COMPLETE so that way the stack can later warn the user about their hardware spewing bad checksums. Unfortunately, leaving the SKB in this state can cause problems later on in the checksum calculation. Since the the packet is still marked as CHECKSUM_COMPLETE, udp_csum_pull_header() will SUBTRACT the checksum of the UDP header from skb->csum instead of adding it, leaving us with a garbage value in that field. Once we try to copy the packet to userspace in the udp4/6_recvmsg(), we'll make a call to skb_copy_and_csum_datagram_msg() to checksum the packet data and add it in the garbage skb->csum value to perform our final validation check. Since the value we're validating is not the proper checksum, it's possible that the folded value could come out to 0, causing us not to drop the packet. Instead, we believe that the packet was checksummed incorrectly by hardware since skb->ip_summed is still CHECKSUM_COMPLETE, and we attempt to warn the user with netdev_rx_csum_fault(skb->dev); Unfortunately, since this is the UDP path, skb->dev has been overwritten by skb->dev_scratch and is no longer a valid pointer, so we end up reading invalid memory. This patch addresses this problem in two ways: 1) Do not use the dev pointer when calling netdev_rx_csum_fault() from skb_copy_and_csum_datagram_msg(). Since this gets called from the UDP path where skb->dev has been overwritten, we have no way of knowing if the pointer is still valid. Also for the sake of consistency with the other uses of netdev_rx_csum_fault(), don't attempt to call it if the packet was checksummed by software. 2) Add better CHECKSUM_COMPLETE handling to udp4/6_csum_init(). If we receive a packet that's CHECKSUM_COMPLETE that fails verification (i.e. skb->csum_valid == 0), check who performed the calculation. It's possible that the checksum was done in software by the network stack earlier (such as Netfilter's CONNTRACK module), and if that says the checksum is bad, we can drop the packet immediately instead of waiting until we try and copy it to userspace. Otherwise, we need to mark the SKB as CHECKSUM_NONE, since the skb->csum field no longer contains the full packet checksum after the call to __skb_checksum_validate_complete(). Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing") Fixes: c84d9490 ("udp: copy skb->truesize in the first cache line") Cc: Sam Kumar <samanthakumar@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
Niklas Cassel authored
[ Upstream commit 30549aab ] When building stmmac, it is only possible to select CONFIG_DWMAC_GENERIC, or any of the glue drivers, when CONFIG_STMMAC_PLATFORM is set. The only exception is CONFIG_STMMAC_PCI. When calling of_mdiobus_register(), it will call our ->reset() callback, which is set to stmmac_mdio_reset(). Most of the code in stmmac_mdio_reset() is protected by a "#if defined(CONFIG_STMMAC_PLATFORM)", which will evaluate to false when CONFIG_STMMAC_PLATFORM=m. Because of this, the phy reset gpio will only be pulled when stmmac is built as built-in, but not when built as modules. Fix this by using "#if IS_ENABLED()" instead of "#if defined()". Signed-off-by:
Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by:
-
