- 10 Nov, 2016 15 commits
-
-
Arve Hjønnevåg authored
commit 0a3ffab9 upstream. Prevent using a binder_ref with only weak references where a strong reference is required. Signed-off-by:
Arve Hjønnevåg <arve@android.com> Signed-off-by:
Martijn Coenen <maco@android.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hui Wang authored
commit 6aecd871 upstream. They uses the codec ALC255, and have the different pin cfg definition from the ones in the existing pin quirk table. Now adding them into the table to fix the problem. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hui Wang authored
commit f771d5bb upstream. We have a new Dell laptop model which uses ALC295, the pin definition is different from the existing ones in the pin quirk table, to fix the headset mic detection and mic mute led's problem, we need to add the new pin defintion into the pin quirk table. Signed-off-by:
-
Ard Biesheuvel authored
commit 3ab7511e upstream. Commit 49d9e77e ("ALSA: hda - Fix system panic when DMA > 40 bits for Nvidia audio controllers") simply disabled any DMA exceeding 32 bits for NVidia devices, even though they are capable of performing DMA up to 40 bits. On some architectures (such as arm64), system memory is not guaranteed to be 32-bit addressable by PCI devices, and so this change prevents NVidia devices from working on platforms such as AMD Seattle. Since the original commit already mentioned that up to 40 bits of DMA is supported, and given that the code has been updated in the meantime to support a 40 bit DMA mask on other devices, revert commit 49d9e77e and explicitly set the DMA mask to 40 bits for NVidia devices. Fixes: 49d9e77e ('ALSA: hda - Fix system panic when DMA > 40 bits...') Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Takashi Iwai authored
commit 7d9a1808 upstream. AZX_DCAPS_RIRB_DELAY is dedicated only for Nvidia and its purpose is just to set a flag in bus. So it's better to be set in the toplevel driver, either hda_intel.c or hda_tegra.c, instead of the common hda_controller.c. This also allows us to strip this flag from dcaps, so save one more bit there. Signed-off-by:
-
Takashi Iwai authored
commit ef85f299 upstream. AZX_DCAPS_RIRB_PRE_DELAY is always tied with AZX_DCAPS_CTX_WORKAROUND, which is Creative's XFi specific. So, we can replace it and reduce one more bit free for DCAPS. Signed-off-by:
-
Marcel Hasler authored
commit bdc3478f upstream. The stk1160 chip needs QUIRK_AUDIO_ALIGN_TRANSFER. This patch resolves the issue reported on the mailing list (http://marc.info/?l=linux-sound&m=139223599126215&w=2) and also fixes bug 180071 (https://bugzilla.kernel.org/show_bug.cgi?id=180071). Signed-off-by:
Marcel Hasler <mahasler@gmail.com> Signed-off-by:
-
David Howells authored
commit 03dab869 upstream. This fixes CVE-2016-7042. Fix a short sprintf buffer in proc_keys_show(). If the gcc stack protector is turned on, this can cause a panic due to stack corruption. The problem is that xbuf[] is not big enough to hold a 64-bit timeout rendered as weeks: (gdb) p 0xffffffffffffffffULL/(60*60*24*7) $2 = 30500568904943 That's 14 chars plus NUL, not 11 chars plus NUL. Expand the buffer to 16 chars. I think the unpatched code apparently works if the stack-protector is not enabled because on a 32-bit machine the buffer won't be overflowed and on a 64-bit machine there's a 64-bit aligned pointer at one side and an int that isn't checked again on the other side. The panic incurred looks something like: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81352ebe CPU: 0 PID: 1692 Comm: reproducer Not tainted 4.7.2-201.fc24.x86_64 #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 0000000000000086 00000000fbbd2679 ffff8800a044bc00 ffffffff813d941f ffffffff81a28d58 ffff8800a044bc98 ffff8800a044bc88 ffffffff811b2cb6 ffff880000000010 ffff8800a044bc98 ffff8800a044bc30 00000000fbbd2679 Call Trace: [<ffffffff813d941f>] dump_stack+0x63/0x84 [<ffffffff811b2cb6>] panic+0xde/0x22a [<ffffffff81352ebe>] ? proc_keys_show+0x3ce/0x3d0 [<ffffffff8109f7f9>] __stack_chk_fail+0x19/0x30 [<ffffffff81352ebe>] proc_keys_show+0x3ce/0x3d0 [<ffffffff81350410>] ? key_validate+0x50/0x50 [<ffffffff8134db30>] ? key_default_cmp+0x20/0x20 [<ffffffff8126b31c>] seq_read+0x2cc/0x390 [<ffffffff812b6b12>] proc_reg_read+0x42/0x70 [<ffffffff81244fc7>] __vfs_read+0x37/0x150 [<ffffffff81357020>] ? security_file_permission+0xa0/0xc0 [<ffffffff81246156>] vfs_read+0x96/0x130 [<ffffffff81247635>] SyS_read+0x55/0xc0 [<ffffffff817eb872>] entry_SYSCALL_64_fastpath+0x1a/0xa4 Reported-by:
Ondrej Kozina <okozina@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Johannes Weiner authored
commit 89a28483 upstream. On 4.0, we saw a stack corruption from a page fault entering direct memory cgroup reclaim, calling into btrfs_releasepage(), which then tried to allocate an extent and recursed back into a kmem charge ad nauseam: [...] btrfs_releasepage+0x2c/0x30 try_to_release_page+0x32/0x50 shrink_page_list+0x6da/0x7a0 shrink_inactive_list+0x1e5/0x510 shrink_lruvec+0x605/0x7f0 shrink_zone+0xee/0x320 do_try_to_free_pages+0x174/0x440 try_to_free_mem_cgroup_pages+0xa7/0x130 try_charge+0x17b/0x830 memcg_charge_kmem+0x40/0x80 new_slab+0x2d9/0x5a0 __slab_alloc+0x2fd/0x44f kmem_cache_alloc+0x193/0x1e0 alloc_extent_state+0x21/0xc0 __clear_extent_bit+0x2b5/0x400 try_release_extent_mapping+0x1a3/0x220 __btrfs_releasepage+0x31/0x70 btrfs_releasepage+0x2c/0x30 try_to_release_page+0x32/0x50 shrink_page_list+0x6da/0x7a0 shrink_inactive_list+0x1e5/0x510 shrink_lruvec+0x605/0x7f0 shrink_zone+0xee/0x320 do_try_to_free_pages+0x174/0x440 try_to_free_mem_cgroup_pages+0xa7/0x130 try_charge+0x17b/0x830 mem_cgroup_try_charge+0x65/0x1c0 handle_mm_fault+0x117f/0x1510 __do_page_fault+0x177/0x420 do_page_fault+0xc/0x10 page_fault+0x22/0x30 On later kernels, kmem charging is opt-in rather than opt-out, and that particular kmem allocation in btrfs_releasepage() is no longer being charged and won't recurse and overrun the stack anymore. But it's not impossible for an accounted allocation to happen from the memcg direct reclaim context, and we needed to reproduce this crash many times before we even got a useful stack trace out of it. Like other direct reclaimers, mark tasks in memcg reclaim PF_MEMALLOC to avoid recursing into any other form of direct reclaim. Then let recursive charges from PF_MEMALLOC contexts bypass the cgroup limit. Link: http://lkml.kernel.org/r/20161025141050.GA13019@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alexander Polakov authored
commit 1bc11d70 upstream. As described in https://bugzilla.kernel.org/show_bug.cgi?id=177821: After some analysis it seems to be that the problem is in alloc_super(). In case list_lru_init_memcg() fails it goes into destroy_super(), which calls list_lru_destroy(). And in list_lru_init() we see that in case memcg_init_list_lru() fails, lru->node is freed, but not set NULL, which then leads list_lru_destroy() to believe it is initialized and call memcg_destroy_list_lru(). memcg_destroy_list_lru() in turn can access lru->node[i].memcg_lrus, which is NULL. [akpm@linux-foundation.org: add comment] Signed-off-by:
Alexander Polakov <apolyakov@beget.ru> Acked-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Darrick J. Wong authored
commit 58d78967 upstream. The function xfs_calc_dquots_per_chunk takes a parameter in units of basic blocks. The kernel seems to get the units wrong, but userspace got 'fixed' by commenting out the unnecessary conversion. Fix both. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Mark Rutland authored
commit 21753583 upstream. Back in commit f56141e3 ("all arches, signal: move restart_block to struct task_struct"), all architectures and core code were changed to use task_struct::restart_block. However, when h8300 support was subsequently restored in v4.2, it was not updated to account for this, and maintains thread_info::restart_block, which is not kept in sync. This patch drops the redundant restart_block from thread_info, and moves h8300 to the common one in task_struct, ensuring that syscall restarting always works as expected. Fixes: f56141e3 ("all arches, signal: move restart_block to struct task_struct") Link: http://lkml.kernel.org/r/1476714934-11635-1-git-send-email-mark.rutland@arm.comSigned-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp Signed-off-by:
-
Ville Syrjälä authored
commit 36e3fa6a upstream. The i2c adapter is only relevant for some peer device types, so let's clear the pdt if it's still the same as the old_pdt when we tear down the i2c adapter. I don't really like this design pattern of updating port->whatever before doing the accompanying changes and passing around old_whatever to figure stuff out. Would make much more sense to me to the pass the new value around and only update the port->whatever when things are consistent. But let's try to work with what we have right now. Quoting a follow-up from Ville: "And naturally I forgot to amend the commit message w.r.t. this guy [the change in drm_dp_destroy_port]. We don't really need to do this here, but I figured I'd try to be a bit more consistent by having it, just to avoid accidental mistakes if/when someone changes this stuff again later." v2: Clear port->pdt in the caller, if needed (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
Carlos Santa <carlos.santa@intel.com> Tested-by:
Kirill A. Shutemov <kirill@shutemov.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477488633-16544-1-git-send-email-ville.syrjala@linux.intel.comSigned-off-by:
-
Vladimir Zapolskiy authored
commit 147b36d5 upstream. Race condition between registering an I2C device driver and deregistering an I2C adapter device which is assumed to manage that I2C device may lead to a NULL pointer dereference due to the uninitialized list head of driver clients. The root cause of the issue is that the I2C bus may know about the registered device driver and thus it is matched by bus_for_each_drv(), but the list of clients is not initialized and commonly it is NULL, because I2C device drivers define struct i2c_driver as static and clients field is expected to be initialized by I2C core: i2c_register_driver() i2c_del_adapter() driver_register() ... bus_add_driver() ... ... bus_for_each_drv(..., __process_removed_adapter) ... i2c_do_del_adapter() ... list_for_each_entry_safe(..., &driver->clients, ...) INIT_LIST_HEAD(&driver->clients); To solve the problem it is sufficient to do clients list head initialization before calling driver_register(). The problem was found while using an I2C device driver with a sluggish registration routine on a bus provided by a physically detachable I2C master controller, but practically the oops may be reproduced under the race between arbitraty I2C device driver registration and managing I2C bus device removal e.g. by unbinding the latter over sysfs: % echo 21a4000.i2c > /sys/bus/platform/drivers/imx-i2c/unbind Unable to handle kernel NULL pointer dereference at virtual address 00000000 Internal error: Oops: 17 [#1] SMP ARM CPU: 2 PID: 533 Comm: sh Not tainted 4.9.0-rc3+ #61 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: e5ada400 task.stack: e4936000 PC is at i2c_do_del_adapter+0x20/0xcc LR is at __process_removed_adapter+0x14/0x1c Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 35bd004a DAC: 00000051 Process sh (pid: 533, stack limit = 0xe4936210) Stack: (0xe4937d28 to 0xe4938000) Backtrace: [<c0667be0>] (i2c_do_del_adapter) from [<c0667cc0>] (__process_removed_adapter+0x14/0x1c) [<c0667cac>] (__process_removed_adapter) from [<c0516998>] (bus_for_each_drv+0x6c/0xa0) [<c051692c>] (bus_for_each_drv) from [<c06685ec>] (i2c_del_adapter+0xbc/0x284) [<c0668530>] (i2c_del_adapter) from [<bf0110ec>] (i2c_imx_remove+0x44/0x164 [i2c_imx]) [<bf0110a8>] (i2c_imx_remove [i2c_imx]) from [<c051a838>] (platform_drv_remove+0x2c/0x44) [<c051a80c>] (platform_drv_remove) from [<c05183d8>] (__device_release_driver+0x90/0x12c) [<c0518348>] (__device_release_driver) from [<c051849c>] (device_release_driver+0x28/0x34) [<c0518474>] (device_release_driver) from [<c0517150>] (unbind_store+0x80/0x104) [<c05170d0>] (unbind_store) from [<c0516520>] (drv_attr_store+0x28/0x34) [<c05164f8>] (drv_attr_store) from [<c0298acc>] (sysfs_kf_write+0x50/0x54) [<c0298a7c>] (sysfs_kf_write) from [<c029801c>] (kernfs_fop_write+0x100/0x214) [<c0297f1c>] (kernfs_fop_write) from [<c0220130>] (__vfs_write+0x34/0x120) [<c02200fc>] (__vfs_write) from [<c0221088>] (vfs_write+0xa8/0x170) [<c0220fe0>] (vfs_write) from [<c0221e74>] (SyS_write+0x4c/0xa8) [<c0221e28>] (SyS_write) from [<c0108a20>] (ret_fast_syscall+0x0/0x1c) Signed-off-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Hoan Tran authored
commit 60361601 upstream. SMBus block command uses the first byte of buffer for the data length. The dma_buffer should be increased by 1 to avoid the overrun issue. Reported-by:
Phil Endecott <phil_gjouf_endecott@chezphil.org> Signed-off-by:
Hoan Tran <hotran@apm.com> Signed-off-by:
-
- 01 Nov, 2016 3 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 9d25c78e which is 1c109fab upstream Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit fcf5e519 which is 548acf19 upstream. Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
- 31 Oct, 2016 22 commits
-
-
Greg Kroah-Hartman authored
-
Robert Jarzmik authored
commit 9ba63e3c upstream. Since its initial commit, the driver is buggy for multiple interrupts handling. The translation from the former lubbock.c file was not complete, and might stall all interrupt handling when multiple interrupts occur. This is especially true when inside the interrupt handler and if a new interrupt comes and is not handled, leaving the output line still held, and not creating a transition as the GPIO block behind would expect to trigger another cplds_irq_handler() call. For the record, the hardware is working as follows. The interrupt mechanism relies on : - one status register - one mask register Let's suppose the input irq lines are called : - i_sa1111 - i_lan91x - i_mmc_cd Let's suppose the status register for each irq line is called : - status_sa1111 - status_lan91x - status_mmc_cd Let's suppose the interrupt mask for each irq line is called : - irqen_sa1111 - irqen_lan91x - irqen_mmc_cd Let's suppose the output irq line, connected to GPIO0 is called : - o_gpio0 The behavior is as follows : - o_gpio0 = not((status_sa1111 & irqen_sa1111) | (status_lan91x & irqen_lan91x) | (status_mmc_cd & irqen_mmc_cd)) => this is a N-to-1 NOR gate and multiple AND gates - irqen_* is exactly as programmed by a write to the FPGA - status_* behavior is governed by a bi-stable D flip-flop => on next FPGA clock : - if i_xxx is high, status_xxx becomes 1 - if i_xxx is low, status_xxx remains as it is - if software sets status_xxx to 0, the D flip-flop is reset => status_xxx becomes 0 => on next FPGA clock cycle, if i_xxx is high, status_xxx becomes 1 again Fixes: fc9e38c0 ("ARM: pxa: lubbock: use new pxa_cplds driver") Reported-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Pan Xinhui authored
commit 11b7e154 upstream. When we merge two contiguous partitions whose signatures are marked NVRAM_SIG_FREE, We need update prev's length and checksum, then write it to nvram, not cur's. So lets fix this mistake now. Also use memset instead of strncpy to set the partition's name. It's more readable if we want to fill up with duplicate chars . Fixes: fa2b4e54 ("powerpc/nvram: Improve partition removal") Signed-off-by:
Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Johannes Thumshirn authored
commit 0d667f72 upstream. In _scsih_io_done() we test if the ioc->logging_level does _not_ have the MPT_DEBUG_REPLY bit set and if it hasn't we print the debug messages. This unfortunately is the wrong way around. Note, the actual bug is older than af009411 but this commit removed the CONFIG_SCSI_MPT3SAS_LOGGING Kconfig option which hid the bug. Fixes: af009411 'mpt2sas, mpt3sas: Remove SCSI_MPTXSAS_LOGGING entry from Kconfig' Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 432746f8 upstream. When we call symbol__fixup_duplicate() we use algorithms to pick the "best" symbols for cases where there are various functions/aliases to an address, and those check zero size symbols, which, before calling symbol__fixup_end() are _all_ symbols in a just parsed kallsyms file. So first fixup the end, then fixup the duplicates. Found while trying to figure out why 'perf test vmlinux' failed, see the output of 'perf test -v vmlinux' to see cases where the symbols picked as best for vmlinux don't match the ones picked for kallsyms. Cc: Anton Blanchard <anton@samba.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 694bf407 ("perf symbols: Add some heuristics for choosing the best duplicate symbol") Link: http://lkml.kernel.org/n/tip-rxqvdgr0mqjdxee0kf8i2ufn@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit c97b40e4 upstream. We can allow aliases to be kept, but we were checking this just when loading vmlinux files, be consistent, do it for any symbol table loading code that calls symbol__fixup_duplicate() by making this function check .allow_aliases instead. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 680d926a ("perf symbols: Allow symbol alias when loading map for symbol name") Link: http://lkml.kernel.org/n/tip-z0avp0s6cfjckc4xj3pdfjdz@git.kernel.orgSigned-off-by:
-
Namhyung Kim authored
commit d9ea48bc upstream. Milian reported that the event group on TUI shows duplicated overhead. This was due to a bug on calculating hpp->buf position. The hpp_advance() was called from __hpp__slsmg_color_printf() on TUI but it's already called from the hpp__call_print_fn macro in __hpp__fmt(). The end result is that the print function returns number of bytes it printed but the buffer advanced twice of the length. This is generally not a problem since it doesn't need to access the buffer again. But with event group, overhead needs to be printed multiple times and hist_entry__snprintf_alignment() tries to fill the space with buffer after it printed. So it (brokenly) showed the last overhead again. The bug was there from the beginning, but I think it's only revealed when the alignment function was added. Reported-by:
Milian Wolff <milian.wolff@kdab.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 89fee709 ("perf hists: Do column alignment on the format iterator") Link: http://lkml.kernel.org/r/20160912061958.16656-2-namhyung@kernel.orgSigned-off-by:
-
Geert Uytterhoeven authored
commit 2cf9a578 upstream. clk-divider uses clk_readl()/clk_writel() everywhere, except in clk_divider_round_rate(), where plain readl() is used. Change this to clk_readl(), as it makes a difference on powerpc. Fixes: e6d5e7d9 ("clk-divider: Fix READ_ONLY when divider > 1") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Tang Yuantian authored
commit 8964193f upstream. The offset of Core Cluster clock control/status register on cluster group V3 version is different from others, and should be plus 0x70000. Signed-off-by:
Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by:
Scott Wood <oss@buserror.net> Fixes: 9e19ca2f ("clk: qoriq: Add ls2080a support.") Signed-off-by:
-
Sascha Silbe authored
commit 6cd997db upstream. con3270 contains an optimisation that reduces the amount of data to be transmitted to the 3270 terminal by putting a Repeat to Address (RA) order into the data stream. The RA order itself takes up space, so con3270 only uses it if there's enough space left in the line buffer. Otherwise it just pads out the line manually. For lines that were _just_ short enough that the RA order still fit in the line buffer, the line was instead padded with an insufficient amount of spaces. This was caused by examining the size of the allocated line buffer rather than the length of the string to be displayed. For con3270_cline_end(), we just compare against the line length. For con3270_update_string() however that isn't available anymore, so we check whether the Repeat to Address order is present. Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Tested-by:
Jing Liu <liujbjl@linux.vnet.ibm.com> Tested-by:
Yang Chen <bjcyang@linux.vnet.ibm.com> Signed-off-by:
Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Sascha Silbe authored
commit c14f2aac upstream. con3270 contains an optimisation that reduces the amount of data to be transmitted to the 3270 terminal by putting a Repeat to Address (RA) order into the data stream. The RA order itself takes up space, so con3270 only uses it if there's enough space left in the line buffer. Otherwise it just pads out the line manually. For lines too long to include the RA order, one byte was left uninitialised. This was caused by an off-by-one bug in the loop that pads out the line. Since the buffer is allocated from a common pool, the single byte left uninitialised contained some previous buffer content. Usually this was just a space or some character (which can result in clutter but is otherwise harmless). Sometimes, however, it was a Repeat to Address order, messing up the entire screen layout and causing the display to send the entire buffer content on every keystroke. Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Reported-by:
-
Sebastian Ott authored
commit d53c51f2 upstream. Since commit 9f3d6d7a chsc_get_channel_measurement_chars is called with interrupts disabled during resume from hibernate. Since this function used spin_unlock_irq, interrupts have been enabled accidentally. Fix this by using the irqsave variant. Since we can't guarantee the IRQ-enablement state for all (future/ external) callers, change the locking in related functions to prevent similar bugs in the future. Fixes: 9f3d6d7a ("s390/cio: update measurement characteristics") Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
-
Tony Luck authored
commit 548acf19 upstream. Huge amounts of help from Andy Lutomirski and Borislav Petkov to produce this. Andy provided the inspiration to add classes to the exception table with a clever bit-squeezing trick, Boris pointed out how much cleaner it would all be if we just had a new field. Linus Torvalds blessed the expansion with: ' I'd rather not be clever in order to save just a tiny amount of space in the exception table, which isn't really criticial for anybody. ' The third field is another relative function pointer, this one to a handler that executes the actions. We start out with three handlers: 1: Legacy - just jumps the to fixup IP 2: Fault - provide the trap number in %ax to the fixup code 3: Cleaned up legacy for the uaccess error hack Signed-off-by:
Tony Luck <tony.luck@intel.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f6af78fcbd348cf4939875cfda9c19689b5e50b8.1455732970.git.tony.luck@intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 86c7e683 upstream. A workaround for a warning introduced a use of the NO_IRQ macro that should have been gone for a long time. It is clear from the code that the value cannot actually be used, but apparently there was a configuration at some point that caused a warning, so instead of just reverting that patch, this rearranges the code in a way that the warning cannot reappear. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 6ef41cf6 ("dmaengine :ipu: change ipu_irq_handler() to remove compile warning") Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Georges Savoundararadj authored
commit 06107359 upstream. bq->charger is initialized in bq24257_power_supply_init. Therefore, bq24257_power_supply_init should be called before the registration of the IRQ handler bq24257_irq_handler_thread that calls power_supply_changed(bq->charger). Signed-off-by:
Georges Savoundararadj <savoundg@gmail.com> Cc: Aurelien Chanot <chanot.a@gmail.com> Cc: Andreas Dannenberg <dannenberg@ti.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Fixes: 2219a935 ("power_supply: Add TI BQ24257 charger driver") Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Larry Finger authored
commit 1335a951 upstream. Commit fadbe0cd ("staging: rtl8188eu: Remove rtw_zmalloc(), wrapper for kzalloc()") changed all allocation calls to be GFP_KERNEL even though the original wrapper was testing to determine if the caller was in atomic mode. Most of the mistakes were corrected with commit 33dc85c3 ("staging: r8188eu: Fix scheduling while atomic error introduced in commit fadbe0cd"); however, two kzalloc calls were missed as the call only happens when the driver is shutting down. Fixes: fadbe0cd ("staging: rtl8188eu: Remove rtw_zmalloc(), wrapper for kzalloc()") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: navin patidar <navin.patidar@gmail.com> Signed-off-by:
-
Chen-Yu Tsai authored
commit a3930ed0 upstream. Commit d88429a6 ("ASoC: dapm: Add output driver widget") added the snd_soc_dapm_out_drv ID for the output driver widget, which is the same as the PGA widget, with a later power sequence number. Commit 19a2557b ("ASoC: dapm: Add kcontrol support for PGAs") then added kcontrol support for PGA widgets, but failed to account for output driver widgets. Attempts to use kcontrols with output driver widgets result in silent failures, with the developer having little idea about what went on. Add snd_soc_dapm_out_drv to the switch/case block under snd_soc_dapm_pga in dapm_create_or_share_kcontrol, since they are essentially the same. Fixes: 19a2557b (ASoC: dapm: Add kcontrol support for PGAs) Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Chen-Yu Tsai authored
commit 071133a2 upstream. The value for the second channel in _ENUM_DOUBLE (double channel) MUXs is not correctly updated, due to using the wrong bit shift. Use the correct bit shift, so both channels toggle together. Fixes: 3727b496 (ASoC: dapm: Consolidate MUXs and value MUXs) Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Chen-Yu Tsai authored
commit 01ad5e7d upstream. If soc_dapm_read() fails, val will be uninitialized, and bogus values will be written later: ret = soc_dapm_read(dapm, reg, &val); val = (val >> shift) & mask; However, the compiler does not give a warning. Return on error before val is really used to avoid this. This is similar to the commit 69128316 ("ASoC: dapm: Fix uninitialized variable in snd_soc_dapm_get_enum_double()") Fixes: ce0fc93a (ASoC: Add DAPM support at the component level) Signed-off-by:
-
Wei Yongjun authored
commit 8ae3ea48 upstream. Fix to return error code -ENOMEM instead of 0 when failed to create widget, as done elsewhere in this function. Fixes: 8a978234 ("ASoC: topology: Add topology core") Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
-
Dave Gerlach authored
commit ad8529fd upstream. Currently omap-rng checks the return value of pm_runtime_get_sync and reports failure if anything is returned, however it should be checking if ret < 0 as pm_runtime_get_sync return 0 on success but also can return 1 if the device was already active which is not a failure case. Only values < 0 are actual failures. Fixes: 61dc0a44 ("hwrng: omap - Fix assumption that runtime_get_sync will always succeed") Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ard Biesheuvel authored
commit ed4767d6 upstream. Since commit 8996eafd ("crypto: ahash - ensure statesize is non-zero"), all ahash drivers are required to implement import()/export(), and must have a non-zero statesize. Fix this for the ARM Crypto Extensions GHASH implementation. Fixes: 8996eafd ("crypto: ahash - ensure statesize is non-zero") Signed-off-by:
-
