- 23 Dec, 2008 3 commits
-
-
Steven Whitehouse authored
The pages used in lowcomms are not highmem, so kmap is not necessary. Cc: Christine Caulfield <ccaulfie@redhat.com> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
David Teigland <teigland@redhat.com>
-
Harvey Harrison authored
fs/dlm/dir.c:419:14: warning: incorrect type in assignment (different base types) fs/dlm/dir.c:419:14: expected unsigned short [unsigned] [addressable] [assigned] [usertype] be_namelen fs/dlm/dir.c:419:14: got restricted __be16 [usertype] <noident> Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Steven Whitehouse authored
Use ls_allocation for memory allocations, which a cluster fs sets to GFP_NOFS. Use GFP_NOFS for allocations when no lockspace struct is available. Taking dlm locks needs to avoid calling back into the cluster fs because write-out can require taking dlm locks. Cc: Christine Caulfield <ccaulfie@redhat.com> Signed-off-by:
-
- 13 Nov, 2008 37 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: ignore bit0 of _OSC return code
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: fix shutdown cleanup
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slab: document SLAB_DESTROY_BY_RCU Kconfig: SLUB is the default slab allocator
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] cdb89712: avoid namespace clashes with SRAM_ and BOOTROM_ constants [ARM] cdb89712,clps7500,h720x: avoid namespace clash for FLASH_* constants [ARM] integrator,realview,versatile: remove FLASH_* and EPROM_* constants [ARM] dma-mapping: fix compiler warning [ARM] iop: iop3xx needs registers mapped uncached+unbuffered [ARM] versatile: correct MMC clock rate [ARM] realview: correct MMC clock rate [ARM] 5329/1: Feroceon: fix feroceon_l2_inv_range
-
Helge Deller authored
Commit 2d3854a3 ("cpumask: introduce new API, without changing anything") introduced a build breakage on parisc. This trivial patch fixes it. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kyle Mc Martin <kyle@hera.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Teigland authored
Fixes a regression from commit 0f8e0d9a, "dlm: allow multiple lockspace creates". An extraneous 'else' slipped into a code fragment being moved from release_lockspace() to dlm_release_lockspace(). The result of the unwanted 'else' is that dlm threads and structures are not stopped and cleaned up when the final dlm lockspace is removed. Trying to create a new lockspace again afterward will fail with "kmem_cache_create: duplicate cache dlm_conn" because the cache was not previously destroyed. Signed-off-by:
-
Peter Zijlstra authored
Explain this SLAB_DESTROY_BY_RCU thing... [hugh@veritas.com: add a pointer to comment in mm/slab.c] Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Jens Axboe <jens.axboe@oracle.com> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Christoph Lameter <cl@linux-foundation.org> Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi>
-
Simon Arlott authored
In 2007, a0acd820 changed the default slab allocator to SLUB, but the SLAB help text still says SLAB is the default. This change fixes that. Signed-off-by:
Simon Arlott <simon@fire.lp0.eu> Signed-off-by:
-
Russell King authored
Signed-off-by:Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Signed-off-by: -
Russell King authored
FLASH_* and EPROM_* constants are unused, and clash with drivers: drivers/atm/ambassador.h:257:1: warning: "FLASH_BASE" redefined drivers/atm/ambassador.h:258:1: warning: "FLASH_SIZE" redefined drivers/atm/iphase.h:332:1: warning: "EPROM_SIZE" redefined so remove them. Signed-off-by: -
Russell King authored
arch/arm/mm/dma-mapping.c: In function `dma_sync_sg_for_cpu': arch/arm/mm/dma-mapping.c:588: warning: statement with no effect Signed-off-by: -
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: fix init_idle()'s use of sched_clock() sched: fix stale value in average load per task
-
Rodolfo Giometti authored
Signed-off-by:
Rodolfo Giometti <giometti@linux.it> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Rodolfo Giometti authored
C2port implements a two wire serial communication protocol (bit banging) designed to enable in-system programming, debugging, and boundary-scan testing on low pin-count Silicon Labs devices. Currently this code supports only flash programming through sysfs interface but extensions shoud be easy to add. Signed-off-by:
-
Madhusudhan Chikkature authored
Add a brief document about omap2430/3430 HDQ/1-wire driver. Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com> Acked-by:
Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
Madhusudhan Chikkature authored
Provide the BQ27000 slave interface driver. Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com> Acked-by:
-
Madhusudhan Chikkature authored
The HDQ/1-Wire module of TI OMAP2430/3430 platforms implement the hardware protocol of the master functions of the Benchmark HDQ and the Dallas Semiconductor 1-Wire protocols. These protocols use a single wire for communication between the master (HDQ/1-Wire controller) and the slave (HDQ/1-Wire external compliant device). This patch provides the HDQ driver to suppport TI OMAP2430/3430 platforms. Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com> Acked-by:
Felipe Balbi <felipe.balbi@nokia.com> Acked-by:
-
Madhusudhan Chikkature authored
Export the w1_read_8 function for use of drivers. The OMAP HDQ driver(drivers/w1/masters/omap_hdq.c) uses this function. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com> Acked-by:
-
Mark Jackson authored
Add support for the Dallas DS1390/93/94 SPI RTC chip. Signed-off-by:
Mark Jackson <mpfj@mimc.co.uk> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Martyn Welch authored
Provide the basic "get" and "set" functionality for the Epson RX-8581 I2C RTC. It currently does not support the RTC's Alarm or Fixed-cycle timer. [akpm@linux-foundation.org: need log2.h for ilog2(), remove unneeded initialisation] Signed-off-by:
Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by:
-
Mark Brown authored
This adds support for the RTC provided by the Wolfson Microelectronics WM8350. This driver was originally written by Graeme Gregory and Liam Girdwood, though it has been modified since then to update it to current mainline coding standards and for API completeness. [akpm@linux-foundation.org: s/schedule_timeout_interruptible/schedule_timeout_uninterruptible/ to prevent bogus timeout when signal_pending()] Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Liam Girdwood <linux@wolfsonmicro.com> Signed-off-by:
-
Darrick J. Wong authored
The ics932s401 is a clock generator chip. This driver allows users to read the current clock outputs. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
-
Darrick J. Wong authored
New driver to play with. As Jean mentioned a couple of years ago, this chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13 voltage sensors. This driver has been tested on an IntelliStation Z30. Signed-off-by:
-
Pavel Machek authored
This adds a driver to the accelerometer sensor found in several HP laptops (under the commercial names of "HP Mobile Data Protection System 3D" and "HP 3D driveguard"). It tries to have more or less the same interfaces as the hdaps and other accelerometer drivers: in sysfs and as a joystick. This driver was first written by Yan Burman. Eric Piel has updated it and slimed it up (including the removal of an interface to access to the free-fall feature of the sensor because it is not reliable enough for now). Pavel Machek removed few more features and switched locking from semaphore to mutex. Several people have contributed to the database of the axes. [eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API] Signed-off-by:
Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by:
Yan Burman <burman.yan@gmail.com> Signed-off-by:
Pavel Machek <pavel@suse.cz> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
The start pfn calculation in page_cgroup's memory hotplug notifier chain is wrong. Tested-by:
Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Theodore Tso authored
Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Jean-Christophe Lallemand authored
We're working with an AT91SAM9263 Rev B in our design and I experienced some inconsistency in spi-based touchscreen usage between our board and the Atmel evaluation kit we have that runs on a Rev A chip. The data was apparently delayed by 1 byte and got ridiculous data out of the touchscreen driver, very strange. As everything looked normal in the spi, touchscreen and dma logs, I contacted the Atmel support and they triggered me on a new HW bug that appeared in the Rev B SPI controller. The problem is that the SPI controller on the Rev B needs that the software reset is performed two times so that it's performed correctly. Applying the patch below solves the issue on my Rev B board. I've tested it as well on my Rev A evaluation kit and it has apparently no unwanted side effect, things continue to work as expected. Signed-off-by:
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Darrick J. Wong authored
The adt7468 is a follow-on to the adt7463, so plumb in adt7468 support along the same code paths. Signed-off-by:
-
Darrick J. Wong authored
Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by:
-
Darrick J. Wong authored
Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by:
-
Andrew Morton authored
We only need the cacheline padding on SMP kernels. Saves 6k: text data bss dec hex filename 5713 388 8840 14941 3a5d kernel/kprobes.o 5713 388 2632 8733 221d kernel/kprobes.o Acked-by:
Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
-
Marco Stornelli authored
xip documentation updated: - change "get_xip_page" to "get_xip_mem"; - explain changed function parameters Signed-off-by:
Marco Stornelli <marco.stornelli@gmail.com> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Randy Dunlap authored
Add printk-formats.txt so that we don't have to keep fixing the same things over and over again. <wishful thinking> Signed-off-by:
-
Andrew Morton authored
It mistakenly assumes that a static local in an inlined function is a kernel-wide singleton. It also has no callers, so let's remove it. Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by:
-
Eric W. Biederman authored
In the last refactoring of shrink_submounts a variable was not completely renamed. So finish the renaming of mnt to m now. Without this if you attempt to mount an nfs mount that has both automatic nfs sub mounts on it, and has normal mounts on it. The unmount will succeed when it should not. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@ZenIV.linux.org.uk Signed-off-by:
-
KOSAKI Motohiro authored
lockdep warns about following message at boot time on one of my test machine. Then, schedule_on_each_cpu() sholdn't be called when the task have mmap_sem. Actually, lru_add_drain_all() exist to prevent the unevictalble pages stay on reclaimable lru list. but currenct unevictable code can rescue unevictable pages although it stay on reclaimable list. So removing is better. In addition, this patch add lru_add_drain_all() to sys_mlock() and sys_mlockall(). it isn't must. but it reduce the failure of moving to unevictable list. its failure can rescue in vmscan later. but reducing is better. Note, if above rescuing happend, the Mlocked and the Unevictable field mismatching happend in /proc/meminfo. but it doesn't cause any real trouble. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.28-rc2-mm1 #2 ------------------------------------------------------- lvm/1103 is trying to acquire lock: (&cpu_hotplug.lock){--..}, at: [<c0130789>] get_online_cpus+0x29/0x50 but task is already holding lock: (&mm->mmap_sem){----}, at: [<c01878ae>] sys_mlockall+0x4e/0xb0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_sem){----}: [<c0153da2>] check_noncircular+0x82/0x110 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0156161>] validate_chain+0xb11/0x1070 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 (*) grab mmap_sem [<c0185e6a>] might_fault+0x4a/0xa0 [<c0185e9b>] might_fault+0x7b/0xa0 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0294dd0>] copy_to_user+0x30/0x60 [<c01ae3ec>] filldir+0x7c/0xd0 [<c01e3a6a>] sysfs_readdir+0x11a/0x1f0 (*) grab sysfs_mutex [<c01ae370>] filldir+0x0/0xd0 [<c01ae370>] filldir+0x0/0xd0 [<c01ae4c6>] vfs_readdir+0x86/0xa0 (*) grab i_mutex [<c01ae75b>] sys_getdents+0x6b/0xc0 [<c010355a>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff -> #2 (sysfs_mutex){--..}: [<c0153da2>] check_noncircular+0x82/0x110 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c0156161>] validate_chain+0xb11/0x1070 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 (*) grab sysfs_mutex [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e422f>] create_dir+0x3f/0x90 [<c01e42a9>] sysfs_create_dir+0x29/0x50 [<c04faaf5>] _spin_unlock+0x25/0x40 [<c028f21d>] kobject_add_internal+0xcd/0x1a0 [<c028f37a>] kobject_set_name_vargs+0x3a/0x50 [<c028f41d>] kobject_init_and_add+0x2d/0x40 [<c019d4d2>] sysfs_slab_add+0xd2/0x180 [<c019d580>] sysfs_add_func+0x0/0x70 [<c019d5dc>] sysfs_add_func+0x5c/0x70 (*) grab slub_lock [<c01400f2>] run_workqueue+0x172/0x200 [<c014008f>] run_workqueue+0x10f/0x200 [<c0140bd0>] worker_thread+0x0/0xf0 [<c0140c6c>] worker_thread+0x9c/0xf0 [<c0143c80>] autoremove_wake_function+0x0/0x50 [<c0140bd0>] worker_thread+0x0/0xf0 [<c0143972>] kthread+0x42/0x70 [<c0143930>] kthread+0x0/0x70 [<c01042db>] kernel_thread_helper+0x7/0x1c [<ffffffff>] 0xffffffff -> #1 (slub_lock){----}: [<c0153d2d>] check_noncircular+0xd/0x110 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c0156161>] validate_chain+0xb11/0x1070 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c015433d>] mark_lock+0x35d/0xd00 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c04f93a3>] down_read+0x43/0x80 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 (*) grab slub_lock [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c04fd9ac>] notifier_call_chain+0x3c/0x70 [<c04f5454>] _cpu_up+0x84/0x110 [<c04f552b>] cpu_up+0x4b/0x70 (*) grab cpu_hotplug.lock [<c06d1530>] kernel_init+0x0/0x170 [<c06d15e5>] kernel_init+0xb5/0x170 [<c06d1530>] kernel_init+0x0/0x170 [<c01042db>] kernel_thread_helper+0x7/0x1c [<ffffffff>] 0xffffffff -> #0 (&cpu_hotplug.lock){--..}: [<c0155bff>] validate_chain+0x5af/0x1070 [<c040f7e0>] dev_status+0x0/0x50 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c0130789>] get_online_cpus+0x29/0x50 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c0130789>] get_online_cpus+0x29/0x50 [<c0130789>] get_online_cpus+0x29/0x50 [<c017bc30>] lru_add_drain_per_cpu+0x0/0x10 [<c0130789>] get_online_cpus+0x29/0x50 (*) grab cpu_hotplug.lock [<c0140cf2>] schedule_on_each_cpu+0x32/0xe0 [<c0187095>] __mlock_vma_pages_range+0x85/0x2c0 [<c0156945>] __lock_acquire+0x285/0xa10 [<c0188f09>] vma_merge+0xa9/0x1d0 [<c0187450>] mlock_fixup+0x180/0x200 [<c0187548>] do_mlockall+0x78/0x90 (*) grab mmap_sem [<c01878e1>] sys_mlockall+0x81/0xb0 [<c010355a>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff other info that might help us debug this: 1 lock held by lvm/1103: #0: (&mm->mmap_sem){----}, at: [<c01878ae>] sys_mlockall+0x4e/0xb0 stack backtrace: Pid: 1103, comm: lvm Not tainted 2.6.28-rc2-mm1 #2 Call Trace: [<c01555fc>] print_circular_bug_tail+0x7c/0xd0 [<c0155bff>] validate_chain+0x5af/0x1070 [<c040f7e0>] dev_status+0x0/0x50 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c0130789>] get_online_cpus+0x29/0x50 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c0130789>] get_online_cpus+0x29/0x50 [<c0130789>] get_online_cpus+0x29/0x50 [<c017bc30>] lru_add_drain_per_cpu+0x0/0x10 [<c0130789>] get_online_cpus+0x29/0x50 [<c0140cf2>] schedule_on_each_cpu+0x32/0xe0 [<c0187095>] __mlock_vma_pages_range+0x85/0x2c0 [<c0156945>] __lock_acquire+0x285/0xa10 [<c0188f09>] vma_merge+0xa9/0x1d0 [<c0187450>] mlock_fixup+0x180/0x200 [<c0187548>] do_mlockall+0x78/0x90 [<c01878e1>] sys_mlockall+0x81/0xb0 [<c010355a>] syscall_call+0x7/0xb Signed-off-by:KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Tested-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
